Home Blog Page 996

Tried And Tested: Bilmola Forged-Carbon RC-1 Helmet, Made In Thailand

Copyright 2022, Roadracing World Publishing, Inc.

By Michael Gougis

Where and when there is a need, manufacturing follows. There is a need for helmets in Thailand, a country of 70 million people. According to the Pew Research Center, there are at least 15 million motorcycles in use in the country, or, to put it another way, an incredible 87% of all Thai households own at least one motorcycle. In comparison, only 14% of all U.S. households own a motorcycle.

Bilmola, a Thai company, started producing helmets for other companies in 2010, and has in recent years started to produce products under its own name. In 2020, the company established a U.S. headquarters in California, and early in 2022 introduced its latest high-performance, full-face helmet, the RC-1.

 

The Travis Wyman Replica Bilmola RC-1 is not available for sale in the U.S. until 2023. Here, Wyman is climbing the Stock 1000 podium at Pittsburgh International Race Complex. Photo by Brian J. Nelson.
The Travis Wyman Replica Bilmola RC-1 will not be sold in the U.S. until 2023. Here, Wyman is climbing the Stock 1000 podium at Pittsburgh International Race Complex. Photo by Brian J. Nelson.

 

The helmet completely looks the part of a high-tech, cutting-edge protective device. The forged composite shell shows off its structural materials, with the helmet finished in a clear coat and the composites on clear display. The styling is angular, sharp and modern.

After several hundreds of miles wearing this helmet on a variety of motorcycles–sportbike, naked and touring–I can say it is an impressive first effort, although not quite up to the standards of the premium helmets that are in its price range.

Tech Specs

The Bilmola RC-1’s shell is made with a forged composite material and process. Also known as forged carbon, it differs from traditional carbon-fiber in that the pieces of carbon fiber are smaller and are pressed into position in the resin as it cures. The process does away with the labor-intensive manual layup of pre-impregnated sheets of carbon fiber.

According to a paper presented at the American Society of Composites 26th Technical Conference in Montreal in 2011, the process uses high pressures in addition to heat to cure the material. The process comes from the world of the truly high-end–it was developed by the Callaway Golf Company and Lamborghini!

 

The author wearing a Bilmola RC-1 during a recent Yamaha new model press launch. The Bilmola RC-1 helmet's forged composite construction gives it a high-tech, cutting edge look. Photo by Ali Donze/courtesy Yamaha.
The author wearing a Bilmola RC-1 during a recent Yamaha new model press launch. The Bilmola RC-1 helmet’s forged composite construction gives it a high-tech, cutting edge look. Photo by Ali Donze/courtesy Yamaha.

 

Forged composite materials are stronger that traditional carbon-fiber and have smaller variations in strength, and cures in three to five minutes, the paper states. In addition, it can be formed into more complex shapes. In the Lamborghini demonstration vehicle–the Sesto Elemento–the suspension control arms made from forged composite materials were cheaper and quicker to make and 30% lighter than the same part made from forged aluminum. Manufacturing suspension parts from the material took only six minutes from start to finished product, the paper stated.

The RC-1 comes in two shell sizes–medium and small. There are three different expanded polystyrene (EPS) lining sizes, and combined with different sizes of the lining material–a product the company calls Active Air padding–the helmet is available in six sizes from S to XXL.

 

The forged composite construction process allows for a lighter shell than traditional carbon fiber and sharper, more complex shapes. Photo courtesy Bilmola.
The forged composite construction process allows for a lighter shell than traditional carbon fiber and sharper, more complex shapes. Photo courtesy Bilmola.

 

The shell is designed with a spoiler, two intake air vents–one at the chin, another above the visor–and two air extractors. The antibacterial lining is claimed to dry 30 to 50% more quickly than the industry standard. The optical-quality visor is made of an anti-scratch material and features a positive locking mechanism at the bottom and center of the visor. The visors come in dark smoke, light smoke, and clear, and are compatible with Pinlock 70 Maxvision inserts. A traditional dual D-ring system secures the helmet, and an emergency release tab releases the cheek pads with a single pull in case the helmet needs to be removed from an injured rider.

Weight is a claimed 1350 grams, or about 2.97 pounds. Suggested retail price is $523.

Riding Impressions

Picking up the RC-1 confirms the company’s claims on weight–it is very light in the hand. Changing the installed clear shield to the optional dark shield was a snap as well, with the rotational mechanisms clearly visible. On the positive side of the ledger, on my head (I tested the medium size) the helmet felt very light. The visor was indeed crystal-clear, and once secured, it did a very good job of sealing out the wind.

Airflow in the helmet was well controlled, although a bit more ventilation through the chin would have been helpful in the roasting Southern California spring and summer riding season. There was little or no buffeting, and sound levels inside the helmet were relatively low.

And the helmet looks completely badass. It got a lot of compliments from other riders, who thought it cost literally twice its actual price.

 

An Emergency Release system allows EMTs or other medical personnel to remove the cheek pads with a single pull. Photo courtesy Bilmola.
An Emergency Release system allows EMTs or other medical personnel to remove the cheek pads with a single pull. Photo courtesy Bilmola.

 

Negatives were few, and at least one is simply a matter of philosophy. Compared to the other helmets in this price range, the RC-1 felt less refined. While the sound levels were low, the helmet had a hollow sound, compared to the relative hush of higher-end helmets.

The lining handled sweat and perspiration well, but the edge of the EPS lining across the forehead had a sharp edge, compared to the larger-radius edge found on more premium helmets. This led to a hot spot of discomfort, although only after a hundred miles or more on a single ride. And the button release on the visor was a bit small and could be difficult to find with racing gloves on.

And the philosophy part? While the helmet meets ECE R22.05 and DOT certification standards, many if not most other helmets in this price range are Snell Foundation certified. For years, Snell certification has been the gold standard for premium helmets, and buyers in this market–especially for racing purposes–frequently are looking for that final assurance of performance in a crash. One unanswered question is, how does a helmet with a forged carbon-fiber shell perform in a Snell test compared to a helmet with a laminated fiberglass or laminated carbon-fiber shell? Does it absorb more energy and transmit less energy?

Overall, it is a very good first effort, and a helmet that with a bit more refinement could take its place as a product that, if not direct competition for the premium brands in the U.S., at least a viable, lower-cost alternative.

 

Benefit: Buy Dunlop Q5s, Do Track Day, & Help RWAF Buy More Airfence

Dunlop and Warhorse HSBK Racing Ducati NYC are supporting the Roadracing World Action Fund with a special deal at a special track day.

Dunlop is donating 100% of the sales of 20 sets of brand-new Sportmax Q5 track day tires for use during the Warhorse HSBK Racing Ducati NYC track day on August 29, 2022, at Pocono Raceway.

In addition to track time, the track day will feature appearances by Warhorse HSBK Racing Ducati NYC rider Josh Herrin and Dunlop tire engineer Anthony “Tony” Romo, who will be on hand to help Dunlop customers.

Riders who have registered for the Warhorse HSBK Racing Ducati NYC track day can purchase one set of the new Q5 tires (either 120/70-17 and 180/60-17 or 120/70-17 and 200/60-17) for $300 per set, and the entire $300 will be donated to the Roadracing World Action Fund.

 

One of Dunlop's new Sportmax Q5 track day tires. Photo courtesy Dunlop.
One of Dunlop’s new Sportmax Q5 track day tires. Photo courtesy Dunlop.

 

The Roadracing World Action Fund is a 501(c)(3) non-profit organization that promotes motorcycle racetrack safety education, helping prevent racetrack injuries by encouraging, facilitating, and funding the deployment of life-saving soft barriers at motorcycle road races and track days nationwide.

The Dunlop Q5 tires can be purchased (and must be mounted to wheels) at Warhorse HSBK Racing 1000 Dunham Dr., Dunmore, PA 18512 (570-346-2453) starting on Friday, August 26 or they can be purchased trackside (without mandatory mounting) at Pocono Raceway on August 29.

Either way the purchaser must prove that they are registered for the track day.

Only 10 sets of each size pairing will be available through this special deal.

In addition to helping support the work of the Roadracing World Action Fund and being one of the first riders in North America to try out Dunlop’s new Q5, participants in the track day will also get a $100 coupon from Dunlop good toward a future tire purchase at any participating Dunlop dealer.

To learn more about Dunlop motorcycle tires or to find a local authorized Dunlop motorcycle tire dealer, go to: https://www.dunlopmotorcycletires.com/

To sign up for or to get more information about the Warhorse HSBK Racing Ducati NYC track day August 29 at Pocono Raceway, go to: https://www.ducatinyc.com/–xpss?fbclid=IwAR1b51olalp0Tyq1hczUr0gmDIpSdVpRhHDa5a1jw3Ov7YcBDoiw9vPJfxw#/products/view/47

To make a tax-deductible donation or to learn more about the Roadracing World Action Fund, go to: https://www.roadracingworld.com/actionfund/

Intro: 2022 Energica Experia Green Tourer, In The August Issue

Featured In the August 2022 issue of Roadracing World:

        Green barely begins to describe the scenery in the Dolomite mountains of Italy in summertime. It is achingly beautiful mountainsides, lush with grass and tall evergreen trees, and vast swaths of verdant landscape bisected by ski lift cables that run everywhere. 

       In the winter, when all of this is buried under a thick, white blanket of snow, skiers from around the world converge here, testing themselves against the slopes that have produced World Champions and immersing themselves in the skiing community and lifestyle.

        Even in the summer, the air is crisp, and it has even more than the smell of the trees and pastures. It has a taste that can be described only as clean. 

        It seemed appropriate for Energica, perhaps the world’s most well-known fully electric motorcycle manufacturer, to invite journalists from around the world to this beautiful place to introduce its latest offering…

—Energica’s Big Bet, by Michael Gougis   

Energica has taken the lessons learned in GP-level racing and applied them to its newest machine—the Experia Green Tourer. See what one of the world’s leading electric motorcycle manufacturers has done to push the boundaries of electric motorcycling in the latest issue of Roadracing World!

PREVIEW  the August 2022 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats.

SUBSCRIBE NOW ! Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday.

Read the August 2022 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world

—

MotoAmerica: Gagne Doing WorldSBK Testing At Buttonwillow

Jake Gagne, the defending MotoAmerica Superbike Champion and the current MotoAmerica Championship point leader, is testing this week at Buttonwillow Raceway Park, in preparation for his World Superbike wild card appearance in Portugal later this season.

A few weeks ago, Yamaha announced that after the conclusion of the 2022 MotoAmerica Medallia Superbike Championship at Barber Motorsports Park in September, Gagne and his crew will crate up one of his Fresh N Lean Progressive Yamaha YZF-R1 Superbikes and head over to Europe to participate as a wild card in the FIM Superbike World Championship round October 7-9 at Algarve International Circuit, in Portimao, Portugal.

While the YZF-R1s ridden by Pata Yamaha’s Toprak Razgatlioglu and Andrea Locatelli in World Superbike are very similar to the machine Gagne races in MotoAmerica Superbike, there are some significant differences.

For starters, MotoAmerica races on Dunlop control tires and World Superbike races on Pirelli control tires. And the difference between the two series’ fuel regulations require some minor changes in the engine build and tuning. And finally, World Superbikes are allowed to use an alternate set of internal gear ratios with a neutral lockout.

With all of this in mind, the Fresh N Lean Progressive Yamaha team returned from this past weekend’s MotoAmerica event at Pittsburgh International Race Complex to their base in Huntington Beach, California, on Monday, built Gagne a World Superbike-spec engine and transmission on Tuesday, and started testing at Buttonwillow on Wednesday and Thursday.

The goal is to allow Gagne to learn the differences in the WorldSBK-spec machine and to reacclimate himself to Pirelli tires, which he used when racing for the factory Red Bull Honda team in the 2018 Superbike World Championship. That season, Gagne earned four top-10 finishes while only failing to finish races twice.

According to messages from Fresh N Lean Progressive Yamaha Team Owner Richard Stanboli today, they are learning a lot so far at the test, but things are complicated by the fact that the ambient temperature at Buttonwillow on Wednesday was about 106˚ F (41˚ C) and the track temperature was 140˚ F (60 C). Conditions are expected to be the same today.

In 2021, the ambient temperatures at Algarve ranged from 79˚ F (26˚ C) during Race One to 72˚ F (22˚ C) during Race Two, and the track temperatures ranged from 113˚ F (45˚ C) during Race One to 106˚ F (41˚ C) in Race Two.

Yamaha Continuing To Support All Kids Bike Program

Yamaha Continues Investing in the Future for Outdoor Enthusiasts
New Yamaha Grants Aid Public Land Managers, Recreationalists, and Thousands of Kids Nationwide

 

MARIETTA, Ga. – August 25, 2022 – Yamaha Motor Corp., USA, today announces the Yamaha Outdoor Access Initiative (OAI) grant awards totaling $145,175 for the second quarter of 2022 in support of its ongoing mission to protect, improve, and expand access to public land for motorized and outdoor recreation. This quarter, Yamaha OAI resources were deployed to help national efforts, as well as specific projects directly impacting the future of motorized recreation. Projects being funded in the second quarter grant cycle include:

  • Developing a database of public land trades to help generate public awareness and involvement in protecting access for recreation.
  • Conducting a workshop educating land managers on sustainable trail building and maintenance to protect the safety of riders and the future of access on public lands.
  • Significant trail rehabilitation and rerouting efforts to improve off-road experiences while protecting sensitive environments.
  • Introducing kindergarteners to biking.

“We continue to prioritize projects offering innovative and sustainable solutions to the problems facing access to land for motorized and outdoor recreation. This quarter’s applicants delivered in many impactful ways and we are excited to continue being involved in making real progress on the ground,” said Steve Nessl, Yamaha’s Motorsports marketing manager. “We are additionally pleased to continue our partnership with The Nature Conservancy in Tennessee in support of their efforts to build 150 miles of legal motorized trails on the Northumberland Plateau.”

The second quarter grants for 2022 have been awarded to six applicants:

  • Colorado Wild Public Lands — Basalt, CO
  • Indian Creek Valley ATV Club – Indian Head, PA
  • Limestone Trail Hawks — Aroostook County, ME
  • National Off-Highway Vehicle Conservation Council
  • All Kids Bike
  • The Nature Conservancy – Tennessee Chapter

The application deadline for consideration in the third quarter of this year’s funding cycle is September 30, 2022, and riding clubs, land stewardship associations, and public land managers are encouraged to work together with Yamaha dealers to identify projects and apply for support. To aid those considering applying for a Yamaha OAI grant, visit YamahaOAI.com for submission guidelines, an application, answers to most popular questions about the program, and recaps of some typical projects.

About the Yamaha Outdoor Access Initiative

Since 2008, the Yamaha Outdoor Access Initiative has led the Powersports industry in supporting responsible access to our nation’s public lands for outdoor enthusiasts. With more than $5 million contributed to 400 projects across the country, Yamaha has directly and indirectly supported thousands of miles of motorized recreation trails, maintained and rehabilitated riding and hunting areas, improved staging areas, supplied agricultural organizations with essential OHV safety education, built bridges over fish-bearing streams, and partnered with local outdoor enthusiast communities across the country to improve access to public lands. Each quarter, Yamaha accepts applications from nonprofit or tax-exempt organizations including OHV riding clubs and associations, national, state, and local public land-use agencies, outdoor enthusiast associations, and land conservation groups with an interest in protecting, improving, expanding, and/or maintaining access for safe, responsible, and sustainable public use.

Updated guidelines, application form, information, and news about the Outdoor Access Initiative are available at YamahaOAI.com. For specific questions about the Yamaha Outdoor Access Initiative, call the dedicated hotline at 1-877-OHV-TRAIL (877-648-8724), email [email protected], or write to:

Yamaha Outdoor Access Initiative
Yamaha Motor Corp., USA
3065 Chastain Meadows Parkway, Bldg. 100
Marietta, GA 30066
About Yamaha Motor Corporation, USA
Yamaha Motor Corporation, USA (YMUS), is a recognized leader in the outdoor recreation industry. The company’s ever-expanding product offerings include Motorcycles and Scooters, ATV and Side-by-Side vehicles, Snowmobiles, WaveRunner Personal Watercraft, Boats, Outboard Motors, Outdoor Power Equipment, Power Assist Bicycles, Golf Cars, Power Assist Wheelchair Systems, Surface Mount Technology (SMT) and Robotic Machines, Unmanned Helicopters, Accessories, Apparel, Yamalube products, and much more. YMUS products are sold through a nationwide network of distributors and dealers in the United States.

YMUS has a corporate office in California, two corporate offices in Georgia, facilities in Wisconsin and Alabama, and factory operations in Tennessee and Georgia. Additional U.S.-based subsidiaries include Yamaha Marine Systems Company (YMSC) with divisions Bennett Marine (Florida), Kracor Systems (Wisconsin) and Siren Marine, Inc. (Rhode Island), Skeeter Boats (Texas), with division G3 Boats (Missouri), and Yamaha Precision Propeller (Indiana).

Connect with Yamaha on social media via @YamahaOutdoors or search any of the following hashtags on all platforms: #Yamaha #YamahaOAI #REALizeYourAdventure #ProvenOffRoad #AssembledInUSA

Royal Enfield Launches 2023 Scram 411 Adventure Tourer/Scrambler

Royal Enfield Welcomes SCRAM 411 to North America

Adventure tourer meets street scrambler with the fun and versatile all-new

2023 Royal Enfield Scram 411

Milwaukee, WI – Royal Enfield, the global leader in midsize motorcycles (250-750cc), is proud to welcome the all-new 2023 Scram 411 to North America. Adventure-touring meets the accessibility and playfulness of a classic scrambler with Royal Enfield’s first ADV crossover. Based on the globally popular Himalayan motorcycle, the Scram 411 brings a modern, urban twist to this proven platform, while maintaining its adventure DNA. The Scram 411 is an engaging, accessible and capable street scrambler, ideal for city riding, but its competent rough-roading capabilities mean the fun doesn’t stop when the pavement ends.

 

From the city scape to a rural escape, the Royal Enfield Scram 411 can take you there. Photo courtesy Royal Enfield North America.
From the city scape to a rural escape, the Royal Enfield Scram 411 can take you there. Photo courtesy Royal Enfield North America.

 

Built upon Royal Enfield’s venerable 411cc single-cylinder engine platform and the Harris Performance-developed chassis, the Scram 411 combines spirited agility on the street with the capability to tackle rugged roads. A 19-inch front wheel and streamlined styling characterize the appearance of the all-new Scram 411 motorcycle, which delivers a lighter, nimbler, and more street-smart package tuned for urban life.

 

With a 19-inch front wheel, one-piece seat and distinctive styling, the Scram 411 (pictured here in White Flame) is the latest addition to Royal Enfield's North American family. Photo courtesy Royal Enfield North America.
With a 19-inch front wheel, one-piece seat and distinctive styling, the Scram 411 (pictured here in White Flame) is the latest addition to Royal Enfield’s North American family. Photo courtesy Royal Enfield North America.

 

The front wheel and one-piece seat lend to distinct ergonomics of the Scram 411, delivering a comfortable, neutral riding position with an easy reach to the ground. The Scram 411 sheds the distinctive engine guards, windshield, center stand and rear rack of its adventure-touring counterpart, leaving a delightfully agile, freshly styled ADV crossover motorcycle. The new geometry livens up handing for a responsive ride on the street, while long-travel suspension, provided by the 41mm fork and link-mounted shock, maintain class-leading ground clearance and well-rounded capability.

 

Royal Enfield Scram 411 in Silver Spirit, featuring an assortment of Genuine Motorcycle Accessories also available from Royal Enfield. Photo courtesy Royal Enfield North America.
Royal Enfield Scram 411 in Silver Spirit, featuring an assortment of Genuine Motorcycle Accessories also available from Royal Enfield. Photo courtesy Royal Enfield North America.

 

Mark Wells, Chief of Design at Royal Enfield, loves how easily the Scram 411 can navigate a wide spectrum of terrain and challenges. Speaking about creating a new subspecies of motorcycles, he said, “Most scrambler motorcycles focus only on aesthetics and looks. When we began work on the Scram 411, we were determined to create a motorcycle that would be distinct in design and purpose, and bring the best of rough-road capability to urban riding. With its distinctive look and design, playful colorways, accessible riding proposition, the Scram 411 is an ultimate ADV crossover for the urban environment.”

With the global goal of offering a fresh, multipurpose motorcycle for modern urban markets from London, New Delhi and Tokyo, the Scram 411 brings its own potential to the North American market. Whether it’s winding back roads, exploring the countryside or cruising beach towns, the Scram 411 will welcome new riders as well as delight experienced motorcyclists with its versatile performance and accessible nature, both in price and size.

 

Royal Enfield Scram 411 in Graphite Yellow. Photo courtesy Royal Enfield North America.
Royal Enfield Scram 411 in Graphite Yellow. Photo courtesy Royal Enfield North America.

 

The Scram 411 will be available in seven distinctive colorways, and will arrive at North American Royal Enfield dealerships as early as September 2022. The first 1000 units in North America will feature the Royal Enfield Tripper Navigation, a simple and intuitive turn-by-turn navigation pod that pairs with your smartphone via the Royal Enfield App. Royal Enfield will also offer an all-new Scram 411 Collection of apparel and Genuine Motorcycle Accessories.

The 2023 Royal Enfield Scram 411 will retail for $5,099 USD, $6,749 CAD.

#readysetscram #scram411 #royalenfield

About Royal Enfield

The oldest motorcycle company in continuous production in the world, Royal Enfield made its first motorcycle in 1901. A division of Eicher Motors Limited, Royal Enfield has created the midsize motorcycle segment in India with its unique and distinctive modern classic motorcycles. With its manufacturing base in Chennai, India, Royal Enfield has been able to grow its production rapidly against a surge in demand for its motorcycles. Royal Enfield is a leading player in the global middleweight motorcycle market.

Royal Enfield North America (RENA) is headquartered in Milwaukee, Wisconsin, and is developing a growing network of more than 150 dealers in North America, including the contiguous U.S. and Canada. RENA currently offers the all-new Scram 411, Classic 350, Meteor 350, Himalayan and the 650 Twins (INT650 and Continental GT 650) motorcycles, along with a range of Genuine Motorcycle Accessories and apparel.

For more information on Royal Enfield North America, visit www.RoyalEnfield.com/us/en/, www.Instagram.com/RoyalEnfield_NA, www.Facebook.com/RoyalEnfieldNorthAmerica.

California Roadrace Association: Prince Wins Again At Buttonwillow

California Roadrace Association 2022 Round 4 at Buttonwillow Raceway Park:  Bryce Prince and Jasmine Nichols Bring the HEAT!

(Buttonwillow, CA) – California Roadrace Association (CRA) hosted their fourth and final round of the year at Buttonwillow Raceway Park on August 20-21. The event was sponsored by Dunlop Motorcycle Tires & Racers Edge Performance. The club ran the less common and somewhat more challenging Configuration 26 – a counter-clockwise layout that skips the ‘Phil Hill’ section making for an extremely long straightaway. Adding to the excitement, many of the year’s class championships were not decided until this final round of the 2022 Season.

“Configuration 26 CCW makes for a very fast, fun, and challenging race weekend. Running CCW really brings some challenges with a lot of decreasing radius corners, but we love being able to top out sixth gear on the drag strip. If you have not ridden this configuration you are really missing out!” said Bryce Prince, racer and 2022 #1 plate holder.

Racing action started off with Jack Bakken, on his Wawa Racing BMW S 1000 RR, taking the win in the 18-lap 61DTC 1000GT race. He was followed in second place by BPR Yamaha YZF-R1 mounted Ben Hodges and Steve Zoumaras aboard his Kawasaki ZX-10R in third.

Prince showed up on his BPR Tuning Yamaha R1 and continued to dominate each class he entered. He took first in the RIDERZLAW Gold Cup over Bakken on his Wawa Racing BMW S 1000 RR. Prince continued his victory streak by taking P1 in the TrackDaz Expert 1000 Superbike, with a blistering pace and best lap time of 1:44.187 over Bakken, on his Wawa Racing BMW S 1000 RR. Prince completed the perfect weekend with a first in CTML Consultants Expert 1000 Supersport over his teammate Hodges, who was also on a BPR Yamaha YZF-R1.

The 600 races found Zach Harrington on his BPR Yamaha YZF-R6 lapping in the consistent low 1:50 range, splitting wins with standout rookie expert Declan Van Rosmalen on his Yamaha YZF-R6. Van Rosmalen took the wins in 61DTC 600GT and Blud Lubricants Expert 600 Supersport, while Harrington took the win in Carters@theTrack 600 Superbike.

Jasmine Nichols and Jesse Sims put on a great show this weekend. They raced in almost every class their Ninja 400s were legal to enter and battled start to finish in many of them. Nichols won the 16-lap Feel Like a Pro 400GT race on Saturday and then took wins in Feel Like a Pro 400 Superbike and Supersport sprint races on Sunday. Sims took the win in both Bellissimoto Twins Grand Prix and Bellissimoto Battle of the Twins race.

Jasmine Nichols (825) and Jesse Sims (813) went head-to-head all weekend. Photo by CaliPhotography.com, courtesy CRA.
Jasmine Nichols (825) and Jesse Sims (813) went head-to-head all weekend. Photo by CaliPhotography.com, courtesy CRA.

The American Iron (presented by Foster’s Freeze, Sanger CA) and the Ladies of CRA (Presented by Let’s Ride Track Days) are two of the races that proved to be the most fun to spectate all year round.  Participation in both race classes continues to grow and the fun level the racers bring is unparalleled.

“I fly all the way from Texas to race with the California Roadrace Association for good reason. This club is efficient, well organized, and very rider focused. The commitment to rewarding the hard work of each racer and rider that finishes on the podium with amazing trophies, winner circle ceremonies, and monetary payouts. The paddock is a fun, family style environment and the competition level is fierce. I cannot wait for the 2023 season!” said racer Brandie Cox.

Amateur racers showed up in full force all season and proved that racing is well and alive in Southern California. A perfect example is Sean Williams on his Yamaha YZF-R1 and Miguel Romero on his Ducati 1199 going at it in both Mullico Amateur 1000 Superbike and FitAid Amateur 1000 Supersport classes, with Williams taking the win over Romero in both.

For more information on CRA, visit their website at www.race-cra.com. Get licensed and let’s go racing.

#areyoucra #racecra #iamcra

CRA would like to thank their sponsors for their support:

Dunlop Motorcycle Tires, Racers Edge Performance, RiderzLaw, Feel Like A Pro, CTML Consultants, Motorsport Exotica, VnM Sport, TrackDaz, Let’s Ride Track Days, Carters@theTrack, Fun Track Dayz, Pirelli, 61 DTC, CT Racing, Blood x Sweat x Tears Vodka, Fosters Freeze (Sanger, CA), Blud Lubricants, Catalyst Reaction Tuning,  Bellissimoto, AZAD Wheels, Action Sports Canopies, Boxo USA, Capit Performance, ASV, KYT Helmets, Thermal Technology, Mullico, LIFEAID/FITAID, Suspension Matters, Lieto Factory, CinePixel Productions, The Heights Restaurant & Bar, Cha Cha Cha Motorsports, Maria Cid Insurance Agency, 844-MY-MOTOW.

MotoGP: Marc Marquez Cleared To Start Riding Again

Marc Marquez cleared for further training

Following his latest medical check, Marc Marquez has been given the green light to intensify his training and assess the condition of his arm on a motorcycle.

Marc Marquez has completed another successful medical check at the Ruber Internacional Hospital in Madrid. His trusted medical team, consisting of Dr. Joaquin Sánchez Sotelo, Dr. Samuel Antuña and Dr. Angel Cotorro were all pleased with the healing and recovery of the right humerus.

The medical team have given Marquez approval to intensify his training, adding more weight and introducing more varied exercises into his routine. Alongside this, it has also been agreed for the eight-time World Champion to start training on motorcycles to understand the condition of his right arm with further context.

From the findings of this outing, Marquez and the Repsol Honda Team will assess the following steps needed.
Dr. Sanchez Sotelo

MD PhD, Chair of the Division of Shoulder and Elbow Surgery, Mayo Clinic.

“Today, I had the opportunity to evaluate Marc Marquez in regard to his surgical procedure recently performed at Mayo Clinic. Fortunately, Marc Marquez has regained a great arc of motion and has recovered well from a muscular perspective as well. Today, he underwent radiographs and a CT scan that show complete bone union.”

WorldSBK: Redding’s Passion For Two-Wheels Goes Beyond Motorcycles

Passion for two wheels: Scott Redding and the perfect combination of Superbike and cycling.

BMW Motorrad factory rider Scott Redding enters cycling races and runs his own cycling team.

Fitness, mental strength and racing skills – ideal training for the demands of the FIM Superbike World Championship.

BMW assists Scott Redding’s cycling team by providing a support car.

Documentary on Scott Redding, by the Global Cycling Network, on YouTube.
 

Munich. SRCT – short for Scott Redding Cycling Team. BMW Motorrad factory rider Scott Redding (GBR) lives out his passion for two wheels with a 999cc engine on his BMW M 1000 RR and with the power of his own two legs on his racing bike. The Brit not only has his own professional racing team, SCRT Muc-Off, but also regularly takes part in cycle races in England when time permits. For Redding, this is the perfect preparation for the demands of the FIM Superbike World Championship (WorldSBK).

Cycle racing is ideal to work on one’s physical fitness – and, as Redding is keen to emphasize, it also helps to control one’s weight: “I do a lot of cycling to keep my weight down. I weigh three kilograms less now than at the start of the season. That is all down to the fact that I have been cycling and burned more calories than I ingested. Generally speaking, it is good for my health and I enjoy it.”

However, this is just one positive effect. As well as helping his fitness, cycle racing also gives Redding a lot of mental strength for his WorldSBK races. “When I am cycling, I push myself to the limit,” he said. “When I now go racing and am struggling with the bike, the tyre is skidding and I am starting to get tired, then I know that I have a lot more still to give. In the cycle races, I put in so much effort that I hardly have any energy left at all. You don’t actually reach that level of exhaustion in motorcycle racing so I now always know that my energy levels are high enough to complete the race and battle right through to the finish.”

There are many similarities between cycling and motorcycle races so cycle races are perfect preparation when it comes to racing skills. Redding agrees: “In Superbikes, you have to think about saving the tyres. In a cycle race, I have to think about saving my legs. You also need some race craft to overtake. So, in my opinion, it is very similar.”

Redding always has his racing bike with him – even at WorldSBK race events it can always be found in his truck. When it comes to the final preparations for the race weekend, he takes his bike out with him for the Track Walk: “It allows me to identify bumps, what lines are available, what the asphalt is like, for example whether there are different types of asphalt, and whether I may need to take a different line to avoid a few bumps on the track.” He then benefits from this information when he heads out on the BMW M 1000 RR.

At the WorldSBK meeting at Donington Park (GBR), Redding, his SRCT Muc-Off team and the team support car provided by BMW all took to the track together. They were accompanied by Global Cycling Network, the world’s largest online cycle racing channel. They were there to make a documentary highlighting the parallels between cycle racing and motorcycle racing in which Redding goes into detail about his fascination for the sport.

The video is available below:

 

Racer Moham To Be Inducted Into Colorado Motorsports Hall Of Fame

Shannon Moham To Be Inducted Into Colorado Motorsports Hall Of Fame

The Colorado Motorsports Hall of Fame has announced that Shannon Moham is one of the eleven inductees to be honored during the 2022 Colorado Motorsports Hall of Fame Induction Ceremony.

With over 100 championships, 435 race wins and 33 class track records in the Rocky Mountain Region with the MRA and USBA, Moham will be inducted along with Michael Lippencott, Roger “Cappy” Mason, Dick Baty, Don “Spyder” Anderson, George Willett, Jack Graham, Jeff Winter, Kent Moore, Larramie Duncan, Lee Stark and Mike Starnes.

Moham will join previous motorcycle racing inductees Ricky Orlando, Korry Hogan, Davey Durrelle, Donnie Hough and Bruce Sass.

Hall of Fame Inductees come from all facets of motorsports: Drivers, builders, mechanics, owners, facility operators and non-profit organizations. And, whether they come from being involved with racing on land, air or water, they all have the same pedigree: a passion for speed, competition and perfection.

The Induction ceremonies will be at the Infinity Park Event Center in Glendale, Colorado, on October 14, 2022 at 5:00pm MST. Tickets for the 2022 Colorado Motorsports Hall of Fame Induction Ceremony are now available at https://coloradomotorsportshalloffame.com/

Tried And Tested: Bilmola Forged-Carbon RC-1 Helmet, Made In Thailand

MotoAmerica Superbike and Stock 1000 racer Travis Wyman (10) has partnered with Bilmola. Photo by Brian J. Nelson.
MotoAmerica Superbike, Stock 1000, and King Of The Baggers racer Travis Wyman (10) has partnered with Bilmola. Photo by Brian J. Nelson.

Copyright 2022, Roadracing World Publishing, Inc.

By Michael Gougis

Where and when there is a need, manufacturing follows. There is a need for helmets in Thailand, a country of 70 million people. According to the Pew Research Center, there are at least 15 million motorcycles in use in the country, or, to put it another way, an incredible 87% of all Thai households own at least one motorcycle. In comparison, only 14% of all U.S. households own a motorcycle.

Bilmola, a Thai company, started producing helmets for other companies in 2010, and has in recent years started to produce products under its own name. In 2020, the company established a U.S. headquarters in California, and early in 2022 introduced its latest high-performance, full-face helmet, the RC-1.

 

The Travis Wyman Replica Bilmola RC-1 is not available for sale in the U.S. until 2023. Here, Wyman is climbing the Stock 1000 podium at Pittsburgh International Race Complex. Photo by Brian J. Nelson.
The Travis Wyman Replica Bilmola RC-1 will not be sold in the U.S. until 2023. Here, Wyman is climbing the Stock 1000 podium at Pittsburgh International Race Complex. Photo by Brian J. Nelson.

 

The helmet completely looks the part of a high-tech, cutting-edge protective device. The forged composite shell shows off its structural materials, with the helmet finished in a clear coat and the composites on clear display. The styling is angular, sharp and modern.

After several hundreds of miles wearing this helmet on a variety of motorcycles–sportbike, naked and touring–I can say it is an impressive first effort, although not quite up to the standards of the premium helmets that are in its price range.

Tech Specs

The Bilmola RC-1’s shell is made with a forged composite material and process. Also known as forged carbon, it differs from traditional carbon-fiber in that the pieces of carbon fiber are smaller and are pressed into position in the resin as it cures. The process does away with the labor-intensive manual layup of pre-impregnated sheets of carbon fiber.

According to a paper presented at the American Society of Composites 26th Technical Conference in Montreal in 2011, the process uses high pressures in addition to heat to cure the material. The process comes from the world of the truly high-end–it was developed by the Callaway Golf Company and Lamborghini!

 

The author wearing a Bilmola RC-1 during a recent Yamaha new model press launch. The Bilmola RC-1 helmet's forged composite construction gives it a high-tech, cutting edge look. Photo by Ali Donze/courtesy Yamaha.
The author wearing a Bilmola RC-1 during a recent Yamaha new model press launch. The Bilmola RC-1 helmet’s forged composite construction gives it a high-tech, cutting edge look. Photo by Ali Donze/courtesy Yamaha.

 

Forged composite materials are stronger that traditional carbon-fiber and have smaller variations in strength, and cures in three to five minutes, the paper states. In addition, it can be formed into more complex shapes. In the Lamborghini demonstration vehicle–the Sesto Elemento–the suspension control arms made from forged composite materials were cheaper and quicker to make and 30% lighter than the same part made from forged aluminum. Manufacturing suspension parts from the material took only six minutes from start to finished product, the paper stated.

The RC-1 comes in two shell sizes–medium and small. There are three different expanded polystyrene (EPS) lining sizes, and combined with different sizes of the lining material–a product the company calls Active Air padding–the helmet is available in six sizes from S to XXL.

 

The forged composite construction process allows for a lighter shell than traditional carbon fiber and sharper, more complex shapes. Photo courtesy Bilmola.
The forged composite construction process allows for a lighter shell than traditional carbon fiber and sharper, more complex shapes. Photo courtesy Bilmola.

 

The shell is designed with a spoiler, two intake air vents–one at the chin, another above the visor–and two air extractors. The antibacterial lining is claimed to dry 30 to 50% more quickly than the industry standard. The optical-quality visor is made of an anti-scratch material and features a positive locking mechanism at the bottom and center of the visor. The visors come in dark smoke, light smoke, and clear, and are compatible with Pinlock 70 Maxvision inserts. A traditional dual D-ring system secures the helmet, and an emergency release tab releases the cheek pads with a single pull in case the helmet needs to be removed from an injured rider.

Weight is a claimed 1350 grams, or about 2.97 pounds. Suggested retail price is $523.

Riding Impressions

Picking up the RC-1 confirms the company’s claims on weight–it is very light in the hand. Changing the installed clear shield to the optional dark shield was a snap as well, with the rotational mechanisms clearly visible. On the positive side of the ledger, on my head (I tested the medium size) the helmet felt very light. The visor was indeed crystal-clear, and once secured, it did a very good job of sealing out the wind.

Airflow in the helmet was well controlled, although a bit more ventilation through the chin would have been helpful in the roasting Southern California spring and summer riding season. There was little or no buffeting, and sound levels inside the helmet were relatively low.

And the helmet looks completely badass. It got a lot of compliments from other riders, who thought it cost literally twice its actual price.

 

An Emergency Release system allows EMTs or other medical personnel to remove the cheek pads with a single pull. Photo courtesy Bilmola.
An Emergency Release system allows EMTs or other medical personnel to remove the cheek pads with a single pull. Photo courtesy Bilmola.

 

Negatives were few, and at least one is simply a matter of philosophy. Compared to the other helmets in this price range, the RC-1 felt less refined. While the sound levels were low, the helmet had a hollow sound, compared to the relative hush of higher-end helmets.

The lining handled sweat and perspiration well, but the edge of the EPS lining across the forehead had a sharp edge, compared to the larger-radius edge found on more premium helmets. This led to a hot spot of discomfort, although only after a hundred miles or more on a single ride. And the button release on the visor was a bit small and could be difficult to find with racing gloves on.

And the philosophy part? While the helmet meets ECE R22.05 and DOT certification standards, many if not most other helmets in this price range are Snell Foundation certified. For years, Snell certification has been the gold standard for premium helmets, and buyers in this market–especially for racing purposes–frequently are looking for that final assurance of performance in a crash. One unanswered question is, how does a helmet with a forged carbon-fiber shell perform in a Snell test compared to a helmet with a laminated fiberglass or laminated carbon-fiber shell? Does it absorb more energy and transmit less energy?

Overall, it is a very good first effort, and a helmet that with a bit more refinement could take its place as a product that, if not direct competition for the premium brands in the U.S., at least a viable, lower-cost alternative.

 

Benefit: Buy Dunlop Q5s, Do Track Day, & Help RWAF Buy More Airfence

Josh Herrin (2). Photo by Brian J. Nelson.
Josh Herrin (2). Photo by Brian J. Nelson.

Dunlop and Warhorse HSBK Racing Ducati NYC are supporting the Roadracing World Action Fund with a special deal at a special track day.

Dunlop is donating 100% of the sales of 20 sets of brand-new Sportmax Q5 track day tires for use during the Warhorse HSBK Racing Ducati NYC track day on August 29, 2022, at Pocono Raceway.

In addition to track time, the track day will feature appearances by Warhorse HSBK Racing Ducati NYC rider Josh Herrin and Dunlop tire engineer Anthony “Tony” Romo, who will be on hand to help Dunlop customers.

Riders who have registered for the Warhorse HSBK Racing Ducati NYC track day can purchase one set of the new Q5 tires (either 120/70-17 and 180/60-17 or 120/70-17 and 200/60-17) for $300 per set, and the entire $300 will be donated to the Roadracing World Action Fund.

 

One of Dunlop's new Sportmax Q5 track day tires. Photo courtesy Dunlop.
One of Dunlop’s new Sportmax Q5 track day tires. Photo courtesy Dunlop.

 

The Roadracing World Action Fund is a 501(c)(3) non-profit organization that promotes motorcycle racetrack safety education, helping prevent racetrack injuries by encouraging, facilitating, and funding the deployment of life-saving soft barriers at motorcycle road races and track days nationwide.

The Dunlop Q5 tires can be purchased (and must be mounted to wheels) at Warhorse HSBK Racing 1000 Dunham Dr., Dunmore, PA 18512 (570-346-2453) starting on Friday, August 26 or they can be purchased trackside (without mandatory mounting) at Pocono Raceway on August 29.

Either way the purchaser must prove that they are registered for the track day.

Only 10 sets of each size pairing will be available through this special deal.

In addition to helping support the work of the Roadracing World Action Fund and being one of the first riders in North America to try out Dunlop’s new Q5, participants in the track day will also get a $100 coupon from Dunlop good toward a future tire purchase at any participating Dunlop dealer.

To learn more about Dunlop motorcycle tires or to find a local authorized Dunlop motorcycle tire dealer, go to: https://www.dunlopmotorcycletires.com/

To sign up for or to get more information about the Warhorse HSBK Racing Ducati NYC track day August 29 at Pocono Raceway, go to: https://www.ducatinyc.com/–xpss?fbclid=IwAR1b51olalp0Tyq1hczUr0gmDIpSdVpRhHDa5a1jw3Ov7YcBDoiw9vPJfxw#/products/view/47

To make a tax-deductible donation or to learn more about the Roadracing World Action Fund, go to: https://www.roadracingworld.com/actionfund/

Intro: 2022 Energica Experia Green Tourer, In The August Issue

The Experia is at home on the twisty roads of the Dolomite mountains. Upright seating and wider bars improve comfort and flickability.  
The Experia is at home on the twisty roads of the Dolomite mountains. Upright seating and wider bars improve comfort and flickability.  

Featured In the August 2022 issue of Roadracing World:

        Green barely begins to describe the scenery in the Dolomite mountains of Italy in summertime. It is achingly beautiful mountainsides, lush with grass and tall evergreen trees, and vast swaths of verdant landscape bisected by ski lift cables that run everywhere. 

       In the winter, when all of this is buried under a thick, white blanket of snow, skiers from around the world converge here, testing themselves against the slopes that have produced World Champions and immersing themselves in the skiing community and lifestyle.

        Even in the summer, the air is crisp, and it has even more than the smell of the trees and pastures. It has a taste that can be described only as clean. 

        It seemed appropriate for Energica, perhaps the world’s most well-known fully electric motorcycle manufacturer, to invite journalists from around the world to this beautiful place to introduce its latest offering…

—Energica’s Big Bet, by Michael Gougis   

Energica has taken the lessons learned in GP-level racing and applied them to its newest machine—the Experia Green Tourer. See what one of the world’s leading electric motorcycle manufacturers has done to push the boundaries of electric motorcycling in the latest issue of Roadracing World!

PREVIEW  the August 2022 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats.

SUBSCRIBE NOW ! Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday.

Read the August 2022 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world

—

MotoAmerica: Gagne Doing WorldSBK Testing At Buttonwillow

Jake Gagne with crew members Walker Jemison (right) and Mike Canfield (left) at Pittsburgh International Race Complex. Photo by Brian J. Nelson.
Jake Gagne with crew members Walker Jemison (right) and Mike Canfield (left) at Pittsburgh International Race Complex. Photo by Brian J. Nelson.

Jake Gagne, the defending MotoAmerica Superbike Champion and the current MotoAmerica Championship point leader, is testing this week at Buttonwillow Raceway Park, in preparation for his World Superbike wild card appearance in Portugal later this season.

A few weeks ago, Yamaha announced that after the conclusion of the 2022 MotoAmerica Medallia Superbike Championship at Barber Motorsports Park in September, Gagne and his crew will crate up one of his Fresh N Lean Progressive Yamaha YZF-R1 Superbikes and head over to Europe to participate as a wild card in the FIM Superbike World Championship round October 7-9 at Algarve International Circuit, in Portimao, Portugal.

While the YZF-R1s ridden by Pata Yamaha’s Toprak Razgatlioglu and Andrea Locatelli in World Superbike are very similar to the machine Gagne races in MotoAmerica Superbike, there are some significant differences.

For starters, MotoAmerica races on Dunlop control tires and World Superbike races on Pirelli control tires. And the difference between the two series’ fuel regulations require some minor changes in the engine build and tuning. And finally, World Superbikes are allowed to use an alternate set of internal gear ratios with a neutral lockout.

With all of this in mind, the Fresh N Lean Progressive Yamaha team returned from this past weekend’s MotoAmerica event at Pittsburgh International Race Complex to their base in Huntington Beach, California, on Monday, built Gagne a World Superbike-spec engine and transmission on Tuesday, and started testing at Buttonwillow on Wednesday and Thursday.

The goal is to allow Gagne to learn the differences in the WorldSBK-spec machine and to reacclimate himself to Pirelli tires, which he used when racing for the factory Red Bull Honda team in the 2018 Superbike World Championship. That season, Gagne earned four top-10 finishes while only failing to finish races twice.

According to messages from Fresh N Lean Progressive Yamaha Team Owner Richard Stanboli today, they are learning a lot so far at the test, but things are complicated by the fact that the ambient temperature at Buttonwillow on Wednesday was about 106˚ F (41˚ C) and the track temperature was 140˚ F (60 C). Conditions are expected to be the same today.

In 2021, the ambient temperatures at Algarve ranged from 79˚ F (26˚ C) during Race One to 72˚ F (22˚ C) during Race Two, and the track temperatures ranged from 113˚ F (45˚ C) during Race One to 106˚ F (41˚ C) in Race Two.

Yamaha Continuing To Support All Kids Bike Program

Kindergarten students taking part in the All Kids Bike program with Strider balance bikes. Photo courtesy Yamaha Motor Corp., U.S.A.
Kindergarten students taking part in the All Kids Bike program with Strider balance bikes. Photo courtesy Yamaha Motor Corp., U.S.A.
Yamaha Continues Investing in the Future for Outdoor Enthusiasts
New Yamaha Grants Aid Public Land Managers, Recreationalists, and Thousands of Kids Nationwide

 

MARIETTA, Ga. – August 25, 2022 – Yamaha Motor Corp., USA, today announces the Yamaha Outdoor Access Initiative (OAI) grant awards totaling $145,175 for the second quarter of 2022 in support of its ongoing mission to protect, improve, and expand access to public land for motorized and outdoor recreation. This quarter, Yamaha OAI resources were deployed to help national efforts, as well as specific projects directly impacting the future of motorized recreation. Projects being funded in the second quarter grant cycle include:

  • Developing a database of public land trades to help generate public awareness and involvement in protecting access for recreation.
  • Conducting a workshop educating land managers on sustainable trail building and maintenance to protect the safety of riders and the future of access on public lands.
  • Significant trail rehabilitation and rerouting efforts to improve off-road experiences while protecting sensitive environments.
  • Introducing kindergarteners to biking.

“We continue to prioritize projects offering innovative and sustainable solutions to the problems facing access to land for motorized and outdoor recreation. This quarter’s applicants delivered in many impactful ways and we are excited to continue being involved in making real progress on the ground,” said Steve Nessl, Yamaha’s Motorsports marketing manager. “We are additionally pleased to continue our partnership with The Nature Conservancy in Tennessee in support of their efforts to build 150 miles of legal motorized trails on the Northumberland Plateau.”

The second quarter grants for 2022 have been awarded to six applicants:

  • Colorado Wild Public Lands — Basalt, CO
  • Indian Creek Valley ATV Club – Indian Head, PA
  • Limestone Trail Hawks — Aroostook County, ME
  • National Off-Highway Vehicle Conservation Council
  • All Kids Bike
  • The Nature Conservancy – Tennessee Chapter

The application deadline for consideration in the third quarter of this year’s funding cycle is September 30, 2022, and riding clubs, land stewardship associations, and public land managers are encouraged to work together with Yamaha dealers to identify projects and apply for support. To aid those considering applying for a Yamaha OAI grant, visit YamahaOAI.com for submission guidelines, an application, answers to most popular questions about the program, and recaps of some typical projects.

About the Yamaha Outdoor Access Initiative

Since 2008, the Yamaha Outdoor Access Initiative has led the Powersports industry in supporting responsible access to our nation’s public lands for outdoor enthusiasts. With more than $5 million contributed to 400 projects across the country, Yamaha has directly and indirectly supported thousands of miles of motorized recreation trails, maintained and rehabilitated riding and hunting areas, improved staging areas, supplied agricultural organizations with essential OHV safety education, built bridges over fish-bearing streams, and partnered with local outdoor enthusiast communities across the country to improve access to public lands. Each quarter, Yamaha accepts applications from nonprofit or tax-exempt organizations including OHV riding clubs and associations, national, state, and local public land-use agencies, outdoor enthusiast associations, and land conservation groups with an interest in protecting, improving, expanding, and/or maintaining access for safe, responsible, and sustainable public use.

Updated guidelines, application form, information, and news about the Outdoor Access Initiative are available at YamahaOAI.com. For specific questions about the Yamaha Outdoor Access Initiative, call the dedicated hotline at 1-877-OHV-TRAIL (877-648-8724), email [email protected], or write to:

Yamaha Outdoor Access Initiative
Yamaha Motor Corp., USA
3065 Chastain Meadows Parkway, Bldg. 100
Marietta, GA 30066
About Yamaha Motor Corporation, USA
Yamaha Motor Corporation, USA (YMUS), is a recognized leader in the outdoor recreation industry. The company’s ever-expanding product offerings include Motorcycles and Scooters, ATV and Side-by-Side vehicles, Snowmobiles, WaveRunner Personal Watercraft, Boats, Outboard Motors, Outdoor Power Equipment, Power Assist Bicycles, Golf Cars, Power Assist Wheelchair Systems, Surface Mount Technology (SMT) and Robotic Machines, Unmanned Helicopters, Accessories, Apparel, Yamalube products, and much more. YMUS products are sold through a nationwide network of distributors and dealers in the United States.

YMUS has a corporate office in California, two corporate offices in Georgia, facilities in Wisconsin and Alabama, and factory operations in Tennessee and Georgia. Additional U.S.-based subsidiaries include Yamaha Marine Systems Company (YMSC) with divisions Bennett Marine (Florida), Kracor Systems (Wisconsin) and Siren Marine, Inc. (Rhode Island), Skeeter Boats (Texas), with division G3 Boats (Missouri), and Yamaha Precision Propeller (Indiana).

Connect with Yamaha on social media via @YamahaOutdoors or search any of the following hashtags on all platforms: #Yamaha #YamahaOAI #REALizeYourAdventure #ProvenOffRoad #AssembledInUSA

Royal Enfield Launches 2023 Scram 411 Adventure Tourer/Scrambler

A 2023 Royal Enfield Scram 411 in Blazing Black. Look for it in seven distinctive colorways. Photo courtesy Royal Enfield North America.
A 2023 Royal Enfield Scram 411 in Blazing Black. Look for it in seven distinctive colorways. Photo courtesy Royal Enfield North America.

Royal Enfield Welcomes SCRAM 411 to North America

Adventure tourer meets street scrambler with the fun and versatile all-new

2023 Royal Enfield Scram 411

Milwaukee, WI – Royal Enfield, the global leader in midsize motorcycles (250-750cc), is proud to welcome the all-new 2023 Scram 411 to North America. Adventure-touring meets the accessibility and playfulness of a classic scrambler with Royal Enfield’s first ADV crossover. Based on the globally popular Himalayan motorcycle, the Scram 411 brings a modern, urban twist to this proven platform, while maintaining its adventure DNA. The Scram 411 is an engaging, accessible and capable street scrambler, ideal for city riding, but its competent rough-roading capabilities mean the fun doesn’t stop when the pavement ends.

 

From the city scape to a rural escape, the Royal Enfield Scram 411 can take you there. Photo courtesy Royal Enfield North America.
From the city scape to a rural escape, the Royal Enfield Scram 411 can take you there. Photo courtesy Royal Enfield North America.

 

Built upon Royal Enfield’s venerable 411cc single-cylinder engine platform and the Harris Performance-developed chassis, the Scram 411 combines spirited agility on the street with the capability to tackle rugged roads. A 19-inch front wheel and streamlined styling characterize the appearance of the all-new Scram 411 motorcycle, which delivers a lighter, nimbler, and more street-smart package tuned for urban life.

 

With a 19-inch front wheel, one-piece seat and distinctive styling, the Scram 411 (pictured here in White Flame) is the latest addition to Royal Enfield's North American family. Photo courtesy Royal Enfield North America.
With a 19-inch front wheel, one-piece seat and distinctive styling, the Scram 411 (pictured here in White Flame) is the latest addition to Royal Enfield’s North American family. Photo courtesy Royal Enfield North America.

 

The front wheel and one-piece seat lend to distinct ergonomics of the Scram 411, delivering a comfortable, neutral riding position with an easy reach to the ground. The Scram 411 sheds the distinctive engine guards, windshield, center stand and rear rack of its adventure-touring counterpart, leaving a delightfully agile, freshly styled ADV crossover motorcycle. The new geometry livens up handing for a responsive ride on the street, while long-travel suspension, provided by the 41mm fork and link-mounted shock, maintain class-leading ground clearance and well-rounded capability.

 

Royal Enfield Scram 411 in Silver Spirit, featuring an assortment of Genuine Motorcycle Accessories also available from Royal Enfield. Photo courtesy Royal Enfield North America.
Royal Enfield Scram 411 in Silver Spirit, featuring an assortment of Genuine Motorcycle Accessories also available from Royal Enfield. Photo courtesy Royal Enfield North America.

 

Mark Wells, Chief of Design at Royal Enfield, loves how easily the Scram 411 can navigate a wide spectrum of terrain and challenges. Speaking about creating a new subspecies of motorcycles, he said, “Most scrambler motorcycles focus only on aesthetics and looks. When we began work on the Scram 411, we were determined to create a motorcycle that would be distinct in design and purpose, and bring the best of rough-road capability to urban riding. With its distinctive look and design, playful colorways, accessible riding proposition, the Scram 411 is an ultimate ADV crossover for the urban environment.”

With the global goal of offering a fresh, multipurpose motorcycle for modern urban markets from London, New Delhi and Tokyo, the Scram 411 brings its own potential to the North American market. Whether it’s winding back roads, exploring the countryside or cruising beach towns, the Scram 411 will welcome new riders as well as delight experienced motorcyclists with its versatile performance and accessible nature, both in price and size.

 

Royal Enfield Scram 411 in Graphite Yellow. Photo courtesy Royal Enfield North America.
Royal Enfield Scram 411 in Graphite Yellow. Photo courtesy Royal Enfield North America.

 

The Scram 411 will be available in seven distinctive colorways, and will arrive at North American Royal Enfield dealerships as early as September 2022. The first 1000 units in North America will feature the Royal Enfield Tripper Navigation, a simple and intuitive turn-by-turn navigation pod that pairs with your smartphone via the Royal Enfield App. Royal Enfield will also offer an all-new Scram 411 Collection of apparel and Genuine Motorcycle Accessories.

The 2023 Royal Enfield Scram 411 will retail for $5,099 USD, $6,749 CAD.

#readysetscram #scram411 #royalenfield

About Royal Enfield

The oldest motorcycle company in continuous production in the world, Royal Enfield made its first motorcycle in 1901. A division of Eicher Motors Limited, Royal Enfield has created the midsize motorcycle segment in India with its unique and distinctive modern classic motorcycles. With its manufacturing base in Chennai, India, Royal Enfield has been able to grow its production rapidly against a surge in demand for its motorcycles. Royal Enfield is a leading player in the global middleweight motorcycle market.

Royal Enfield North America (RENA) is headquartered in Milwaukee, Wisconsin, and is developing a growing network of more than 150 dealers in North America, including the contiguous U.S. and Canada. RENA currently offers the all-new Scram 411, Classic 350, Meteor 350, Himalayan and the 650 Twins (INT650 and Continental GT 650) motorcycles, along with a range of Genuine Motorcycle Accessories and apparel.

For more information on Royal Enfield North America, visit www.RoyalEnfield.com/us/en/, www.Instagram.com/RoyalEnfield_NA, www.Facebook.com/RoyalEnfieldNorthAmerica.

California Roadrace Association: Prince Wins Again At Buttonwillow

Bryce Prince (74) and Jack Bakken (29) battle for the lead in the CRA RiderzLaw Gold Cup race at Buttonwillow Raceway Park. Photo by CaliPhotography.com, courtesy CRA.
Bryce Prince (74) and Jack Bakken (29) battle for the lead in the CRA RiderzLaw Gold Cup race at Buttonwillow Raceway Park. Photo by CaliPhotography.com, courtesy CRA.

California Roadrace Association 2022 Round 4 at Buttonwillow Raceway Park:  Bryce Prince and Jasmine Nichols Bring the HEAT!

(Buttonwillow, CA) – California Roadrace Association (CRA) hosted their fourth and final round of the year at Buttonwillow Raceway Park on August 20-21. The event was sponsored by Dunlop Motorcycle Tires & Racers Edge Performance. The club ran the less common and somewhat more challenging Configuration 26 – a counter-clockwise layout that skips the ‘Phil Hill’ section making for an extremely long straightaway. Adding to the excitement, many of the year’s class championships were not decided until this final round of the 2022 Season.

“Configuration 26 CCW makes for a very fast, fun, and challenging race weekend. Running CCW really brings some challenges with a lot of decreasing radius corners, but we love being able to top out sixth gear on the drag strip. If you have not ridden this configuration you are really missing out!” said Bryce Prince, racer and 2022 #1 plate holder.

Racing action started off with Jack Bakken, on his Wawa Racing BMW S 1000 RR, taking the win in the 18-lap 61DTC 1000GT race. He was followed in second place by BPR Yamaha YZF-R1 mounted Ben Hodges and Steve Zoumaras aboard his Kawasaki ZX-10R in third.

Prince showed up on his BPR Tuning Yamaha R1 and continued to dominate each class he entered. He took first in the RIDERZLAW Gold Cup over Bakken on his Wawa Racing BMW S 1000 RR. Prince continued his victory streak by taking P1 in the TrackDaz Expert 1000 Superbike, with a blistering pace and best lap time of 1:44.187 over Bakken, on his Wawa Racing BMW S 1000 RR. Prince completed the perfect weekend with a first in CTML Consultants Expert 1000 Supersport over his teammate Hodges, who was also on a BPR Yamaha YZF-R1.

The 600 races found Zach Harrington on his BPR Yamaha YZF-R6 lapping in the consistent low 1:50 range, splitting wins with standout rookie expert Declan Van Rosmalen on his Yamaha YZF-R6. Van Rosmalen took the wins in 61DTC 600GT and Blud Lubricants Expert 600 Supersport, while Harrington took the win in Carters@theTrack 600 Superbike.

Jasmine Nichols and Jesse Sims put on a great show this weekend. They raced in almost every class their Ninja 400s were legal to enter and battled start to finish in many of them. Nichols won the 16-lap Feel Like a Pro 400GT race on Saturday and then took wins in Feel Like a Pro 400 Superbike and Supersport sprint races on Sunday. Sims took the win in both Bellissimoto Twins Grand Prix and Bellissimoto Battle of the Twins race.

Jasmine Nichols (825) and Jesse Sims (813) went head-to-head all weekend. Photo by CaliPhotography.com, courtesy CRA.
Jasmine Nichols (825) and Jesse Sims (813) went head-to-head all weekend. Photo by CaliPhotography.com, courtesy CRA.

The American Iron (presented by Foster’s Freeze, Sanger CA) and the Ladies of CRA (Presented by Let’s Ride Track Days) are two of the races that proved to be the most fun to spectate all year round.  Participation in both race classes continues to grow and the fun level the racers bring is unparalleled.

“I fly all the way from Texas to race with the California Roadrace Association for good reason. This club is efficient, well organized, and very rider focused. The commitment to rewarding the hard work of each racer and rider that finishes on the podium with amazing trophies, winner circle ceremonies, and monetary payouts. The paddock is a fun, family style environment and the competition level is fierce. I cannot wait for the 2023 season!” said racer Brandie Cox.

Amateur racers showed up in full force all season and proved that racing is well and alive in Southern California. A perfect example is Sean Williams on his Yamaha YZF-R1 and Miguel Romero on his Ducati 1199 going at it in both Mullico Amateur 1000 Superbike and FitAid Amateur 1000 Supersport classes, with Williams taking the win over Romero in both.

For more information on CRA, visit their website at www.race-cra.com. Get licensed and let’s go racing.

#areyoucra #racecra #iamcra

CRA would like to thank their sponsors for their support:

Dunlop Motorcycle Tires, Racers Edge Performance, RiderzLaw, Feel Like A Pro, CTML Consultants, Motorsport Exotica, VnM Sport, TrackDaz, Let’s Ride Track Days, Carters@theTrack, Fun Track Dayz, Pirelli, 61 DTC, CT Racing, Blood x Sweat x Tears Vodka, Fosters Freeze (Sanger, CA), Blud Lubricants, Catalyst Reaction Tuning,  Bellissimoto, AZAD Wheels, Action Sports Canopies, Boxo USA, Capit Performance, ASV, KYT Helmets, Thermal Technology, Mullico, LIFEAID/FITAID, Suspension Matters, Lieto Factory, CinePixel Productions, The Heights Restaurant & Bar, Cha Cha Cha Motorsports, Maria Cid Insurance Agency, 844-MY-MOTOW.

MotoGP: Marc Marquez Cleared To Start Riding Again

Marc Marquez (93) in action. Photo by Javi Echevarria, courtesy Repsol Honda.
Marc Marquez (93) training on a motorcross bike in 2020. Photo by Javi Echevarria, courtesy Repsol Honda.

Marc Marquez cleared for further training

Following his latest medical check, Marc Marquez has been given the green light to intensify his training and assess the condition of his arm on a motorcycle.

Marc Marquez has completed another successful medical check at the Ruber Internacional Hospital in Madrid. His trusted medical team, consisting of Dr. Joaquin Sánchez Sotelo, Dr. Samuel Antuña and Dr. Angel Cotorro were all pleased with the healing and recovery of the right humerus.

The medical team have given Marquez approval to intensify his training, adding more weight and introducing more varied exercises into his routine. Alongside this, it has also been agreed for the eight-time World Champion to start training on motorcycles to understand the condition of his right arm with further context.

From the findings of this outing, Marquez and the Repsol Honda Team will assess the following steps needed.
Dr. Sanchez Sotelo

MD PhD, Chair of the Division of Shoulder and Elbow Surgery, Mayo Clinic.

“Today, I had the opportunity to evaluate Marc Marquez in regard to his surgical procedure recently performed at Mayo Clinic. Fortunately, Marc Marquez has regained a great arc of motion and has recovered well from a muscular perspective as well. Today, he underwent radiographs and a CT scan that show complete bone union.”

WorldSBK: Redding’s Passion For Two-Wheels Goes Beyond Motorcycles

Scott Redding in his cycling gear with his BMW Motorrad Motorsport M 1000 RR World Superbike. Photo courtesy BMW Motorrad Motorsport.
Scott Redding in his cycling gear with his BMW Motorrad Motorsport M 1000 RR World Superbike. Photo courtesy BMW Motorrad Motorsport.

Passion for two wheels: Scott Redding and the perfect combination of Superbike and cycling.

BMW Motorrad factory rider Scott Redding enters cycling races and runs his own cycling team.

Fitness, mental strength and racing skills – ideal training for the demands of the FIM Superbike World Championship.

BMW assists Scott Redding’s cycling team by providing a support car.

Documentary on Scott Redding, by the Global Cycling Network, on YouTube.
 

Munich. SRCT – short for Scott Redding Cycling Team. BMW Motorrad factory rider Scott Redding (GBR) lives out his passion for two wheels with a 999cc engine on his BMW M 1000 RR and with the power of his own two legs on his racing bike. The Brit not only has his own professional racing team, SCRT Muc-Off, but also regularly takes part in cycle races in England when time permits. For Redding, this is the perfect preparation for the demands of the FIM Superbike World Championship (WorldSBK).

Cycle racing is ideal to work on one’s physical fitness – and, as Redding is keen to emphasize, it also helps to control one’s weight: “I do a lot of cycling to keep my weight down. I weigh three kilograms less now than at the start of the season. That is all down to the fact that I have been cycling and burned more calories than I ingested. Generally speaking, it is good for my health and I enjoy it.”

However, this is just one positive effect. As well as helping his fitness, cycle racing also gives Redding a lot of mental strength for his WorldSBK races. “When I am cycling, I push myself to the limit,” he said. “When I now go racing and am struggling with the bike, the tyre is skidding and I am starting to get tired, then I know that I have a lot more still to give. In the cycle races, I put in so much effort that I hardly have any energy left at all. You don’t actually reach that level of exhaustion in motorcycle racing so I now always know that my energy levels are high enough to complete the race and battle right through to the finish.”

There are many similarities between cycling and motorcycle races so cycle races are perfect preparation when it comes to racing skills. Redding agrees: “In Superbikes, you have to think about saving the tyres. In a cycle race, I have to think about saving my legs. You also need some race craft to overtake. So, in my opinion, it is very similar.”

Redding always has his racing bike with him – even at WorldSBK race events it can always be found in his truck. When it comes to the final preparations for the race weekend, he takes his bike out with him for the Track Walk: “It allows me to identify bumps, what lines are available, what the asphalt is like, for example whether there are different types of asphalt, and whether I may need to take a different line to avoid a few bumps on the track.” He then benefits from this information when he heads out on the BMW M 1000 RR.

At the WorldSBK meeting at Donington Park (GBR), Redding, his SRCT Muc-Off team and the team support car provided by BMW all took to the track together. They were accompanied by Global Cycling Network, the world’s largest online cycle racing channel. They were there to make a documentary highlighting the parallels between cycle racing and motorcycle racing in which Redding goes into detail about his fascination for the sport.

The video is available below:

 

Racer Moham To Be Inducted Into Colorado Motorsports Hall Of Fame

Shannon Moham (945). Photo by Jim Browning, courtesy Colorado Motorsports Hall of Fame.
Shannon Moham (945). Photo by Jim Browning, courtesy Colorado Motorsports Hall of Fame.

Shannon Moham To Be Inducted Into Colorado Motorsports Hall Of Fame

The Colorado Motorsports Hall of Fame has announced that Shannon Moham is one of the eleven inductees to be honored during the 2022 Colorado Motorsports Hall of Fame Induction Ceremony.

With over 100 championships, 435 race wins and 33 class track records in the Rocky Mountain Region with the MRA and USBA, Moham will be inducted along with Michael Lippencott, Roger “Cappy” Mason, Dick Baty, Don “Spyder” Anderson, George Willett, Jack Graham, Jeff Winter, Kent Moore, Larramie Duncan, Lee Stark and Mike Starnes.

Moham will join previous motorcycle racing inductees Ricky Orlando, Korry Hogan, Davey Durrelle, Donnie Hough and Bruce Sass.

Hall of Fame Inductees come from all facets of motorsports: Drivers, builders, mechanics, owners, facility operators and non-profit organizations. And, whether they come from being involved with racing on land, air or water, they all have the same pedigree: a passion for speed, competition and perfection.

The Induction ceremonies will be at the Infinity Park Event Center in Glendale, Colorado, on October 14, 2022 at 5:00pm MST. Tickets for the 2022 Colorado Motorsports Hall of Fame Induction Ceremony are now available at https://coloradomotorsportshalloffame.com/