The conditions of Fausto Gresini – who was transported to the Carlo Alberto Pizzardi hospital in Bologna on December 30th – are slightly improving.
After his arrival at the hospital (Intensive Care Department of Prof. Cilloni) with very low blood oxygen saturation levels, the Gresini Racing Team Principal was induced into a pharmacological coma and received an endotracheal intubation to help organs oxygenation.
During the last few hours, in light of stable and improving general conditions, the doctors decided to begin a slow awakening process to allow independent lung ventilation.
It gives me the greatest honor to welcome our newest and final team member at BARTCON Racing for the 2021 MotoAmerica Season – Ryne Snooks.
Next year, Ryne will be racing his Yamaha FZ-07 in the Twins Cup along with his teammate Cooper McDonald.
For those of you who have not yet had the pleasure of meeting Ryne, let me tell you a little bit about him and how he came to end up racing for BARTCON Racing Team.
Ryne Snooks. Photo by Brian J. Nelson, courtesy BARTCON Racing.
Ryne has been competing in MotoAmerica for a couple of years now and for the most part has been doing it alone with the help of a few good friends. Ryne along with his family and friends always managed to make it over to the BARTCON paddock to wind down after race day, and needless to say, we all became great friends very quickly.
Ryne was always willing to help anyone around him on race weekends that needed help, so when he came to me about the possibility of riding out of the BARTCON Racing paddock set-up it was an instant YES!
As most of you May know, BARTCON Racing along with one of our primary sponsors, Coastal Neurosurgery & Spine, are very much involved with raising awareness along with much needed funds for The Wounded Warrior Project. What a lot of you may not know is that Corporal Ryne Snooks himself is a Wounded Warrior as he was injured in Afghanistan in May of 2011 on his first tour and returned to Afghanistan to do his second tour in April of 2012.
BARTCON Racing’s Aran Barton presenting a check for $10,000 to Nancy Beetstra of The Wounded Warrior Project . Photo courtesy BARTCON Racing.
I know that I am speaking for the entire BARTCON Racing team when I say, ‘Thank You, Ryne, for your service to our great country, and it is an even greater honor to welcome you to BARTCON Racing.’
Wishing all our race family, friends, and fans a Happy New Year and hoping that 2021 is better for all of us,
Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.
Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW. Or call (909) 654-4779 to subscribe, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday.
Log in HERE to read the January 2021 issue of Roadracing World & Motorcycle Technology with your online subscription.
In This Issue:
FEATURES
Inside Info: 2021 Ducati Monster, Honda Rebel 1100, and more…
Isle of Man TT legend John McGuinness has been awarded an MBE (Member of the Order of the British Empire) by the Queen of England via the New Year’s Honors List 2021.
The list highlights people of the United Kingdom who have made achievements in different sectors, like science, health, education, art, and sport.
John Warren McGuinness, age 48, was recognized for his “services to Motorcycle Racing,” according to the list.
McGuinness has 23 race wins and a total of 46 podium finishes at the Isle of Man TT. His last podium finish at the Isle of Man TT was a runner-up finish in the SES TT Zero in 2019, and his last victory at the Isle of Man TT came in the SES TT Zero race in 2015.
He also won the 250cc Grand Prix British Championship in 1999, won an AMA Pro 250cc Grand Prix at Daytona in 1999, won six races at the North West 200, won the Macau Grand Prix in 2001, and competed in the FIM Supersport World Championship, FIM Endurance World Championship, and the 250cc and 500cc Grand Prix World Championships.
“Well I’m speechless for once!” McGuinness posted on his Twitter feed. “Unbelievable response from all you guys, amazing! Been reading all the messages it means so much, wish I could reply to you all. Huge thanks to everybody that has made it happen. 30 yrs of racing, now the icing on the cake an MBE”
Another racer honored on the Queen’s list was Lewis Hamilton, who received an MBE after winning his first Formula One World Championship in 2008 and has now received a Knighthood after winning his seventh Formula One World Championship in 2020.
AHRMA (American Historic Racing Motorcycle Association) is pleased to announce the second AHRMA Vintage Cup which will take place in the 2021 racing season. The 2021 AHRMA Vintage Cup, sponsored by NYC Norton (nycnorton.com) and Roadracing World (roadracingworld.com) features the 500 Premier class as originally planned for the 2020 racing season.
2021 Vintage Cup Entry Rebate!
Starting this year, the registration fee for the Vintage Cup will be rebated $25 per entry, or $50 for the weekend. To enable the rebate, check the discount box immediately beneath the race number selection after selecting the Vintage Cup class and it will be applied upon checkout.
Eligible Machines
For eligible machines and rules specific to the 500 Premier class, please see below. You may also refer to the AHRMA Handbook, which can be found online at www.ahrma.org/ahrma-handbook.
500 PREMIER: Any fully GP-kitted 500cc OHV/OHC or 750cc sidevalve four-strokes built before December 31, 1968, and like design. Among the eligible machines are:
Benelli, “works” fours
Bianchi 500 “works” twin
BMW Rennsport
BSA 500cc twin or single “works” or replica, up to B50
Dick Mann frame with G50 or other period engine
Ducati 450 single
Ducati 500cc bevel-gear V-twin “works” racer and accurate replicas
ESO 500 single
Gilera
Harley-Davidson KR roadracer
Honda CR450 roadracer
Honda-Drixton 450
Honda RC181 4-cylinder (no replicas)
Jawa “works” twin
Jawa 500 single
Linto
Matchless G50
McIntyre Special and replica, G50 powered
Moto Guzzi single, twin and V8
MV triple
MV four, early wide-angle head (pre-1973 era)
Norton Dominator Daytona 500 or replica
Norton Manx
Paton twin (8-valve Paton twin not legal for 500 Premier)
Rickman GP roadracing frame, powered by G50 or other period engine
Royal Enfield, including India-built models.
Seeley frame with G50 or other period engine
Triton
Triumph 500cc twin “works” or replica; Weslake four-valve heads permitted
Velocette Thruxton and Venom Clubman
Vincent Grey Flash or replica
Weslake (Nourish) pre-unit engines
Note: Honda CB/CL/SL 350 twins are not eligible for this class. See 350 Sportsman or Formula 250.
10.2.6 REQUIREMENTS AND MODIFICATIONS FOR GRAND PRIX CLASSES
All GP-class motorcycles must be fully GP-kitted, with no lights, no starting mechanisms, no street equipment or associated brackets (factory-welded brackets may be retained if desired), low narrow handlebars (maximum width 32 inches). Fairings are encouraged.
Frame may be changed to racing type, though must be period type and style. (See rule 9.7.3)
Front forks may be changed, though must be period type and style. “Ceriani-type” may be no larger in diameter than 35mm, unless supplied as OEM on that motorcycle.
Period retrofit gearboxes are permitted (e.g., Quaife, Schafleitner). Maximum six speeds unless otherwise stated.
Front disc brakes are prohibited. Rear disc brakes are permitted, but must be period equipment.
Magnesium engine cases are allowed in 500 Premier.
The number of valves in the cylinder head may not be increased or decreased from stock.
No more than one carburetor per cylinder. Gardner carburetors are permitted.
All modifications must be consistent with the spirit of the class and period.
Appearance and workmanship of a reasonable standard shall be enforced.
Two-strokes must use silencers.
Maximum rim width is WM3 (2.15 inches) in all GP classes
Note: See requirements of all roadracing motorcycles in Section 9. Get those bikes out and ready to race in 2021!
Suzuki Racing Company employees met outside the Hamamatsu headquarters in Japan earlier this week for a group photo session to celebrate their multi-World Championship-winning year.
In 2020, Suzuki Motor Corporation celebrated its 100-year anniversary and 60 years of racing by winning the MotoGP World Championship, the MotoGP Teams Championship and its 16th Endurance World Championship with the Suzuki Endurance Racing Team.
Team Suzuki fans worldwide will have followed the championship-winning battles of Team Suzuki Ecstar in MotoGP and the SERT in EWC and will have seen many of the race team members hard at work in their various jobs at trackside.
Behind the scenes in Japan, the Suzuki Racing Company employees are the unseen support and development team behind the World Championship-winning Suzuki GSX-RR where the technology developed is used to develop future production motorcycles.
Following the covid-19 positivity discovered shortly before the Christmas break, Fausto Gresini – after an initial isolation period at home – was hospitalized on 27th December at the Santa Maria della Scaletta hospital in Imola.
The Gresini Racing Team Principal was transported today to the Maggiore Carlo Alberto Pizzardi hospital in Bologna, in a more specialised ward for Covid-19 care.
Fausto’s conditions are constantly monitored. Further updates will follow.
Leoncino Trail Joins Benelli Motorcycles USA Lineup
Benelli introduces Trail version of the Leoncino classic Scrambler
Norwalk, CA – Just weeks after welcoming the all-new Leoncino to North America, Benelli Motorcycles USA is proud to announce the next model in the Leoncino legacy to hit U.S. shores, the Benelli Leoncino Trail.
A 2021 Benelli Leoncino Trail. Photo courtesy Benelli Motorcycles USA.
Like the classic Benelli Leoncino motorcycle, inspired by the café racers of the 60’s and 70’s, the Leoncino Trail takes the do-it-all persona of Benelli’s “little lion” and expands its capability even further, with spoked wheels, aggressive tire tread, longer suspension travel and a style all its own. Like the adventurous spirit of the Benelli brothers a century ago, and the proud sporting heritage of Benelli Motorcycles throughout the golden age of motorcycling, the Leoncino Trail will forge ahead even when the road gets rough.
A 2021 Benelli Leoncino Trail. Photo courtesy Benelli Motorcycles USA.
Powered by a 500cc parallel twin engine with dual overhead cams and fuel injection, the Leoncino Trail puts out a steady flow of smooth power. Just like its Leoncino sibling, the Trail shares a generous midrange and sixspeed transmission that make excellent use of its 48 horsepower (at 8500), offering an incredibly fun and easyto-ride motorcycle.
The Leoncino Trail stands apart with its aluminum alloy spoked wheels and aggressive Metzeler Tourance tires. Wheel size increases to 19-inches up front, fitted with 110/80-19 tread, and a 17-inch wheel in the rear with a 150/70-17 tire for optimum stability in mixed road conditions. Suspension also increases from the standard Leoncino, with an adjustable USD fork up front utilizing 50mm fork tubes, and a laterally mounted single shock in the rear. Greater adjustability and increased travel give the Leoncino Trail the versatility to take on rougher roads, so the fun doesn’t stop when the pavement does.
A 2021 Benelli Leoncino Trail. Photo courtesy Benelli Motorcycles USA.
A taller handlebar gives the Leoncino Trail a roomier cockpit and more upright riding position while the stitched gripper seat helps keep the rider in place. Coupled with the added ground clearance and longer-travel suspension, the Leoncino Trail carries a slight size advantage for greater leverage over the bike and improved sporting capabilities. Ultra-strong brakes help keep you in control, with four-piston calipers and dual 320mm wave-style rotors on the front, and a 260mm single disc in the rear.
Minimalist bodywork and a classic low-slung two-into-one exhaust embrace the authentic scrambler design concept. The Leoncino Trail follows the classic style cues with a contemporary twist all its own, and the right touch of technology to bring it into the modern era. Digital instrumentation, clean and compact control switchblocks and all LED lighting round out this versatile sporting package that could only come from Benelli.
List price for the 2021 Benelli Leoncino Trail, currently available at Benelli Motorcycle dealers, is $6,499. Find more information, including specifications, at http://benelli.ssrmotorsports.com/.
ABOUT BENELLI MOTORCYCLES
In 1911, the six Benelli brothers began building motorcycle parts, including their first engine in 1919. In 1921, the first Benelli motorcycle was born. Nearly a century later, the Italian legacy continues, with a rich heritage of sport and touring Benelli motorcycles. In December 2005, Benelli became part of the Qianjiang (Q.J.) Group manufacturer, winner of the prestigious Best Motorcycle Importer award. Q.J. is located in Wenling, China, employing 14,000 people and producing over 1.2 million vehicles and 2 million engines per year, distributed worldwide. In 2015, SSR penned an agreement with Q.J. to control North American distribution, and in 2016 began to import Benelli Motorcycles in the U.S.
More at http://benelli.ssrmotorsports.com/.
ABOUT SSR MOTORSPORTS
SSR Motorsports is an American motorcycle and powersports company based in Norwalk,
California, started in 2002 by the Li family. SSR Motorsports offers a diverse line of powersports products from pit bikes to full-size dirt bikes, street bikes, scooters, e-bicycles and UTVs, with a focus on providing quality products at affordable prices. SSR products are sourced in China, tested and developed in the U.S., and distributed through a vast American dealer network, backed by product warranties, excellent customer service and parts support. In 2016, SSR Motorsports became the exclusive U.S. distributor of Benelli Motorcycles and continues to expand the line of the Qianjiang-owned Italian brand of motorcycles. More at http://www.ssrmotorsports.com/.
As we look out from beneath the dark cloud that was 2020, the anticipation of a return to superbike racing in Canada is a beacon of light in a year of perpetual upheaval. In the spirit of moving onward and upward, Trevor Daley is pleased to confirm his continued partnership with Suzuki Canada for the 2021 race season.
“I’m very excited to race the GSX-R1000R again in 2021, and to continue working with the amazing group of people at Suzuki Canada,” says Trevor. “Even though racing was restricted in 2020, I look forward to applying what I learned on- and off-track this year to my race program, and be in the fight for Canadian Superbike Championship (CSBK) race wins in 2021.”
Trevor Daley. Photo by Brian J. Nelson, courtesy Trevor Daley.
Trevor returned to Suzuki equipment for the 2019 season and his results immediately moved him to the front of the grid. Building off three consecutive 2019 CSBK podiums, a February test in Florida and continued improvements made to his Suzuki over the off-season, Trevor was looking forward to the 2020 races despite the truncated schedule. With a second and a third in the two races his schedule allowed him to compete in, his pace was stronger than ever.
With the 2020 CSBK season coming to a premature end in early August, Trevor was fortunate to have had the opportunity to attend several MotoAmerica events with American Suzuki flagship operation M4 ECSTAR Suzuki. Trevor also had the privilege of racing his Suzuki Canada GSX-R at the Indianapolis MotoAmerica round and looks forward to implementing the many technical and riding skills gleaned to his 2021 Canadian campaign.
Trevor encourages enthusiasts to follow along with and participate in his and Suzuki Canada’s social media, which will include new machine livery that echoes the MotoGP championship-winning Suzuki GSX-RR.
Series information, event scheduling—as well as multimedia and past results—can be found at the Canadian Superbike Championship website at CSBK.ca.
Five races feature on the 2021 FIM Endurance World Championship schedule. The season starts at Le Mans in France with the 24 Heures Motos in mid-April.
Following the last race of the 2019-2020 season in Portugal last September, the 2021 season of the FIM Endurance World Championship will open in France on 17 and 18 April with the 24Heures Motos at the Bugatti Circuit in Le Mans.
Three major races return to the calendar in 2021 after being postponed in 2020.
The 8 Hours of Oschersleben is scheduled for Sunday 23 May in Germany.
The FIM EWC will once again stage the Suzuka 8 Hours, to be held in Japan on Sunday 18 July just before the start of the Tokyo Olympics.
The Bol d’Or will take place on the Paul Ricard Circuit at Le Castellet in France on 18 and 19 September.
As in 2020, the 12 Hours of Estoril wraps up the 2021 season in Portugal. The race will be held on Saturday 16 October at the circuit near Lisbon.
François Ribeiro, Head of Eurosport Events
“We have not put the pandemic behind us as yet, but ensuring the sport’s continuity remains a priority for 2021. Every single race will take place as scheduled whatever the conditions of spectator attendance at the circuits, and the 2021 calendar will help teams keep their costs in check. All of the championship’s big classic races are back to offer fans an exciting show ahead of the first-ever 24H de Spa Motos in June 2022.”
Jorge Viegas, President of the FIM
“Once again we will do everything possible to ensure that the FIM Endurance World Championship has a worthy calendar, one that can offer all the protagonists a balanced and exciting competition. Even if the pandemic is not over, the FIM and Eurosport Events are continuing to work tirelessly to deliver an unforgettable show thanks to the ongoing support of the organisers and National Federations in each country.”
2021 FIM EWC provisional calendar
17-18 April 2021 – 24 Heures Motos / Le Mans – France
23 May 2021 – 8 Hours of Oschersleben – Germany
18 July 2021 – Suzuka 8 Hours – Japan
18-19 September 2021 – Bol d’Or (24h) / Le Castellet – France
Fausto Gresini (center) with his 2020 MotoE riders Matteo Ferrari (left) and Alessandro Zaccone (right), before the start of the COVID-19 pandemic. Photo courtesy of Gresini Racing.
UPDATE ON FAUSTO GRESINI’S CONDITIONS
The conditions of Fausto Gresini – who was transported to the Carlo Alberto Pizzardi hospital in Bologna on December 30th – are slightly improving.
After his arrival at the hospital (Intensive Care Department of Prof. Cilloni) with very low blood oxygen saturation levels, the Gresini Racing Team Principal was induced into a pharmacological coma and received an endotracheal intubation to help organs oxygenation.
During the last few hours, in light of stable and improving general conditions, the doctors decided to begin a slow awakening process to allow independent lung ventilation.
It gives me the greatest honor to welcome our newest and final team member at BARTCON Racing for the 2021 MotoAmerica Season – Ryne Snooks.
Next year, Ryne will be racing his Yamaha FZ-07 in the Twins Cup along with his teammate Cooper McDonald.
For those of you who have not yet had the pleasure of meeting Ryne, let me tell you a little bit about him and how he came to end up racing for BARTCON Racing Team.
Ryne Snooks. Photo by Brian J. Nelson, courtesy BARTCON Racing.
Ryne has been competing in MotoAmerica for a couple of years now and for the most part has been doing it alone with the help of a few good friends. Ryne along with his family and friends always managed to make it over to the BARTCON paddock to wind down after race day, and needless to say, we all became great friends very quickly.
Ryne was always willing to help anyone around him on race weekends that needed help, so when he came to me about the possibility of riding out of the BARTCON Racing paddock set-up it was an instant YES!
As most of you May know, BARTCON Racing along with one of our primary sponsors, Coastal Neurosurgery & Spine, are very much involved with raising awareness along with much needed funds for The Wounded Warrior Project. What a lot of you may not know is that Corporal Ryne Snooks himself is a Wounded Warrior as he was injured in Afghanistan in May of 2011 on his first tour and returned to Afghanistan to do his second tour in April of 2012.
BARTCON Racing’s Aran Barton presenting a check for $10,000 to Nancy Beetstra of The Wounded Warrior Project . Photo courtesy BARTCON Racing.
I know that I am speaking for the entire BARTCON Racing team when I say, ‘Thank You, Ryne, for your service to our great country, and it is an even greater honor to welcome you to BARTCON Racing.’
Wishing all our race family, friends, and fans a Happy New Year and hoping that 2021 is better for all of us,
Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.
Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW. Or call (909) 654-4779 to subscribe, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday.
Log in HERE to read the January 2021 issue of Roadracing World & Motorcycle Technology with your online subscription.
In This Issue:
FEATURES
Inside Info: 2021 Ducati Monster, Honda Rebel 1100, and more…
John McGuinness (1), as seen during the 2014 Isle of Man TT. Photo by Stephen Davison/Pacemaker Press International.
Isle of Man TT legend John McGuinness has been awarded an MBE (Member of the Order of the British Empire) by the Queen of England via the New Year’s Honors List 2021.
The list highlights people of the United Kingdom who have made achievements in different sectors, like science, health, education, art, and sport.
John Warren McGuinness, age 48, was recognized for his “services to Motorcycle Racing,” according to the list.
McGuinness has 23 race wins and a total of 46 podium finishes at the Isle of Man TT. His last podium finish at the Isle of Man TT was a runner-up finish in the SES TT Zero in 2019, and his last victory at the Isle of Man TT came in the SES TT Zero race in 2015.
He also won the 250cc Grand Prix British Championship in 1999, won an AMA Pro 250cc Grand Prix at Daytona in 1999, won six races at the North West 200, won the Macau Grand Prix in 2001, and competed in the FIM Supersport World Championship, FIM Endurance World Championship, and the 250cc and 500cc Grand Prix World Championships.
“Well I’m speechless for once!” McGuinness posted on his Twitter feed. “Unbelievable response from all you guys, amazing! Been reading all the messages it means so much, wish I could reply to you all. Huge thanks to everybody that has made it happen. 30 yrs of racing, now the icing on the cake an MBE”
Another racer honored on the Queen’s list was Lewis Hamilton, who received an MBE after winning his first Formula One World Championship in 2008 and has now received a Knighthood after winning his seventh Formula One World Championship in 2020.
Team Obsolete's Dave Roper (7) leads Alex McLean (122), Walt Fulton (177X), and Jack Parker (18) early in an AHRMA Vintage Cup (350 GP) race at Barber Motorsports Park in 2019. Photo by etechphoto.com, courtesy of AHRMA.
AHRMA (American Historic Racing Motorcycle Association) is pleased to announce the second AHRMA Vintage Cup which will take place in the 2021 racing season. The 2021 AHRMA Vintage Cup, sponsored by NYC Norton (nycnorton.com) and Roadracing World (roadracingworld.com) features the 500 Premier class as originally planned for the 2020 racing season.
2021 Vintage Cup Entry Rebate!
Starting this year, the registration fee for the Vintage Cup will be rebated $25 per entry, or $50 for the weekend. To enable the rebate, check the discount box immediately beneath the race number selection after selecting the Vintage Cup class and it will be applied upon checkout.
Eligible Machines
For eligible machines and rules specific to the 500 Premier class, please see below. You may also refer to the AHRMA Handbook, which can be found online at www.ahrma.org/ahrma-handbook.
500 PREMIER: Any fully GP-kitted 500cc OHV/OHC or 750cc sidevalve four-strokes built before December 31, 1968, and like design. Among the eligible machines are:
Benelli, “works” fours
Bianchi 500 “works” twin
BMW Rennsport
BSA 500cc twin or single “works” or replica, up to B50
Dick Mann frame with G50 or other period engine
Ducati 450 single
Ducati 500cc bevel-gear V-twin “works” racer and accurate replicas
ESO 500 single
Gilera
Harley-Davidson KR roadracer
Honda CR450 roadracer
Honda-Drixton 450
Honda RC181 4-cylinder (no replicas)
Jawa “works” twin
Jawa 500 single
Linto
Matchless G50
McIntyre Special and replica, G50 powered
Moto Guzzi single, twin and V8
MV triple
MV four, early wide-angle head (pre-1973 era)
Norton Dominator Daytona 500 or replica
Norton Manx
Paton twin (8-valve Paton twin not legal for 500 Premier)
Rickman GP roadracing frame, powered by G50 or other period engine
Royal Enfield, including India-built models.
Seeley frame with G50 or other period engine
Triton
Triumph 500cc twin “works” or replica; Weslake four-valve heads permitted
Velocette Thruxton and Venom Clubman
Vincent Grey Flash or replica
Weslake (Nourish) pre-unit engines
Note: Honda CB/CL/SL 350 twins are not eligible for this class. See 350 Sportsman or Formula 250.
10.2.6 REQUIREMENTS AND MODIFICATIONS FOR GRAND PRIX CLASSES
All GP-class motorcycles must be fully GP-kitted, with no lights, no starting mechanisms, no street equipment or associated brackets (factory-welded brackets may be retained if desired), low narrow handlebars (maximum width 32 inches). Fairings are encouraged.
Frame may be changed to racing type, though must be period type and style. (See rule 9.7.3)
Front forks may be changed, though must be period type and style. “Ceriani-type” may be no larger in diameter than 35mm, unless supplied as OEM on that motorcycle.
Period retrofit gearboxes are permitted (e.g., Quaife, Schafleitner). Maximum six speeds unless otherwise stated.
Front disc brakes are prohibited. Rear disc brakes are permitted, but must be period equipment.
Magnesium engine cases are allowed in 500 Premier.
The number of valves in the cylinder head may not be increased or decreased from stock.
No more than one carburetor per cylinder. Gardner carburetors are permitted.
All modifications must be consistent with the spirit of the class and period.
Appearance and workmanship of a reasonable standard shall be enforced.
Two-strokes must use silencers.
Maximum rim width is WM3 (2.15 inches) in all GP classes
Note: See requirements of all roadracing motorcycles in Section 9. Get those bikes out and ready to race in 2021!
Suzuki Racing staff outside a testing support building in Japan. Photo courtesy Team Suzuki Press Office.
Suzuki Racing Company employees met outside the Hamamatsu headquarters in Japan earlier this week for a group photo session to celebrate their multi-World Championship-winning year.
In 2020, Suzuki Motor Corporation celebrated its 100-year anniversary and 60 years of racing by winning the MotoGP World Championship, the MotoGP Teams Championship and its 16th Endurance World Championship with the Suzuki Endurance Racing Team.
Team Suzuki fans worldwide will have followed the championship-winning battles of Team Suzuki Ecstar in MotoGP and the SERT in EWC and will have seen many of the race team members hard at work in their various jobs at trackside.
Behind the scenes in Japan, the Suzuki Racing Company employees are the unseen support and development team behind the World Championship-winning Suzuki GSX-RR where the technology developed is used to develop future production motorcycles.
Team Owner Fausto Gresini (left) with MotoE rider Alessandro Zaccone (right) in December 2019. Photo courtesy of Gresini Racing.
UPDATE ON FAUSTO GRESINI’S CONDITIONS
Following the covid-19 positivity discovered shortly before the Christmas break, Fausto Gresini – after an initial isolation period at home – was hospitalized on 27th December at the Santa Maria della Scaletta hospital in Imola.
The Gresini Racing Team Principal was transported today to the Maggiore Carlo Alberto Pizzardi hospital in Bologna, in a more specialised ward for Covid-19 care.
Fausto’s conditions are constantly monitored. Further updates will follow.
A 2021 Benelli Leoncino Trail. Photo courtesy Benelli Motorcycles USA.
Leoncino Trail Joins Benelli Motorcycles USA Lineup
Benelli introduces Trail version of the Leoncino classic Scrambler
Norwalk, CA – Just weeks after welcoming the all-new Leoncino to North America, Benelli Motorcycles USA is proud to announce the next model in the Leoncino legacy to hit U.S. shores, the Benelli Leoncino Trail.
A 2021 Benelli Leoncino Trail. Photo courtesy Benelli Motorcycles USA.
Like the classic Benelli Leoncino motorcycle, inspired by the café racers of the 60’s and 70’s, the Leoncino Trail takes the do-it-all persona of Benelli’s “little lion” and expands its capability even further, with spoked wheels, aggressive tire tread, longer suspension travel and a style all its own. Like the adventurous spirit of the Benelli brothers a century ago, and the proud sporting heritage of Benelli Motorcycles throughout the golden age of motorcycling, the Leoncino Trail will forge ahead even when the road gets rough.
A 2021 Benelli Leoncino Trail. Photo courtesy Benelli Motorcycles USA.
Powered by a 500cc parallel twin engine with dual overhead cams and fuel injection, the Leoncino Trail puts out a steady flow of smooth power. Just like its Leoncino sibling, the Trail shares a generous midrange and sixspeed transmission that make excellent use of its 48 horsepower (at 8500), offering an incredibly fun and easyto-ride motorcycle.
The Leoncino Trail stands apart with its aluminum alloy spoked wheels and aggressive Metzeler Tourance tires. Wheel size increases to 19-inches up front, fitted with 110/80-19 tread, and a 17-inch wheel in the rear with a 150/70-17 tire for optimum stability in mixed road conditions. Suspension also increases from the standard Leoncino, with an adjustable USD fork up front utilizing 50mm fork tubes, and a laterally mounted single shock in the rear. Greater adjustability and increased travel give the Leoncino Trail the versatility to take on rougher roads, so the fun doesn’t stop when the pavement does.
A 2021 Benelli Leoncino Trail. Photo courtesy Benelli Motorcycles USA.
A taller handlebar gives the Leoncino Trail a roomier cockpit and more upright riding position while the stitched gripper seat helps keep the rider in place. Coupled with the added ground clearance and longer-travel suspension, the Leoncino Trail carries a slight size advantage for greater leverage over the bike and improved sporting capabilities. Ultra-strong brakes help keep you in control, with four-piston calipers and dual 320mm wave-style rotors on the front, and a 260mm single disc in the rear.
Minimalist bodywork and a classic low-slung two-into-one exhaust embrace the authentic scrambler design concept. The Leoncino Trail follows the classic style cues with a contemporary twist all its own, and the right touch of technology to bring it into the modern era. Digital instrumentation, clean and compact control switchblocks and all LED lighting round out this versatile sporting package that could only come from Benelli.
List price for the 2021 Benelli Leoncino Trail, currently available at Benelli Motorcycle dealers, is $6,499. Find more information, including specifications, at http://benelli.ssrmotorsports.com/.
ABOUT BENELLI MOTORCYCLES
In 1911, the six Benelli brothers began building motorcycle parts, including their first engine in 1919. In 1921, the first Benelli motorcycle was born. Nearly a century later, the Italian legacy continues, with a rich heritage of sport and touring Benelli motorcycles. In December 2005, Benelli became part of the Qianjiang (Q.J.) Group manufacturer, winner of the prestigious Best Motorcycle Importer award. Q.J. is located in Wenling, China, employing 14,000 people and producing over 1.2 million vehicles and 2 million engines per year, distributed worldwide. In 2015, SSR penned an agreement with Q.J. to control North American distribution, and in 2016 began to import Benelli Motorcycles in the U.S.
More at http://benelli.ssrmotorsports.com/.
ABOUT SSR MOTORSPORTS
SSR Motorsports is an American motorcycle and powersports company based in Norwalk,
California, started in 2002 by the Li family. SSR Motorsports offers a diverse line of powersports products from pit bikes to full-size dirt bikes, street bikes, scooters, e-bicycles and UTVs, with a focus on providing quality products at affordable prices. SSR products are sourced in China, tested and developed in the U.S., and distributed through a vast American dealer network, backed by product warranties, excellent customer service and parts support. In 2016, SSR Motorsports became the exclusive U.S. distributor of Benelli Motorcycles and continues to expand the line of the Qianjiang-owned Italian brand of motorcycles. More at http://www.ssrmotorsports.com/.
Trevor Daley (9). Photo by Tim McGill Photography, courtesy Trevor Daley.
Suzuki and Daley On Track for 2021
Mississauga, Ontario
As we look out from beneath the dark cloud that was 2020, the anticipation of a return to superbike racing in Canada is a beacon of light in a year of perpetual upheaval. In the spirit of moving onward and upward, Trevor Daley is pleased to confirm his continued partnership with Suzuki Canada for the 2021 race season.
“I’m very excited to race the GSX-R1000R again in 2021, and to continue working with the amazing group of people at Suzuki Canada,” says Trevor. “Even though racing was restricted in 2020, I look forward to applying what I learned on- and off-track this year to my race program, and be in the fight for Canadian Superbike Championship (CSBK) race wins in 2021.”
Trevor Daley. Photo by Brian J. Nelson, courtesy Trevor Daley.
Trevor returned to Suzuki equipment for the 2019 season and his results immediately moved him to the front of the grid. Building off three consecutive 2019 CSBK podiums, a February test in Florida and continued improvements made to his Suzuki over the off-season, Trevor was looking forward to the 2020 races despite the truncated schedule. With a second and a third in the two races his schedule allowed him to compete in, his pace was stronger than ever.
With the 2020 CSBK season coming to a premature end in early August, Trevor was fortunate to have had the opportunity to attend several MotoAmerica events with American Suzuki flagship operation M4 ECSTAR Suzuki. Trevor also had the privilege of racing his Suzuki Canada GSX-R at the Indianapolis MotoAmerica round and looks forward to implementing the many technical and riding skills gleaned to his 2021 Canadian campaign.
Trevor encourages enthusiasts to follow along with and participate in his and Suzuki Canada’s social media, which will include new machine livery that echoes the MotoGP championship-winning Suzuki GSX-RR.
Series information, event scheduling—as well as multimedia and past results—can be found at the Canadian Superbike Championship website at CSBK.ca.
Suzuki Endurance Racing Team (SERT) won the 2019-2020 FIM Endurance World Championship. Photo courtesy Team Suzuki Press Office.
FIVE RACES IN 2021 FIM EWC CALENDAR
Five races feature on the 2021 FIM Endurance World Championship schedule. The season starts at Le Mans in France with the 24 Heures Motos in mid-April.
Following the last race of the 2019-2020 season in Portugal last September, the 2021 season of the FIM Endurance World Championship will open in France on 17 and 18 April with the 24Heures Motos at the Bugatti Circuit in Le Mans.
Three major races return to the calendar in 2021 after being postponed in 2020.
The 8 Hours of Oschersleben is scheduled for Sunday 23 May in Germany.
The FIM EWC will once again stage the Suzuka 8 Hours, to be held in Japan on Sunday 18 July just before the start of the Tokyo Olympics.
The Bol d’Or will take place on the Paul Ricard Circuit at Le Castellet in France on 18 and 19 September.
As in 2020, the 12 Hours of Estoril wraps up the 2021 season in Portugal. The race will be held on Saturday 16 October at the circuit near Lisbon.
François Ribeiro, Head of Eurosport Events
“We have not put the pandemic behind us as yet, but ensuring the sport’s continuity remains a priority for 2021. Every single race will take place as scheduled whatever the conditions of spectator attendance at the circuits, and the 2021 calendar will help teams keep their costs in check. All of the championship’s big classic races are back to offer fans an exciting show ahead of the first-ever 24H de Spa Motos in June 2022.”
Jorge Viegas, President of the FIM
“Once again we will do everything possible to ensure that the FIM Endurance World Championship has a worthy calendar, one that can offer all the protagonists a balanced and exciting competition. Even if the pandemic is not over, the FIM and Eurosport Events are continuing to work tirelessly to deliver an unforgettable show thanks to the ongoing support of the organisers and National Federations in each country.”
2021 FIM EWC provisional calendar
17-18 April 2021 – 24 Heures Motos / Le Mans – France
23 May 2021 – 8 Hours of Oschersleben – Germany
18 July 2021 – Suzuka 8 Hours – Japan
18-19 September 2021 – Bol d’Or (24h) / Le Castellet – France
A “press release” is promotional text issued by a rider, team, company or organization to inform
the public about an event, product, or service from the issuer’s own point of view, and if deemed
to have news value, may be placed on roadracingworld.com as a service to our readers.
A press release is not an article written by Roadracingworld.com staffers. When a post is labeled with the words “press release”, it means that Roadracingworld.com is not responsible for its content and that Roadracingworld.com makes no guarantee that it is accurate. Not all press releases are posted and Roadracingworld.com may reject press releases if the content is too heavy on commercial promotion with little or no news value or if the press release contains obvious errors.
Accessibility
Accessibility modes
Epilepsy Safe Mode
Dampens color and removes blinks
This mode enables people with epilepsy to use the website safely by eliminating the risk of seizures that result from flashing or blinking animations and risky color combinations.
Visually Impaired Mode
Improves website's visuals
This mode adjusts the website for the convenience of users with visual impairments such as Degrading Eyesight, Tunnel Vision, Cataract, Glaucoma, and others.
Cognitive Disability Mode
Helps to focus on specific content
This mode provides different assistive options to help users with cognitive impairments such as Dyslexia, Autism, CVA, and others, to focus on the essential elements of the website more easily.
ADHD Friendly Mode
Reduces distractions and improve focus
This mode helps users with ADHD and Neurodevelopmental disorders to read, browse, and focus on the main website elements more easily while significantly reducing distractions.
Blindness Mode
Allows using the site with your screen-reader
This mode configures the website to be compatible with screen-readers such as JAWS, NVDA, VoiceOver, and TalkBack. A screen-reader is software for blind users that is installed on a computer and smartphone, and websites must be compatible with it.
Online Dictionary
Readable Experience
Content Scaling
Default
Text Magnifier
Readable Font
Dyslexia Friendly
Highlight Titles
Highlight Links
Font Sizing
Default
Line Height
Default
Letter Spacing
Default
Left Aligned
Center Aligned
Right Aligned
Visually Pleasing Experience
Dark Contrast
Light Contrast
Monochrome
High Contrast
High Saturation
Low Saturation
Adjust Text Colors
Adjust Title Colors
Adjust Background Colors
Easy Orientation
Mute Sounds
Hide Images
Hide Emoji
Reading Guide
Stop Animations
Reading Mask
Highlight Hover
Highlight Focus
Big Dark Cursor
Big Light Cursor
Cognitive Reading
Virtual Keyboard
Navigation Keys
Voice Navigation
Accessibility Statement
www.roadracingworld.com
November 19, 2026
Compliance status
We firmly believe that the internet should be available and accessible to anyone, and are committed to providing a website that is accessible to the widest possible audience,
regardless of circumstance and ability.
To fulfill this, we aim to adhere as strictly as possible to the World Wide Web Consortium’s (W3C) Web Content Accessibility Guidelines 2.1 (WCAG 2.1) at the AA level.
These guidelines explain how to make web content accessible to people with a wide array of disabilities. Complying with those guidelines helps us ensure that the website is accessible
to all people: blind people, people with motor impairments, visual impairment, cognitive disabilities, and more.
This website utilizes various technologies that are meant to make it as accessible as possible at all times. We utilize an accessibility interface that allows persons with specific
disabilities to adjust the website’s UI (user interface) and design it to their personal needs.
Additionally, the website utilizes an AI-based application that runs in the background and optimizes its accessibility level constantly. This application remediates the website’s HTML,
adapts Its functionality and behavior for screen-readers used by the blind users, and for keyboard functions used by individuals with motor impairments.
If you’ve found a malfunction or have ideas for improvement, we’ll be happy to hear from you. You can reach out to the website’s operators by using the following email
Screen-reader and keyboard navigation
Our website implements the ARIA attributes (Accessible Rich Internet Applications) technique, alongside various different behavioral changes, to ensure blind users visiting with
screen-readers are able to read, comprehend, and enjoy the website’s functions. As soon as a user with a screen-reader enters your site, they immediately receive
a prompt to enter the Screen-Reader Profile so they can browse and operate your site effectively. Here’s how our website covers some of the most important screen-reader requirements,
alongside console screenshots of code examples:
Screen-reader optimization: we run a background process that learns the website’s components from top to bottom, to ensure ongoing compliance even when updating the website.
In this process, we provide screen-readers with meaningful data using the ARIA set of attributes. For example, we provide accurate form labels;
descriptions for actionable icons (social media icons, search icons, cart icons, etc.); validation guidance for form inputs; element roles such as buttons, menus, modal dialogues (popups),
and others. Additionally, the background process scans all the website’s images and provides an accurate and meaningful image-object-recognition-based description as an ALT (alternate text) tag
for images that are not described. It will also extract texts that are embedded within the image, using an OCR (optical character recognition) technology.
To turn on screen-reader adjustments at any time, users need only to press the Alt+1 keyboard combination. Screen-reader users also get automatic announcements to turn the Screen-reader mode on
as soon as they enter the website.
These adjustments are compatible with all popular screen readers, including JAWS and NVDA.
Keyboard navigation optimization: The background process also adjusts the website’s HTML, and adds various behaviors using JavaScript code to make the website operable by the keyboard. This includes the ability to navigate the website using the Tab and Shift+Tab keys, operate dropdowns with the arrow keys, close them with Esc, trigger buttons and links using the Enter key, navigate between radio and checkbox elements using the arrow keys, and fill them in with the Spacebar or Enter key.Additionally, keyboard users will find quick-navigation and content-skip menus, available at any time by clicking Alt+1, or as the first elements of the site while navigating with the keyboard. The background process also handles triggered popups by moving the keyboard focus towards them as soon as they appear, and not allow the focus drift outside it.
Users can also use shortcuts such as “M” (menus), “H” (headings), “F” (forms), “B” (buttons), and “G” (graphics) to jump to specific elements.
Disability profiles supported in our website
Epilepsy Safe Mode: this profile enables people with epilepsy to use the website safely by eliminating the risk of seizures that result from flashing or blinking animations and risky color combinations.
Visually Impaired Mode: this mode adjusts the website for the convenience of users with visual impairments such as Degrading Eyesight, Tunnel Vision, Cataract, Glaucoma, and others.
Cognitive Disability Mode: this mode provides different assistive options to help users with cognitive impairments such as Dyslexia, Autism, CVA, and others, to focus on the essential elements of the website more easily.
ADHD Friendly Mode: this mode helps users with ADHD and Neurodevelopmental disorders to read, browse, and focus on the main website elements more easily while significantly reducing distractions.
Blindness Mode: this mode configures the website to be compatible with screen-readers such as JAWS, NVDA, VoiceOver, and TalkBack. A screen-reader is software for blind users that is installed on a computer and smartphone, and websites must be compatible with it.
Keyboard Navigation Profile (Motor-Impaired): this profile enables motor-impaired persons to operate the website using the keyboard Tab, Shift+Tab, and the Enter keys. Users can also use shortcuts such as “M” (menus), “H” (headings), “F” (forms), “B” (buttons), and “G” (graphics) to jump to specific elements.
Additional UI, design, and readability adjustments
Font adjustments – users, can increase and decrease its size, change its family (type), adjust the spacing, alignment, line height, and more.
Color adjustments – users can select various color contrast profiles such as light, dark, inverted, and monochrome. Additionally, users can swap color schemes of titles, texts, and backgrounds, with over seven different coloring options.
Animations – person with epilepsy can stop all running animations with the click of a button. Animations controlled by the interface include videos, GIFs, and CSS flashing transitions.
Content highlighting – users can choose to emphasize important elements such as links and titles. They can also choose to highlight focused or hovered elements only.
Audio muting – users with hearing devices may experience headaches or other issues due to automatic audio playing. This option lets users mute the entire website instantly.
Cognitive disorders – we utilize a search engine that is linked to Wikipedia and Wiktionary, allowing people with cognitive disorders to decipher meanings of phrases, initials, slang, and others.
Additional functions – we provide users the option to change cursor color and size, use a printing mode, enable a virtual keyboard, and many other functions.
Browser and assistive technology compatibility
We aim to support the widest array of browsers and assistive technologies as possible, so our users can choose the best fitting tools for them, with as few limitations as possible. Therefore, we have worked very hard to be able to support all major systems that comprise over 95% of the user market share including Google Chrome, Mozilla Firefox, Apple Safari, Opera and Microsoft Edge, JAWS and NVDA (screen readers).
Notes, comments, and feedback
Despite our very best efforts to allow anybody to adjust the website to their needs. There may still be pages or sections that are not fully accessible, are in the process of becoming accessible, or are lacking an adequate technological solution to make them accessible. Still, we are continually improving our accessibility, adding, updating and improving its options and features, and developing and adopting new technologies. All this is meant to reach the optimal level of accessibility, following technological advancements. For any assistance, please reach out to