Home Blog Page 1395

American Flat Track: BMC Racing Sponsors Fisher In SuperTwins

BMC Racing Backs Davis Fisher in 2021 Mission® SuperTwins Class

Oregon dealership has supported local rider for entire professional career.

BEAVERTON, Ore. – Beaverton Motor Cycle Racing will be the title sponsor for No. 67 Davis Fisher in the 2021 Progressive American Flat Track Mission® SuperTwins class.

Bob Lanphere Jr., president of the Lanphere Auto Group, made the announcement.

“This decision shows the commitment BMC Racing continues to have in many areas of motorcycle racing,” said Lanphere Jr. “We are proud to be associated with Davis and to provide title sponsorship as he competes in AFT’s premier class.”

Bob Lanphere’s Beaverton Motorcycles opened in 1964, and BMC Racing has supported Fisher’s racing for 14 years. The Lanphere Auto Group owns a number of car and motorcycle dealerships throughout the Pacific Northwest.

BriggsAuto.com backed Fisher’s AFT SuperTwins program in 2020.

“When I received a phone call from Briggs Auto saying they were going to sit out this year,” said Fisher, “I wasn’t sure if I would be able to put something together in time for the first round of the series, the March 12 Volusia Half-Mile at Volusia Speedway Park.

“I am grateful that BMC Racing has stepped up its support. Bob’s dad owned the shop before Bob Jr. took it over. He has been involved in racing for many years. At one point, he supported 2000 AMA Grand National Champion Joe Kopp, as well as my dad, Rex.”

Fisher, 23, will contest the 17-round Mission SuperTwins championship on Indian Motorcycle FTR750s, the same brand and model of motorcycle that has captured the AFT crown four consecutive seasons.

“I have two FTR750s that I will prep,” said Fisher, “and my dad will fly to the races to crew for me.”

The 5-foot-6, 150-pound Fisher finished the 2020 AFT SuperTwins season eighth overall in the championship points standings, with seven top-10 placings. His best finishes were a pair of fifths at the Sept. 5 Springfield Mile I and at the Sept. 6 Springfield Mile II in Springfield, Ill.

Fisher also will receive support from Dan Wall of Dick Wall 60, Jerry Stinchfield of Roof Systems of Dallas, Jeff Celorie of Celorie Bros. Trucking, Steve Simon of Allied Motors and Arai Helmets.

Yamaha R3 bLU cRU European Cup 2021 Calendar Updated

2021 Yamaha R3 bLU cRU European Cup Calendar Update

Following a calendar update of the MOTUL FIM Superbike World Championship, the Yamaha R3 bLU cRU European Cup will now start at the Circuito Estoril from the 7th to the 8th of May.

The Yamaha R3 bLU cRU European Cup will continue to support six WorldSBK Rounds with the Dutch Round rescheduled to the 23rd to the 24th of July, with two races per event.

The official Yamaha R3 bLU cRU European Cup test, initially scheduled on the 19th of March at the Misano World Circuit “Marco Simoncelli”, will now be a two-day test on the 8th and 9th of April.

Updated 2021 Yamaha R3 bLU cRU European Cup calendar

Official Test: 8-9 April, Italy, Misano

Round 1: 7-8 May, Portugal, Estoril

Round 2: 11-12 June, Italy, Misano

Round 3: 2-3 July, UK, Donington Park

Round 4: 23-24 July, The Netherlands, Assen

Round 5: 3-4 September, France, Magny-Cours

Round 6: 17-18 September, Spain, Barcelona

World Endurance: Canepa Injured In Crash While Testing At Valencia

Successful Surgery for Niccolò Canepa after Valencia Testing Crash

Yamalube YART Yamaha EWC Official rider, Niccolò Canepa, is recovering well after undergoing successful surgery yesterday. Doctors at the Hospital Universitario Dexeus in Barcelona operated to stabilise three fractures to Canepa’s left ankle, sustained in a testing crash at Valencia on Tuesday.

Canepa was in Spain testing with YART Yamaha teammates Marvin Fritz and Karel Hanika when he crashed heavily on entry to Valencia’s Turn 10. The airbag in his leathers deployed and prevented injury to his upper body, but a heavy impact on his left ankle left the former endurance World Champion with three fractures in the joint.

After an initial assessment in Valencia, Canepa was transported to the Hospital Universitario Dexeus in Barcelona, where surgeons stabilised the fractures with two plates, in a two-hour surgical procedure that took place on Wednesday evening.

The post-surgery prognosis is good, with Canepa expected to make a full recovery ahead of the 24 Hours of Le Mans on 17/18 April, the opening round of the 2021 Endurance World Championship season.

 

Niccolò Canepa: Yamalube YART Yamaha EWC Official Team

“We were out in Spain doing a block of testing ahead of the new season. On Tuesday morning in Valencia, I was maybe pushing a little too much on a track that was still a bit dirty, and I had a huge highside on the entry to Turn 10, probably the biggest I’ve ever had. The airbag in my leathers worked perfectly, but I took a big impact on my left ankle and sustained three fractures. After an initial examination in Valencia, I travelled up to the Hospital Universitario Dexeus in Barcelona, where doctors inserted two plates to stabilise the fractures in an operation last night. The fractures were not so easy to plate but the doctors were very happy with the result and are confident that I’ll make a full recovery. Once the pain goes away in the next week or so then I’ll be able to start the rehabilitation process with some physiotherapy. I’m confident I’ll be fully fit for the first race of the 2021 season at Le Mans in April and I can’t wait to be back on the bike.”

WERA Racing In Alabama And Nevada On February 27-28

TALLADEGA AND LAS VEGAS FOR WERA IN FEBRUARY!

WERA Motorcycle Roadracing is going to hold the SE/Mid-Central Region 2021 season-opener over the February 27-28 weekend at Talladega Gran Prix Raceway.  There will be a track day through Sportbike Track Time on Friday, February 26 and WERA racing will be a double-header sprint weekend with a Rider’s School on Saturday and sprint racing for all classes on Saturday and Sunday.

Please being your masks as they will be required when not wearing your helmet.

On February 27-28 WERA Motorcycle Roadracing will host the season-opener for the Lucas Oil WERA West Series at Las Vegas Classic Course.  This event will have a track day presented by Racers Edge on Friday, February 26 and a WERA Rider’s School on Saturday with sprint racing for all classes on Saturday and Sunday.  This event is restricted to riders and their crew of family. No spectators will be allowed.  Please bring your masks as they are required when not in your helmet.

WERA Motorcycle Roadracing was founded in 1973 and remains the foremost place to develop talent in the sport of motorcycle road racing.  The legacy of Pro Riders on a National and World level is legendary.  All events are run by WERA Motorcycle Roadracing with a co-sanction by the AMA and they go coast to coast offering entry level racing with the WERA Sportsman Series as well as a Pro-Am Series which is the Pirelli/WERA National Challenge Series.  WERA also offers Vintage Racing and hosts the Concours de ’Competition and Concours d’ Elegance in July at Barber Motorsports Park. Endurance Racing is also on the menu with our partner N2 and runs a 4-5 events a year with a Big Bike Endurance and an Ultralightweight Endurance.  WERA Motorcycle Roadracing was voted the 2017 AMA Track Organizer of the year.

For more information on WERA Motorcycle Roadracing please check out our web site at wera.com.

 

Kawasaki Ninja 1000SX: Grand Touring To The Grand Canyon

Featured In the February 2021 issue of Roadracing World:  

          “There’s an appeal to a grand touring machine with a perfect blend of comfort and performance, all the while involving instead of isolating the rider. Especially when it delivers a visceral experience that doesn’t extract a toll on the rider’s body. Big but not too big, fast, and sophisticated, the Ninja 1000SX sport-tourer spoils the rider. It’s designed to cover a lot of miles in speed, style and comfort, as well as being capable and competent if there are more than a few twisty sections of pavement thrown in along the way. 

          “To put the mature Ninja through its paces, I rode it for weeks through the streets of Los Angeles, along the highways of much of Southern California, and then, needing a break from plague worries and wanting some fun too, pointed it towards Las Vegas and then the Grand Canyon…” 

—Kawasaki Ninja 1000SX, Grand Touring To The Grand Canyon, by Editor-At-Large Michael Gougis

 

Refinement would describe Kawasaki’s approach to the latest iteration of the Ninja 1000SX. It occupies a particular niche in the company’s sport-touring line-up, surrounded by the sportbike Ninja ZX-10R—which is not a bad bike at all for covering distances—the Concours 14 and the supercharged Ninja H2 SX SE+. The Ninja 1000SX falls toward the supersport end of the spectrum, its weight and overall size closer to a sportbike than a tourer. Editor-At-Large Michael Gougis put the bike through its paces in its natural habitat, while Racing Editor Chris Ulrich then took it to the track at Auto Club Speedway—with saddlebags! All in the latest issue of Roadracing World!

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

PREVIEW the February 2021 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW . Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday. Read the January 2021 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world

 

American Flat Track: Yamaha Posts $472,000 In Contingency

Yamaha Returns as Official Progressive AFT Partner for 2021

DAYTONA BEACH, Fla. (February 17, 2021) – Progressive American Flat Track is proud to confirm that Yamaha Motor Corp. will return as an Official OEM Partner for the upcoming 2021 season.

Yamaha is well positioned to enjoy a powerful Progressive AFT campaign in ‘21 with potential race winners and title contenders up and down the card. Fans can certainly anticipate multiple visits to the podium by members of the “bLU cRU” from all three classes of Progressive AFT.

Yamaha is fully prepared to back up those big expectations in dollar bills, increasing its contingency offering to nearly a half-million dollars this season. With a combined $472,000 available across all three classes, Yamaha-mounted Progressive AFT athletes will be angling to capture a substantial bounty in their quest for checkered flags and championship rings this season.

Additionally, Yamaha will serve as the entitlement sponsor for its home race, the Yamaha Atlanta Super TT at Atlanta Motorsport Speedway, on May 1, 2021.

“We are very pleased to have Yamaha Motor partner again in 2021 with Progressive American Flat Track,” said Michael Lock, CEO of Progressive AFT. “Yamaha’s commitment to the sport, with nearly $500,000 available in contingency awards, and their factory support for competitors in all three Progressive AFT classes, reinforces their passion for flat track racing. Even since the days of Kenny Roberts, Yamaha has been synonymous with competing at the highest level in America’s Original Extreme Sport!”

“We’re excited to be back as an AFT sponsor partner and are very much looking forward to going racing in 2021,” said Steve Nessl, Yamaha Motorsports Marketing Manager. “With championship-caliber riders throwing legs over both the YZ450F and MT-07 again this season, look for Yamaha-mounted racers to be in the mix for race wins at each round in the hopes of taking home the title at year-end.”

Podcast: Greg’s Garage Pod With Jason Pridmore, Episode 114

Greg’s Garage Pod with Co-Host Jason Pridmore – A motorcycle racing Pod about MotoGP, MotoAmerica, and World Superbike, Pro Motocross, American Flat Track, Supercross, and more. In this episode, Co-Hosts Greg White and Jason Pridmore talk:

ARAI Helmets News – MotoAmerica adjusts schedule, a medial update on Marc Marquez, a crash.net article about Yamaha’s MotoGP M1 2021 adjustments, Jerez MotoGP tester test.

Supercross – Results and a chat about Orlando 1.

SX Fantasy – Greg forgets to get his picks in! JP slides.  Join us! Link here: https://pulpmxfantasy.com/leagues/gregsgaragepodcast

American Flat Track – A chat with Multi-Time Champ Jared Mees. Mees talks about his 2020, what coming up in 2021, and the state of AFT.

Next Week Tease –  Supercross from Orlando 2, Supercross Fantasy, a mystery guest, and the latest racing news.

Race Calendar – Monster Energy AMA Supercross, WORCS Peoria, GNCC season opener, Best in the Desert.

 

Counterfeit Case Covers Compromise Safety

By Michael Gougis

The saying goes that imitation is the sincerest form of flattery. But not everyone appreciates that form of flattery.

GBRacing, which operates from a small manufacturing plant north of London, is renowned for its innovative case covers. Teams competing in series and races ranging from MotoAmerica Superbike, to the Superbike World Championship to the Endurance World Championship, from Moto2 to MotoGP, and from British Superbike to the roads of the Isle of Man, use the FIM-certified covers. GBRacing covers are also sold as genuine accessories by Yamaha, and are OEM fitment on the high-end, carbon-fiber-framed BMW HP4 RACE track bike.

But GBRacing says other companies have copied its designs, and in some cases are creating covers that look identical but are functionally inferior.

 

A GBRacing clutch and water pump cover for a Yamaha YZF-R3. Photo courtesy GBRacing.
A GBRacing clutch and water pump cover for a Yamaha YZF-R3. Photo courtesy GBRacing.

 

“I have heard from a few track day groups and some of the regional organizations that they have seen the copycat product fail, not realizing there are counterfeits,” says Skip Dowling of Orient Express Racing, which distributes GBRacing products in the U.S. “We think this diminishes the GB brand among consumers that don’t know the difference. It also leads consumers to think GB Racing supplies its product under various other brand names.”

 

An imitation Yamaha YZF-R3 clutch and water pump cover. The company name has been removed digitally.
An imitation Yamaha YZF-R3 clutch and water pump cover. The company name has been removed digitally.

 

Controversies in the motorcycle road racing industry over product designs, patents, copyrights and other intellectual properties are not new. They are particularly acute when the product or device in question is relatively simple to manufacture. But GBRacing’s concern goes further, and reflects some of the challenges associated with the ongoing evolution of international manufacturing, distribution and sales.

The first—and most traditionally challenging—area of controversy lies in products that are not identical to an existing product but are similar. Specifically, GBRacing claims that the counterfeit covers sold by various companies have “nearly all of the exact design elements” of the GBRacing covers, Dowling says.

GBRacing covers are made from a variety of nylon formulas reinforced with long fiberglass, the manufacturer says. The long fiberglass strands are critical to making the product flex and absorb the punishment that engine case covers are subjected to as a motorcycle crashes its way down the track or road.

 

Six-time and defending FIM Superbike World Champion Jonathan Rea holding a GBRacing case guard. Photo courtesy GBRacing.
Six-time and defending FIM Superbike World Champion Jonathan Rea holding a GBRacing case guard. Photo courtesy GBRacing.

 

And that is at the crux of the second area of concern for GBRacing—the materials used on some case covers that have started hitting the market. According to an engineering report produced for GBRacing by Eurostar Engineering Plastics in France, covers that looked identical to those produced by GBRacing started appearing in Spain in 2016 and are now available worldwide. They are produced in the Guangdong Province of China, known for its manufacturing capabilities, and particularly its ability to mass produce plastic components.

Beyond the intellectual property issue lies the issue of materials. GBRacing contracted for an engineering analysis of one of the Chinese products and the GBRacing part for the same application—in this instance, case covers for a Kawasaki ZX-10R.

The analysis found that the Chinese product was made from one of two types of the most common nylon formulas in wide manufacturing use, a formula called Nylon 6. This product is lustrous, a bit easier to manufacture, easier to color, a bit less expensive and can have a nicer appearance than its counterpart, Nylon 66, Mark Elkovitch, Senior Technology Manager at PolyOne Corporation, said in a seminar on a comparison of the two materials. PolyOne is an Ohio-based global provider of polymer products and services, with sales over $3.3 billion according to corporate financial documents.

 

Michael van der Mark (60) during testing on his Pata Yamaha YZF-R1 World Superbike, which is fitted with a GBRacing engine case guard sporting a scuff that was probably made via contact with a curbing. Photo courtesy Dorna WorldSBK Press Office.
Michael van der Mark (60) during testing on his Pata Yamaha YZF-R1 World Superbike, which is fitted with a GBRacing engine case guard sporting a scuff that was probably made via contact with a curbing. Photo courtesy Dorna WorldSBK Press Office.

 

However, Nylon 66, which is the material used in the GBRacing covers, has distinct advantages over the less-expensive Nylon 6 material, Elkovitch says. While Nylon 6 is impact-resistant, Nylon 66 is significantly more so. And Nylon 6 melts at about 220 degrees Centigrade (about 428 degrees Fahrenheit), while Nylon 66 will not melt until it reaches 262 degrees Centigrade (about 503 degrees Fahrenheit).

“When you’re looking for a material that will stand the test of time for products subjected to high temperatures and hydrocarbon exposure, look no further than Nylon 66,” Elkovitch said.

And perhaps most significantly, the Chinese-made covers are 35% short—or standard-length—fiberglass, a typical formulation for that product. That means they offer less impact resistance and less stiffness than the long fiberglass reinforcement of the GBRacing covers, the engineering report concluded.

 

Jonathan Rea (seated on bike) won the 2020 FIM Superbike World Championship with GBRacing engine case guards on his factory Kawasaki ZX-10RR. Photo courtesy Kawasaki.
Jonathan Rea (seated on bike) won the 2020 FIM Superbike World Championship with GBRacing engine case guards on his factory Kawasaki ZX-10RR. Photo courtesy Kawasaki.

 

Dowling says Orient Express and GBRacing are going public to inform the industry of the significant differences between the product they produce and the copies, especially the ones coming out of China. Due to the ongoing evolution of international trade, there may be little else they can do.

In recent years, the cost of small shipments out of China to individual purchasers around the world plummeted. That meant that, for all practical purposes, customers in the U.S. could buy directly from an eBay seller in China and have the product delivered to their doorstep, quickly and inexpensively. A quick Google search turned up a set of Yamaha YZF-R3 case covers, visually nearly identical to the GBRacing product, advertised as being manufactured from long fiberglass reinforced Nylon 66, for $99 with free shipping.

 

Eugene Laverty's 2020 BMW S1000RR factory World Superbike with a GBRacing engine case cover installed. Photo courtesy BMW Motorrad Motorsport.
Eugene Laverty’s 2020 BMW S1000RR factory World Superbike with a GBRacing engine case cover installed. Photo courtesy BMW Motorrad Motorsport.

 

Trying to shut down eBay operators from halfway around the world has traditionally been an exercise in frustration, experts say. It’s not that the Chinese legal system is stacked against those outside of the country suing over a patent infringement—it’s just not cost effective. Patent litigation is expensive at best. And an article in the Berkeley Technology Law Journal found that for non-Chinese companies suing over patent infringements in China, while the success rate is high, the return isn’t. While the win rate for foreign companies suing in China was more than 84%, damages awarded to the winner averaged less than $33,000—a fraction of the cost of simply bringing most patent infringement lawsuits. But following complaints filed by GBRacing, the company says eBay has removed 110 listings involving more than 350 counterfeit GBRacing products through an eBay verification program, Vero.

One of the challenges consumers face when purchasing case savers is that most racing organizations really don’t have standards that the devices have to meet. There’s either a set bolted to the bike or there isn’t—that’s all the typical tech inspector is looking for. So racers and track day riders are on their own to make sure that they get the ones that work well. Doing a little research into materials, looking for FIM homologation, and sticking with brand names that have done their own R&D and buying from reputable suppliers can all help. The payoff is more crash protection for a rider’s motorcycle and improved safety for the rider and their fellow riders out on the racetrack.

 

 

 

More, from a press release issued by GBRacing:

North London-based GBRacing has been fighting against fraudsters passing off cheap imitations for several years with the numbers now rising to unprecedented levels.

eBay has been a happy hunting ground for fraudsters but, to its credit, after GBRacing filed several complaints, the online auction giant has removed no fewer than 110 listings covering over 350 different counterfeit GBRacing products through its Vero programme. The tip of the iceberg, but still a great victory against the unscrupulous companies.

However, while eBay is proving to be an ethical firm, fighting fraud elsewhere is met with varying degrees of success — the discrepancies between the copyright laws in many Far Eastern countries often proving insurmountable for a relatively small UK engineering firm.

Several websites have also been brought to the North London firm’s attention, and while the potential of damage to the hard-earned reputation of the GBRacing brand is clearly a concern, more worrying is the potential threat to rider safety, GBRacing’s highest priority and the reason the company was formed in 2007.

All genuine GBRacing secondary engine covers are designed and manufactured in the UK and have been developed over many years of racing at the highest level in conjunction with some of the world’s best teams. As a result, both the design and the patented material have evolved to provide world class motorcycle protection, with the priority being oil containment to minimise the chances of injury to a following rider crashing on spilled lubricant.

This quality has been recognised by the FIM for more than a decade, culminating in GBRacing recently being the first company to be awarded FIM Quality Product status, a real accolade that provides peace of mind for GBRacing customers.

GBRacing continues to work alongside the FIM and the various high-level teams all over the world to further develop and improve its range of products, from commuter bike to superbike. With the philosophy that every rider deserves the same level of protection and safety, GBRacing hopes that through its much valued racing, technical and press partners, potential buyers can be warned away from buying an inferior product that could cause damage or serious injury.

Click on the Genuine Product Guide for a large, downloadable PDF file.

For more information, or to check out GBRacing’s range of products, log on to www.gbracing.eu.

For press enquiries contact Rob Hoyles @ [email protected]

Wells Fargo Continues Support Of USMCA Coaching

Wells Fargo Powers USMCA Coaches Through Dealership Connectivity 

Temecula, California (February 2021) – The United States Motorcycle Coaching Association (USMCA) is proud to announce today the fourth year of partnership with Wells Fargo Distribution Finance (DF), part of Wells Fargo & Company (NYSE:WFC). Wells Fargo’s continued support ensures the vision of connecting riders with certified coaches will continue to gain momentum.

“Wells Fargo encourages growth in the motorcycling community, and we’re proud to support USMCA as a leader in that endeavor,” said Jeremy Jansen, Motorsports Leader for Wells Fargo Distribution Finance. “We recognize the need for quality coaching and a platform that brings aspiring riders and coaches together, and we look forward to continuing our relationship with USMCA and driving further program visibility through the dealer channel.”

By networking dealerships across the country, and connecting them to certified local area coaches, USMCA and Wells Fargo will lead more interested motorcyclists down a sustainable riding and educational path. This connection at dealerships is vitally important as the first experiences and influences for motorcyclists often come from their first local dealer or shop.

“We are honored to have Wells Fargo on board for the 4th year in a row,” said USMCA President Christy LaCurelle. “They have been a very supportive partner and are very close to the powersports dealer network at the core of the riding experience we promote. We have big plans to expand and engage that network this year. Our partnership with Wells Fargo will introduce our certified coaching network to a broader range of riders and more new riders than ever. That means we can influence riders to become lifetime enthusiasts and customers for the industry.”

About the U.S. Motorcycle Coaching Association (USMCA)

USMCA is an association where riders and parents can connect to motorcycle coaches they can trust through the network, www.MotorcycleCoaching.org. All USMCA Certified Coaches are required to adhere to a code of conduct, pass a background check and hold certifications in abuse prevention, CPR/First Aid, concussion protocol, heat illness & cardiac arrest training. For more information on the USMCA or become a USMCA Certified Coach, visit www.USMCA.org.

“Track Day Circus” Planned July 2-3 At Utah Motorsports Campus

Track Day Circus Coming to UMC Summer 2021

[Grantsville, UT] Three prominent track day providers have teamed up to create a unique event for the summer of 2021. With the goal of creating an experience that delivers more than just track time, Apex Assassins, Legion Moto, and TrackDaz have joined forces to create the Summer Track Day Circus – a two-day event that will be held at Utah Motorsports Campus on July 2nd and 3rd.

Center stage will be the 3+ mile long UMC outercourse. With its famously long and high speed straight and technical sections like the infamous “Attitudes,” this is enough to challenge and entertain any track day junkie.

In an effort to be the “The Greatest Trackday on Earth,” the event promises to have plenty of off-track entertainment and activities. Details are still coming together but the organizers plan to leverage the UMC facilities to deliver entertainment both during the day and in the evening. Rumors include stunt shows, shenanigans, a raffle, a BBQ dinner, more shenanigans, games, and a bearded lady.

“We are aiming to have a carnival atmosphere in the pits. Being able to watch Dustin Coyner from TrackDaz get dropped into cold water wearing a tutu in one of those dunk tanks is worth the price of admission,” said Apex Assassins’ Richard Findlay. “But seriously, we wanted to create an epic experience at a track not many have had the opportunity to ride (an event that would be a bucket list item), so we got the best organizations on board to get it done.”

For more information and to sign up visit https://www.trackdaycircus.com/

American Flat Track: BMC Racing Sponsors Fisher In SuperTwins

Davis Fisher (67). Photo by Scott Hunter, courtesy AFT.
Davis Fisher (67). Photo by Scott Hunter, courtesy AFT.

BMC Racing Backs Davis Fisher in 2021 Mission® SuperTwins Class

Oregon dealership has supported local rider for entire professional career.

BEAVERTON, Ore. – Beaverton Motor Cycle Racing will be the title sponsor for No. 67 Davis Fisher in the 2021 Progressive American Flat Track Mission® SuperTwins class.

Bob Lanphere Jr., president of the Lanphere Auto Group, made the announcement.

“This decision shows the commitment BMC Racing continues to have in many areas of motorcycle racing,” said Lanphere Jr. “We are proud to be associated with Davis and to provide title sponsorship as he competes in AFT’s premier class.”

Bob Lanphere’s Beaverton Motorcycles opened in 1964, and BMC Racing has supported Fisher’s racing for 14 years. The Lanphere Auto Group owns a number of car and motorcycle dealerships throughout the Pacific Northwest.

BriggsAuto.com backed Fisher’s AFT SuperTwins program in 2020.

“When I received a phone call from Briggs Auto saying they were going to sit out this year,” said Fisher, “I wasn’t sure if I would be able to put something together in time for the first round of the series, the March 12 Volusia Half-Mile at Volusia Speedway Park.

“I am grateful that BMC Racing has stepped up its support. Bob’s dad owned the shop before Bob Jr. took it over. He has been involved in racing for many years. At one point, he supported 2000 AMA Grand National Champion Joe Kopp, as well as my dad, Rex.”

Fisher, 23, will contest the 17-round Mission SuperTwins championship on Indian Motorcycle FTR750s, the same brand and model of motorcycle that has captured the AFT crown four consecutive seasons.

“I have two FTR750s that I will prep,” said Fisher, “and my dad will fly to the races to crew for me.”

The 5-foot-6, 150-pound Fisher finished the 2020 AFT SuperTwins season eighth overall in the championship points standings, with seven top-10 placings. His best finishes were a pair of fifths at the Sept. 5 Springfield Mile I and at the Sept. 6 Springfield Mile II in Springfield, Ill.

Fisher also will receive support from Dan Wall of Dick Wall 60, Jerry Stinchfield of Roof Systems of Dallas, Jeff Celorie of Celorie Bros. Trucking, Steve Simon of Allied Motors and Arai Helmets.

Yamaha R3 bLU cRU European Cup 2021 Calendar Updated

Riders at speed on Yamaha YZF-R3 racebikes. Photo courtesy of Yamaha.
Riders at speed on Yamaha YZF-R3 racebikes. Photo courtesy Yamaha Motor Europe.

2021 Yamaha R3 bLU cRU European Cup Calendar Update

Following a calendar update of the MOTUL FIM Superbike World Championship, the Yamaha R3 bLU cRU European Cup will now start at the Circuito Estoril from the 7th to the 8th of May.

The Yamaha R3 bLU cRU European Cup will continue to support six WorldSBK Rounds with the Dutch Round rescheduled to the 23rd to the 24th of July, with two races per event.

The official Yamaha R3 bLU cRU European Cup test, initially scheduled on the 19th of March at the Misano World Circuit “Marco Simoncelli”, will now be a two-day test on the 8th and 9th of April.

Updated 2021 Yamaha R3 bLU cRU European Cup calendar

Official Test: 8-9 April, Italy, Misano

Round 1: 7-8 May, Portugal, Estoril

Round 2: 11-12 June, Italy, Misano

Round 3: 2-3 July, UK, Donington Park

Round 4: 23-24 July, The Netherlands, Assen

Round 5: 3-4 September, France, Magny-Cours

Round 6: 17-18 September, Spain, Barcelona

World Endurance: Canepa Injured In Crash While Testing At Valencia

Niccolo Canepa, after his crash at Valencia. Photo courtesy Yamaha.
Niccolo Canepa, after his crash at Valencia. Photo courtesy Yamaha.

Successful Surgery for Niccolò Canepa after Valencia Testing Crash

Yamalube YART Yamaha EWC Official rider, Niccolò Canepa, is recovering well after undergoing successful surgery yesterday. Doctors at the Hospital Universitario Dexeus in Barcelona operated to stabilise three fractures to Canepa’s left ankle, sustained in a testing crash at Valencia on Tuesday.

Canepa was in Spain testing with YART Yamaha teammates Marvin Fritz and Karel Hanika when he crashed heavily on entry to Valencia’s Turn 10. The airbag in his leathers deployed and prevented injury to his upper body, but a heavy impact on his left ankle left the former endurance World Champion with three fractures in the joint.

After an initial assessment in Valencia, Canepa was transported to the Hospital Universitario Dexeus in Barcelona, where surgeons stabilised the fractures with two plates, in a two-hour surgical procedure that took place on Wednesday evening.

The post-surgery prognosis is good, with Canepa expected to make a full recovery ahead of the 24 Hours of Le Mans on 17/18 April, the opening round of the 2021 Endurance World Championship season.

 

Niccolò Canepa: Yamalube YART Yamaha EWC Official Team

“We were out in Spain doing a block of testing ahead of the new season. On Tuesday morning in Valencia, I was maybe pushing a little too much on a track that was still a bit dirty, and I had a huge highside on the entry to Turn 10, probably the biggest I’ve ever had. The airbag in my leathers worked perfectly, but I took a big impact on my left ankle and sustained three fractures. After an initial examination in Valencia, I travelled up to the Hospital Universitario Dexeus in Barcelona, where doctors inserted two plates to stabilise the fractures in an operation last night. The fractures were not so easy to plate but the doctors were very happy with the result and are confident that I’ll make a full recovery. Once the pain goes away in the next week or so then I’ll be able to start the rehabilitation process with some physiotherapy. I’m confident I’ll be fully fit for the first race of the 2021 season at Le Mans in April and I can’t wait to be back on the bike.”

WERA Racing In Alabama And Nevada On February 27-28

WERA racers in action at the Las Vegas Classic Course. Photo by Michael Gougis.
WERA racer Sahar Zvik (161) in action at the Las Vegas Classic Course. Photo by Michael Gougis.

TALLADEGA AND LAS VEGAS FOR WERA IN FEBRUARY!

WERA Motorcycle Roadracing is going to hold the SE/Mid-Central Region 2021 season-opener over the February 27-28 weekend at Talladega Gran Prix Raceway.  There will be a track day through Sportbike Track Time on Friday, February 26 and WERA racing will be a double-header sprint weekend with a Rider’s School on Saturday and sprint racing for all classes on Saturday and Sunday.

Please being your masks as they will be required when not wearing your helmet.

On February 27-28 WERA Motorcycle Roadracing will host the season-opener for the Lucas Oil WERA West Series at Las Vegas Classic Course.  This event will have a track day presented by Racers Edge on Friday, February 26 and a WERA Rider’s School on Saturday with sprint racing for all classes on Saturday and Sunday.  This event is restricted to riders and their crew of family. No spectators will be allowed.  Please bring your masks as they are required when not in your helmet.

WERA Motorcycle Roadracing was founded in 1973 and remains the foremost place to develop talent in the sport of motorcycle road racing.  The legacy of Pro Riders on a National and World level is legendary.  All events are run by WERA Motorcycle Roadracing with a co-sanction by the AMA and they go coast to coast offering entry level racing with the WERA Sportsman Series as well as a Pro-Am Series which is the Pirelli/WERA National Challenge Series.  WERA also offers Vintage Racing and hosts the Concours de ’Competition and Concours d’ Elegance in July at Barber Motorsports Park. Endurance Racing is also on the menu with our partner N2 and runs a 4-5 events a year with a Big Bike Endurance and an Ultralightweight Endurance.  WERA Motorcycle Roadracing was voted the 2017 AMA Track Organizer of the year.

For more information on WERA Motorcycle Roadracing please check out our web site at wera.com.

 

Kawasaki Ninja 1000SX: Grand Touring To The Grand Canyon

At Auto Club Speedway, Roadracing World's Chris Ulrich found the Ninja 1000SX to be stable under braking at speed but a little soft on suspension and top-end power. It's still capable, with saddlebags. Photo by Caliphotography.com.

Featured In the February 2021 issue of Roadracing World:  

          “There’s an appeal to a grand touring machine with a perfect blend of comfort and performance, all the while involving instead of isolating the rider. Especially when it delivers a visceral experience that doesn’t extract a toll on the rider’s body. Big but not too big, fast, and sophisticated, the Ninja 1000SX sport-tourer spoils the rider. It’s designed to cover a lot of miles in speed, style and comfort, as well as being capable and competent if there are more than a few twisty sections of pavement thrown in along the way. 

          “To put the mature Ninja through its paces, I rode it for weeks through the streets of Los Angeles, along the highways of much of Southern California, and then, needing a break from plague worries and wanting some fun too, pointed it towards Las Vegas and then the Grand Canyon…” 

—Kawasaki Ninja 1000SX, Grand Touring To The Grand Canyon, by Editor-At-Large Michael Gougis

 

Refinement would describe Kawasaki’s approach to the latest iteration of the Ninja 1000SX. It occupies a particular niche in the company’s sport-touring line-up, surrounded by the sportbike Ninja ZX-10R—which is not a bad bike at all for covering distances—the Concours 14 and the supercharged Ninja H2 SX SE+. The Ninja 1000SX falls toward the supersport end of the spectrum, its weight and overall size closer to a sportbike than a tourer. Editor-At-Large Michael Gougis put the bike through its paces in its natural habitat, while Racing Editor Chris Ulrich then took it to the track at Auto Club Speedway—with saddlebags! All in the latest issue of Roadracing World!

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

PREVIEW the February 2021 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW . Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday. Read the January 2021 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world

 

American Flat Track: Yamaha Posts $472,000 In Contingency

JD Beach (95). Photo courtesy Yamaha.
Estenson Racing Yamaha rider JD Beach (95). Photo courtesy Yamaha.

Yamaha Returns as Official Progressive AFT Partner for 2021

DAYTONA BEACH, Fla. (February 17, 2021) – Progressive American Flat Track is proud to confirm that Yamaha Motor Corp. will return as an Official OEM Partner for the upcoming 2021 season.

Yamaha is well positioned to enjoy a powerful Progressive AFT campaign in ‘21 with potential race winners and title contenders up and down the card. Fans can certainly anticipate multiple visits to the podium by members of the “bLU cRU” from all three classes of Progressive AFT.

Yamaha is fully prepared to back up those big expectations in dollar bills, increasing its contingency offering to nearly a half-million dollars this season. With a combined $472,000 available across all three classes, Yamaha-mounted Progressive AFT athletes will be angling to capture a substantial bounty in their quest for checkered flags and championship rings this season.

Additionally, Yamaha will serve as the entitlement sponsor for its home race, the Yamaha Atlanta Super TT at Atlanta Motorsport Speedway, on May 1, 2021.

“We are very pleased to have Yamaha Motor partner again in 2021 with Progressive American Flat Track,” said Michael Lock, CEO of Progressive AFT. “Yamaha’s commitment to the sport, with nearly $500,000 available in contingency awards, and their factory support for competitors in all three Progressive AFT classes, reinforces their passion for flat track racing. Even since the days of Kenny Roberts, Yamaha has been synonymous with competing at the highest level in America’s Original Extreme Sport!”

“We’re excited to be back as an AFT sponsor partner and are very much looking forward to going racing in 2021,” said Steve Nessl, Yamaha Motorsports Marketing Manager. “With championship-caliber riders throwing legs over both the YZ450F and MT-07 again this season, look for Yamaha-mounted racers to be in the mix for race wins at each round in the hopes of taking home the title at year-end.”

Podcast: Greg’s Garage Pod With Jason Pridmore, Episode 114

Image courtesy Greg's Garage Pod.
Image courtesy Greg's Garage Pod.

Greg’s Garage Pod with Co-Host Jason Pridmore – A motorcycle racing Pod about MotoGP, MotoAmerica, and World Superbike, Pro Motocross, American Flat Track, Supercross, and more. In this episode, Co-Hosts Greg White and Jason Pridmore talk:

ARAI Helmets News – MotoAmerica adjusts schedule, a medial update on Marc Marquez, a crash.net article about Yamaha’s MotoGP M1 2021 adjustments, Jerez MotoGP tester test.

Supercross – Results and a chat about Orlando 1.

SX Fantasy – Greg forgets to get his picks in! JP slides.  Join us! Link here: https://pulpmxfantasy.com/leagues/gregsgaragepodcast

American Flat Track – A chat with Multi-Time Champ Jared Mees. Mees talks about his 2020, what coming up in 2021, and the state of AFT.

Next Week Tease –  Supercross from Orlando 2, Supercross Fantasy, a mystery guest, and the latest racing news.

Race Calendar – Monster Energy AMA Supercross, WORCS Peoria, GNCC season opener, Best in the Desert.

 

Counterfeit Case Covers Compromise Safety

A GBRacing engine case cover on Jonathan Rea's factory Kawasaki ZX-10R during pre-season testing in 2020. Photo courtesy Kawasaki.
A GBRacing engine case cover on Jonathan Rea's factory Kawasaki ZX-10RR during pre-season testing in 2020. Photo courtesy Kawasaki.

By Michael Gougis

The saying goes that imitation is the sincerest form of flattery. But not everyone appreciates that form of flattery.

GBRacing, which operates from a small manufacturing plant north of London, is renowned for its innovative case covers. Teams competing in series and races ranging from MotoAmerica Superbike, to the Superbike World Championship to the Endurance World Championship, from Moto2 to MotoGP, and from British Superbike to the roads of the Isle of Man, use the FIM-certified covers. GBRacing covers are also sold as genuine accessories by Yamaha, and are OEM fitment on the high-end, carbon-fiber-framed BMW HP4 RACE track bike.

But GBRacing says other companies have copied its designs, and in some cases are creating covers that look identical but are functionally inferior.

 

A GBRacing clutch and water pump cover for a Yamaha YZF-R3. Photo courtesy GBRacing.
A GBRacing clutch and water pump cover for a Yamaha YZF-R3. Photo courtesy GBRacing.

 

“I have heard from a few track day groups and some of the regional organizations that they have seen the copycat product fail, not realizing there are counterfeits,” says Skip Dowling of Orient Express Racing, which distributes GBRacing products in the U.S. “We think this diminishes the GB brand among consumers that don’t know the difference. It also leads consumers to think GB Racing supplies its product under various other brand names.”

 

An imitation Yamaha YZF-R3 clutch and water pump cover. The company name has been removed digitally.
An imitation Yamaha YZF-R3 clutch and water pump cover. The company name has been removed digitally.

 

Controversies in the motorcycle road racing industry over product designs, patents, copyrights and other intellectual properties are not new. They are particularly acute when the product or device in question is relatively simple to manufacture. But GBRacing’s concern goes further, and reflects some of the challenges associated with the ongoing evolution of international manufacturing, distribution and sales.

The first—and most traditionally challenging—area of controversy lies in products that are not identical to an existing product but are similar. Specifically, GBRacing claims that the counterfeit covers sold by various companies have “nearly all of the exact design elements” of the GBRacing covers, Dowling says.

GBRacing covers are made from a variety of nylon formulas reinforced with long fiberglass, the manufacturer says. The long fiberglass strands are critical to making the product flex and absorb the punishment that engine case covers are subjected to as a motorcycle crashes its way down the track or road.

 

Six-time and defending FIM Superbike World Champion Jonathan Rea holding a GBRacing case guard. Photo courtesy GBRacing.
Six-time and defending FIM Superbike World Champion Jonathan Rea holding a GBRacing case guard. Photo courtesy GBRacing.

 

And that is at the crux of the second area of concern for GBRacing—the materials used on some case covers that have started hitting the market. According to an engineering report produced for GBRacing by Eurostar Engineering Plastics in France, covers that looked identical to those produced by GBRacing started appearing in Spain in 2016 and are now available worldwide. They are produced in the Guangdong Province of China, known for its manufacturing capabilities, and particularly its ability to mass produce plastic components.

Beyond the intellectual property issue lies the issue of materials. GBRacing contracted for an engineering analysis of one of the Chinese products and the GBRacing part for the same application—in this instance, case covers for a Kawasaki ZX-10R.

The analysis found that the Chinese product was made from one of two types of the most common nylon formulas in wide manufacturing use, a formula called Nylon 6. This product is lustrous, a bit easier to manufacture, easier to color, a bit less expensive and can have a nicer appearance than its counterpart, Nylon 66, Mark Elkovitch, Senior Technology Manager at PolyOne Corporation, said in a seminar on a comparison of the two materials. PolyOne is an Ohio-based global provider of polymer products and services, with sales over $3.3 billion according to corporate financial documents.

 

Michael van der Mark (60) during testing on his Pata Yamaha YZF-R1 World Superbike, which is fitted with a GBRacing engine case guard sporting a scuff that was probably made via contact with a curbing. Photo courtesy Dorna WorldSBK Press Office.
Michael van der Mark (60) during testing on his Pata Yamaha YZF-R1 World Superbike, which is fitted with a GBRacing engine case guard sporting a scuff that was probably made via contact with a curbing. Photo courtesy Dorna WorldSBK Press Office.

 

However, Nylon 66, which is the material used in the GBRacing covers, has distinct advantages over the less-expensive Nylon 6 material, Elkovitch says. While Nylon 6 is impact-resistant, Nylon 66 is significantly more so. And Nylon 6 melts at about 220 degrees Centigrade (about 428 degrees Fahrenheit), while Nylon 66 will not melt until it reaches 262 degrees Centigrade (about 503 degrees Fahrenheit).

“When you’re looking for a material that will stand the test of time for products subjected to high temperatures and hydrocarbon exposure, look no further than Nylon 66,” Elkovitch said.

And perhaps most significantly, the Chinese-made covers are 35% short—or standard-length—fiberglass, a typical formulation for that product. That means they offer less impact resistance and less stiffness than the long fiberglass reinforcement of the GBRacing covers, the engineering report concluded.

 

Jonathan Rea (seated on bike) won the 2020 FIM Superbike World Championship with GBRacing engine case guards on his factory Kawasaki ZX-10RR. Photo courtesy Kawasaki.
Jonathan Rea (seated on bike) won the 2020 FIM Superbike World Championship with GBRacing engine case guards on his factory Kawasaki ZX-10RR. Photo courtesy Kawasaki.

 

Dowling says Orient Express and GBRacing are going public to inform the industry of the significant differences between the product they produce and the copies, especially the ones coming out of China. Due to the ongoing evolution of international trade, there may be little else they can do.

In recent years, the cost of small shipments out of China to individual purchasers around the world plummeted. That meant that, for all practical purposes, customers in the U.S. could buy directly from an eBay seller in China and have the product delivered to their doorstep, quickly and inexpensively. A quick Google search turned up a set of Yamaha YZF-R3 case covers, visually nearly identical to the GBRacing product, advertised as being manufactured from long fiberglass reinforced Nylon 66, for $99 with free shipping.

 

Eugene Laverty's 2020 BMW S1000RR factory World Superbike with a GBRacing engine case cover installed. Photo courtesy BMW Motorrad Motorsport.
Eugene Laverty’s 2020 BMW S1000RR factory World Superbike with a GBRacing engine case cover installed. Photo courtesy BMW Motorrad Motorsport.

 

Trying to shut down eBay operators from halfway around the world has traditionally been an exercise in frustration, experts say. It’s not that the Chinese legal system is stacked against those outside of the country suing over a patent infringement—it’s just not cost effective. Patent litigation is expensive at best. And an article in the Berkeley Technology Law Journal found that for non-Chinese companies suing over patent infringements in China, while the success rate is high, the return isn’t. While the win rate for foreign companies suing in China was more than 84%, damages awarded to the winner averaged less than $33,000—a fraction of the cost of simply bringing most patent infringement lawsuits. But following complaints filed by GBRacing, the company says eBay has removed 110 listings involving more than 350 counterfeit GBRacing products through an eBay verification program, Vero.

One of the challenges consumers face when purchasing case savers is that most racing organizations really don’t have standards that the devices have to meet. There’s either a set bolted to the bike or there isn’t—that’s all the typical tech inspector is looking for. So racers and track day riders are on their own to make sure that they get the ones that work well. Doing a little research into materials, looking for FIM homologation, and sticking with brand names that have done their own R&D and buying from reputable suppliers can all help. The payoff is more crash protection for a rider’s motorcycle and improved safety for the rider and their fellow riders out on the racetrack.

 

 

 

More, from a press release issued by GBRacing:

North London-based GBRacing has been fighting against fraudsters passing off cheap imitations for several years with the numbers now rising to unprecedented levels.

eBay has been a happy hunting ground for fraudsters but, to its credit, after GBRacing filed several complaints, the online auction giant has removed no fewer than 110 listings covering over 350 different counterfeit GBRacing products through its Vero programme. The tip of the iceberg, but still a great victory against the unscrupulous companies.

However, while eBay is proving to be an ethical firm, fighting fraud elsewhere is met with varying degrees of success — the discrepancies between the copyright laws in many Far Eastern countries often proving insurmountable for a relatively small UK engineering firm.

Several websites have also been brought to the North London firm’s attention, and while the potential of damage to the hard-earned reputation of the GBRacing brand is clearly a concern, more worrying is the potential threat to rider safety, GBRacing’s highest priority and the reason the company was formed in 2007.

All genuine GBRacing secondary engine covers are designed and manufactured in the UK and have been developed over many years of racing at the highest level in conjunction with some of the world’s best teams. As a result, both the design and the patented material have evolved to provide world class motorcycle protection, with the priority being oil containment to minimise the chances of injury to a following rider crashing on spilled lubricant.

This quality has been recognised by the FIM for more than a decade, culminating in GBRacing recently being the first company to be awarded FIM Quality Product status, a real accolade that provides peace of mind for GBRacing customers.

GBRacing continues to work alongside the FIM and the various high-level teams all over the world to further develop and improve its range of products, from commuter bike to superbike. With the philosophy that every rider deserves the same level of protection and safety, GBRacing hopes that through its much valued racing, technical and press partners, potential buyers can be warned away from buying an inferior product that could cause damage or serious injury.

Click on the Genuine Product Guide for a large, downloadable PDF file.

For more information, or to check out GBRacing’s range of products, log on to www.gbracing.eu.

For press enquiries contact Rob Hoyles @ [email protected]

Wells Fargo Continues Support Of USMCA Coaching

A California Superbike School student (17) and instructor (04) in action at Barber Motorsports Park Photo by etechphoto.com.
A California Superbike School student (17) and USMCA-certified instructor (04) in action at Barber Motorsports Park. Photo by etechphoto.com.

Wells Fargo Powers USMCA Coaches Through Dealership Connectivity 

Temecula, California (February 2021) – The United States Motorcycle Coaching Association (USMCA) is proud to announce today the fourth year of partnership with Wells Fargo Distribution Finance (DF), part of Wells Fargo & Company (NYSE:WFC). Wells Fargo’s continued support ensures the vision of connecting riders with certified coaches will continue to gain momentum.

“Wells Fargo encourages growth in the motorcycling community, and we’re proud to support USMCA as a leader in that endeavor,” said Jeremy Jansen, Motorsports Leader for Wells Fargo Distribution Finance. “We recognize the need for quality coaching and a platform that brings aspiring riders and coaches together, and we look forward to continuing our relationship with USMCA and driving further program visibility through the dealer channel.”

By networking dealerships across the country, and connecting them to certified local area coaches, USMCA and Wells Fargo will lead more interested motorcyclists down a sustainable riding and educational path. This connection at dealerships is vitally important as the first experiences and influences for motorcyclists often come from their first local dealer or shop.

“We are honored to have Wells Fargo on board for the 4th year in a row,” said USMCA President Christy LaCurelle. “They have been a very supportive partner and are very close to the powersports dealer network at the core of the riding experience we promote. We have big plans to expand and engage that network this year. Our partnership with Wells Fargo will introduce our certified coaching network to a broader range of riders and more new riders than ever. That means we can influence riders to become lifetime enthusiasts and customers for the industry.”

About the U.S. Motorcycle Coaching Association (USMCA)

USMCA is an association where riders and parents can connect to motorcycle coaches they can trust through the network, www.MotorcycleCoaching.org. All USMCA Certified Coaches are required to adhere to a code of conduct, pass a background check and hold certifications in abuse prevention, CPR/First Aid, concussion protocol, heat illness & cardiac arrest training. For more information on the USMCA or become a USMCA Certified Coach, visit www.USMCA.org.

“Track Day Circus” Planned July 2-3 At Utah Motorsports Campus

Riders in action during a TrackDaz track day. Photo by CaliPhotography.com, courtesy TrackDaz.
Riders in action during a TrackDaz track day. Photo by CaliPhotography.com, courtesy TrackDaz.

Track Day Circus Coming to UMC Summer 2021

[Grantsville, UT] Three prominent track day providers have teamed up to create a unique event for the summer of 2021. With the goal of creating an experience that delivers more than just track time, Apex Assassins, Legion Moto, and TrackDaz have joined forces to create the Summer Track Day Circus – a two-day event that will be held at Utah Motorsports Campus on July 2nd and 3rd.

Center stage will be the 3+ mile long UMC outercourse. With its famously long and high speed straight and technical sections like the infamous “Attitudes,” this is enough to challenge and entertain any track day junkie.

In an effort to be the “The Greatest Trackday on Earth,” the event promises to have plenty of off-track entertainment and activities. Details are still coming together but the organizers plan to leverage the UMC facilities to deliver entertainment both during the day and in the evening. Rumors include stunt shows, shenanigans, a raffle, a BBQ dinner, more shenanigans, games, and a bearded lady.

“We are aiming to have a carnival atmosphere in the pits. Being able to watch Dustin Coyner from TrackDaz get dropped into cold water wearing a tutu in one of those dunk tanks is worth the price of admission,” said Apex Assassins’ Richard Findlay. “But seriously, we wanted to create an epic experience at a track not many have had the opportunity to ride (an event that would be a bucket list item), so we got the best organizations on board to get it done.”

For more information and to sign up visit https://www.trackdaycircus.com/