Home Blog Page 1789

AHRMA Hosting Benefit For Roadracing World Action Fund

AHRMA Benefit For Roadracing World Action Fund To Help Improve Rider Safety

AHRMA is hosting a benefit for the Roadracing World Action Fund, a 501(c)(3) non-profit charity with a mission of improving rider safety by educating riders as well as track and organization officials about the importance of deploying soft barriers, as well as facilitating the deployment of soft barriers.

Since its founding in 2001, the RWAF has raised money to purchase and deploy (and maintain, repair, and replace) hundreds of sections of soft barriers (made by Airfence and by Alpina) at races and track day events at dozens of racetracks nationwide. The soft barriers are designed to be placed and tied down in front of steel barriers, concrete walls, tire walls, and dirt and rock embankments located in impact zones at racetracks. Soft barriers work when air held in an ambient air chamber is forced through blow-off valves at a controlled rate to absorb energy from an impact and decelerate a rider, helping reduce the potential for serious injuries.


(Above) Inflatable Alpina soft barriers deployed at a MotoAmerica Supersport race at Virginia International Raceway. Photo by Brian J. Nelson.

MotoAmerica racer Kyle Wyman demonstrated how effective soft barriers can be when his Superbike lost its front brakes at 150 mph (due to a set of brake pads falling out) on a racetrack straightaway. Data acquisition systems on his bike and in his leathers showed that Wyman left the track at 140 mph and bailed out in a gravel trap; Wyman himself body-slammed a RWAF Airfence-brand soft barrier section (deployed in front of a tire wall) at 104 mph, decelerated to 0 mph in the thickness of the section (about four feet), and walked away without suffering life-changing injuries!


(Above) Kyle Wyman sitting up and catching his breath after body-slamming an Airfence inflatable soft barrier at 104 mph. Photo by beIN SPORTS, courtesy of MotoAmerica.

Every soft barrier section that AHRMA funds will have an AHRMA logo imprinted on one end, which is a great way to give AHRMA national exposure!

AHRMA members are invited to participate in AHRMA’s fundraiser by making a tax-deductible donation directly to the Roadracing World Action Fund using the methods outlined below. Please make sure to note with your donation that your contribution is in support of AHRMA’s fundraising efforts. In exchange for your donation, you will receive correspondence permitting you to claim your charitable donation as a tax deduction.

Our fundraiser starts immediately, and will continue through October 31, 2019.

How to Donate

To help save lives and prevent injuries at the racetrack, you may make your donation as follows:

•call (909) 654-4779 to donate by credit card (M – F, 9:00 a.m. – 5:00 p.m. Pacific Time);

•donate via Paypal to [email protected]; or

•send your tax deductible donation to:

Roadracing World Action Fund

P.O. Box 1428

Lake Elsinore, CA 92531

Your name will be added to Roadracing World’s growing list of contributors.


(Above) A racer passes by inflatable Airfence soft barriers at Auto Club Speedway. Photo by CaliPhotography.com.

More About Soft Barriers

Soft barriers come in two versions, a inflatable longer version (about 30 feet long) designed to be folded up and transported between tracks, and another, shorter version (about six feet long) which does not fold up and is designed to deploy at a single track. The ambient air chamber in the longer version is supported by inflated ribs and columns, and the barrier is inflated before being deployed and tied down. The ambient air chamber in the shorter version (which does not fold up) is supported by closed-cell foam ribs and columns, which are less likely to be damaged or need repair after being hit by a crashed motorcycle. Both types of soft barriers have been deployed during every AHRMA event weekend at New Jersey Motorsports Park since 2012, with the inflatable sections deployed and maintained by an ASRA/CCS crew.

Other racing organizations RWAF is currently working with (or has worked with) include MotoAmerica, AHRMA, AMA Racing, ASRA/CCS, AFM, CMRA, LRRS, MCRA, SMRI, and WERA. Track day organizations RWAF is currently working with include Fastrack Riders, Midwest, Motovid, N2, PRE, XCEL, and others.

World Endurance: More From The Championship Finale At The Suzuka 8-Hours

At The Suzuka 8 Hours, Pirelli Wins The 2018-19 FIM Endurance World Championship With The Victorious Team SRC Kawasaki France

The Final Round of the Championship Saw SRC Kawasaki France’s ZX-10RR Fitted with the DIABLO™ Superbike Slick Tires in a Larger Size and SCX Compound

SUZUKA, Japan – On the occasion of the famous Suzuka 8 Hours endurance race, whose 42nd edition was held yesterday, Pirelli won the 2018-19 FIM Endurance World Championship equipping, with DIABLO™ Superbike slick tires in larger size and in the new SCX compound, Team SRC Kawasaki France.

Starting from the 14th position on the grid, the Kawasaki ZX-10RR No.11 ridden by Jérémy Guarnoni, David Checa and Erwan Nigon crossed the finish line of the last Championship race in 12th position after making 209 laps and eight pit stops in the eight hours. That was enough to gain the world title thanks to the excellent performances obtained in the other events of the World Championship.

As usual in the FIM Superbike World Championship, Pirelli supported its teams participating in the FIM Endurance World Championship by offering them the latest technological solution developments. In this case, the DIABLO™ Superbike slick tires in the larger sizes 200/65 rear and 125/70 front which, just this year, have joined the Pirelli range. In particular, in the five Championship races, the riders mostly used tires from the larger range, SC1 at the front and SC0 at the rear, but at the Suzuka grand finale the new SCX compound solution also played a key role.

Crucially for Pirelli these larger sized tires in their debut year have earned two important accolades in the series, firstly winning the prestigious 24 Hours of Le Mans and then the FIM Endurance World Championship.

A season to be remembered for both Team SRC Kawasaki France together with Pirelli but certainly not without challenges and difficulties to overcome. In the first round, the Bol d’Or (which took place in September 2018), in qualifying the team obtained the pole position and the circuit lap record but in the race, after 22 hours in command and with four laps advantage, an electrical problem forced the riders in for several stops forcing them to finish the race only in seventh position. The result obtained in the 24 Hours of Le Mans last April was quite different and the win, with a decisive overtaking move less than 15 minutes before the end of the race, was their sixth victory in the last 10 years. At the 8 Hours Slovakia Ring in May, bad luck returned to hit the French team, which, after starting in fifth position, after an hour and a half race was forced to retire due to engine failure. Up to the penultimate race of the Championship, the 8 Hours of Oschersleben, where Team SRC Kawasaki France gained another splendid pole position and a second place in the race. Then finally a return to the head of the Championship and to lift the cup of the World Champions at the Suzuka 8 Hours race yesterday.

Over the five events the Pirelli-shod Kawasaki ZX-10RR No.11 logged some impressive numbers: over 10,000 kilometers ridden, 2,078 laps raced, 73 pit stops, 2 pole positions, 1 victory, 1 second place and the icing on the cake, the world title!

Pirelli therefore celebrates the regained title of FIM Endurance World Champion and for the Suzuka, namely the victory in the Superstock class with the BMW TONE RT SYNCEDGE 4413 team.

The next event is now for the opening round of the 2019-20 FIM World Endurance Championship, which will start on September 20, 2019 on the Paul Ricard Circuit of Le Castellet where the 83rd edition of Bol d’Or will take place.

More, from a press release issued by Kawasaki Motors Europe:

SRC Kawasaki France – EWC Champions 2019

Team SRC Kawasaki France are on top of the World: After starting 14th on the grid for the Suzuka 8Hours, the team managed by Gilles Stafler won the 2019 EWC crown after a huge human investment throughout the season.

On Sunday, July 28 11:30am local time the 42nd edition of the 8 hours of Suzuka began – even in the face of a predicted typhoon. No less than sixty six machines set off from the grid ready for a World Championship final which promised to be thrilling throughout.

A dry track start for this most physical event of the year saw Erwan Nigon achieve an excellent start and hold a promising 9th place. A short-lived performance because after only 18 minutes of racing the safety car was on track between the team’s chief rival for the title and the famous #11 Ninja machine. The second incident for the #11 in the first phase of the race was the unfortunate fall of Nigon at the chicane when he temporarily lost front grip.

At half race the three riders were proving strong and competitive amongst illustrious company . No major issues were reported for David Checa, Erwan Nigon and Jérémy Guarnoni who performed their allotted tasks perfectly. Whilst at the mercy of refueling stops the #11 oscillated between 17th and 14th position.

For Suzuka, the customary retirements and stoppages did not feature as much this year making the SRC Kawasaki France riders’ opportunity catch up to the top ranking very challenging indeed. Endurance can be cruel to some when it delivers unexpected – or unasked for – good fortune to others. Likewise, in a surprising final once again, the French based team captured the 2019 World title due to the engine failure of their main rival….. at 7:55 race time – just 5 minutes from the finish!

The team of Gilles Stafler were then “virtually world champions”, yet with a handful of minutes left the scene was of nervous anguish. David Checa piloting the bike redoubled his efforts focusing on avoiding any last second issues; hard as there was not just overnight rain left on the track surface but oil from a rivals blown engine. The last moments of the race seemed like an eternity for the friendly Calatalan rider. However, it did liltle to disrupt the very experienced pilot of the #11 Ninja ZX-10RR who burst into tears of emotion after the checkered flag had been waved to signify race end.

David Checa: “This finish is indescribable, what a sensation! I tried to contain my tears but sorry, I can not do it. The emotions were too intense, my joy is all the stronger as I went through moments of doubt lately but tonight with my teammates Jeremy and Erwan, we are world champions! I cannot thank enough Kawasaki and Gilles Stafler for this unforgettable season!”

Understandably there is real pride among the team for whom this title could not be won without the considerable investment of Kawasaki Motors France and all the sponsor partners who can never be thanked enough.

The SRC Kawasaki France team are now 2018/2019 Endurance World Champions. And, somewhat appropriately, the #11 finishes at position number 11 just 1 lap from the top 10 after 8 grueling yet ultimately glorious hours.

British Superbike: Hector Barbera To Continue With Quattro Plant Kawasaki At Thruxton

Barberá Set to Go into Battle for Quattro Plant Kawasaki at Thruxton

Former MotoGP rider Héctor Barberá will line-up for Quattro Plant JG Speedfit Kawasaki in round seven of the Bennetts British Superbike Championship this weekend following the departure of Glenn Irwin.

This will be Barberá’s fourth outing for the team after deputising for the injured Ben Currie at Donington Park in May, when he made his BSB debut, and the following round at Brands Hatch in June.

More recently the 32-year-old stood in for Glenn Irwin, who was unable to ride due to illness, at Snetterton claiming an impressive seventh-place finish on his first visit to the Norfolk circuit.

Ben, who is still recovering after breaking bones in both feet and damaging his knee ligaments at Oulton Park in May, will be riding alongside his Spanish team-mate.

In 2018 the Australian took top Supersport honours in the first race at Thruxton and now he’s hoping for a repeat performance on the Superbike.

Sidecar teams Ricky Stevens/Ryan Charlwood and Ben Holland/Lee Watson will also be in action in the Molson Group British Sidecar Championship.

Both outfits fared much better than of late during the last round at Snetterton when Stevens/Charlwood took a brace of third-place finishes and team-mates Holland/Watson secured fifth and sixth.

Héctor said: “After learning more about the bike at Snetterton I am very excited to be asked to ride for the team again at Thruxton. It’s another new circuit, which is always a challenge, but one that I am really looking forward to.

“The BSB fans are incredible and I just want to put on a good show for them and the team. Thank you again to Pete and Kawasaki for this opportunity.”

Ben said: “We keep making progress and I’m getting better and better on the bike but it’s been hard to build up any momentum as I’ve had hardly any time on the bike after the crash at Oulton Park.

“My foot has massively improved since Knockhill but it’s hard to tell if it’s 100 per cent better; before a race weekend I start off feeling great but then it gradually deteriorates.

“Hopefully before the end of year it’ll be back to 110 per cent and we’ll be able to get some decent track time in. I’ve just got to focus on my recovery and keep working hard in the gym to improve my fitness so I can make the best of every situation.”

Pete Extance, team owner, said: “Thruxton marks the halfway point for the 2019 BSB Championship and it’s our home round with many of my Bournemouth Kawasaki customers and friends coming along to support us which is always nice.

“It’s great to have Héctor back on the bike especially as it’s a very fast-flowing circuit which I think will suit him and hopefully he will be pushing closer to the podium.

“For Ben it’s the next stage of his recovery and without a doubt he is in a much better position than two weeks ago at Snetterton and will looking for top ten results.”

Ricky said: “We’re feeling much more confident going into round six as we feel like our luck has finally changed for the better!

“It’s been a very challenging championship this year to say the least as we’ve been plagued with technical issues and involved in several crashes which have all taken their toll on us and the bike.

“However, Snetterton was much more positive as we were in the lead at some points and it felt good to be back in contention. Thruxton is one of our favourite circuits as it’s very fast but it’s also our home round so all our friends and family will be there.”

Holland said: “We’re past the halfway point in the championship so we need to secure some podium points at Thruxton to propel us up the table. After such a difficult start it would be good to finish the season on a high!”

MotoGP: Marc Marquez Says “We Can’t Take Anything For Granted”

Repsol Honda Team back in action at Brno

After a brief respite, the Repsol Honda Team return to action recharged and ready to attack the second half of 2019.

Always among the busiest and highest attended races of the year, the Czech GP is a favourite with fans and riders alike. The 5.4km long circuit welcomes the MotoGP World Championship back to action after their brief summer break, the Repsol Honda Team eager to return to track and continue fighting for victory.

Having delivered a supreme performance at the German GP, Marc Marquez entered the mid-season break with a generous 58-point lead in the MotoGP World Championship. Defending this advantage over his title rivals is the main objective for the reigning World Champion at the Czech GP. The Automotodrom Brno is amongst Marquez’s most consistent circuits – only once finishing off the podium since joining the premier class in 2013 and never finishing outside of the top five.

HRC Test Rider Stefan Bradl will again join Marc Marquez in the Repsol Honda Team garage as Jorge Lorenzo continues his recovery from his fall in Assen. The German rider has had an intense workload since finishing in the top ten at the Sachsenring; going on to take a podium finish at the legendary Suzuka 8 Hours race alongside his usual testing duties. Bradl is aiming for another strong weekend and is looking to build on the what he and the team achieved in Germany.

Jorge Lorenzo continues to work on his recovery in order to return for the British GP.

Marc Marquez

“I am very excited to get back on the bike. Summer break is always nice to relax a little bit, but soon you miss the team and the bike! I am ready to get back to work and Brno is a fun circuit to ride. We finished the first half of the season in a very strong way and now we must keep our focus to continue this. Brno is a circuit where lots of riders are often strong so we can’t take anything for granted. I hope Jorge’s recovery is going well and we will soon have him back in the team.”

Stefan Bradl

“Of course I’m looking forward to Brno and it’s great to be back with the Repsol Honda Team as I really enjoyed working with them at the Sachsenring. Our aim is to carry on from where we left in Germany and keep moving forward with the bike. I’m happy to get this chance again and I want to thank HRC and the Repsol Honda Team. Of course all the best to Jorge in his recovery and that he can come back strong.”

Video: MotoAmerica Superbike Racer Mathew Scholtz Tells How He Gets It Done At WeatherTech Raceway Laguna Seca

In this video, MotoAmerica Superbike racer Mathew Scholtz tells Dave Williams about how he gets his Westby Racing Yamaha YZF-R1 around WeatherTech Raceway Laguna Seca.
 

Get On The Track! 2019 Roadracing World Trackday Directory


Ready To Get On The Track? The 2019 Roadracing World Annual Trackday Directory Special Issue Has All The Info You Need. Available Now! Click here to order.

     When you’re ready to hit the racetrack for some track day
fun, turn to the 2019 Roadracing World Trackday Directory! Everything – and we
mean everything – you need before you start out doing track days can be found
in one place. How to select, acquire and improve a motorcycle for track days.
How to learn to ride more quickly and safely. Loading and unloading a
motorcycle – and what else to load before you leave.

     But the 2019 Roadracing World Trackday Directory has far
more than just information about your motorcycle. Read the information you must
have when selecting the best protective gear, the right tires for you and your
bike, the racing suits that perform best for men and women.

     You’ll also read about coaching, training, and dream
vacations that include track days at Grand Prix racetracks, where and when
every track day in the United States is scheduled to take place, and contact
information for the track day organization nearest you.

Pick up a copy of the 2019 Roadracing World Trackday
Directory
today. It’s the one piece of equipment every track day rider needs. Click here to order.

PREVIEW  2019
Roadracing World Annual Trackday Directory

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

Visit www.roadracingworld.com daily for breaking news and events.

https://www.facebook.com/roadracingworld

https://twitter.com@roadracingworld

https://instagram.com@roadracing_world

Join the Roadracing World Online Community of Racers, Riders,
& Fans. Post photos and results, make connections with sponsors, and more!
Create your Roadracing World Online Profile today!

www.roadracingworld.com/signup

​AFM/MotoAmerica Racer Jayson Uribe Injured In Crash At Thunderhill Raceway Park

Jayson Uribe, a top star in the AFM regional series and a
top-10-finishing privateer in the MotoAmerica Superbike Championship, was
injured in a crash he suffered during round four of the AFM Championship series
July 27 at Thunderhill Raceway Park.

Uribe was riding his Honda CBR1000RR during qualifying for
Formula Pacific, AFM’s premier class, when he lost traction and subsequently suffered
a third-gear highside crash exiting Turn Two.

“I saw on my pit board P2 and +0.3,” Uribe told Roadracingworld.com.
“I thought, ‘I can do that.’ I decided to go for a quicker lap time. I think
what ended up happening was I power slid a little bit coming out of Turn Two
and it slid just enough to get the engine case to slide on the ground. And then
as soon as the case touched the ground it picked up the bike like it had a
third pivot point and spun the bike all the way around and spit me off.”

And as if spitting him off at over 100 mph wasn’t bad
enough, Uribe’s motorcycle wasn’t finished with him.

“I was looking backwards at the track,” said Uribe, “and
pretty much the bike hit me in the face. I never lost consciousness. My head’s
fine. My Arai helmet did a great job.”

Uribe, however, was transported from the racetrack via
medivac helicopter to Enloe Medical Center, in Chico, California, where he underwent
surgery to repair damage to his left arm.

“I have lost two more bones from my elbow,” said Uribe. “One
ground away to nothing and one got ejected out of my body in the crash. And I
tore my triceps [muscle] off of my elbow. So I got my triceps re-attached to my
elbow, and we’re good to go.”

Uribe expected to be released from the hospital Monday, but
he isn’t sure exactly when he will return to racing action.

“I’m trying my best to heal up as quickly as I can,” said
Uribe. “I want to ride in the MotoAmerica round at Sonoma, but right now all of
the [sponsor] contracts I have are for AFM. So my priority is to make sure I do
that and see where it goes from there.”

BMW Boxer Cup: Nate Kern, Christof Hofer Split Wins At Schleizer-Dreieck (Updated)

IDM Championship Series

Schleizer-Dreieck, Germany

July 27-28, 2019

BMW Motorrad Boxer Cup Promoted by Wilbers Race One Results (July 27, all riding BMW R nineT Racer motorcycles):

1. Nate Kern, USA, 14 laps, Total Race Time 22:46.988, 1:37.026

2. Christof Hofer, Germany, -0.180 second, 1:36.916

3. Marvin Jurgens, Germany, -18.555 seconds, 1:38.330

4. Harald Kitsch, Germany, -24.421, 1:38.833

5. Fritz Spenner, Germany, -24.752, 1:38.629

6. Kai-Uwe Lenz, Germany, -58.387, 1:40.096

7. Holger Aue, Germany, -59.703, 1:41.261

8. Burkhard Bender, Germany, -84.555, 1:41.959

9. Rene Iten, Switzerland, -1 lap, 1:46.665

10. Daniel Werth, Germany, -1 lap, 1.911 seconds, 1:46.736

11. Heinz Schonbrunner, Germany, -1 lap, 27.045 seconds, 1:48.102

12. Marco Gluch, Germany, -5 laps, DNF, 1:41.130

BMW Motorrad Boxer Cup Promoted by Wilbers Race Two Results (July 28, all riding BMW R nineT Racer motorcycles):

1. Christof Hofer, Germany, 14 laps, Total Race Time 22:44.989, Best Lap Time 1:36.377

2. Nate Kern, USA, -3.349 seconds, 1:36.431

3. Marvin Jurgens, Germany, -6.412, 1:36.570

4. Harald Kitsch, Germany, -28.863, 1:38.509

5. Fritz Spenner, Germany, -39.359, 1:39.405

6. Holger Aue, Germany, -51.631, 1:40.201

7. Kai-Uwe Lenz, Germany, -59.293, 1:40.822

8. Burkhard Bender, Germany, -73.341, 1:41.467

9. Marco Gluch, Germany, -96.441, 1:43.067

10. Daniel Werth, Germany, -1 lap, 1:46.274

11. Rene Iten, Switzerland, -1 lap, 0.199 second, 1:45.785

12. Heinz Schonbrunner, Germany, -1 lap, 22.085 seconds, 1:47.498

Championship Point Standings (after 5 of 11 races):

1. Hofer, 120 points

2. Kern, 85

3. Jurgens, 84

4. Kitsch, 55

5. Spenner, 46

6. TIE, Bender/Iten, 39

8. Gluch, 38

9. Werth, 36

10. Lenz, 33

More, from a press release issued by Wunderlich Motorsport:

Wunderlich MOTORSPORT dominates in BMW BoxerCup at Schleizer Dreieck as a part of the IDM

The Wunderlich MOTORSPORT Team and its riders Nate N8! Kern #12 and Christof “Fifty” Höfer #73 took part in the third round of the 2019 BMW Motorrad BoxerCup promoted by Wilbers at the Schleizer Dreieck last weekend, with both earning a race win each.

The race track of “Schleizer Dreieck” is the highlight of the season in the “Internationale Deutsche Motorradmeisterschaft” (IDM) with ten thousands of fans attending the specatular races at Germany’s oldest street racing circuit. The 3.805 kilometre long triangular course is a combination of public roads with gravel traps plus a motodrom section. It is the race of the year in the IDM with most fans coming to here.

So Nate Kern from USA and Christof “Fifty” Höfer from Hessen presented themselves highly motivated to hold the Wunderlich MOTORSPORT flags as high as possible to the Schleizer sky. Already in qualifying both proved to be quick with Kern earning the pole position by only 0.107 seconds in front of his team mate Höfer. Both were unreachable for the opponents.

And again both should be battling it out in race one for the victory with team boss Frank Hoffmann watching the on goings nervously. Höfer did take a bad start and had to fight his way back to Kern. After that, both were changing the leading position in a permanent way with the final decision only to be made on the last lap. Kern took his first BMW BoxerCup race win of the season.

In the second race both, Kern and Höfer, did not take a good start and it was only in lap two when both were again touching the leading positions. Höfer studied his team mate until mid race and then took over at the front and rode through to his fourth win of the season. But it was not a easy cruising for Kern who got a new opponent in Marvin Jürgens – whom he had to take under control during the last laps.

Three out of six BMW BoxerCup rounds are in the books, meaning Höfer leads with 120 points by half time of the season. Team mate Kern (85 pts.) trails him by 35 points, with Jürgen being one behind Kern.

The next race of the BMW Motorrad BoxerCup promoted by Wilbers is to be held from 09. to 11. of August at the Automotodrom Most (Czech republic).

Christof Höfer:

“It has been an unbelievably great weekend at Schleiz – as always! Around 30.000 people attended the event and the atmosphere simply was mega. Fans at Schleiz are celebrating motor racing and it is always a honour to be riding there. Nate and myself were battling to the fullest. Especially in race 1 we were changing positions almost in every corner and nothing separated us. I went to the last lap leading but then he took me coming into the ‘Seng’ corner in sixth gear flat out – I did not expect that move and he took the win and deserved it. So I wanted to win the second race so badly to give my fan club, friends and family something to cheer about. It was another brilliant fight and at the end I could pull a gap. It was also good to see Marvin Jürgens taking us on a fight so we will expect some harder fights and competition in the future.”

Nate Kern:

“What a weekend, what a race track! It was my first time at Schleiz and the fans are outstanding. The track itself was not a problem, we got some more dangerous tracks in the US. It was fun, a proper men’s track. Of course I am happy with my first win and another second. It’s also nice to see some more people mixing is up at the front with us and it will not only be Fifty and me fighting anymore. That’s how it is supposed to be. I am looking forward to our next race in Most already!”

Frank Hoffmann:

“Of course it is a perfect weekend when your riders take home a 1-2 twice – but as team manager you are also happy when everything is over and all are back to the pits safe and sound. Nate and Fifty did not make any presents to each other at all, so you can only bite your nails and hope. But both are experienced racers and know what they are doing. It is also nice to see they got some further competition out there, it is always good to have competition. Both underlined their position in the championship and exceeded their lead. We are very happy.”

MOTORCYCLE MONDAY: BMW’s 2020 S1000RR – All Power, All The Time, And Handling To Match (Includes Video)

Editorial Note: This article was originally published in the May 2019 print issue of Roadracing World & Motorcycle Technology. 

BIKE INTRO: 2020 BMW S1000RR

Estoril, Portugal

ALL POWER, ALL THE TIME

By Chris Ulrich


I roll on the throttle and
load the pegs as I push my body forward over the fuel tank of the BMW at the
exit of Estoril Circuit’s left-hand, 180-degree Turn Four. The front wheel
comes up slightly as the S1000RR rips up through the rpm on the way to Turn
Five, a slightly downhill, fast fifth-gear right-hander with an open exit. I
breathe the throttle to set the front suspension on entry, then get back on the
gas to drive through the corner, and the BMW lights up the rear wheel as I grab
fifth gear and accelerate down the straightaway toward Turn Six. The S1000RR
pulls hard as I wind out fifth gear until I get to the braking zone for Turn
Six, a slightly-downhill, long left-hand turn made famous when Dani Pedrosa
rammed Nicky Hayden during the 2006 MotoGP World Championship race here. But
there are no torpedo jobs on this day as I grab the front brakes and downshift
to second gear. I trail the brakes off as I turn in, releasing the brakes as I
get to full lean, then let the bike drift wide before rotating the BMW around
three quarters of the way through the corner, and clip the inside curb to open
up the exit. The rear wheel spins and the front wheel lifts as I accelerate out
of Turn Six.


I am now at the point where the track gets
really physical, with a long acceleration zone followed by a fast kink, a long
braking zone, then another long corner followed by an acceleration zone that
requires real effort to get through, but I wasn’t in the physical or mental red
zone despite the hot pace. For comparison, on the HP4 RACE in 2017, I had
started to feel some fatigue at this point on the track. It was then that I
realized that BMW engineers really have made the S1000RR easier to ride, and
have still gained performance.

—

The BMW S1000RR redefined
the 1000cc segment when it was introduced in 2009. In the company’s first fully-faired
inline four-cylinder sportbike, BMW engineers created a machine that raised the
performance bar for the category. Before BMW arrived, most 1000cc sportbikes
made less than 160 horsepower at the rear wheel, but the 2009 S1000RR put out
185+ horsepower at the rear wheel, and the arms race was on! The first edition
of the S1000RR had a powerful engine, handled on par with the rest of the
category, and had advanced electronics for the time. It delivered pure
performance but was hard to tame.

The S1000RR also boosted
BMW Motorrad’s public image. The German company now had a cutting-edge
high-performance flagship sportbike to demonstrate its engineering prowess,
sending the message that the company was no longer only about touring and
adventure bikes and opposed twins. BMW’s new machine has claimed a chunk of 1000cc
sportbike sales, too, the company selling 80,000 units worldwide since 2010,
despite a challenging overall motorcycle sales environment. The halo effect the
powerful bike has had on the rest of the model line is also evident, with BMW
marketeers giving the S1000RR credit for helping BMW Motorrad sales grow year
over year. In 2018 alone, BMW sold 165,000 motorcycles and scooters
worldwide.


(Above) Besides making much more power, the 2020 BMW S1000RR is also easier to ride fast at full-power settings on the racetrack, thanks to carefully engineered power delivery and chassis flex characteristics. 


Record unit sales, a new
model launch, and a change to an upper management team that believes in racing
as an effective marketing tool also saw the company field an official factory
team in the 2019 Superbike World Championship. BMW’s desire to use the S1000RR
as a marketing tool to reinforce the brand’s high-performance credentials is stronger than
ever.

—

The goals when BMW officials
decided to build a new 2020 S1000RR were very clear. Create a bike that is
lighter, faster, and more powerful than anything in the segment. Build a
machine that creates a revolution of sorts, like the first S1000RR did. The
ground-up project took close to 300 BMW engineers 46 months to complete and the
results include 8.0 more horsepower, and 24 pounds less weight.


(Above) Because it’s easier to ride hard, the latest BMW doesn’t wear out the rider as quickly as the previous versions.

The 2020 model has a new
twin-spar aluminum frame tuned for optimum handling-enhancing flex (BMW
actually calls it “Flex Frame”) that uses the engine as a stressed member.
The swingarm is effectively longer, the engine is all-new, and a new, more
refined electronics package is easier to adjust and more effective on the
racetrack. So yeah, the new BMW S1000RR
is set to redefine the segment again, with three models, including the base
version, a Race Package version, and an M Package version. The hopped-up M
Package replaces the HP RACE and aligns the brand’s performance motorcycle marketing with the BMW
auto division’s
high-performance M-labeled model variants. The 2020 S1000RR is the
best-balanced, most powerful and most advanced four-cylinder streetbike in the
company’s
history. What it really all means is that the bike makes more power, and the
handling has finally caught up to the power.

—

Because the S1000RR has
been all about power from the start, I’ll start the tech briefing with the powerplant.
It is an all-new 999cc DOHC Inline Four with a bore and stroke of 80mm x
49.7mm, a 13.3:1 compression ratio, and an advanced variable valve timing
system. The new engine is 8.8 pounds lighter, 12mm narrower, shorter, and more
powerful than the previous version’s engine, putting out a claimed 205 bhp at
13,500 rpm and 83.3 lbs.-ft. of torque at 11,000 rpm. More impressive is that
the S1000RR engine makes 73 lbs.-ft. of torque from 4,500 rpm and builds all
the way up to the 14,600 rpm redline.

The weight reduction in the
engine was helped by shaving 3.5 pounds off the crankshaft, which allows the
engine to rev quicker during acceleration while also helping braking and
turning characteristics due to a reduction in centrifugal force. The connecting
rods are also slightly shorter center-to-center, going from 103mm to 99mm.


(Above) The latest S1000RR has a more compact and much lighter crankshaft, without sacrificing power delivery.

BMW engineers wanted to
create an engine with increased top-end power along with more low-end and
mid-range power, but those are normally opposing tuning goals and it’s usually impossible to
have the best of both—unless the valve timing changes midway through the rpm
range. Enter BMW ShiftCam Technology, which changes intake cam timing and lift
on the fly. The system uses servo motors that can only be controlled by BMW’s
Bosch ECU to drop pins into a channel on the intake cam, which moves paired
low-lift/short-duration and high-lift/long-duration lobes controlling each set
of intake valves. Below 9,000 rpm, the
camshaft opens the intake valves with the low-lift/short-duration lobes to
produce better low-end and mid-range power, and above 9,000 rpm the camshaft
opens the intake valves with the adjacent high-lift/long-duration lobes for
better top-end power.



(Above) The Shift-Cam system uses paired low-lift/shorter-duration and high-lift/longer-duration cam lobes, which slide into position over the finger followers depending upon engine rpm, shifting at 9,000 rpm.


The intake port shape has
been changed to work with the ShiftCam system. The head has four valves per
cylinder, titanium intake valves with the center of each stem bored out to
reduce weight, while the exhaust valves are made out of steel. The valves are
actuated by short finger-follower rocker arms that are plated with DLC (Diamond
Like Coating) and weigh 8-grams per unit, which makes them 25% lighter than the
rockers used on the previous model. The lighter weight valve train also allows
the safe rev limit to be increased by 400 rpm to 14,600 rpm. The engine
breathes through a set of four 48mm dual-injector throttle bodies with variable
intake tract length—the air-funnels (velocity stacks) change from long (for
better mid-range) to short (for better top-end) at 11,700 rpm.

The stainless steel exhaust
system contains two-three way catalytic converters. The mid-pipe and silencer
are shorter to increase performance and improve the sound, and the system is
2.8 pounds lighter thanks to the exhaust tube thickness being reduced from
0.8mm to 0.5mm.


(Above) The S1000RR engine uses a link-plate chain to drive the cams through a central gear.
 

The engine is tilted
forward at a 32-degree angle; using the engine as a load-bearing element
allowed engineers to reduce the new twin-spar frame’s weight by 2.8 pounds. The
geometry has also been changed, with rake reduced to 23.1 degrees which, when
combined with a triple clamp offset of 29.5mm, reduces the trail by 2.6mm to
93.9mm. Overall frame width at the base of the fuel tank has been slimmed down
by between 13mm and 30mm, depending on where it is measured. This might not be
a detail many people understand or pay attention to, but the center point of
the bike is where the rider meets the fuel tank and establishes their base.
Having the width right is important to allow the correct amount of support for
the legs to reduce fatigue, but not so much that is hinders movement. The
previous versions of the S1000RR were too wide in this area.


(Above) BMW has caught up in chassis performance with its “Flex Frame.”

The new chassis also
features a works-style cast-aluminum-alloy underslung swingarm that is just over
half a pound lighter than the previous model’s swingarm. Measured from the pivot to the
axle, the swingarm is 610mm long, which is the same as the previous model’s swingarm, but there is
an additional 35mm of chain adjustment left to actually increase the effective
swingarm length. Three options for swingarm pivot position adjustment are also
available: Stock, +2mm or -2mm. The swingarm downslope angle in the stock
position sits at 12.54 degrees, which is about optimal for the balance between
grip and linear slide characteristics.

(Above) The swingarm also has engineered flex.

BMW has switched to an
electronically controlled Marzocchi rear shock with a 46mm piston. The shock is
now mounted vertically and moved to minimize its exposure to radiant heat from
the engine. Changes to suspension linkage allow the rear spring rate to be
reduced from a 9.5 Nm to a 6.0 Nm, and the motion ratio for the rear shock
linkage went from 1.900:1 to 1.673:1 with a progression of 11.5 degrees. What
this means in the real world is more rear grip and longer tire life.

A set of electronically
controlled 45mm inverted Marzocchi cartridge front forks replace the 46mm Sachs
units used on the previous model. Like with the rest of the bike, the aim for
the front fork change was to increase feel reaching the rider without sacrificing
the balance of the bike. Reducing the
slider diameter is a good way to do that.

Suspension action front and
rear is controlled by BMW’s Dynamic Damping Control (DDC) system. The Marzzochi
version of DDC uses a conventional piston that has shims to control the damping
force based on the Riding Mode Selected. BMW engineers switched to a more
conventional suspension set up to give the S1000RR a more natural feeling on
the road and racetrack. There are four DDC settings available on the standard
bike, and each setting coincides with a Riding mode. In the standard Rain,
Road, Dynamic, and Race Modes the DDC is semi-­active—reacting to suspension
movement and rate of change by increasing or reducing damping within a pre-set
range that can’t
be adjusted. Dynamic Mode gives more support and Race Mode gives the most
support. Full adjustment of the suspension settings is available in the Riding
Mode Pro, which is sold as an ECU upgrade. The semi-active feature is turned
off in the Pro modes; damping changes are still made through the DDC function
in the dash, but the system is designed to do nothing automatically in that
mode. The way BMW engineers describe computer interaction between the modes is
simple: Rain and Road Modes are 90% DDC and 10% conventional, while the Race
track settings are 100% conventional. Again, the aim is to give the rider a
more natural feeling while also allowing easy adjustment of suspension
settings.

(Above) Making power and also meeting emissions regulations requires lots of exhaust system volume, which BMW engineers placed underneath the engine to keep the muffler relatively small. 


As with all modern 1000cc
sportbikes, the S1000RR comes with an advanced electronics suite with an
ever-growing list of capabilities. The 2020 version seems to be the
least-complicated, yet most­-advanced version yet. All strategies are based on
measurements taken from a six-axis Bosch Inertial Measurement Unit (IMU). The
base ECU setting comes with the four Standard Riding Modes: Rain, Road,
Dynamic, and Race. Each riding mode has pre-set settings for throttle response,
torque maps, ABS, DDC, engine braking, Dynamic Brake Control, and wheelie
control. As before, traction control can be adjusted in the standard mode, with
15 levels of TC intervention—stock, stock +7, stock -7, and off. There are also
pre-set display options for the 6.5-inch TFT dash.


(Above) Race Pro electronics on the Race Package and M Package models include three settings, each with pre-set parameters. It’s an available $250 option on the standard model.

Additional functionality is
available by upgrading the ECU software to unlock the Pro Modes, which include
three setting options that can be customized to suit the rider’s preferences.
The software upgrades are included with the Race Package and M Package or can
be purchased individually for $250.

There are three
customizable Pro Modes: Pro Mode 1, Pro Mode 2, and Pro Mode 3, each setting
having a subset of adjustment that is customizable. For example, there are 15
levels of traction control available in each riding mode within Pro Mode. Other
rider aids that tended to confuse riders by providing too much adjustability—for example, Engine
Braking and Wheelie Control—now have three levels of adjustment. Traction
control can be changed on the fly, but all other settings, including the mode,
cannot.

BMW fans will notice that
the new Bimmer has a symmetrical front fairing; the previous asymmetrical
headlight version was created with styling in mind, but the main reason behind
the look was to reduce weight. Separating the low and high beam lights allowed
engineers to reduce the weight of the headlight package, but now, that’s not necessary thanks to
advancements in LED lighting technology. The 2020 model has a sleek,
symmetrical, aerodynamic upper fairing.

Cast aluminum wheels come
fitted on the base model, while the Race Package gets forged aluminum wheels,
and the M Package bike comes equipped with a set of lightweight carbon-fiber
wheels. The braking components have been changed, and all three versions come with American-made Hayes front brake
calipers with 32mm pistons and a Nissan radial master cylinder. Front disc
diameter remains 320mm. And for the first time, BMW is offering the S1000RR
with Bridgestone S21 DOT-labeled tires as original equipment.

The base model is available
for $16,995, the Race Package adds $1,600, while the M Package will cost an
additional $3,700. BMW is expecting 2020 S1000RRs to available in showroom
floors late in 2019.

—

The day of riding consisted
of five, 15-minute sessions for each rider/reporter. The press group started
the day on Bridgestone Battlax S21 DOT-labeled tires before moving on to
Battlax VO2 slicks in the afternoon. We all rode S1000RR models with the M
Package upgrade which is highlighted by carbon-fiber wheels and the Pro Mode
electronics package.

The first session of the
day was spent rolling around in Pro Mode 2 with the traction control turned up
to Level 3. It was a good opportunity for me to reacquaint myself with the
layout of Estoril while checking out the grip of the new pavement laid down in
the second half of 2018. The layout of Estoril is good for testing, combining
long braking zones and a good mix of slow, medium, and high-speed corners.

The new S1000RR made more
power than I expected and the power removal was much smoother than in previous
models—which demonstrates that BMW engineers worked really hard on the
ride-by-wire throttle maps. At full lean and through the acceleration zone, the
ECU removed power, but then smoothly fed the power back in when the bike was
straight up and down. My initial
impression of the ergonomics and chassis was positive. The bike turned in
better and was easier to transition than the previous model, and no doubt this
was helped by the carbon-fiber wheels

With the cobwebs blown out,
I upped my pace in the second session, but I left the traction control turned
up just to see how the S1000RR and Bridgestone S21s reacted as I went
quicker. A lot of power available at my
wrist combined with a street tire made for an entertaining session, but it also
showed how much the traction control strategies have improved since 2009. BMW
uses a two-stage approach to traction control; the first is what the engineers
described as slow, or pre-control, which removes power based on lean angle and
TC setting using the throttle plates. The second is by ignition cut, which is for
fast, unexpected events, like a sudden slide. Think of it as the Save Your Ass
(SYA) tool—and I used the SYA feature of the TC a few times on the S21 tires!
Anyway, BMW engineers improved the function of the traction control by placing
both pre-control TC and SYA TC on the same channel in the ECU. Both systems get
the same feedback from sensors, allowing them to work in unison when
intervening.

On corner entry the ABS was
busier than the traction control; I had a few more front-end tucks than I was
comfortable with as I went quicker; after four big moments, I backed off the
pace and decided to wait for the slicks before I pushed any harder.

The real testing started
when the Bridgestone V02 slicks were fitted onto the bike for the afternoon
sessions. As usual grip brings out the best (or worst) in a bike and the BMW
was no exception. I was able to get down to business with grippy slick tires on
the bike. I played with some traction control settings as the day went on, but
eventually ended up on TC -2 because it had the right ratio of spin-to-power
removal to allow me to turn better lap times around Estoril.

I really noticed the
changes to the ergonomics as I picked up the pace. The new fuel tank design
allowed me to lock in my outer leg and support myself during heavy braking,
which took pressure off my shoulders and forearms, while still allowing me to
move side-to-side without any hindrance. The seating position and seat height
also helped take pressure off my shoulders, while allowing me to be agile on
the bike. You see a theme here? BMW’s engineers paid close attention to the
dynamic position of the rider to limit fatigue. And it was apparent on-track at
Estoril.

The S1000RR engine has a
very linear power band that delivers tractable power—the whole point of
variable valve timing. The engine starts making good power as low as 4,000 rpm
and carries it until the ShiftCam switches to the top-end setting as engine
speed climbs past 9,000 rpm. The throttle connection from first touch all the
way through the acceleration zone is really good; the power is there, so you
always know where you are, but it isn’t so much that the bike is unmanageable.
Then it keeps pulling as the ShiftCam transitions to top-end power settings.
Another power boost comes in when the variable-length stacks open to their
top-end phase as the engine passes through 11,700 rpm. There isn’t any big,
defined hit along the way; the bike just keeps making more power and ripping
through the rpm gear after gear! The power never goes away!

There’s something about ABS and ripping around a
racetrack that does not compute, and while the new BMW’s ABS is better on-track than the previous
models, it isn’t
perfect—and nobody else’s is, either. It still starts to fade (or intervene) after 3-4 laps of
hard riding, but it feels like fade. But unlike with the previous models, the
system then remains consistent and predictable. (Sometimes the lever would
unexpectedly come in to the handlebar on the previous models.)

The front suspension
performance during braking was good, especially in the long braking zone coming
off the front straight into Turn One; the forks had plenty of support to allow
me to brake later as I went from sixth to second gear, but still had good feel
that allowed me to trail the brakes deep into the corner. The biggest
improvement from Marzocchi DDC forks is the feel deep in the stroke; BMW engineers
have managed to find the right damping setting and oil level to improve front
feel from corner entry all the way into the middle of the corner.

The rear suspension worked
well on corner exit through the acceleration zone. I added some support to the
rear by changing the DDC setting to make the bike finish the corner a little
better. The feel from first touch of the throttle was good, and drive grip was
also decent, as were the slide characteristics of the rear during hard
acceleration.

I experimented with some of
the other rider aids as the day went on, starting with the engine braking
control. I tried moving the engine braking setting from the mid-range Level 2
to the least amount of intervention, Level 1, but then struggled to slow the
bike down without using more brake pressure than I wanted and I started missing
apexes all over the track. So I returned to the pits and put the setting back
to Level 2.

The middle wheelie control
setting also functioned well, allowing the S1000RR to carry the front wheel
during acceleration, but not let things get out of control or slow the bike
down. That demonstrates that BMW engineers have
really done a good job with the most recent ECU and electronics
development.

—

By the end of the day, I’d
done all five of my 15-minute sessions including a lot of hard riding on the
2020 S1000RR and I wasn’t sore. In fact, I was barely tired, which says a lot
about the rideability of the bike. In 2009 BMW unleashed a high-powered weapon
that forced every manufacturer in the segment to step up their performance.
They did, and they brought weapons that were just as fast, but easier to ride
for longer periods of time. Now BMW has responded and made one of the most
brutal 1000cc sportbikes on the market also one of the easiest sportbikes to
ride without sacrificing any of the pure performance we’ve come to expect from
the Bavarian company’s engineers.

It’s really good!

SPECIFICATIONS: 2020 BMW S1000RR Standard/Race Package/M Package


MotoAmerica Racer Kaleb De Keyrel Seriously Injured In Crash (Updated)

Kaleb De Keyrel, the 22-year-old who won his debut race in the MotoAmerica Twins Cup class at July 13 WeatherTech Raceway Laguna Seca, was seriously injured in a crash July 27, during this past weekend’s AFM race event at Thunderhill Raceway Park. 

Earlier Monday, De Keyrel posted the following to his Facebook page: “Just wanted to give everyone an update on what’s going on and up until this point we weren’t 100% sure on everything. I had an extremely fast crash yesterday in my first race of the day at Thunderhill at the AFM series, when my brakes failed going into turn 1. I didn’t have any choice but to lay the bike or I was going to hit a wall at 160 mph. As soon as I laid it down I start to flip and as a result of the tumbling. I broke my femur and sacrum. They airlifted me in a helicopter due to the hospital being a 50min drive away. I will be going into surgery at noon today to get a rod put in my femur and just ask if you could pray that everything goes well with the surgery. I am extremely lucky with how everything played out and God was definitely looking out for me every step of the way. I am feeling pretty good being the situation and just want to get this surgery out of the way so I can get to recovery. Huge thank you to everyone that has reached out y’all are amazing! Also thank you to my amazing girlfriend for taking care of me here in the hospital and my team for everything this weekend! Thank you too all of my sponsors for having the best equipment to keep me protected.”

Roadracingworld.com attempted to reach De Keyrel, but he did not answer his mobile phone.

De Keyrel was riding a John Anderson Racing Yamaha YZF-R1 at Thunderhill and not the Roaring Toyz/1-833-CJ-Knows Yamaha FZ-07 he used to win the MotoAmerica Twins Cup race at Laguna Seca.

We will post updated information as it becomes available.

UPDATE: Roaring Toyz/1-833-CJ-Knows Team Owner Robert Fisher has relayed a report from De Keyrel’s girlfriend Marissa Lahner stating De Keyrel is out of surgery, the procedure went well, and he should be able to start his recovery and rehabilitation immediately.

AHRMA Hosting Benefit For Roadracing World Action Fund

AHRMA Benefit For Roadracing World Action Fund To Help Improve Rider Safety

AHRMA is hosting a benefit for the Roadracing World Action Fund, a 501(c)(3) non-profit charity with a mission of improving rider safety by educating riders as well as track and organization officials about the importance of deploying soft barriers, as well as facilitating the deployment of soft barriers.

Since its founding in 2001, the RWAF has raised money to purchase and deploy (and maintain, repair, and replace) hundreds of sections of soft barriers (made by Airfence and by Alpina) at races and track day events at dozens of racetracks nationwide. The soft barriers are designed to be placed and tied down in front of steel barriers, concrete walls, tire walls, and dirt and rock embankments located in impact zones at racetracks. Soft barriers work when air held in an ambient air chamber is forced through blow-off valves at a controlled rate to absorb energy from an impact and decelerate a rider, helping reduce the potential for serious injuries.


(Above) Inflatable Alpina soft barriers deployed at a MotoAmerica Supersport race at Virginia International Raceway. Photo by Brian J. Nelson.

MotoAmerica racer Kyle Wyman demonstrated how effective soft barriers can be when his Superbike lost its front brakes at 150 mph (due to a set of brake pads falling out) on a racetrack straightaway. Data acquisition systems on his bike and in his leathers showed that Wyman left the track at 140 mph and bailed out in a gravel trap; Wyman himself body-slammed a RWAF Airfence-brand soft barrier section (deployed in front of a tire wall) at 104 mph, decelerated to 0 mph in the thickness of the section (about four feet), and walked away without suffering life-changing injuries!


(Above) Kyle Wyman sitting up and catching his breath after body-slamming an Airfence inflatable soft barrier at 104 mph. Photo by beIN SPORTS, courtesy of MotoAmerica.

Every soft barrier section that AHRMA funds will have an AHRMA logo imprinted on one end, which is a great way to give AHRMA national exposure!

AHRMA members are invited to participate in AHRMA’s fundraiser by making a tax-deductible donation directly to the Roadracing World Action Fund using the methods outlined below. Please make sure to note with your donation that your contribution is in support of AHRMA’s fundraising efforts. In exchange for your donation, you will receive correspondence permitting you to claim your charitable donation as a tax deduction.

Our fundraiser starts immediately, and will continue through October 31, 2019.

How to Donate

To help save lives and prevent injuries at the racetrack, you may make your donation as follows:

•call (909) 654-4779 to donate by credit card (M – F, 9:00 a.m. – 5:00 p.m. Pacific Time);

•donate via Paypal to [email protected]; or

•send your tax deductible donation to:

Roadracing World Action Fund

P.O. Box 1428

Lake Elsinore, CA 92531

Your name will be added to Roadracing World’s growing list of contributors.


(Above) A racer passes by inflatable Airfence soft barriers at Auto Club Speedway. Photo by CaliPhotography.com.

More About Soft Barriers

Soft barriers come in two versions, a inflatable longer version (about 30 feet long) designed to be folded up and transported between tracks, and another, shorter version (about six feet long) which does not fold up and is designed to deploy at a single track. The ambient air chamber in the longer version is supported by inflated ribs and columns, and the barrier is inflated before being deployed and tied down. The ambient air chamber in the shorter version (which does not fold up) is supported by closed-cell foam ribs and columns, which are less likely to be damaged or need repair after being hit by a crashed motorcycle. Both types of soft barriers have been deployed during every AHRMA event weekend at New Jersey Motorsports Park since 2012, with the inflatable sections deployed and maintained by an ASRA/CCS crew.

Other racing organizations RWAF is currently working with (or has worked with) include MotoAmerica, AHRMA, AMA Racing, ASRA/CCS, AFM, CMRA, LRRS, MCRA, SMRI, and WERA. Track day organizations RWAF is currently working with include Fastrack Riders, Midwest, Motovid, N2, PRE, XCEL, and others.

World Endurance: More From The Championship Finale At The Suzuka 8-Hours

At The Suzuka 8 Hours, Pirelli Wins The 2018-19 FIM Endurance World Championship With The Victorious Team SRC Kawasaki France

The Final Round of the Championship Saw SRC Kawasaki France’s ZX-10RR Fitted with the DIABLO™ Superbike Slick Tires in a Larger Size and SCX Compound

SUZUKA, Japan – On the occasion of the famous Suzuka 8 Hours endurance race, whose 42nd edition was held yesterday, Pirelli won the 2018-19 FIM Endurance World Championship equipping, with DIABLO™ Superbike slick tires in larger size and in the new SCX compound, Team SRC Kawasaki France.

Starting from the 14th position on the grid, the Kawasaki ZX-10RR No.11 ridden by Jérémy Guarnoni, David Checa and Erwan Nigon crossed the finish line of the last Championship race in 12th position after making 209 laps and eight pit stops in the eight hours. That was enough to gain the world title thanks to the excellent performances obtained in the other events of the World Championship.

As usual in the FIM Superbike World Championship, Pirelli supported its teams participating in the FIM Endurance World Championship by offering them the latest technological solution developments. In this case, the DIABLO™ Superbike slick tires in the larger sizes 200/65 rear and 125/70 front which, just this year, have joined the Pirelli range. In particular, in the five Championship races, the riders mostly used tires from the larger range, SC1 at the front and SC0 at the rear, but at the Suzuka grand finale the new SCX compound solution also played a key role.

Crucially for Pirelli these larger sized tires in their debut year have earned two important accolades in the series, firstly winning the prestigious 24 Hours of Le Mans and then the FIM Endurance World Championship.

A season to be remembered for both Team SRC Kawasaki France together with Pirelli but certainly not without challenges and difficulties to overcome. In the first round, the Bol d’Or (which took place in September 2018), in qualifying the team obtained the pole position and the circuit lap record but in the race, after 22 hours in command and with four laps advantage, an electrical problem forced the riders in for several stops forcing them to finish the race only in seventh position. The result obtained in the 24 Hours of Le Mans last April was quite different and the win, with a decisive overtaking move less than 15 minutes before the end of the race, was their sixth victory in the last 10 years. At the 8 Hours Slovakia Ring in May, bad luck returned to hit the French team, which, after starting in fifth position, after an hour and a half race was forced to retire due to engine failure. Up to the penultimate race of the Championship, the 8 Hours of Oschersleben, where Team SRC Kawasaki France gained another splendid pole position and a second place in the race. Then finally a return to the head of the Championship and to lift the cup of the World Champions at the Suzuka 8 Hours race yesterday.

Over the five events the Pirelli-shod Kawasaki ZX-10RR No.11 logged some impressive numbers: over 10,000 kilometers ridden, 2,078 laps raced, 73 pit stops, 2 pole positions, 1 victory, 1 second place and the icing on the cake, the world title!

Pirelli therefore celebrates the regained title of FIM Endurance World Champion and for the Suzuka, namely the victory in the Superstock class with the BMW TONE RT SYNCEDGE 4413 team.

The next event is now for the opening round of the 2019-20 FIM World Endurance Championship, which will start on September 20, 2019 on the Paul Ricard Circuit of Le Castellet where the 83rd edition of Bol d’Or will take place.

More, from a press release issued by Kawasaki Motors Europe:

SRC Kawasaki France – EWC Champions 2019

Team SRC Kawasaki France are on top of the World: After starting 14th on the grid for the Suzuka 8Hours, the team managed by Gilles Stafler won the 2019 EWC crown after a huge human investment throughout the season.

On Sunday, July 28 11:30am local time the 42nd edition of the 8 hours of Suzuka began – even in the face of a predicted typhoon. No less than sixty six machines set off from the grid ready for a World Championship final which promised to be thrilling throughout.

A dry track start for this most physical event of the year saw Erwan Nigon achieve an excellent start and hold a promising 9th place. A short-lived performance because after only 18 minutes of racing the safety car was on track between the team’s chief rival for the title and the famous #11 Ninja machine. The second incident for the #11 in the first phase of the race was the unfortunate fall of Nigon at the chicane when he temporarily lost front grip.

At half race the three riders were proving strong and competitive amongst illustrious company . No major issues were reported for David Checa, Erwan Nigon and Jérémy Guarnoni who performed their allotted tasks perfectly. Whilst at the mercy of refueling stops the #11 oscillated between 17th and 14th position.

For Suzuka, the customary retirements and stoppages did not feature as much this year making the SRC Kawasaki France riders’ opportunity catch up to the top ranking very challenging indeed. Endurance can be cruel to some when it delivers unexpected – or unasked for – good fortune to others. Likewise, in a surprising final once again, the French based team captured the 2019 World title due to the engine failure of their main rival….. at 7:55 race time – just 5 minutes from the finish!

The team of Gilles Stafler were then “virtually world champions”, yet with a handful of minutes left the scene was of nervous anguish. David Checa piloting the bike redoubled his efforts focusing on avoiding any last second issues; hard as there was not just overnight rain left on the track surface but oil from a rivals blown engine. The last moments of the race seemed like an eternity for the friendly Calatalan rider. However, it did liltle to disrupt the very experienced pilot of the #11 Ninja ZX-10RR who burst into tears of emotion after the checkered flag had been waved to signify race end.

David Checa: “This finish is indescribable, what a sensation! I tried to contain my tears but sorry, I can not do it. The emotions were too intense, my joy is all the stronger as I went through moments of doubt lately but tonight with my teammates Jeremy and Erwan, we are world champions! I cannot thank enough Kawasaki and Gilles Stafler for this unforgettable season!”

Understandably there is real pride among the team for whom this title could not be won without the considerable investment of Kawasaki Motors France and all the sponsor partners who can never be thanked enough.

The SRC Kawasaki France team are now 2018/2019 Endurance World Champions. And, somewhat appropriately, the #11 finishes at position number 11 just 1 lap from the top 10 after 8 grueling yet ultimately glorious hours.

British Superbike: Hector Barbera To Continue With Quattro Plant Kawasaki At Thruxton

Barberá Set to Go into Battle for Quattro Plant Kawasaki at Thruxton

Former MotoGP rider Héctor Barberá will line-up for Quattro Plant JG Speedfit Kawasaki in round seven of the Bennetts British Superbike Championship this weekend following the departure of Glenn Irwin.

This will be Barberá’s fourth outing for the team after deputising for the injured Ben Currie at Donington Park in May, when he made his BSB debut, and the following round at Brands Hatch in June.

More recently the 32-year-old stood in for Glenn Irwin, who was unable to ride due to illness, at Snetterton claiming an impressive seventh-place finish on his first visit to the Norfolk circuit.

Ben, who is still recovering after breaking bones in both feet and damaging his knee ligaments at Oulton Park in May, will be riding alongside his Spanish team-mate.

In 2018 the Australian took top Supersport honours in the first race at Thruxton and now he’s hoping for a repeat performance on the Superbike.

Sidecar teams Ricky Stevens/Ryan Charlwood and Ben Holland/Lee Watson will also be in action in the Molson Group British Sidecar Championship.

Both outfits fared much better than of late during the last round at Snetterton when Stevens/Charlwood took a brace of third-place finishes and team-mates Holland/Watson secured fifth and sixth.

Héctor said: “After learning more about the bike at Snetterton I am very excited to be asked to ride for the team again at Thruxton. It’s another new circuit, which is always a challenge, but one that I am really looking forward to.

“The BSB fans are incredible and I just want to put on a good show for them and the team. Thank you again to Pete and Kawasaki for this opportunity.”

Ben said: “We keep making progress and I’m getting better and better on the bike but it’s been hard to build up any momentum as I’ve had hardly any time on the bike after the crash at Oulton Park.

“My foot has massively improved since Knockhill but it’s hard to tell if it’s 100 per cent better; before a race weekend I start off feeling great but then it gradually deteriorates.

“Hopefully before the end of year it’ll be back to 110 per cent and we’ll be able to get some decent track time in. I’ve just got to focus on my recovery and keep working hard in the gym to improve my fitness so I can make the best of every situation.”

Pete Extance, team owner, said: “Thruxton marks the halfway point for the 2019 BSB Championship and it’s our home round with many of my Bournemouth Kawasaki customers and friends coming along to support us which is always nice.

“It’s great to have Héctor back on the bike especially as it’s a very fast-flowing circuit which I think will suit him and hopefully he will be pushing closer to the podium.

“For Ben it’s the next stage of his recovery and without a doubt he is in a much better position than two weeks ago at Snetterton and will looking for top ten results.”

Ricky said: “We’re feeling much more confident going into round six as we feel like our luck has finally changed for the better!

“It’s been a very challenging championship this year to say the least as we’ve been plagued with technical issues and involved in several crashes which have all taken their toll on us and the bike.

“However, Snetterton was much more positive as we were in the lead at some points and it felt good to be back in contention. Thruxton is one of our favourite circuits as it’s very fast but it’s also our home round so all our friends and family will be there.”

Holland said: “We’re past the halfway point in the championship so we need to secure some podium points at Thruxton to propel us up the table. After such a difficult start it would be good to finish the season on a high!”

MotoGP: Marc Marquez Says “We Can’t Take Anything For Granted”

Repsol Honda Team back in action at Brno

After a brief respite, the Repsol Honda Team return to action recharged and ready to attack the second half of 2019.

Always among the busiest and highest attended races of the year, the Czech GP is a favourite with fans and riders alike. The 5.4km long circuit welcomes the MotoGP World Championship back to action after their brief summer break, the Repsol Honda Team eager to return to track and continue fighting for victory.

Having delivered a supreme performance at the German GP, Marc Marquez entered the mid-season break with a generous 58-point lead in the MotoGP World Championship. Defending this advantage over his title rivals is the main objective for the reigning World Champion at the Czech GP. The Automotodrom Brno is amongst Marquez’s most consistent circuits – only once finishing off the podium since joining the premier class in 2013 and never finishing outside of the top five.

HRC Test Rider Stefan Bradl will again join Marc Marquez in the Repsol Honda Team garage as Jorge Lorenzo continues his recovery from his fall in Assen. The German rider has had an intense workload since finishing in the top ten at the Sachsenring; going on to take a podium finish at the legendary Suzuka 8 Hours race alongside his usual testing duties. Bradl is aiming for another strong weekend and is looking to build on the what he and the team achieved in Germany.

Jorge Lorenzo continues to work on his recovery in order to return for the British GP.

Marc Marquez

“I am very excited to get back on the bike. Summer break is always nice to relax a little bit, but soon you miss the team and the bike! I am ready to get back to work and Brno is a fun circuit to ride. We finished the first half of the season in a very strong way and now we must keep our focus to continue this. Brno is a circuit where lots of riders are often strong so we can’t take anything for granted. I hope Jorge’s recovery is going well and we will soon have him back in the team.”

Stefan Bradl

“Of course I’m looking forward to Brno and it’s great to be back with the Repsol Honda Team as I really enjoyed working with them at the Sachsenring. Our aim is to carry on from where we left in Germany and keep moving forward with the bike. I’m happy to get this chance again and I want to thank HRC and the Repsol Honda Team. Of course all the best to Jorge in his recovery and that he can come back strong.”

Video: MotoAmerica Superbike Racer Mathew Scholtz Tells How He Gets It Done At WeatherTech Raceway Laguna Seca

In this video, MotoAmerica Superbike racer Mathew Scholtz tells Dave Williams about how he gets his Westby Racing Yamaha YZF-R1 around WeatherTech Raceway Laguna Seca.
 

Get On The Track! 2019 Roadracing World Trackday Directory


Ready To Get On The Track? The 2019 Roadracing World Annual Trackday Directory Special Issue Has All The Info You Need. Available Now! Click here to order.

     When you’re ready to hit the racetrack for some track day
fun, turn to the 2019 Roadracing World Trackday Directory! Everything – and we
mean everything – you need before you start out doing track days can be found
in one place. How to select, acquire and improve a motorcycle for track days.
How to learn to ride more quickly and safely. Loading and unloading a
motorcycle – and what else to load before you leave.

     But the 2019 Roadracing World Trackday Directory has far
more than just information about your motorcycle. Read the information you must
have when selecting the best protective gear, the right tires for you and your
bike, the racing suits that perform best for men and women.

     You’ll also read about coaching, training, and dream
vacations that include track days at Grand Prix racetracks, where and when
every track day in the United States is scheduled to take place, and contact
information for the track day organization nearest you.

Pick up a copy of the 2019 Roadracing World Trackday
Directory
today. It’s the one piece of equipment every track day rider needs. Click here to order.

PREVIEW  2019
Roadracing World Annual Trackday Directory

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

Visit www.roadracingworld.com daily for breaking news and events.

https://www.facebook.com/roadracingworld

https://twitter.com@roadracingworld

https://instagram.com@roadracing_world

Join the Roadracing World Online Community of Racers, Riders,
& Fans. Post photos and results, make connections with sponsors, and more!
Create your Roadracing World Online Profile today!

www.roadracingworld.com/signup

​AFM/MotoAmerica Racer Jayson Uribe Injured In Crash At Thunderhill Raceway Park

Jayson Uribe, a top star in the AFM regional series and a
top-10-finishing privateer in the MotoAmerica Superbike Championship, was
injured in a crash he suffered during round four of the AFM Championship series
July 27 at Thunderhill Raceway Park.

Uribe was riding his Honda CBR1000RR during qualifying for
Formula Pacific, AFM’s premier class, when he lost traction and subsequently suffered
a third-gear highside crash exiting Turn Two.

“I saw on my pit board P2 and +0.3,” Uribe told Roadracingworld.com.
“I thought, ‘I can do that.’ I decided to go for a quicker lap time. I think
what ended up happening was I power slid a little bit coming out of Turn Two
and it slid just enough to get the engine case to slide on the ground. And then
as soon as the case touched the ground it picked up the bike like it had a
third pivot point and spun the bike all the way around and spit me off.”

And as if spitting him off at over 100 mph wasn’t bad
enough, Uribe’s motorcycle wasn’t finished with him.

“I was looking backwards at the track,” said Uribe, “and
pretty much the bike hit me in the face. I never lost consciousness. My head’s
fine. My Arai helmet did a great job.”

Uribe, however, was transported from the racetrack via
medivac helicopter to Enloe Medical Center, in Chico, California, where he underwent
surgery to repair damage to his left arm.

“I have lost two more bones from my elbow,” said Uribe. “One
ground away to nothing and one got ejected out of my body in the crash. And I
tore my triceps [muscle] off of my elbow. So I got my triceps re-attached to my
elbow, and we’re good to go.”

Uribe expected to be released from the hospital Monday, but
he isn’t sure exactly when he will return to racing action.

“I’m trying my best to heal up as quickly as I can,” said
Uribe. “I want to ride in the MotoAmerica round at Sonoma, but right now all of
the [sponsor] contracts I have are for AFM. So my priority is to make sure I do
that and see where it goes from there.”

BMW Boxer Cup: Nate Kern, Christof Hofer Split Wins At Schleizer-Dreieck (Updated)

IDM Championship Series

Schleizer-Dreieck, Germany

July 27-28, 2019

BMW Motorrad Boxer Cup Promoted by Wilbers Race One Results (July 27, all riding BMW R nineT Racer motorcycles):

1. Nate Kern, USA, 14 laps, Total Race Time 22:46.988, 1:37.026

2. Christof Hofer, Germany, -0.180 second, 1:36.916

3. Marvin Jurgens, Germany, -18.555 seconds, 1:38.330

4. Harald Kitsch, Germany, -24.421, 1:38.833

5. Fritz Spenner, Germany, -24.752, 1:38.629

6. Kai-Uwe Lenz, Germany, -58.387, 1:40.096

7. Holger Aue, Germany, -59.703, 1:41.261

8. Burkhard Bender, Germany, -84.555, 1:41.959

9. Rene Iten, Switzerland, -1 lap, 1:46.665

10. Daniel Werth, Germany, -1 lap, 1.911 seconds, 1:46.736

11. Heinz Schonbrunner, Germany, -1 lap, 27.045 seconds, 1:48.102

12. Marco Gluch, Germany, -5 laps, DNF, 1:41.130

BMW Motorrad Boxer Cup Promoted by Wilbers Race Two Results (July 28, all riding BMW R nineT Racer motorcycles):

1. Christof Hofer, Germany, 14 laps, Total Race Time 22:44.989, Best Lap Time 1:36.377

2. Nate Kern, USA, -3.349 seconds, 1:36.431

3. Marvin Jurgens, Germany, -6.412, 1:36.570

4. Harald Kitsch, Germany, -28.863, 1:38.509

5. Fritz Spenner, Germany, -39.359, 1:39.405

6. Holger Aue, Germany, -51.631, 1:40.201

7. Kai-Uwe Lenz, Germany, -59.293, 1:40.822

8. Burkhard Bender, Germany, -73.341, 1:41.467

9. Marco Gluch, Germany, -96.441, 1:43.067

10. Daniel Werth, Germany, -1 lap, 1:46.274

11. Rene Iten, Switzerland, -1 lap, 0.199 second, 1:45.785

12. Heinz Schonbrunner, Germany, -1 lap, 22.085 seconds, 1:47.498

Championship Point Standings (after 5 of 11 races):

1. Hofer, 120 points

2. Kern, 85

3. Jurgens, 84

4. Kitsch, 55

5. Spenner, 46

6. TIE, Bender/Iten, 39

8. Gluch, 38

9. Werth, 36

10. Lenz, 33

More, from a press release issued by Wunderlich Motorsport:

Wunderlich MOTORSPORT dominates in BMW BoxerCup at Schleizer Dreieck as a part of the IDM

The Wunderlich MOTORSPORT Team and its riders Nate N8! Kern #12 and Christof “Fifty” Höfer #73 took part in the third round of the 2019 BMW Motorrad BoxerCup promoted by Wilbers at the Schleizer Dreieck last weekend, with both earning a race win each.

The race track of “Schleizer Dreieck” is the highlight of the season in the “Internationale Deutsche Motorradmeisterschaft” (IDM) with ten thousands of fans attending the specatular races at Germany’s oldest street racing circuit. The 3.805 kilometre long triangular course is a combination of public roads with gravel traps plus a motodrom section. It is the race of the year in the IDM with most fans coming to here.

So Nate Kern from USA and Christof “Fifty” Höfer from Hessen presented themselves highly motivated to hold the Wunderlich MOTORSPORT flags as high as possible to the Schleizer sky. Already in qualifying both proved to be quick with Kern earning the pole position by only 0.107 seconds in front of his team mate Höfer. Both were unreachable for the opponents.

And again both should be battling it out in race one for the victory with team boss Frank Hoffmann watching the on goings nervously. Höfer did take a bad start and had to fight his way back to Kern. After that, both were changing the leading position in a permanent way with the final decision only to be made on the last lap. Kern took his first BMW BoxerCup race win of the season.

In the second race both, Kern and Höfer, did not take a good start and it was only in lap two when both were again touching the leading positions. Höfer studied his team mate until mid race and then took over at the front and rode through to his fourth win of the season. But it was not a easy cruising for Kern who got a new opponent in Marvin Jürgens – whom he had to take under control during the last laps.

Three out of six BMW BoxerCup rounds are in the books, meaning Höfer leads with 120 points by half time of the season. Team mate Kern (85 pts.) trails him by 35 points, with Jürgen being one behind Kern.

The next race of the BMW Motorrad BoxerCup promoted by Wilbers is to be held from 09. to 11. of August at the Automotodrom Most (Czech republic).

Christof Höfer:

“It has been an unbelievably great weekend at Schleiz – as always! Around 30.000 people attended the event and the atmosphere simply was mega. Fans at Schleiz are celebrating motor racing and it is always a honour to be riding there. Nate and myself were battling to the fullest. Especially in race 1 we were changing positions almost in every corner and nothing separated us. I went to the last lap leading but then he took me coming into the ‘Seng’ corner in sixth gear flat out – I did not expect that move and he took the win and deserved it. So I wanted to win the second race so badly to give my fan club, friends and family something to cheer about. It was another brilliant fight and at the end I could pull a gap. It was also good to see Marvin Jürgens taking us on a fight so we will expect some harder fights and competition in the future.”

Nate Kern:

“What a weekend, what a race track! It was my first time at Schleiz and the fans are outstanding. The track itself was not a problem, we got some more dangerous tracks in the US. It was fun, a proper men’s track. Of course I am happy with my first win and another second. It’s also nice to see some more people mixing is up at the front with us and it will not only be Fifty and me fighting anymore. That’s how it is supposed to be. I am looking forward to our next race in Most already!”

Frank Hoffmann:

“Of course it is a perfect weekend when your riders take home a 1-2 twice – but as team manager you are also happy when everything is over and all are back to the pits safe and sound. Nate and Fifty did not make any presents to each other at all, so you can only bite your nails and hope. But both are experienced racers and know what they are doing. It is also nice to see they got some further competition out there, it is always good to have competition. Both underlined their position in the championship and exceeded their lead. We are very happy.”

MOTORCYCLE MONDAY: BMW’s 2020 S1000RR – All Power, All The Time, And Handling To Match (Includes Video)

Editorial Note: This article was originally published in the May 2019 print issue of Roadracing World & Motorcycle Technology. 

BIKE INTRO: 2020 BMW S1000RR

Estoril, Portugal

ALL POWER, ALL THE TIME

By Chris Ulrich


I roll on the throttle and
load the pegs as I push my body forward over the fuel tank of the BMW at the
exit of Estoril Circuit’s left-hand, 180-degree Turn Four. The front wheel
comes up slightly as the S1000RR rips up through the rpm on the way to Turn
Five, a slightly downhill, fast fifth-gear right-hander with an open exit. I
breathe the throttle to set the front suspension on entry, then get back on the
gas to drive through the corner, and the BMW lights up the rear wheel as I grab
fifth gear and accelerate down the straightaway toward Turn Six. The S1000RR
pulls hard as I wind out fifth gear until I get to the braking zone for Turn
Six, a slightly-downhill, long left-hand turn made famous when Dani Pedrosa
rammed Nicky Hayden during the 2006 MotoGP World Championship race here. But
there are no torpedo jobs on this day as I grab the front brakes and downshift
to second gear. I trail the brakes off as I turn in, releasing the brakes as I
get to full lean, then let the bike drift wide before rotating the BMW around
three quarters of the way through the corner, and clip the inside curb to open
up the exit. The rear wheel spins and the front wheel lifts as I accelerate out
of Turn Six.


I am now at the point where the track gets
really physical, with a long acceleration zone followed by a fast kink, a long
braking zone, then another long corner followed by an acceleration zone that
requires real effort to get through, but I wasn’t in the physical or mental red
zone despite the hot pace. For comparison, on the HP4 RACE in 2017, I had
started to feel some fatigue at this point on the track. It was then that I
realized that BMW engineers really have made the S1000RR easier to ride, and
have still gained performance.

—

The BMW S1000RR redefined
the 1000cc segment when it was introduced in 2009. In the company’s first fully-faired
inline four-cylinder sportbike, BMW engineers created a machine that raised the
performance bar for the category. Before BMW arrived, most 1000cc sportbikes
made less than 160 horsepower at the rear wheel, but the 2009 S1000RR put out
185+ horsepower at the rear wheel, and the arms race was on! The first edition
of the S1000RR had a powerful engine, handled on par with the rest of the
category, and had advanced electronics for the time. It delivered pure
performance but was hard to tame.

The S1000RR also boosted
BMW Motorrad’s public image. The German company now had a cutting-edge
high-performance flagship sportbike to demonstrate its engineering prowess,
sending the message that the company was no longer only about touring and
adventure bikes and opposed twins. BMW’s new machine has claimed a chunk of 1000cc
sportbike sales, too, the company selling 80,000 units worldwide since 2010,
despite a challenging overall motorcycle sales environment. The halo effect the
powerful bike has had on the rest of the model line is also evident, with BMW
marketeers giving the S1000RR credit for helping BMW Motorrad sales grow year
over year. In 2018 alone, BMW sold 165,000 motorcycles and scooters
worldwide.


(Above) Besides making much more power, the 2020 BMW S1000RR is also easier to ride fast at full-power settings on the racetrack, thanks to carefully engineered power delivery and chassis flex characteristics. 


Record unit sales, a new
model launch, and a change to an upper management team that believes in racing
as an effective marketing tool also saw the company field an official factory
team in the 2019 Superbike World Championship. BMW’s desire to use the S1000RR
as a marketing tool to reinforce the brand’s high-performance credentials is stronger than
ever.

—

The goals when BMW officials
decided to build a new 2020 S1000RR were very clear. Create a bike that is
lighter, faster, and more powerful than anything in the segment. Build a
machine that creates a revolution of sorts, like the first S1000RR did. The
ground-up project took close to 300 BMW engineers 46 months to complete and the
results include 8.0 more horsepower, and 24 pounds less weight.


(Above) Because it’s easier to ride hard, the latest BMW doesn’t wear out the rider as quickly as the previous versions.

The 2020 model has a new
twin-spar aluminum frame tuned for optimum handling-enhancing flex (BMW
actually calls it “Flex Frame”) that uses the engine as a stressed member.
The swingarm is effectively longer, the engine is all-new, and a new, more
refined electronics package is easier to adjust and more effective on the
racetrack. So yeah, the new BMW S1000RR
is set to redefine the segment again, with three models, including the base
version, a Race Package version, and an M Package version. The hopped-up M
Package replaces the HP RACE and aligns the brand’s performance motorcycle marketing with the BMW
auto division’s
high-performance M-labeled model variants. The 2020 S1000RR is the
best-balanced, most powerful and most advanced four-cylinder streetbike in the
company’s
history. What it really all means is that the bike makes more power, and the
handling has finally caught up to the power.

—

Because the S1000RR has
been all about power from the start, I’ll start the tech briefing with the powerplant.
It is an all-new 999cc DOHC Inline Four with a bore and stroke of 80mm x
49.7mm, a 13.3:1 compression ratio, and an advanced variable valve timing
system. The new engine is 8.8 pounds lighter, 12mm narrower, shorter, and more
powerful than the previous version’s engine, putting out a claimed 205 bhp at
13,500 rpm and 83.3 lbs.-ft. of torque at 11,000 rpm. More impressive is that
the S1000RR engine makes 73 lbs.-ft. of torque from 4,500 rpm and builds all
the way up to the 14,600 rpm redline.

The weight reduction in the
engine was helped by shaving 3.5 pounds off the crankshaft, which allows the
engine to rev quicker during acceleration while also helping braking and
turning characteristics due to a reduction in centrifugal force. The connecting
rods are also slightly shorter center-to-center, going from 103mm to 99mm.


(Above) The latest S1000RR has a more compact and much lighter crankshaft, without sacrificing power delivery.

BMW engineers wanted to
create an engine with increased top-end power along with more low-end and
mid-range power, but those are normally opposing tuning goals and it’s usually impossible to
have the best of both—unless the valve timing changes midway through the rpm
range. Enter BMW ShiftCam Technology, which changes intake cam timing and lift
on the fly. The system uses servo motors that can only be controlled by BMW’s
Bosch ECU to drop pins into a channel on the intake cam, which moves paired
low-lift/short-duration and high-lift/long-duration lobes controlling each set
of intake valves. Below 9,000 rpm, the
camshaft opens the intake valves with the low-lift/short-duration lobes to
produce better low-end and mid-range power, and above 9,000 rpm the camshaft
opens the intake valves with the adjacent high-lift/long-duration lobes for
better top-end power.



(Above) The Shift-Cam system uses paired low-lift/shorter-duration and high-lift/longer-duration cam lobes, which slide into position over the finger followers depending upon engine rpm, shifting at 9,000 rpm.


The intake port shape has
been changed to work with the ShiftCam system. The head has four valves per
cylinder, titanium intake valves with the center of each stem bored out to
reduce weight, while the exhaust valves are made out of steel. The valves are
actuated by short finger-follower rocker arms that are plated with DLC (Diamond
Like Coating) and weigh 8-grams per unit, which makes them 25% lighter than the
rockers used on the previous model. The lighter weight valve train also allows
the safe rev limit to be increased by 400 rpm to 14,600 rpm. The engine
breathes through a set of four 48mm dual-injector throttle bodies with variable
intake tract length—the air-funnels (velocity stacks) change from long (for
better mid-range) to short (for better top-end) at 11,700 rpm.

The stainless steel exhaust
system contains two-three way catalytic converters. The mid-pipe and silencer
are shorter to increase performance and improve the sound, and the system is
2.8 pounds lighter thanks to the exhaust tube thickness being reduced from
0.8mm to 0.5mm.


(Above) The S1000RR engine uses a link-plate chain to drive the cams through a central gear.
 

The engine is tilted
forward at a 32-degree angle; using the engine as a load-bearing element
allowed engineers to reduce the new twin-spar frame’s weight by 2.8 pounds. The
geometry has also been changed, with rake reduced to 23.1 degrees which, when
combined with a triple clamp offset of 29.5mm, reduces the trail by 2.6mm to
93.9mm. Overall frame width at the base of the fuel tank has been slimmed down
by between 13mm and 30mm, depending on where it is measured. This might not be
a detail many people understand or pay attention to, but the center point of
the bike is where the rider meets the fuel tank and establishes their base.
Having the width right is important to allow the correct amount of support for
the legs to reduce fatigue, but not so much that is hinders movement. The
previous versions of the S1000RR were too wide in this area.


(Above) BMW has caught up in chassis performance with its “Flex Frame.”

The new chassis also
features a works-style cast-aluminum-alloy underslung swingarm that is just over
half a pound lighter than the previous model’s swingarm. Measured from the pivot to the
axle, the swingarm is 610mm long, which is the same as the previous model’s swingarm, but there is
an additional 35mm of chain adjustment left to actually increase the effective
swingarm length. Three options for swingarm pivot position adjustment are also
available: Stock, +2mm or -2mm. The swingarm downslope angle in the stock
position sits at 12.54 degrees, which is about optimal for the balance between
grip and linear slide characteristics.

(Above) The swingarm also has engineered flex.

BMW has switched to an
electronically controlled Marzocchi rear shock with a 46mm piston. The shock is
now mounted vertically and moved to minimize its exposure to radiant heat from
the engine. Changes to suspension linkage allow the rear spring rate to be
reduced from a 9.5 Nm to a 6.0 Nm, and the motion ratio for the rear shock
linkage went from 1.900:1 to 1.673:1 with a progression of 11.5 degrees. What
this means in the real world is more rear grip and longer tire life.

A set of electronically
controlled 45mm inverted Marzocchi cartridge front forks replace the 46mm Sachs
units used on the previous model. Like with the rest of the bike, the aim for
the front fork change was to increase feel reaching the rider without sacrificing
the balance of the bike. Reducing the
slider diameter is a good way to do that.

Suspension action front and
rear is controlled by BMW’s Dynamic Damping Control (DDC) system. The Marzzochi
version of DDC uses a conventional piston that has shims to control the damping
force based on the Riding Mode Selected. BMW engineers switched to a more
conventional suspension set up to give the S1000RR a more natural feeling on
the road and racetrack. There are four DDC settings available on the standard
bike, and each setting coincides with a Riding mode. In the standard Rain,
Road, Dynamic, and Race Modes the DDC is semi-­active—reacting to suspension
movement and rate of change by increasing or reducing damping within a pre-set
range that can’t
be adjusted. Dynamic Mode gives more support and Race Mode gives the most
support. Full adjustment of the suspension settings is available in the Riding
Mode Pro, which is sold as an ECU upgrade. The semi-active feature is turned
off in the Pro modes; damping changes are still made through the DDC function
in the dash, but the system is designed to do nothing automatically in that
mode. The way BMW engineers describe computer interaction between the modes is
simple: Rain and Road Modes are 90% DDC and 10% conventional, while the Race
track settings are 100% conventional. Again, the aim is to give the rider a
more natural feeling while also allowing easy adjustment of suspension
settings.

(Above) Making power and also meeting emissions regulations requires lots of exhaust system volume, which BMW engineers placed underneath the engine to keep the muffler relatively small. 


As with all modern 1000cc
sportbikes, the S1000RR comes with an advanced electronics suite with an
ever-growing list of capabilities. The 2020 version seems to be the
least-complicated, yet most­-advanced version yet. All strategies are based on
measurements taken from a six-axis Bosch Inertial Measurement Unit (IMU). The
base ECU setting comes with the four Standard Riding Modes: Rain, Road,
Dynamic, and Race. Each riding mode has pre-set settings for throttle response,
torque maps, ABS, DDC, engine braking, Dynamic Brake Control, and wheelie
control. As before, traction control can be adjusted in the standard mode, with
15 levels of TC intervention—stock, stock +7, stock -7, and off. There are also
pre-set display options for the 6.5-inch TFT dash.


(Above) Race Pro electronics on the Race Package and M Package models include three settings, each with pre-set parameters. It’s an available $250 option on the standard model.

Additional functionality is
available by upgrading the ECU software to unlock the Pro Modes, which include
three setting options that can be customized to suit the rider’s preferences.
The software upgrades are included with the Race Package and M Package or can
be purchased individually for $250.

There are three
customizable Pro Modes: Pro Mode 1, Pro Mode 2, and Pro Mode 3, each setting
having a subset of adjustment that is customizable. For example, there are 15
levels of traction control available in each riding mode within Pro Mode. Other
rider aids that tended to confuse riders by providing too much adjustability—for example, Engine
Braking and Wheelie Control—now have three levels of adjustment. Traction
control can be changed on the fly, but all other settings, including the mode,
cannot.

BMW fans will notice that
the new Bimmer has a symmetrical front fairing; the previous asymmetrical
headlight version was created with styling in mind, but the main reason behind
the look was to reduce weight. Separating the low and high beam lights allowed
engineers to reduce the weight of the headlight package, but now, that’s not necessary thanks to
advancements in LED lighting technology. The 2020 model has a sleek,
symmetrical, aerodynamic upper fairing.

Cast aluminum wheels come
fitted on the base model, while the Race Package gets forged aluminum wheels,
and the M Package bike comes equipped with a set of lightweight carbon-fiber
wheels. The braking components have been changed, and all three versions come with American-made Hayes front brake
calipers with 32mm pistons and a Nissan radial master cylinder. Front disc
diameter remains 320mm. And for the first time, BMW is offering the S1000RR
with Bridgestone S21 DOT-labeled tires as original equipment.

The base model is available
for $16,995, the Race Package adds $1,600, while the M Package will cost an
additional $3,700. BMW is expecting 2020 S1000RRs to available in showroom
floors late in 2019.

—

The day of riding consisted
of five, 15-minute sessions for each rider/reporter. The press group started
the day on Bridgestone Battlax S21 DOT-labeled tires before moving on to
Battlax VO2 slicks in the afternoon. We all rode S1000RR models with the M
Package upgrade which is highlighted by carbon-fiber wheels and the Pro Mode
electronics package.

The first session of the
day was spent rolling around in Pro Mode 2 with the traction control turned up
to Level 3. It was a good opportunity for me to reacquaint myself with the
layout of Estoril while checking out the grip of the new pavement laid down in
the second half of 2018. The layout of Estoril is good for testing, combining
long braking zones and a good mix of slow, medium, and high-speed corners.

The new S1000RR made more
power than I expected and the power removal was much smoother than in previous
models—which demonstrates that BMW engineers worked really hard on the
ride-by-wire throttle maps. At full lean and through the acceleration zone, the
ECU removed power, but then smoothly fed the power back in when the bike was
straight up and down. My initial
impression of the ergonomics and chassis was positive. The bike turned in
better and was easier to transition than the previous model, and no doubt this
was helped by the carbon-fiber wheels

With the cobwebs blown out,
I upped my pace in the second session, but I left the traction control turned
up just to see how the S1000RR and Bridgestone S21s reacted as I went
quicker. A lot of power available at my
wrist combined with a street tire made for an entertaining session, but it also
showed how much the traction control strategies have improved since 2009. BMW
uses a two-stage approach to traction control; the first is what the engineers
described as slow, or pre-control, which removes power based on lean angle and
TC setting using the throttle plates. The second is by ignition cut, which is for
fast, unexpected events, like a sudden slide. Think of it as the Save Your Ass
(SYA) tool—and I used the SYA feature of the TC a few times on the S21 tires!
Anyway, BMW engineers improved the function of the traction control by placing
both pre-control TC and SYA TC on the same channel in the ECU. Both systems get
the same feedback from sensors, allowing them to work in unison when
intervening.

On corner entry the ABS was
busier than the traction control; I had a few more front-end tucks than I was
comfortable with as I went quicker; after four big moments, I backed off the
pace and decided to wait for the slicks before I pushed any harder.

The real testing started
when the Bridgestone V02 slicks were fitted onto the bike for the afternoon
sessions. As usual grip brings out the best (or worst) in a bike and the BMW
was no exception. I was able to get down to business with grippy slick tires on
the bike. I played with some traction control settings as the day went on, but
eventually ended up on TC -2 because it had the right ratio of spin-to-power
removal to allow me to turn better lap times around Estoril.

I really noticed the
changes to the ergonomics as I picked up the pace. The new fuel tank design
allowed me to lock in my outer leg and support myself during heavy braking,
which took pressure off my shoulders and forearms, while still allowing me to
move side-to-side without any hindrance. The seating position and seat height
also helped take pressure off my shoulders, while allowing me to be agile on
the bike. You see a theme here? BMW’s engineers paid close attention to the
dynamic position of the rider to limit fatigue. And it was apparent on-track at
Estoril.

The S1000RR engine has a
very linear power band that delivers tractable power—the whole point of
variable valve timing. The engine starts making good power as low as 4,000 rpm
and carries it until the ShiftCam switches to the top-end setting as engine
speed climbs past 9,000 rpm. The throttle connection from first touch all the
way through the acceleration zone is really good; the power is there, so you
always know where you are, but it isn’t so much that the bike is unmanageable.
Then it keeps pulling as the ShiftCam transitions to top-end power settings.
Another power boost comes in when the variable-length stacks open to their
top-end phase as the engine passes through 11,700 rpm. There isn’t any big,
defined hit along the way; the bike just keeps making more power and ripping
through the rpm gear after gear! The power never goes away!

There’s something about ABS and ripping around a
racetrack that does not compute, and while the new BMW’s ABS is better on-track than the previous
models, it isn’t
perfect—and nobody else’s is, either. It still starts to fade (or intervene) after 3-4 laps of
hard riding, but it feels like fade. But unlike with the previous models, the
system then remains consistent and predictable. (Sometimes the lever would
unexpectedly come in to the handlebar on the previous models.)

The front suspension
performance during braking was good, especially in the long braking zone coming
off the front straight into Turn One; the forks had plenty of support to allow
me to brake later as I went from sixth to second gear, but still had good feel
that allowed me to trail the brakes deep into the corner. The biggest
improvement from Marzocchi DDC forks is the feel deep in the stroke; BMW engineers
have managed to find the right damping setting and oil level to improve front
feel from corner entry all the way into the middle of the corner.

The rear suspension worked
well on corner exit through the acceleration zone. I added some support to the
rear by changing the DDC setting to make the bike finish the corner a little
better. The feel from first touch of the throttle was good, and drive grip was
also decent, as were the slide characteristics of the rear during hard
acceleration.

I experimented with some of
the other rider aids as the day went on, starting with the engine braking
control. I tried moving the engine braking setting from the mid-range Level 2
to the least amount of intervention, Level 1, but then struggled to slow the
bike down without using more brake pressure than I wanted and I started missing
apexes all over the track. So I returned to the pits and put the setting back
to Level 2.

The middle wheelie control
setting also functioned well, allowing the S1000RR to carry the front wheel
during acceleration, but not let things get out of control or slow the bike
down. That demonstrates that BMW engineers have
really done a good job with the most recent ECU and electronics
development.

—

By the end of the day, I’d
done all five of my 15-minute sessions including a lot of hard riding on the
2020 S1000RR and I wasn’t sore. In fact, I was barely tired, which says a lot
about the rideability of the bike. In 2009 BMW unleashed a high-powered weapon
that forced every manufacturer in the segment to step up their performance.
They did, and they brought weapons that were just as fast, but easier to ride
for longer periods of time. Now BMW has responded and made one of the most
brutal 1000cc sportbikes on the market also one of the easiest sportbikes to
ride without sacrificing any of the pure performance we’ve come to expect from
the Bavarian company’s engineers.

It’s really good!

SPECIFICATIONS: 2020 BMW S1000RR Standard/Race Package/M Package


MotoAmerica Racer Kaleb De Keyrel Seriously Injured In Crash (Updated)

Kaleb De Keyrel, the 22-year-old who won his debut race in the MotoAmerica Twins Cup class at July 13 WeatherTech Raceway Laguna Seca, was seriously injured in a crash July 27, during this past weekend’s AFM race event at Thunderhill Raceway Park. 

Earlier Monday, De Keyrel posted the following to his Facebook page: “Just wanted to give everyone an update on what’s going on and up until this point we weren’t 100% sure on everything. I had an extremely fast crash yesterday in my first race of the day at Thunderhill at the AFM series, when my brakes failed going into turn 1. I didn’t have any choice but to lay the bike or I was going to hit a wall at 160 mph. As soon as I laid it down I start to flip and as a result of the tumbling. I broke my femur and sacrum. They airlifted me in a helicopter due to the hospital being a 50min drive away. I will be going into surgery at noon today to get a rod put in my femur and just ask if you could pray that everything goes well with the surgery. I am extremely lucky with how everything played out and God was definitely looking out for me every step of the way. I am feeling pretty good being the situation and just want to get this surgery out of the way so I can get to recovery. Huge thank you to everyone that has reached out y’all are amazing! Also thank you to my amazing girlfriend for taking care of me here in the hospital and my team for everything this weekend! Thank you too all of my sponsors for having the best equipment to keep me protected.”

Roadracingworld.com attempted to reach De Keyrel, but he did not answer his mobile phone.

De Keyrel was riding a John Anderson Racing Yamaha YZF-R1 at Thunderhill and not the Roaring Toyz/1-833-CJ-Knows Yamaha FZ-07 he used to win the MotoAmerica Twins Cup race at Laguna Seca.

We will post updated information as it becomes available.

UPDATE: Roaring Toyz/1-833-CJ-Knows Team Owner Robert Fisher has relayed a report from De Keyrel’s girlfriend Marissa Lahner stating De Keyrel is out of surgery, the procedure went well, and he should be able to start his recovery and rehabilitation immediately.