Home Blog Page 1376

AHRMA: Orloff Wins Vintage Cup Races At Carolina Motorsports Park

Kershaw, SC., March 23, 2021 – Heated battles took the chill off rounds 3 and 4 of the American Historic Racing Motorcycle Association’s (AHRMA) 2021 Vintage Cup during the March 20-21 weekend at Carolina Motorsports Park.

500 Premier, which features iconic racing motorcycles from the 1960s, is the road racing class AHRMA is highlighting during 2021. Special awards and coverage are being provided by class sponsors Roadracing World (roadracingworld.com) and NYC Norton (nycnorton.com).

The class included Wes Orloff, from Milwaukee, Wisconsin, aboard Dale Coffman’s Honda 450, and Helmi Niederer on his NYC Norton Seeley G50, first time back on the track after recovering from a broken shoulder at Barber 2019.  Tony Reed was on his fast BSA B50 along with other BSA racers Andy Findling, Chuck Crocco, and David Rutherford.  Dave Roper joined the grid on the historic Dick Mann Special AJS 7R.  Rounding out the grid was Jerry Duke on his Ducati 350 Scrambler.

Saturday’s race was held in the early afternoon with weather conditions vacillating between Winter and Spring.  There was optimism in the paddock that the racing surface temperature would be warm enough to provide the tire grip needed in close vintage motorcycle competition.

Orloff took the holeshot on Saturday’s race which allowed him to avoid traffic in the first corner.  Neiderer lost the front end in the melee which also took out Vintage Cup points leader Reed’s rear wheel, taking him out of contention to earn Vintage Cup points in the race.  When the race was restarted, Orloff took another holeshot and a flag-to-flag victory.

Warmer weather and higher track temperatures offered better conditions for Sunday’s race. All of the bikes damaged during Saturday’s fracas had been repaired and the racers ready for a rematch.

At the start, Tony Read experienced mechanical issues and was unable to launch his BSA.  In a repeat of Saturday, Orloff got a strong start which he leveraged into a sizable lead.  Roper followed with Niederer in third for the duration of the race. Duke and Rutherford rounded out the top five with Findling and Crocco on their well turned-out BSAs also in the mix.

“Wes Orloff is one of the most congenial, gentlemanly fast guys out there and it’s always good for him to take a win, and he took two this weekend,” said Kenny Cummings of NYC Norton, sponsor of the 2021 Vintage Cup. Cummings continued, “At the same time, the Cinderella story of Tony Read is something we expect will continue in future races.  CMP brought him some bad luck this last weekend, but he’ll be back. The Vintage Cup is now equal points between Reed and Orloff with 2000 points each.  We know there is more excitement to come.”

Rounds 5 and 6 will be at Streets of Willow in Rosamond, CA, April 16-18, 2021.

 

Race Results (Saturday, March 20):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 AJS 7R

3 – Jerry Duke, 1967 Ducati 350 Scrambler

4 – David Rutherford, 1971 BSA B50

5 – Andy Findling, 1961 BSA Gold Star

6 – Chuck Crocco, 1971 BSA B50

 

Race Results (Sunday, March 21):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 Harley-Davidson CRTT

3 – Helmut Niederer, Seeley G50

4 – Jerry Duke, 1967 Ducati 350 Scrambler

5 – David Rutherford, 1971 BSA B50

6 – Andy Findling, 1961 BSA Gold Star

7 – Chuck Crocco, 1971 BSA B50

 

AHRMA (American Historic Racing Motorcycle Association) is a not-for-profit organization dedicated to preserving, restoring, and competing on historic motorcycles. With more than 3,000 members, AHRMA is the leading historic motorcycle racing group in North America and one of the largest in the world. The association’s enthusiastic membership reflects this country’s strong interest in classic bikes.

MotoGP: 2021 World Championship Kicks Off This Weekend In Qatar

Lights, camera… RACE WEEK! MotoGP™ revs back into life

After a long winter break and five days of official testing, the time has finally come to suit and boot up for racing. Are you ready?

Tuesday, 23 March 2021

First we saw the liveries, then we saw the class of 2021 head out for testing. Now, at the floodlit oasis of Losail International Circuit, it’s time to get suited and booted for another season of stunning competition. Rarely is anything predictable in this era of MotoGP™, but there is at least one certainty everyone can agree on: we’re most definitely ready to go racing. Are you?

This season, the headlines are overflowing before a lap has even been ticked off in anger. A new reigning Champion begins the year on the throne, Joan Mir (Team Suzuki Ecstar), and the world waits with bated breath to find out when we will get to see the return of eight-time World Champion Marc Marquez (Repsol Honda Team), although we know it won’t be to race in Qatar. Rider and team musical chairs leaves us with a different grid and new colours for many, as well as a few new faces as we welcome four rookies. But it’s the same incredible level of competition: thousandths are the new hundredths in MotoGP™.

And so we arrive into Round 1. Doha hosts the first and second Grands Prix of the season and Losail also opened its doors for all the official winter test days this year, so we’re not heading in blind but we are heading in primed. Jack Miller (Ducati Lenovo Team) arrives with the biggest target on his back, flanked by a flotilla of Yamahas as the testing timesheets saw the Aussie and his teammate Francesco Bagnaia bookend a top five reigned by Ducati and Yamaha. But there’s more to racing than one-lap speed…

Miller will definitely be one to watch as the lights go out, however, as will Bagnaia. Both are full factory this season and the pressure is certainly greater, but so too are the performances we’ve seen so far. Losail has also seen the Borgo Panigale factory enjoy some serious success of late, and the stage is set for the Bologna bullets to start the season where they’ll wish to go on: the front. That’s not forgetting the likes of Johann Zarco either as the Frenchman moves to Pramac Racing and enjoys ever more experience with the Italian machine, also proving his mettle in testing. The holeshot heroes have some serious top speed and three experienced riders who look ready, on paper, to get straight in the mix.

The timesheets in testing were far from a one-trick pony though. Three Yamahas ended the test within less than a tenth and a half of Miller at the top: Maverick Viñales (Monster Energy Yamaha MotoGP), Fabio Quartararo (Monster Energy Yamaha MotoGP) and last year’s Championship runner up Franco Morbidelli (Petronas Yamaha SRT). Viñales starts the year settled in, Morbidelli likewise. Quartararo switches to the factory Yamaha squad, but seems to have immediately found his footing. So too has nine-time World Champion Valentino Rossi at Petronas Yamaha SRT as the legendary Italian – never one to push for a stunner in testing but still near the top ten – was full of enthusiasm after the five days on track that prefaced the season. After a 2020 of highs and lows for the Iwata marque, and Ducati to an extent, are the two factories who took testing by the horns the two who arrive into the first Grand Prix ready to do the same in race trim?

Just behind them, sixth in testing saw Aprilia come to the fore. Aleix Espargaro (Aprilia Racing Team Gresini) put the Noale factory’s nearly all-new bike right up there every time he went out on track, and increasing expectation has so far been backed up by ever-increasing pace. What can the number 41 do once the lights go out? With teammate Lorenzo Savadori coming back from injury and also a rookie, Espargaro is the man in the spotlight for the new bike as racing gets underway in earnest. We’ve seen flashes of brilliance, but the 2021 aim for Aprilia will be to sustain that.

And then there’s Suzuki. Seventh and eighth was where reigning Champion Joan Mir and Suzuki Ecstar teammate Alex Rins ended the Qatar Test, and the feedback was positive. Consistently fast and consistently threatening in 2020, nothing in testing said Suzuki won’t be out the blocks to defend both the riders title and the teams’ Championship. The Hamamatsu factory’s Achilles heel – if such a thing exists in a season of such success – was qualifying last season, so that may be the first thing to keep a keen eye on as Saturday arrives. It seems though that nothing big to report may translate into “yes, we very much require the Jaws music once the lights go out for racing”… with test rider Sylvain Guintoli already having been working on their 2022 engine during the Qatar Test. If that’s not a mark of feeling everything is under control…

As race weekend arrives, meanwhile, we will be left waiting for the answer to one of the biggest questions: when will Marc Marquez return? Sidelined by injury after Jerez last year, it’s been a long, long road of surgery and recovery for the eight-time World Champion but the signs are looking good. Recently on track on a Honda RC213V-S in Catalunya and Portimão and looking ever more ready to race, there was certainly more than enough to make a good few rumours. His return won’t be in Qatar, however, so the foreboding music for his rivals remains on low for now.

On the other side of the Repsol Honda Team garage there’s plenty to talk about too though. Pol Espargaro joins the fold and, after an impressive trajectory over the past couple of seasons, began 2021 with an equally impressively quick adaptation to the Honda. Fast and fast often, the Spaniard was tenth overall in testing and could be a dark horse for much further forward as the race weekend begins, with each session of track time only giving him more experience of his new bike and team. Premier class podium finisher? Check. Race winner is the next goal.

LCR Honda Idemitsu’s Takaaki Nakagami will be hoping to move forward too after a slightly more muted test, as both he and new teammate Alex Marquez (LCR Honda Castrol) suffered a few crashes – the latter also injuring his foot but ready to head back out for Round 1. Both fought for podiums last year and Alex Marquez successfully, as a rookie no less, so they’ll want to move back up the field to where they’d left off last season.

That’s also true of KTM. The Austrian factory ripped up the history books and wrote a few replacements in 2020, with Brad Binder (Red Bull KTM Factory Racing) winning them their first MotoGP™ race – and his, as a rookie and the first premier class winner from South Africa – and new teammate Miguel Oliveira then adding two more MotoGP™ victories for KTM as well as becoming the first Portuguese premier class winner. Oliveira, now alongside Binder in the Red Bull KTM Factory Racing team, was the fastest Austrian machine in testing, but the two were side by side in P16 and P17. They’ll want more once the lights go out as KTM look to continue their roll of incredible success, but we’ve said it before and we’ll say it again: testing is testing. Friday practice, qualifying and then finally the first race of the year are often a wiser litmus test.

Iker Lecuona (Tech3 KTM Factory Racing) will be looking for more this year too as he starts his second season, needing to move up from where he ended testing, and new arrival Danilo Petrucci (Tech3 KTM Factory Racing) will be interesting to watch too as he adapts to his new bike.

Speaking of adaptation, there’s also plenty to keep an eye out for as the Moto2™ graduates begin their first seasons, eager to get in the mix. Savadori is a rookie but with a few events under his belt by now, whereas the trio of rookies moving up from the intermediate class tasted MotoGP™ for the very first time in the Qatar Test. The fastest of the three was Jorge Martin (Pramac Racing) in 14th, but it was incredibly close as reigning Moto2™ World Champion Enea Bastianini (Avintia Esponsorama) was just 0.022 further back. Luca Marini (Sky VR46 Avintia) was a little more in arrears but also impressed, and just like those adapting from one factory to another… every session is just another chance to improve.

The stage is set, the floodlights are primed and the grid is ready to start another rollercoaster season of incredible racing with the Barwa Grand Prix of Qatar. Don’t miss it, with lights out for the first MotoGP™ race of 2021 at 20:00 (GMT +3). Let’s GO!

MotoGP™ Qatar Test top five:

1 Jack Miller – Ducati Lenovo Team – Ducati – 1:53.183

2 Maverick Viñales – Monster Energy Yamaha MotoGP – Yamaha – +0.061

3 Fabio Quartararo – Monster Energy Yamaha MotoGP – Yamaha – +0.080

4 Franco Morbidelli* – Petronas Yamaha SRT – Yamaha – +0.140

5 Francesco Bagnaia – Ducati Lenovo Team – Ducati – +0.261

*Independent Team rider
 

 

Too close to call? Moto2™ gears up for 2021

Lowes, Bezzecchi and Gardner headline an all-star cast in the intermediate class

If testing taught us anything ahead of the Barwa Grand Prix of Qatar, it’s that Moto2™ is almost too close to call. Day 2 saw six riders within 0.089, and on Day 3 the top three were split by just half a tenth – giving a whole host of names the right to call themselves contenders. So let’s take a look at a few, but by no means all.

The fastest man in Qatar so far in 2021 is Sam Lowes (Elf Marc VDS Racing Team). The 2020 title challenger looks ready to pick up where he left off and you could likely call him the favourite. By far the most experienced of the quickest riders in testing, Lowes is in good shape for an assault on the crown and in a better position than this time last year when he missed the Qatar GP due to injury – and then he still took the fight all the way down to the wire…

Marco Bezzecchi (Sky Racing Team VR46), meanwhile, lurks just thousandths further back. The Italian also fought for the crown for much of the latter half of last season and became a Moto2™ race winner before a few mistakes derailed his final challenge. But mistakes can be a useful thing to a rider on a mission, because they teach lessons – and Bezzecchi has certainly proven himself a fast learner and a fast rider.

The same could be said of Remy Gardner (Red Bull KTM Ajo). The Australian has shown flashes of blazing pace and talent but sometimes peppered with mistakes or simple bad luck – including some serious injury struggles. Going into 2021, however, he’s with one of the most successful teams in the class and turned some good 2020 momentum into even more in pre-season testing. One of the quickest and most consistent in Doha so far, is this the moment it all starts to come together for Gardner? One thing’s for sure: the Aussie will push as hard as possible trying to make sure it does.

So who else looks threatening? Aron Canet (Inde Aspar Team) was a big presence on the timesheets on Friday and Saturday in testing and seems like he’s made another step forward to build on an impressive rookie season. Xavi Vierge (Petronas Sprinta Racing) had some serious speed too, and his teammate Jake Dixon – despite having been told his injury woes could even threaten his career – was another who seemed to have unlocked something even more as we begin 2021. Bo Bendsneyder (Pertamina Mandalika SAG Team) also seemed to have made a step forward. Now on a Kalex and with more experience under his belt, the Dutchman impressed in the test and could be one to watch. And what about Joe Roberts? The American moves to Italtrans Racing Team for 2021 and, after a stunner in Qatar last year, will want to start his new chapter in similar form.

It wouldn’t be a new year without some fresh faces either. Raul Fernandez (Red Bull KTM Ajo) flew the rookie flag the highest in the test as he immediately looked like a seasoned campaigner. Easily in the top ten and fastest rookie throughout, just that bit more – that he’ll be focused on finding in practice – could see him really start to challenge the more established names ahead of him too. Reigning Moto3™ World Champion Albert Arenas (Inde Aspar Team) moved up into the top ten on Day 3 too, and his old lightweight class sparring partners weren’t so far behind as Tony Arbolino (Liqui Moly Intact GP) and Ai Ogura (Idemitsu Honda Team Asia) also look to be settling in well. American Cameron Beaubier (American Racing) made solid progress too as he adjusts not from Moto3™ but MotoAmerica… and his rate of knots moving up the timesheets day by day was testament to progress. Who will strike first in the battle of the rookies, and will they take any veteran scalps along the way?

We’ll find out soon enough as the first battle – and the first Championship leader – is decided in the Barwa Grand Prix of Qatar. Moto2™ saddle up at 18:20 local time (GMT +3), with the first 25 points – and bragging rights – up for grabs.

Moto2™ Qatar Test top five:

1 Sam Lowes – Elf Marc VDS Racing Team – Kalex – 1:58.655

2 Marco Bezzecchi – Sky Racing Team VR46 – Kalex – +0.013

3 Remy Gardner – Red Bull KTM Ajo – Kalex – +0.048

4 Xavi Vierge – Petronas Sprinta Racing – Kalex – +0.177

5 Jake Dixon – Petronas Sprinta Racing – Kalex – +0.182

 

 

Veterans vs rookies: Moto3™ gets ready to rumble

Masia, Foggia, McPhee, Binder, Rodrigo; the veterans were up there in testing. But then there are the rookies…

What’s the perfect way to end the last day of testing? Probably something like Jaume Masia’s (Red Bull KTM Ajo) new – although unofficial – lap record. The Spaniard seems pretty settled in at Red Bull KTM Ajo already, and his warning shot will likely be heard by his rivals. But then, so too will that of new teammate Pedro Acosta. So is this season going to begin a clash of the rookies and veterans?

Masia’s lap was certainly a stunner, but we already know that Moto3™ is rarely a runaway game at the front and the likes of Dennis Foggia (Leopard Racing), John McPhee (Petronas Sprinta Racing), his new teammate Darryn Binder – adapting well to the Honda – and Gabriel Rodrigo (Indonesian Racing Gresini Moto3) won’t go down without a good few classic lightweight class battles. We also know that the rookies this year have hit the ground running in a way we’ve not seen for some time.

Acosta is one – the 2020 Red Bull MotoGP Rookies Cup winner second in testing behind only his teammate – and Izan Guevara (GasGas Gaviota Aspar Team) another as the reigning FIM Moto3™ Junior World Champion blazed out the blocks with some serious speed. What makes their performances all the more impressive is that they don’t know the track like they do some of the venues in Europe, and that’s something else to maybe make a few a little nervous later in the season. But for now, what is too much to ask? Wins? Podiums? They certainly have the speed, but the tactics will be a key test – as will holding their nerve.

That said, it’s been some time since this pedigree of CV has been on show. Both the FIM Moto3™JWCh and Rookies are known proving grounds and two of the most successful programmes on the Road to MotoGP™, but both Acosta and Guevara have even more in their track records. Acosta absolutely dominated the Rookies, which has been done before, but he also backed it up with race wins in the FIM CEV Repsol as he came third overall in the aforementioned FIM Moto3™ JWCh. Guevara, meanwhile, just can’t stop progressing. European Talent Cup winner in 2019, the Spaniard then moved to the FIM Moto3™ JWCh and by Jerez mid-season was almost unbeatable on his way to the crown. At Aragon, he won all three races – riders have done that before, a good match between man, machine and venue can create a little magic – only, after a nightmare qualifying, Guevara managed it three times in a row from outside the top 20 on the grid. Convinced yet?

Xavier Artigas (Leopard Racing), meanwhile, may not have been quite as near the front as his rookie compatriots, but he’s also already got a Grand Prix podium as he took to the rostrum on a wildcard in Valencia in 2019, too. On his first Grand Prix appearance. He ended the test in 11th, only just behind Darryn Binder, and shouldn’t be overlooked either after a season at the front in the FIM Moto3™ JWCh too – he’s the man who lost out on the crown to Guevara, losing a little momentum but after most definitely having done more than enough to impress regardless.

The timesheets gave us plenty to be excited about in testing. The lightning speed of the rookies and the aforementioned veterans alike, as well as riders like Romano Fenati (Sterilgarda Max Racing Team) and 2020 Rookie of the Year Jeremy Alcoba (Indonesian Racing Gresini Moto3) and their consistent pace. Who will take the first flag of the year in Moto3™? We’ll find out soon, after another 18 laps of wonderful lightweight class chaos.

Tune in for the Moto3™ race at the Barwa Grand Prix of Qatar at 17:00 (GMT +3) on Sunday the 28th of March.

Moto3™ Qatar Test top five:

1 Jaume Masia – Red Bull KTM Ajo – KTM – 2:04.263

2 Pedro Acosta – Red Bull KTM Ajo – KTM –  +0.306

3 Dennis Foggia – Leopard Racing – Honda – +0.440

4 Izan Guevara – GasGas Gaviota Aspar Team – GasGas – +0.455

5 Gabriel Rodrigo – Indonesian Racing Gresini Moto3 – Honda – +0.527

M4 ECSTAR Suzuki Names Supersport & Stock 1000 Riders

Suzuki Announces M4 ECSTAR Suzuki’s Supersport & Stock 1000 Riders for 2021

M4 ECSTAR Suzuki will field Sean Dylan Kelly and Sam Lochoff in the 2021
MotoAmerica Supersport Series, Wyatt Farris to compete in Stock 1000.

Brea, CA (March 23, 2021) – Suzuki Motor of America, Inc. announces the return of Team Hammer as its official road racing partner for the 2021 MotoAmerica AMA/FIM North American Road Racing Series. Team Hammer will field Supersport class riders using Suzuki GSX-R600s for 2021. The team returns to the 2021 MotoAmerica series as Team M4 ECSTAR Suzuki.

Riding for M4 ECSTAR Suzuki Supersport athletes include Sean Dylan Kelly and South Africa’s Sam Lochoff; who joins the team’s 600 class effort for 2021. Wyatt Farris joins M4 ECSTAR Suzuki competing in the Stock 1000 class on a GSX-R1000.

 

M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.
M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.

 

Florida’s Sean Dylan Kelly returns to Team Hammer for a third year in 2021.  SDK finished second in the 2020 Supersport Championship, having scored consistent podium finishes along with five Supersport class victories in 2020. Kelly enters 2021 with an abundance of momentum gained from a dominating pole position performance and strong second place finish in the 79th running of the legendary Daytona 200 recently at Daytona International Speedway.

 

18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.
18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.

 

Newcomer Sam Lochoff turned heads by landing on the podium in his MotoAmerica debut in 2019, finishing third in the Junior Cup season-opener. Following an abbreviated rookie season in 2019, Lochoff made his presence felt in 2020, earning 13 podium finishes — including five runner-up finishes, en route to an overall third place ranking in the 2020 MotoAmerica Junior Cup Championship.

 

Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.
Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.

Also new to M4 ECSTAR Suzuki is Wyatt Farris, joining as the team’s Stock 1000 rider for 2021.  Farris, from Calistoga, CA, is an experienced AMA Pro/MotoAmerica competitor, earning nine AMA Pro/MotoAmerica podium finishes, and taking third in the 2014 AMA Pro Supersport Championship. He finished a strong third in the 2016 Daytona 200. In 2017 he won the overall AFM Championship, was second in 2019, and topped the AFM overall points again in 2020.

In 2021, Team Hammer embarks on its 41st consecutive year of operating as an elite professional road racing team. In addition to an impressive list of accomplishments in various national and international motorcycle road racing championships, Team Hammer’s success at the AMA Pro and MotoAmerica National level is exceptional.

Team Hammer has earned an accumulated nine AMA Pro and MotoAmerica National titles while racking up 108 race victories and 291 podium finishes in multiple MotoAmerica Championship classes, AMA Formula Xtreme, AMA 750cc Supersport, and AMA Pro Daytona Sportbike series championships as well.

Along with an exceptional record of preparing, developing, and fielding championship-caliber equipment, Team Hammer is known for its consistent ability to identify and foster road racing athletes, whether they be up-and-coming riders, overlooked international competitors, or established veterans looking to reignite their careers with Team Hammer.

M4 ECSTAR Suzuki will debut its full team lineup on March 30-31 at the 2021 MotoAmerica Official Test at Circuit of the Americas in Austin, TX.

Phase Two Of Triumph Electric Motorcycle Development Completed

PROJECT TRIUMPH TE-1

CREATING UK ELECTRIC MOTORCYCLE CAPABILITY

PHASE 2 – POWERTRAIN PROTOTYPE

With the exciting reveal of the innovative advanced electric powertrain and battery and the first styling sketches for the final Project TE-1 Prototype, Phase 2 of this landmark four phase collaboration in British design and engineering reaches a successful conclusion.

Delivering on the objectives announced at the start of the TE-1 project in May 2019, focused on developing specialized electric motorcycle technology and innovative integrated solutions, this unique collaboration between Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd, and WMG at the University of Warwick funded by the Office for Zero Emission Vehicles, has already achieved significant results.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle showing the motorcycle plugged into a charging cable. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle showing a charging cable plugged into the bike. Image courtesy Triumph.

 

Including innovation in battery and powertrain design, initial test performance results far exceed the current benchmarks and industry targets. Developments in performance, efficiency, and range is enabling Project TE-1 to fully deliver the partnership’s objectives to enhance the credibility and profile of British industry providing substantial input into the future electric motorcycle strategy from Triumph.

 

  • Announcing the completion of Phase 2 – The reveal of the battery and powertrain prototype, initial high level performance results, and the first design concept drawings for the Project TE-1 Prototype motorcycle that will be created at the end of the next phase.

 

  • Key project achievements to date – Test results show significant innovation in mass, battery technology, and powertrain performance that exceeds the target set by the UK Automotive Council for 2025, meeting the project’s ambitious objectives to deliver genuine innovation for a new standard in fully usable electric motorcycle performance.

 

  • Project TE-1 is a unique collaboration between four major UK industry and academic leaders – Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd.’s
    e-Drive Division, and WMG at the University of Warwick

 

  • The objective of this two-year project is focused on developing electric motorcycle capabilities – It will provide an input into Triumph’s future electric motorcycle offer, drive innovation, capability and new intellectual property, and enhance the credibility and profile of British industry and design.

 

  • Project TE-1 is funded by the UK Government’s Office for Zero Emission Vehicles (OZEV), and delivered through Innovate UK

 

A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.
A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.

 

“The completion of Phase 2, and the promising results achieved to date, provide an exciting glimpse of the potential electric future and showcase the talent and innovation of this unique British collaboration. Without doubt the outcome of this project will play a significant part in our future efforts to meet our customer’s ambition and desire to reduce their environmental impact and for more sustainable transportation.” said Nick Bloor, Triumph CEO. “This important project will provide one of the foundations for our future electric motorcycle strategy, which is ultimately focused on delivering what riders want from their Triumph; the perfect balance of performance, handling, and real-world usability, with genuine Triumph character.”

 

PROJECT TE-1 – PHASE 2 OUTCOMES

Battery and powertrain prototype

Williams Advanced Engineering (WAE)

Based on the agreed specification, we identified appropriate cell technology and battery architecture to deliver the performance objectives. Using this as a framework, we then optimized the battery module layout to balance mass and positioning within the prototype chassis, taking into consideration center of gravity, space, and relationship with the powertrain and charging approach.

In addition to the module layout, we have also developed a new and unique vehicle control unit which is integrated into the battery pack to minimize weight and packaging. In parallel, WAE has also created innovative battery management software to ensure power is delivered in relationship to battery performance.

The outcome of Phase 2 for WAE includes a fully bench-tested battery with performance results that exceeds anything else on the market in terms of Power and Energy Density.

 

Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.
Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.

 

“We are delighted to be working on this project, working to deliver next-generation battery technology and control systems. Within the current landscape, most electric motorcycle technology arguably delivers compromised performance at low levels of battery charge. By using a lightweight, compact solution, we have been able to give the rider all of the performance all of the time (regardless of battery charge), and a class leading range. We have focused on pushing the boundaries to reduce mass and optimize frame position to benefit handling. We have also pushed the limits of battery performance, balancing the design for acceleration and range, with simulations modelled on track-based riding. In other words, as aggressive as possible,” said Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. “The energy density of this new battery will be a significant step forward from existing technology giving the rider more power, for longer. WAE has also designed and developed an electronic control unit from the ground-up, combining the battery management system with the bike control functions in one package. This is a first for this market, benefiting packaging and integration while optimizing performance and range.”

 

Integral Powertrain Ltd.’s e-Drive electric motor/invertor unit from the right side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit from the right side. Photo courtesy Triumph.

 

Integral Powertrain Ltd.’s e-Drive Division

Our experience in cutting edge motor and inverter design and manufacture has helped us to push this technology on to the next level for the TE-1 project. In Phase 1 we worked to integrate the normally separate motor and inverter into one single, compact package. Integration reduces the mass and volume of the drivetrain by reducing additional boxes on the vehicle, mounting features, coolant pipework, and heavy high voltage connections.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.

 

The innovative integration concept is also a fully scalable one, whereby the number of power stages can increase for larger diameter, higher torque motors for example. Combined with our state-of-the-art motor technology, we have seen very exciting results already, with the motor achieving a power density twice that of the target set by the UK Automotive Council for 2025.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.

 

We have also implemented advanced silicon carbide switch technology in the inverter. This reduces losses in the inverter and results in greater drivetrain efficiency, power delivery, and range. At the end of Phase 2, we are proud to have built a fully operational, new prototype motor that has been bench tested and is delivering on all aspects of performance.

 

Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.
Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.

 

“One of the most influential factors in how well a motorcycle handles and performs is mass, so at Integral Powertrain we have focused heavily on making a step change in motor and inverter design, removing heavy high voltage cables for example. This delivers a product that is significantly more compact and lighter than anything currently available on the market. The motor produces almost 180 horsepower (130kW), but weighs only 22 pounds (10 kg), much lighter than existing technology and clearly a small fraction of the mass of traditional internal combustion engines.” said Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. “The silicon carbide switch technology in our new scalable integrated inverter will help set new standards in terms of electric motorcycle efficiency; application of this technology means a lighter weight overall with significantly more performance and range. In parallel, we have a very strong focus on design for manufacture and assembly activity, so that all this high motor and inverter performance can be offered cost-effectively. Ultimately, this is really going to be an industry-leading powertrain that will help define the future of electric mobility. With the TE-1 project we are proud to be part of this landmark project for British industry.”

 

WMG, at the University of Warwick

At WMG we have been working closely with all the TE-1 partners during Phase 1 and 2 to develop representative models to simulate the systems of the bike including battery, motor, and vehicle control. Initially this allowed us to validate the specification against the intended component selection by assessing performance criteria such as range and top speed with initial models. This has enabled Triumph to carry out software development at an early stage prior to hardware being built with thorough testing programs to ensure that real-life testing can deliver on refinement. Most recently we have been conducting powertrain rig testing using the prototype IPT powertrain to ensure our simulations are accurate and to confirm that the motor functions within the system as intended. We have also been providing guidance to Triumph relating to future legislation, charging infrastructure and recycling strategies that will need to be implemented across future electric motorcycle platforms.

 

The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.
The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.

 

“Our creation of initial computer-based simulation models at the start of Phase 1 has been instrumental in ensuring that the component selection was appropriate to achieve the performance targets defined by the partners for the TE-1 Prototype. We have continued with this work across Phase 2 of the project, refining the models to a much more complex level to allow us and the partners to imitate further components on the bike such as braking, throttle, lighting and other systems and mimic real-world riding to provide development opportunities before components were fully designed. Additionally, we have created a physical rig wired with all the control units, to implement a design validation test program to ensure the function of each section was within the allowable range.” said Truong Quang Dinh, Assistant Professor of Energy Management and Control Systems at WMG, University of Warwick.

 

Triumph Motorcycles

Throughout Phase 2 Triumph have developed an all-new advanced vehicle control software which incorporates all the electrical systems to ensure intuitive throttle response, regen braking, traction control and all of the dimensions that a customer would expect from a high-performance Triumph motorcycle. Additionally, we have integrated leading functional safety strategies into this software, plus supported WMG in rig testing and have also fully developed the new prototype instrument display. Alongside this electrical and control system work, we have designed a brand-new prototype chassis including main frame and rear frame which have been optimized alongside the battery and motor packages which will be further evolved in Phase 3 into the TE-1 Prototype which will be used as a mule test platform in Phase 4. During this chassis development we have taken into account both the transmission design and the final styling of the TE-1 Prototype, the drawings of which we are pleased to reveal for the first time today.

 

Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.
Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.

 

Steve Sargent, Triumph’s Chief Product Officer said “The starting point for us in the TE-1 project was to gather important customer feedback about what riders really want from their motorcycles and understand how an electric motorcycle can provide the experience that riders desire. This includes considering the type of riding, range, feel and nature of power and torque delivery together with the ergonomics and bike controls. Taking all this feedback into consideration we began the chassis design, focusing on bringing everything together on the TE-1 Prototype in a way that provides a riding experience that is exciting and new, but ultimately familiar. We have begun to define the powertrain and battery interaction through the use of software refinement to deliver an exhilarating power delivery and throttle response, which provides great control and feels intuitive to the rider. Overall, with the styling we wanted to create something that is fresh and exciting but a natural evolution of the Triumph brand. Something desirable in its own right, with distinctive Triumph DNA and definitely not something that is different just for the sake of being different. Pulling all of this together with the partners we are thrilled to see the progress of such an exciting demonstration vehicle which incorporates the cutting-edge technology needed to guide the strategy for the future roadmap of electric motorcycles from Triumph. The team are proud to be leading such an innovative, strong and dynamic project with a fantastic group of partners which ultimately should set British engineering and design rightly at the forefront of future 2-wheel design.”

  

PROJECT TE-1 OVERVIEW

Project TE-1 collaboration – Triumph Motorcycles, industry experts, academic leaders, and UK Government

 Project Triumph TE-1 is a ground-breaking collaboration between Triumph Motorcycles and the UK’s electrification experts, each of whom is focused on creating innovations in their own areas:

 

  • Triumph Motorcycles is leading the project, providing advanced motorcycle chassis design and engineering expertise, manufacturing excellence and pioneering functional safety systems, as well as defining electric drivetrain power delivery characteristics.

 

  • Williams Advanced Engineering is providing industry-leading lightweight battery design and integration capability, using its test and development facilities to deliver an innovative battery management system combined with vehicle control unit.

 

  • Integral Powertrain Ltd.’s e-Drive Division is leading the development of bespoke power-dense electric motors and a silicon carbide inverter, integrating both into a singular motor housing.

 

  • WMG, at the University of Warwick is providing electrification expertise, and the critical vision to drive innovation from R&D to commercial impact, through modelling and simulation based on future market needs.

 

  • The Office for Zero Emission Vehicles (OZEV) is a team working across government to support the transition to zero emission vehicles, as well as funding to support chargepoint infrastructure across the UK. This will contribute to economic growth and will help reduce greenhouse gas emissions and air pollution on UK roads. OZEV is part of the Department for Transport and the Department for Business, Energy and Industrial Strategy.

 

  • Innovate UK is the government’s research and innovation agency that supports business led R&D funding and UK business growth.

 

A two-year project focused on developing technical innovation and advanced electric motorcycle capabilities

 The project is organized into four main phases, with one of its key aims being increased systems integration. By developing individual components of automotive-based electric drivetrains and optimizing them into innovative combined units, the project aims to deliver sophisticated electric motorcycle systems which reduce mass, complexity, and package requirements.

Triumph Motorcycles is working alongside the partner organizations to accelerate joint expertise in the packaging and safety of batteries, optimum electric motor sizing and packaging, the integration of braking systems including regenerative braking, and advanced safety systems. The innovation and capabilities developed in these areas will input into Triumph’s future electric motorcycle strategy.

The Project Triumph TE-1 partnership, with the support of the Office for Zero Emission Vehicles and Innovate UK, is focused on facilitating the creation of:

  • Electric motorcycle capability that meets the needs of customers seeking lower environmental impact transportation, delivering against the UK’s focus on reducing emissions
  • Strong, commercially viable, and sustainable partnerships with UK industry manufacturers
    and supply chains
  • Expertise and capability within the UK workforce, creating jobs and a talent base that both ensures sustainable employment and drives the UK’s reputation and influence on the world stage.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Dr Francesca Iudicello CEng MIMechE – Program Manager – Automotive Zero Emission Vehicles – Innovate UK

“Innovate UK has worked in close partnership with the Office of Zero Emission Vehicles to deliver the integrated delivery program since 2013. This provides funding to ground-breaking innovation in the automotive sectors for zero emission vehicle technologies from proof of concept to vehicle demonstration.

The TE-1 project is a part of this program under the IDP15 competition and is aligned with the road to zero policy and marks an important milestone towards zero emission vehicles and the race to net zero.

We are proud to have delivered the funding for this project which is a pioneering project for the zero-emission vehicle motorcycle manufacturing in the UK as it has successfully developed, thanks to a very talented group of innovators, the very first Triumph electric motorcycle in a very quick development time and prepared the groundwork for the future of electric motorcycles.”

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Jon Bray – Research & Development (R&D) Lead – Office for Zero Emission Vehicles

“Investment in Research and Development is key to our mission of putting the UK at the forefront of the design, manufacture, and use of zero emission vehicles. By supporting these technologies, we are helping to deliver our road transport decarbonization goals, while anchoring economic activity across the UK, which will support the green recovery in the wake of the pandemic.

This is why the Office for Zero Emission Vehicles continues to design and fund a series of R&D competitions, which support UK innovation in developing zero emission vehicle and charging infrastructure technologies.

Triumph’s TE-1 project is part of our diverse R&D portfolio of ambitious electrification projects, which are addressing challenges in line with our accelerated phase-out ambitions of petrol and diesel cars and vans and electric vehicle commitments in the Prime Minister’s Ten Point Plan.

We are excited to see that our funding is supporting Triumph Motorcycles in driving forward innovation and capability in the electric motorcycle space, while fostering collaboration between several pioneering UK companies”.

Melissa Paris Reviews Suzuki Katana Accessories, In The March Issue

Featured In the March 2021 issue of Roadracing World:   

     “We started by installing a slightly taller-than-stock version of what Suzuki calls a ‘meter visor,’ and it took just over five minutes. All the necessary hardware is included along with detailed instructions, which is pretty impressive considering the entire procedure is simply removing four bolts, swapping the visor, and reinstalling with four bolts.

      “The added wind protection will be nice for anyone who spends time on the highway while still retaining a clean, OE look…” 

—Product Evaluation: Suzuki Katana Accessories, by Melissa Paris.

 

            The Product Evaluation we did on official accessories for the Kawasaki Z900RS retro bike proved popular, so we’re now looking at official Suzuki accessories for the latest version of the Katana. We enlisted the help of experienced racer and race mechanic Melissa Paris. It’s all in the latest issue of Roadracing World!

 

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

PREVIEW the March 2021 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW . Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday. Read the March 2021 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world

 

MotoAmerica: Escalante Defending Supersport Title

MotoAmerica Supersport Champion Richie Escalante will defend his title on a Kawasaki ZX-6R in 2021.

According to a press release, Escalante and his HONOS Racing team are joining forces with Hudson Valley Motorcycles’ (HVMC) Corey Alexander, who is returning to the MotoAmerica Stock 1000 and Superbike Cup classes on a new, 2021-model Kawasaki ZX-10RR.

 

Corey Alexander (23). Photo by Brian J. Nelson.
Corey Alexander (23). Photo by Brian J. Nelson.

 

In addition, Escalante’s 2020 teammate Jorge Ehrenstein will compete in selected MotoAmerica Supersport rounds.

The team will be known as HONOS HVMC Racing.

“This new partnership allows for better utilization of technical and logistical resources whilst offering a more substantial presence in the series both on & off the racetrack,” read a press release issued by the new HONOS HVMC Racing team. “Similarly to the 2020 season the team will continue to utilize Graves Motorsports technical staff, resources, and expertise to harness the strongest performing Kawasaki machinery in the MotoAmerica paddock.”

Escalante is sponsored by HJC Helmets, Vircos Leathers, Alpinestars, Fresh N Lean, Electrolit, Royal Assets, 5ta Raiz, and Strats & Legal.

Alexander is sponsored by Tucker, Optimum Support Group, Prestige Services Group, FA Madden Painting LLC, Freeman Racing, Four3 Performance Lab, FTA Embroidery, Ikoniqa, and Gemini Racing.

 

Aprilia Racers Days Track Program Coming To U.S. & Canada In 2021

APRILIA 2021 “APRILIA RACERS DAYS” TRACK PROGRAM TO COVER U.S. AND CANADA

THE INITIATIVE GROWS TO NINE CIRCUITS ACROSS NORTH AMERICA, CONTINUING TO PROVIDE THE BEST ON-TRACK EXPERIENCES FOR THE MOST ENTHUSIASTIC AND DEMANDING SPORTBIKE RIDERS WITH SUPPORT FROM THE OFFICIAL PARTNER PIRELLI, DAINESE, AND AGV.

NEW YORK, NY – MARCH 22, 2021 – Aprilia USA and Aprilia Canada are pleased to announce the 2021 dates for the Aprilia Racers Days program, taking place at 9 circuits across North America, where enthusiasts are welcomed to join in an intimate track day experience,  with the opportunity to ride the latest models from Aprilia.

Aprilia Racers Days will showcase the latest 660 platform with RS 660 and Tuono 660 models from the start, and will include the brand new 2021 RSV4 starting April, and Tuono V4 shortly afterward. The Manufacturer-led activity will host the track experience across seven US tracks, and for the first time, the addition of event dates in Canada. This year’s program is the biggest to date, focusing on premier circuits across North America.

 

 

EVENT DETAILS:

 

Buttonwillow Raceway Park

Monday, March 29, 2021

24551 Lerdo Hwy, Buttonwillow, CA

 

Circuit of The Americas

Monday, May 3, 2021

9201 Circuit of the Americas Blvd, Austin, TX

 

WeatherTech Raceway Laguna Seca

Monday, May 17, 2021

1021 Monterey Salinas Hwy, Salinas, CA

**JP43 Training Available

 

Virginia International Raceway (South Course)

Monday, May 24, 2021

1245 Pine Tree Rd, Alton, VA

*Following MotoAmerica Weekend

**JP43 Training Available

 

Pittsburgh International Race Complex

Monday, June 7, 2021

201 Penndale Exd, Wampum, PA

 

Ridge Motorsports Park

Monday, June 28, 2021

1060 W Eells Hill Rd, Shelton, WA

*Following MotoAmerica Weekend

**JP43 Training Available

 

Calabogie Motorsports Park

Monday, August 16, 2021

462 Wilson Farm Rd, Calabogie, ON

 

Shannonville Motorsports Park

Monday, August 23, 2021

7047 Old Highway 2, Shannonville, ON

 

Barber Motorsports Park

Tuesday, September 21, 2021

6040 Barber Motorsports Pkwy, Birmingham, AL

*Following MotoAmerica Weekend)

 

For More Information: http://www.aprilia.com/

Tickets Available at: https://storeusa.aprilia.com

 

Aprilia Racers Days events will be supported directly by Aprilia trained technicians and product specialists, as well as partners Pirelli, Dainese and AGV to offer the best on-track experience with expert advice, performance and protection. The cost of participation in the events will not only qualify for an incredible track day experience with your existing motorcycle, but also include a VIP Aprilia Racers Days package, with ability to demo a new Aprilia for one of the track day sessions, equipped with Pirelli performance tires. Additionally, activities will include coaching, event photography, and an included lunch. Attendees will also have the ability to be measured for a custom suit from Dainese and try out the latest track suits as well as helmets from AGV.

New for 2021 will be the inclusion of a racing school in collaboration with Jason Pridmore’s JP43 Training, offering individual instruction to riders looking to become better, safer, and more proficient in their motorcycling skills, both on and off track. Limited to a handful of riders, at a premium to the standard price at select Aprilia Racer Days events (Laguna Seca, VIR, The Ridge), JP43 Training will provide a customized program for participants, giving an unmatched level of instruction to enhance individual understanding of the machine and riding technique, in order to  increase rider knowledge, confidence, and help them to achieve their goals, and continue to set new ones.

 

ABOUT APRILIA RACERS DAYS PARTNERS

Using its 17 years as the Official Tire Supplier to the FIM Superbike World Championship, Pirelli developed the DIABLO ROSSO™ CORSA II, an innovative new tire derived from racing and designed for use on the road and track. DIABLO ROSSO™ CORSA II is the first-ever Pirelli motorcycle tire that uses two compounds applied in three zones on the front tire and three compounds applied at five zones on the rear, creating an aggressive combination. Innovative profiles, a new structure and a new tread design allow every rider to follow their leanings.

To learn more about the complete line of Pirelli motorcycle tires, please visit www.pirelli.com.

For each of the events, the latest sport-oriented technical apparel and helmets will be showcased by Dainese and AGV, the leader in protection for moto and dynamic sports, which joins Aprilia Racers Days in 2019 for the first time ever as Official Safety Sponsor. The natural synergy between these two Italian brands – both known for premium products and innovation – brings a new level of excitement to the tour.

At each stop along the tour, Dainese will have master tailors from its Custom Works program available for fittings and consultations, and professionals from Dainese D-Stores will offer a demo fleet of D-Air suits for both men and women and  wide range  of AGV helmets including Pista GP R, Corsa R, Sport Modular, K-5 S, and AX-9 for participants to test on the track.

To learn more about the complete line of Dainese and AGV, please visit the respective websites:

www.dainese.com

www.agv.com

ABOUT PIRELLI

Pirelli was founded in Milan in 1872 and today stands as a global brand known for its cutting edge technology, high-end production excellence and passion for innovation that draws heavily on its Italian roots. With around 30,000 employees, Pirelli is a major player in the tire industry and the only global player focused solely on the Consumer tire market, which includes tires for cars, motorcycles and bicycles. Pirelli is now concentrating on High Value tire markets, delivering innovative tires and developing Specialties and Super Specialties for its comprehensive product portfolio. Pirelli has a long link with motorsport and it sustains its technological excellence by bringing innovations developed within the motorsport arena into its consumer products. The company currently supports over 460 car and motorcycle sport events and has been the exclusive tire supplier to the Formula One™ World Championship since 2011. Such a strong presence in motorsport enables Pirelli to transfer a series of avant-garde solutions to its day-to-day operations providing the final consumer with the maximum levels of performance and safety.

Pirelli Tire North America (PTNA) services North America through its Modular Integrated Robotized System (MIRS) facility and research and development center at its Rome, Georgia headquarters, its state-of-the-art manufacturing plant in Silao, Mexico and its New York City, Montreal and Mexico City sales and marketing offices. The company manufactures, distributes and markets original equipment and replacement tires for export and domestic car/motorcycle applications (US, CA, MX) and Agro/Heavy Truck platforms (MX).

ABOUT DAINESE GROUP

Founded in 1972 by Lino Dainese, true to its mission of advocating and delivering safety in dynamic sports, the Company designs advanced protective head-to-toe gear for motorcycling, winter sports, cycling, horse riding and sailing. In 2007 Dainese acquired the iconic premium sport helmet manufacturer AGV, established in 1947. The new Dainese Settantadue brand, established in 2017, reinterprets the design of historic garments that are a part of the stylistic heritage of the Group, with a contemporary twist. Dainese and AGV products represent the technology frontier in the field of protection for dynamic sports and are used by the world’s top athletes including Valentino Rossi and Sofia Goggia, Olympic Champion and winner of the Downhill World Cup.

MotoGP: Michelin Updates Tire Range For 2021

Michelin’s new MotoGP™ range set for race début at Losail

An intensive programme over the winter break has seen Michelin make further improvements to its tyres for the MotoGP™ World Championship. Despite the challenges posed by the Covid-19 pandemic, Michelin Motorsport’s development experts have responded to Dorna Sports’ call for technical stability by building on the range’s existing strengths, with the accent on fine-tuning the tyres’ respective casing/compound pairings. The result is a more streamlined and more versatile range for 2021, along with greater consistency, in perfect keeping with the brand’s ‘Grip made to last’ pledge.

The official test sessions earlier this month saw Michelin complete its groundwork and preparations ahead of this year’s MotoGP™ World Championship which will kick off with two grands prix under the floodlights of Qatar’s Losail International Circuit. With assistance from the state’s government, and in compliance with strict sanitary measures, Dorna Sports has effectively succeeded in organising back-to-back races there, beginning with the Barwa Grand Prix of Qatar on March 28, followed by the Grand Prix of Doha on April 4. In keeping with the tradition that gives the action in Qatar its unique flavour, both clashes will take place after nightfall.

Because of its desert location and the frequent presence of wind-blown sand on the track, Losail International Circuit’s surface is notoriously abrasive and tends to become more slippery as grip levels drop off due to the cooler temperatures encountered after sunset. However, the ability of Michelin’s MotoGP tyres to take these characteristics in their stride has contributed actively to the setting of new fastest-race-lap, shortest-race-duration and top-speed records for the 5.380-kilometre circuit.

 

 

Tyres available for the two Qatar races

MICHELIN Power Slick tyres: SOFT (white sidewall markings), MEDIUM (no markings) and HARD (yellow markings) front and rear. The SOFT and HARD fronts are symmetric, while the MEDIUM front and all three rear options are asymmetric, with a harder compound for the right shoulder due to the circuit’s 10 right-hand turns, compared with just six left-handers. The tyre allocation has also been adapted to the characteristics of the track. Each rider can choose a maximum of 6 SOFT, 5 MEDIUM and 4 HARD tyres for the front and rear.

In the case of poor weather, and subject to their use being authorised by Race Control, SOFT (blue sidewall markings) and MEDIUM (no markings) front and rear MICHELIN Power Rain tyres will also be available (asymmetric rears).

 

Piero Taramasso (Two-Wheel Manager, Michelin Motorsport)

“I am very proud of what Michelin Motorsport’s teams in Clermont-Ferrand and on the ground have achieved. In spite of the difficult circumstances they had to contend with, and working within the existing technical framework, they have succeeded in building on the experience we acquired in 2020 to revisit our MotoGP range in depth. Our pre-season test programme saw us meet our development targets and the results are extremely encouraging. They mean we will be able to provide the riders with a range that is both more streamlined and more versatile, and that in turn will facilitate their bike set-up work. We have also improved consistency by a move to slightly harder compounds, while at the same time maximising grip and overall performance. These gains were praised by our partners at the pre-season test in Qatar where our tyres played a part in the establishment of two new MotoGP records for Losail: that of the fastest lap for the track – which was the work of Ducati Team’s Jack Miller, with a time of 1m53.183s – and that of the highest speed ever reached there when Johann Zarco’s Pramac Racing Ducati was clocked at 357.6kph down the main straight!”

Red Bull Rookies Cup & KTM Add Engineering Apprenticeships

KTM Young Professionals

Heading into the 15th Red Bull MotoGP Rookies Cup season and hence the 15th year of our partnership with KTM we are excited to be a part of a great new initiative.

The Young Professionals 

As part of their apprenticeship program, KTM are sending two young engineers, Laura Stempfer and Maximilian Götz, to join the Rookies Cup technical staff at the GPs in 2021.

 

Laura Stempfer. Photo courtesy Red Bull MotoGP Rookies Cup.
Laura Stempfer. Photo courtesy Red Bull MotoGP Rookies Cup.

 

Maximilian Götz. Photo courtesy Red Bull MotoGP Rookies Cup.
Maximilian Götz. Photo courtesy Red Bull MotoGP Rookies Cup.

 

KTM are announcing the successful applicants today and this is their statement:

“We are delighted to be expanding the extremely successful partnership with Red Bull with the YOUNG PROFESSIONALS, through which, in addition to the young riders, we are also training the technicians of tomorrow together. With Laura and Maximilian, we will send two highly motivated KTM apprentices to the racetracks with the Red Bull MotoGP Rookies Cup in 2021, they have prevailed from a large number of applicants through good operational and school performance as well as their above-average commitment. With their ready-to-race spirit, the KTM apprentice workshop will be represented in a worthy way.”

Jens Hainbach, KTM Vice President Motorsports Road Racing

This is a perfect match for the Rookies Cup and we are thrilled to see two more teenagers living their dreams.

For more information on career opportunities at KTM, go HERE

MotoGP: Dromo Submits Design For New Hungarian Circuit (Video)

Editorial Note: Scroll down to the bottom to watch a video of simulated laps of the proposed track design.

 

THE TRACK

15 corners with 7 complex radiuses will give a lot of character; height changes, cambers and blind crests will do the difference between boys and men; over 5 Km in length with 30% less use of the terrain, avg. speed of over 184 Kph, ideal lap time 1’38.7”.

In terms of safety, the proposed track has been done DroCAS™, the cutting-edge safety simulator for MotoGP and F1. The overall track has been assessed also by Artificial Intelligence algorithms (Transfer Learning + Generative adversarial network) to ensure the level of safety will be state of the art in respect of the actual racetracks.

The proposed layout provides several overtaking chances avoiding the long-straight-hairpin paradigm, that does not encourage multiple-turns battles. The first overtaking hotspot is Turn 1, a very fast bend that provides the opportunity for the battling competitors to stay close to each other up to the second hotspot, Turn 3, that should provide a perfect opportunity to finish the overtaking maneuver. Then, Turn 5, thanks to its generous banking, encourages competitors to try the inside line to pass. This is also the best hotspot for the Inner Loop configuration. After a challenging technical sector from Turn 6 to Turn 11 a new overtaking opportunity opens up at Turn 12. The longest straight of the track then provides the best opportunity to make the most of top speed advantage and complete a pass at the following Turn 14.

 

A computer rendering of Dromo's submitted design for the Magyar Nemzetközi Motodrome in Hungary. Image courtesy Dromo.
A computer rendering of Dromo’s submitted design for the Magyar Nemzetközi Motodrome in Hungary. Image courtesy Dromo.

 

A no-impact design for MotoGP riders, validated with DIL Driving Simulators, will use composite runoffs to complete the safety level with FIM Grade A barriers on the first line of protection and latest FIA debris fences on the second. Full inner and outer service road to help marshalling and track operations is included to connect all points of the racetrack on both sides, also thanks to two underpasses that exploit the elevations changes of the track passing below it in an integrated manner.

Said that, the rideability has been inspired by the best in the World. Far from the modern “Mickey-mouse” circuits, it takes inspiration from the old TT-Assen (dubbed the “University of Motorcycling”) to the classic Suzuka, from the fastest Termas de Rio Hondo to the formidable Philip Island, rider’s favorite.

A unique trait of the proposed layout is the pit-exit solution that, exploiting the uphill Turn 1, passes below it and rejoins the track safely after Turn 2. Being an integral part of the masterplan – and not a thought after patch solution – the proposed pit-exit is not cramped and the turns that compose it are wide and flowing.

The pit-entry after Turn 14 follows a more traditional layout, leaving the track at the safest point available before the pits.

The Long Lap Penalty now required at top-level motorbike events is foreseen safely on the outside of Turn 12.

The CCW (counterclockwise) international Circuit (5050 m length up to 14 m wide, FIM Grade A – FIA Grade 1) can be split in two concentric configurations. A CW inner loop of 1659 m (FIA Grade 3) and a CCW outer loop of 3615 m (FIA Grade 2) that can be run completely independently and concurrently. The shortcuts allowing the track to be split in two separate are designed to minimize or even totally annul the need for barriers re-alignment, providing operational efficiency and savings.

Inside the spaces left by the circuit configurations, and around it, will take place different circuits, some requested and some suggested, to complete the offer of the Magyar Nemzetközi Motodrome.

“A HUMAN CENTERED TRACK: THE BEST EXPERIENCE FOR THE VISITORS, THE BEST EXPERIENCE FOR THE RIDERS”

 

A computer rendering of Dromo's submitted design for the Magyar Nemzetközi Motodrome in Hungary shows the back of the main grandstand/paddock garage complex. Image courtesy Dromo.
A computer rendering of Dromo’s submitted design for the Magyar Nemzetközi Motodrome in Hungary shows the back of the main grandstand/paddock garage complex. Image courtesy Dromo.

 

Why is our design streets ahead than the proposed track layout?

· Iconic and unique design, allow Hungary to be placed on a map with strong recognizability.

· Integrating the main pit building with the main grandstand allows to reduce the construction costs and operations, leaving the spectators to view the whole action on track

· An accurate phasing plan allow to build the first things required to host MotoGP at a great value, leaving the development of all the other facilities to be implemented with the remaining funds.

· Having the paddock external to the track allows to reduce the land usage, the length of the fencing and drainage system, in the end reducing the complexity of the site

· The asphalt is laid more where it is easier to lay, like the parking lots, reducing the highly specialized asphalt on the track through a flowing fast design, more entertaining, and safer

Why is this the best experience for the visitors?

· Because riders will enjoy it, visitors will be entertained, both on site and in television.

· The purpose of the project is to establish the maximum possible connection between the public and the activity of the track, with an approach to the project aimed at ensuring the best experience for the visitor;

· The visitor is always put on a higher level, through an elevated path that surrounds the track and connects all its main functions, and makes it possible for the visitor to have a privileged and more complete view throughout the event, from views of the Paddock to an almost 360° view of the track;

· Green areas and trees are totally integrated both in the system of distributive paths and in the architecture itself, in order to harmonize the project of the circuit with the surrounding landscape and to enrich and enhance the main places of interest of the system, making the circuit a unique biophilic organism;

· We developed a program that could add value on non-event days and mindful of phasing, thinking at the racetrack as a public MOTOR PARK, surrounded by implementable activities like a boutique hotel, private villas and retails spaces, to ensure long-term viability of the event and development;

WHO IS DROMO?

The Dromo project team is built around experts related to the design, engineering, construction, and hosting of motorsport events & other events. The team has experience of conversion of brownfield locations, green field motorsport circuits, and street circuits for cars & motorbikes.

Dromo have delivered designs for some of the world’s most famous iconic racetracks, with respect to enhancements, modifications, redesigns or refurbishment activities inclusive of resurfacing of tracks. The multi discipline team covers architectural, circuit design and master planning services to create motorsport facilities that are truly state of the art. Our extensive use of computer related technology, simulation tools developed in-house,
allows us to simulate multiple circuit solutions, resulting in an experience that’s electrifying for riders, drivers and, crucially, spectators.

Dromo is at the forefront of innovative technological sports destination and racing circuit design. Our research into structure, safety standards and technology means that the facilities we design are state of the art. Our analytical tools, allow us to simulate multiple solutions and test variable, e.g. run-offs and profiles. Although prototyping would be the ideal, the scale of most projects means testing these sequences is financially prohibitive.

That’s where the in-house high-tech simulators give Dromo the edge. They use these to allow the design team and named drivers /riders to test the circuit and make comment prior to the design being finalised.

The application of these softwares allows creation of various circuit layouts in very little time, and calculations indicative of speeds based on the more advanced 3 dimensional environment.

 

AHRMA: Orloff Wins Vintage Cup Races At Carolina Motorsports Park

Wes Orloff (74) on his 1967 Honda 450. Photo by etechphoto.com, courtesy AHRMA.
AHRMA racer Wes Orloff (74) on his 1967 Honda 450. Photo by etechphoto.com, courtesy AHRMA.

Kershaw, SC., March 23, 2021 – Heated battles took the chill off rounds 3 and 4 of the American Historic Racing Motorcycle Association’s (AHRMA) 2021 Vintage Cup during the March 20-21 weekend at Carolina Motorsports Park.

500 Premier, which features iconic racing motorcycles from the 1960s, is the road racing class AHRMA is highlighting during 2021. Special awards and coverage are being provided by class sponsors Roadracing World (roadracingworld.com) and NYC Norton (nycnorton.com).

The class included Wes Orloff, from Milwaukee, Wisconsin, aboard Dale Coffman’s Honda 450, and Helmi Niederer on his NYC Norton Seeley G50, first time back on the track after recovering from a broken shoulder at Barber 2019.  Tony Reed was on his fast BSA B50 along with other BSA racers Andy Findling, Chuck Crocco, and David Rutherford.  Dave Roper joined the grid on the historic Dick Mann Special AJS 7R.  Rounding out the grid was Jerry Duke on his Ducati 350 Scrambler.

Saturday’s race was held in the early afternoon with weather conditions vacillating between Winter and Spring.  There was optimism in the paddock that the racing surface temperature would be warm enough to provide the tire grip needed in close vintage motorcycle competition.

Orloff took the holeshot on Saturday’s race which allowed him to avoid traffic in the first corner.  Neiderer lost the front end in the melee which also took out Vintage Cup points leader Reed’s rear wheel, taking him out of contention to earn Vintage Cup points in the race.  When the race was restarted, Orloff took another holeshot and a flag-to-flag victory.

Warmer weather and higher track temperatures offered better conditions for Sunday’s race. All of the bikes damaged during Saturday’s fracas had been repaired and the racers ready for a rematch.

At the start, Tony Read experienced mechanical issues and was unable to launch his BSA.  In a repeat of Saturday, Orloff got a strong start which he leveraged into a sizable lead.  Roper followed with Niederer in third for the duration of the race. Duke and Rutherford rounded out the top five with Findling and Crocco on their well turned-out BSAs also in the mix.

“Wes Orloff is one of the most congenial, gentlemanly fast guys out there and it’s always good for him to take a win, and he took two this weekend,” said Kenny Cummings of NYC Norton, sponsor of the 2021 Vintage Cup. Cummings continued, “At the same time, the Cinderella story of Tony Read is something we expect will continue in future races.  CMP brought him some bad luck this last weekend, but he’ll be back. The Vintage Cup is now equal points between Reed and Orloff with 2000 points each.  We know there is more excitement to come.”

Rounds 5 and 6 will be at Streets of Willow in Rosamond, CA, April 16-18, 2021.

 

Race Results (Saturday, March 20):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 AJS 7R

3 – Jerry Duke, 1967 Ducati 350 Scrambler

4 – David Rutherford, 1971 BSA B50

5 – Andy Findling, 1961 BSA Gold Star

6 – Chuck Crocco, 1971 BSA B50

 

Race Results (Sunday, March 21):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 Harley-Davidson CRTT

3 – Helmut Niederer, Seeley G50

4 – Jerry Duke, 1967 Ducati 350 Scrambler

5 – David Rutherford, 1971 BSA B50

6 – Andy Findling, 1961 BSA Gold Star

7 – Chuck Crocco, 1971 BSA B50

 

AHRMA (American Historic Racing Motorcycle Association) is a not-for-profit organization dedicated to preserving, restoring, and competing on historic motorcycles. With more than 3,000 members, AHRMA is the leading historic motorcycle racing group in North America and one of the largest in the world. The association’s enthusiastic membership reflects this country’s strong interest in classic bikes.

MotoGP: 2021 World Championship Kicks Off This Weekend In Qatar

Losail International Circuit. Photo courtesy of Dorna.
Lusail International Circuit. Photo courtesy of Dorna.

Lights, camera… RACE WEEK! MotoGP™ revs back into life

After a long winter break and five days of official testing, the time has finally come to suit and boot up for racing. Are you ready?

Tuesday, 23 March 2021

First we saw the liveries, then we saw the class of 2021 head out for testing. Now, at the floodlit oasis of Losail International Circuit, it’s time to get suited and booted for another season of stunning competition. Rarely is anything predictable in this era of MotoGP™, but there is at least one certainty everyone can agree on: we’re most definitely ready to go racing. Are you?

This season, the headlines are overflowing before a lap has even been ticked off in anger. A new reigning Champion begins the year on the throne, Joan Mir (Team Suzuki Ecstar), and the world waits with bated breath to find out when we will get to see the return of eight-time World Champion Marc Marquez (Repsol Honda Team), although we know it won’t be to race in Qatar. Rider and team musical chairs leaves us with a different grid and new colours for many, as well as a few new faces as we welcome four rookies. But it’s the same incredible level of competition: thousandths are the new hundredths in MotoGP™.

And so we arrive into Round 1. Doha hosts the first and second Grands Prix of the season and Losail also opened its doors for all the official winter test days this year, so we’re not heading in blind but we are heading in primed. Jack Miller (Ducati Lenovo Team) arrives with the biggest target on his back, flanked by a flotilla of Yamahas as the testing timesheets saw the Aussie and his teammate Francesco Bagnaia bookend a top five reigned by Ducati and Yamaha. But there’s more to racing than one-lap speed…

Miller will definitely be one to watch as the lights go out, however, as will Bagnaia. Both are full factory this season and the pressure is certainly greater, but so too are the performances we’ve seen so far. Losail has also seen the Borgo Panigale factory enjoy some serious success of late, and the stage is set for the Bologna bullets to start the season where they’ll wish to go on: the front. That’s not forgetting the likes of Johann Zarco either as the Frenchman moves to Pramac Racing and enjoys ever more experience with the Italian machine, also proving his mettle in testing. The holeshot heroes have some serious top speed and three experienced riders who look ready, on paper, to get straight in the mix.

The timesheets in testing were far from a one-trick pony though. Three Yamahas ended the test within less than a tenth and a half of Miller at the top: Maverick Viñales (Monster Energy Yamaha MotoGP), Fabio Quartararo (Monster Energy Yamaha MotoGP) and last year’s Championship runner up Franco Morbidelli (Petronas Yamaha SRT). Viñales starts the year settled in, Morbidelli likewise. Quartararo switches to the factory Yamaha squad, but seems to have immediately found his footing. So too has nine-time World Champion Valentino Rossi at Petronas Yamaha SRT as the legendary Italian – never one to push for a stunner in testing but still near the top ten – was full of enthusiasm after the five days on track that prefaced the season. After a 2020 of highs and lows for the Iwata marque, and Ducati to an extent, are the two factories who took testing by the horns the two who arrive into the first Grand Prix ready to do the same in race trim?

Just behind them, sixth in testing saw Aprilia come to the fore. Aleix Espargaro (Aprilia Racing Team Gresini) put the Noale factory’s nearly all-new bike right up there every time he went out on track, and increasing expectation has so far been backed up by ever-increasing pace. What can the number 41 do once the lights go out? With teammate Lorenzo Savadori coming back from injury and also a rookie, Espargaro is the man in the spotlight for the new bike as racing gets underway in earnest. We’ve seen flashes of brilliance, but the 2021 aim for Aprilia will be to sustain that.

And then there’s Suzuki. Seventh and eighth was where reigning Champion Joan Mir and Suzuki Ecstar teammate Alex Rins ended the Qatar Test, and the feedback was positive. Consistently fast and consistently threatening in 2020, nothing in testing said Suzuki won’t be out the blocks to defend both the riders title and the teams’ Championship. The Hamamatsu factory’s Achilles heel – if such a thing exists in a season of such success – was qualifying last season, so that may be the first thing to keep a keen eye on as Saturday arrives. It seems though that nothing big to report may translate into “yes, we very much require the Jaws music once the lights go out for racing”… with test rider Sylvain Guintoli already having been working on their 2022 engine during the Qatar Test. If that’s not a mark of feeling everything is under control…

As race weekend arrives, meanwhile, we will be left waiting for the answer to one of the biggest questions: when will Marc Marquez return? Sidelined by injury after Jerez last year, it’s been a long, long road of surgery and recovery for the eight-time World Champion but the signs are looking good. Recently on track on a Honda RC213V-S in Catalunya and Portimão and looking ever more ready to race, there was certainly more than enough to make a good few rumours. His return won’t be in Qatar, however, so the foreboding music for his rivals remains on low for now.

On the other side of the Repsol Honda Team garage there’s plenty to talk about too though. Pol Espargaro joins the fold and, after an impressive trajectory over the past couple of seasons, began 2021 with an equally impressively quick adaptation to the Honda. Fast and fast often, the Spaniard was tenth overall in testing and could be a dark horse for much further forward as the race weekend begins, with each session of track time only giving him more experience of his new bike and team. Premier class podium finisher? Check. Race winner is the next goal.

LCR Honda Idemitsu’s Takaaki Nakagami will be hoping to move forward too after a slightly more muted test, as both he and new teammate Alex Marquez (LCR Honda Castrol) suffered a few crashes – the latter also injuring his foot but ready to head back out for Round 1. Both fought for podiums last year and Alex Marquez successfully, as a rookie no less, so they’ll want to move back up the field to where they’d left off last season.

That’s also true of KTM. The Austrian factory ripped up the history books and wrote a few replacements in 2020, with Brad Binder (Red Bull KTM Factory Racing) winning them their first MotoGP™ race – and his, as a rookie and the first premier class winner from South Africa – and new teammate Miguel Oliveira then adding two more MotoGP™ victories for KTM as well as becoming the first Portuguese premier class winner. Oliveira, now alongside Binder in the Red Bull KTM Factory Racing team, was the fastest Austrian machine in testing, but the two were side by side in P16 and P17. They’ll want more once the lights go out as KTM look to continue their roll of incredible success, but we’ve said it before and we’ll say it again: testing is testing. Friday practice, qualifying and then finally the first race of the year are often a wiser litmus test.

Iker Lecuona (Tech3 KTM Factory Racing) will be looking for more this year too as he starts his second season, needing to move up from where he ended testing, and new arrival Danilo Petrucci (Tech3 KTM Factory Racing) will be interesting to watch too as he adapts to his new bike.

Speaking of adaptation, there’s also plenty to keep an eye out for as the Moto2™ graduates begin their first seasons, eager to get in the mix. Savadori is a rookie but with a few events under his belt by now, whereas the trio of rookies moving up from the intermediate class tasted MotoGP™ for the very first time in the Qatar Test. The fastest of the three was Jorge Martin (Pramac Racing) in 14th, but it was incredibly close as reigning Moto2™ World Champion Enea Bastianini (Avintia Esponsorama) was just 0.022 further back. Luca Marini (Sky VR46 Avintia) was a little more in arrears but also impressed, and just like those adapting from one factory to another… every session is just another chance to improve.

The stage is set, the floodlights are primed and the grid is ready to start another rollercoaster season of incredible racing with the Barwa Grand Prix of Qatar. Don’t miss it, with lights out for the first MotoGP™ race of 2021 at 20:00 (GMT +3). Let’s GO!

MotoGP™ Qatar Test top five:

1 Jack Miller – Ducati Lenovo Team – Ducati – 1:53.183

2 Maverick Viñales – Monster Energy Yamaha MotoGP – Yamaha – +0.061

3 Fabio Quartararo – Monster Energy Yamaha MotoGP – Yamaha – +0.080

4 Franco Morbidelli* – Petronas Yamaha SRT – Yamaha – +0.140

5 Francesco Bagnaia – Ducati Lenovo Team – Ducati – +0.261

*Independent Team rider
 

 

Too close to call? Moto2™ gears up for 2021

Lowes, Bezzecchi and Gardner headline an all-star cast in the intermediate class

If testing taught us anything ahead of the Barwa Grand Prix of Qatar, it’s that Moto2™ is almost too close to call. Day 2 saw six riders within 0.089, and on Day 3 the top three were split by just half a tenth – giving a whole host of names the right to call themselves contenders. So let’s take a look at a few, but by no means all.

The fastest man in Qatar so far in 2021 is Sam Lowes (Elf Marc VDS Racing Team). The 2020 title challenger looks ready to pick up where he left off and you could likely call him the favourite. By far the most experienced of the quickest riders in testing, Lowes is in good shape for an assault on the crown and in a better position than this time last year when he missed the Qatar GP due to injury – and then he still took the fight all the way down to the wire…

Marco Bezzecchi (Sky Racing Team VR46), meanwhile, lurks just thousandths further back. The Italian also fought for the crown for much of the latter half of last season and became a Moto2™ race winner before a few mistakes derailed his final challenge. But mistakes can be a useful thing to a rider on a mission, because they teach lessons – and Bezzecchi has certainly proven himself a fast learner and a fast rider.

The same could be said of Remy Gardner (Red Bull KTM Ajo). The Australian has shown flashes of blazing pace and talent but sometimes peppered with mistakes or simple bad luck – including some serious injury struggles. Going into 2021, however, he’s with one of the most successful teams in the class and turned some good 2020 momentum into even more in pre-season testing. One of the quickest and most consistent in Doha so far, is this the moment it all starts to come together for Gardner? One thing’s for sure: the Aussie will push as hard as possible trying to make sure it does.

So who else looks threatening? Aron Canet (Inde Aspar Team) was a big presence on the timesheets on Friday and Saturday in testing and seems like he’s made another step forward to build on an impressive rookie season. Xavi Vierge (Petronas Sprinta Racing) had some serious speed too, and his teammate Jake Dixon – despite having been told his injury woes could even threaten his career – was another who seemed to have unlocked something even more as we begin 2021. Bo Bendsneyder (Pertamina Mandalika SAG Team) also seemed to have made a step forward. Now on a Kalex and with more experience under his belt, the Dutchman impressed in the test and could be one to watch. And what about Joe Roberts? The American moves to Italtrans Racing Team for 2021 and, after a stunner in Qatar last year, will want to start his new chapter in similar form.

It wouldn’t be a new year without some fresh faces either. Raul Fernandez (Red Bull KTM Ajo) flew the rookie flag the highest in the test as he immediately looked like a seasoned campaigner. Easily in the top ten and fastest rookie throughout, just that bit more – that he’ll be focused on finding in practice – could see him really start to challenge the more established names ahead of him too. Reigning Moto3™ World Champion Albert Arenas (Inde Aspar Team) moved up into the top ten on Day 3 too, and his old lightweight class sparring partners weren’t so far behind as Tony Arbolino (Liqui Moly Intact GP) and Ai Ogura (Idemitsu Honda Team Asia) also look to be settling in well. American Cameron Beaubier (American Racing) made solid progress too as he adjusts not from Moto3™ but MotoAmerica… and his rate of knots moving up the timesheets day by day was testament to progress. Who will strike first in the battle of the rookies, and will they take any veteran scalps along the way?

We’ll find out soon enough as the first battle – and the first Championship leader – is decided in the Barwa Grand Prix of Qatar. Moto2™ saddle up at 18:20 local time (GMT +3), with the first 25 points – and bragging rights – up for grabs.

Moto2™ Qatar Test top five:

1 Sam Lowes – Elf Marc VDS Racing Team – Kalex – 1:58.655

2 Marco Bezzecchi – Sky Racing Team VR46 – Kalex – +0.013

3 Remy Gardner – Red Bull KTM Ajo – Kalex – +0.048

4 Xavi Vierge – Petronas Sprinta Racing – Kalex – +0.177

5 Jake Dixon – Petronas Sprinta Racing – Kalex – +0.182

 

 

Veterans vs rookies: Moto3™ gets ready to rumble

Masia, Foggia, McPhee, Binder, Rodrigo; the veterans were up there in testing. But then there are the rookies…

What’s the perfect way to end the last day of testing? Probably something like Jaume Masia’s (Red Bull KTM Ajo) new – although unofficial – lap record. The Spaniard seems pretty settled in at Red Bull KTM Ajo already, and his warning shot will likely be heard by his rivals. But then, so too will that of new teammate Pedro Acosta. So is this season going to begin a clash of the rookies and veterans?

Masia’s lap was certainly a stunner, but we already know that Moto3™ is rarely a runaway game at the front and the likes of Dennis Foggia (Leopard Racing), John McPhee (Petronas Sprinta Racing), his new teammate Darryn Binder – adapting well to the Honda – and Gabriel Rodrigo (Indonesian Racing Gresini Moto3) won’t go down without a good few classic lightweight class battles. We also know that the rookies this year have hit the ground running in a way we’ve not seen for some time.

Acosta is one – the 2020 Red Bull MotoGP Rookies Cup winner second in testing behind only his teammate – and Izan Guevara (GasGas Gaviota Aspar Team) another as the reigning FIM Moto3™ Junior World Champion blazed out the blocks with some serious speed. What makes their performances all the more impressive is that they don’t know the track like they do some of the venues in Europe, and that’s something else to maybe make a few a little nervous later in the season. But for now, what is too much to ask? Wins? Podiums? They certainly have the speed, but the tactics will be a key test – as will holding their nerve.

That said, it’s been some time since this pedigree of CV has been on show. Both the FIM Moto3™JWCh and Rookies are known proving grounds and two of the most successful programmes on the Road to MotoGP™, but both Acosta and Guevara have even more in their track records. Acosta absolutely dominated the Rookies, which has been done before, but he also backed it up with race wins in the FIM CEV Repsol as he came third overall in the aforementioned FIM Moto3™ JWCh. Guevara, meanwhile, just can’t stop progressing. European Talent Cup winner in 2019, the Spaniard then moved to the FIM Moto3™ JWCh and by Jerez mid-season was almost unbeatable on his way to the crown. At Aragon, he won all three races – riders have done that before, a good match between man, machine and venue can create a little magic – only, after a nightmare qualifying, Guevara managed it three times in a row from outside the top 20 on the grid. Convinced yet?

Xavier Artigas (Leopard Racing), meanwhile, may not have been quite as near the front as his rookie compatriots, but he’s also already got a Grand Prix podium as he took to the rostrum on a wildcard in Valencia in 2019, too. On his first Grand Prix appearance. He ended the test in 11th, only just behind Darryn Binder, and shouldn’t be overlooked either after a season at the front in the FIM Moto3™ JWCh too – he’s the man who lost out on the crown to Guevara, losing a little momentum but after most definitely having done more than enough to impress regardless.

The timesheets gave us plenty to be excited about in testing. The lightning speed of the rookies and the aforementioned veterans alike, as well as riders like Romano Fenati (Sterilgarda Max Racing Team) and 2020 Rookie of the Year Jeremy Alcoba (Indonesian Racing Gresini Moto3) and their consistent pace. Who will take the first flag of the year in Moto3™? We’ll find out soon, after another 18 laps of wonderful lightweight class chaos.

Tune in for the Moto3™ race at the Barwa Grand Prix of Qatar at 17:00 (GMT +3) on Sunday the 28th of March.

Moto3™ Qatar Test top five:

1 Jaume Masia – Red Bull KTM Ajo – KTM – 2:04.263

2 Pedro Acosta – Red Bull KTM Ajo – KTM –  +0.306

3 Dennis Foggia – Leopard Racing – Honda – +0.440

4 Izan Guevara – GasGas Gaviota Aspar Team – GasGas – +0.455

5 Gabriel Rodrigo – Indonesian Racing Gresini Moto3 – Honda – +0.527

M4 ECSTAR Suzuki Names Supersport & Stock 1000 Riders

Sean Dylan Kelly (40). Photo courtesy Suzuki Motor of America, Inc.
Sean Dylan Kelly (40). Photo courtesy Suzuki Motor of America, Inc.

Suzuki Announces M4 ECSTAR Suzuki’s Supersport & Stock 1000 Riders for 2021

M4 ECSTAR Suzuki will field Sean Dylan Kelly and Sam Lochoff in the 2021
MotoAmerica Supersport Series, Wyatt Farris to compete in Stock 1000.

Brea, CA (March 23, 2021) – Suzuki Motor of America, Inc. announces the return of Team Hammer as its official road racing partner for the 2021 MotoAmerica AMA/FIM North American Road Racing Series. Team Hammer will field Supersport class riders using Suzuki GSX-R600s for 2021. The team returns to the 2021 MotoAmerica series as Team M4 ECSTAR Suzuki.

Riding for M4 ECSTAR Suzuki Supersport athletes include Sean Dylan Kelly and South Africa’s Sam Lochoff; who joins the team’s 600 class effort for 2021. Wyatt Farris joins M4 ECSTAR Suzuki competing in the Stock 1000 class on a GSX-R1000.

 

M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.
M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.

 

Florida’s Sean Dylan Kelly returns to Team Hammer for a third year in 2021.  SDK finished second in the 2020 Supersport Championship, having scored consistent podium finishes along with five Supersport class victories in 2020. Kelly enters 2021 with an abundance of momentum gained from a dominating pole position performance and strong second place finish in the 79th running of the legendary Daytona 200 recently at Daytona International Speedway.

 

18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.
18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.

 

Newcomer Sam Lochoff turned heads by landing on the podium in his MotoAmerica debut in 2019, finishing third in the Junior Cup season-opener. Following an abbreviated rookie season in 2019, Lochoff made his presence felt in 2020, earning 13 podium finishes — including five runner-up finishes, en route to an overall third place ranking in the 2020 MotoAmerica Junior Cup Championship.

 

Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.
Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.

Also new to M4 ECSTAR Suzuki is Wyatt Farris, joining as the team’s Stock 1000 rider for 2021.  Farris, from Calistoga, CA, is an experienced AMA Pro/MotoAmerica competitor, earning nine AMA Pro/MotoAmerica podium finishes, and taking third in the 2014 AMA Pro Supersport Championship. He finished a strong third in the 2016 Daytona 200. In 2017 he won the overall AFM Championship, was second in 2019, and topped the AFM overall points again in 2020.

In 2021, Team Hammer embarks on its 41st consecutive year of operating as an elite professional road racing team. In addition to an impressive list of accomplishments in various national and international motorcycle road racing championships, Team Hammer’s success at the AMA Pro and MotoAmerica National level is exceptional.

Team Hammer has earned an accumulated nine AMA Pro and MotoAmerica National titles while racking up 108 race victories and 291 podium finishes in multiple MotoAmerica Championship classes, AMA Formula Xtreme, AMA 750cc Supersport, and AMA Pro Daytona Sportbike series championships as well.

Along with an exceptional record of preparing, developing, and fielding championship-caliber equipment, Team Hammer is known for its consistent ability to identify and foster road racing athletes, whether they be up-and-coming riders, overlooked international competitors, or established veterans looking to reignite their careers with Team Hammer.

M4 ECSTAR Suzuki will debut its full team lineup on March 30-31 at the 2021 MotoAmerica Official Test at Circuit of the Americas in Austin, TX.

Phase Two Of Triumph Electric Motorcycle Development Completed

The styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

PROJECT TRIUMPH TE-1

CREATING UK ELECTRIC MOTORCYCLE CAPABILITY

PHASE 2 – POWERTRAIN PROTOTYPE

With the exciting reveal of the innovative advanced electric powertrain and battery and the first styling sketches for the final Project TE-1 Prototype, Phase 2 of this landmark four phase collaboration in British design and engineering reaches a successful conclusion.

Delivering on the objectives announced at the start of the TE-1 project in May 2019, focused on developing specialized electric motorcycle technology and innovative integrated solutions, this unique collaboration between Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd, and WMG at the University of Warwick funded by the Office for Zero Emission Vehicles, has already achieved significant results.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle showing the motorcycle plugged into a charging cable. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle showing a charging cable plugged into the bike. Image courtesy Triumph.

 

Including innovation in battery and powertrain design, initial test performance results far exceed the current benchmarks and industry targets. Developments in performance, efficiency, and range is enabling Project TE-1 to fully deliver the partnership’s objectives to enhance the credibility and profile of British industry providing substantial input into the future electric motorcycle strategy from Triumph.

 

  • Announcing the completion of Phase 2 – The reveal of the battery and powertrain prototype, initial high level performance results, and the first design concept drawings for the Project TE-1 Prototype motorcycle that will be created at the end of the next phase.

 

  • Key project achievements to date – Test results show significant innovation in mass, battery technology, and powertrain performance that exceeds the target set by the UK Automotive Council for 2025, meeting the project’s ambitious objectives to deliver genuine innovation for a new standard in fully usable electric motorcycle performance.

 

  • Project TE-1 is a unique collaboration between four major UK industry and academic leaders – Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd.’s
    e-Drive Division, and WMG at the University of Warwick

 

  • The objective of this two-year project is focused on developing electric motorcycle capabilities – It will provide an input into Triumph’s future electric motorcycle offer, drive innovation, capability and new intellectual property, and enhance the credibility and profile of British industry and design.

 

  • Project TE-1 is funded by the UK Government’s Office for Zero Emission Vehicles (OZEV), and delivered through Innovate UK

 

A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.
A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.

 

“The completion of Phase 2, and the promising results achieved to date, provide an exciting glimpse of the potential electric future and showcase the talent and innovation of this unique British collaboration. Without doubt the outcome of this project will play a significant part in our future efforts to meet our customer’s ambition and desire to reduce their environmental impact and for more sustainable transportation.” said Nick Bloor, Triumph CEO. “This important project will provide one of the foundations for our future electric motorcycle strategy, which is ultimately focused on delivering what riders want from their Triumph; the perfect balance of performance, handling, and real-world usability, with genuine Triumph character.”

 

PROJECT TE-1 – PHASE 2 OUTCOMES

Battery and powertrain prototype

Williams Advanced Engineering (WAE)

Based on the agreed specification, we identified appropriate cell technology and battery architecture to deliver the performance objectives. Using this as a framework, we then optimized the battery module layout to balance mass and positioning within the prototype chassis, taking into consideration center of gravity, space, and relationship with the powertrain and charging approach.

In addition to the module layout, we have also developed a new and unique vehicle control unit which is integrated into the battery pack to minimize weight and packaging. In parallel, WAE has also created innovative battery management software to ensure power is delivered in relationship to battery performance.

The outcome of Phase 2 for WAE includes a fully bench-tested battery with performance results that exceeds anything else on the market in terms of Power and Energy Density.

 

Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.
Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.

 

“We are delighted to be working on this project, working to deliver next-generation battery technology and control systems. Within the current landscape, most electric motorcycle technology arguably delivers compromised performance at low levels of battery charge. By using a lightweight, compact solution, we have been able to give the rider all of the performance all of the time (regardless of battery charge), and a class leading range. We have focused on pushing the boundaries to reduce mass and optimize frame position to benefit handling. We have also pushed the limits of battery performance, balancing the design for acceleration and range, with simulations modelled on track-based riding. In other words, as aggressive as possible,” said Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. “The energy density of this new battery will be a significant step forward from existing technology giving the rider more power, for longer. WAE has also designed and developed an electronic control unit from the ground-up, combining the battery management system with the bike control functions in one package. This is a first for this market, benefiting packaging and integration while optimizing performance and range.”

 

Integral Powertrain Ltd.’s e-Drive electric motor/invertor unit from the right side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit from the right side. Photo courtesy Triumph.

 

Integral Powertrain Ltd.’s e-Drive Division

Our experience in cutting edge motor and inverter design and manufacture has helped us to push this technology on to the next level for the TE-1 project. In Phase 1 we worked to integrate the normally separate motor and inverter into one single, compact package. Integration reduces the mass and volume of the drivetrain by reducing additional boxes on the vehicle, mounting features, coolant pipework, and heavy high voltage connections.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.

 

The innovative integration concept is also a fully scalable one, whereby the number of power stages can increase for larger diameter, higher torque motors for example. Combined with our state-of-the-art motor technology, we have seen very exciting results already, with the motor achieving a power density twice that of the target set by the UK Automotive Council for 2025.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.

 

We have also implemented advanced silicon carbide switch technology in the inverter. This reduces losses in the inverter and results in greater drivetrain efficiency, power delivery, and range. At the end of Phase 2, we are proud to have built a fully operational, new prototype motor that has been bench tested and is delivering on all aspects of performance.

 

Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.
Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.

 

“One of the most influential factors in how well a motorcycle handles and performs is mass, so at Integral Powertrain we have focused heavily on making a step change in motor and inverter design, removing heavy high voltage cables for example. This delivers a product that is significantly more compact and lighter than anything currently available on the market. The motor produces almost 180 horsepower (130kW), but weighs only 22 pounds (10 kg), much lighter than existing technology and clearly a small fraction of the mass of traditional internal combustion engines.” said Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. “The silicon carbide switch technology in our new scalable integrated inverter will help set new standards in terms of electric motorcycle efficiency; application of this technology means a lighter weight overall with significantly more performance and range. In parallel, we have a very strong focus on design for manufacture and assembly activity, so that all this high motor and inverter performance can be offered cost-effectively. Ultimately, this is really going to be an industry-leading powertrain that will help define the future of electric mobility. With the TE-1 project we are proud to be part of this landmark project for British industry.”

 

WMG, at the University of Warwick

At WMG we have been working closely with all the TE-1 partners during Phase 1 and 2 to develop representative models to simulate the systems of the bike including battery, motor, and vehicle control. Initially this allowed us to validate the specification against the intended component selection by assessing performance criteria such as range and top speed with initial models. This has enabled Triumph to carry out software development at an early stage prior to hardware being built with thorough testing programs to ensure that real-life testing can deliver on refinement. Most recently we have been conducting powertrain rig testing using the prototype IPT powertrain to ensure our simulations are accurate and to confirm that the motor functions within the system as intended. We have also been providing guidance to Triumph relating to future legislation, charging infrastructure and recycling strategies that will need to be implemented across future electric motorcycle platforms.

 

The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.
The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.

 

“Our creation of initial computer-based simulation models at the start of Phase 1 has been instrumental in ensuring that the component selection was appropriate to achieve the performance targets defined by the partners for the TE-1 Prototype. We have continued with this work across Phase 2 of the project, refining the models to a much more complex level to allow us and the partners to imitate further components on the bike such as braking, throttle, lighting and other systems and mimic real-world riding to provide development opportunities before components were fully designed. Additionally, we have created a physical rig wired with all the control units, to implement a design validation test program to ensure the function of each section was within the allowable range.” said Truong Quang Dinh, Assistant Professor of Energy Management and Control Systems at WMG, University of Warwick.

 

Triumph Motorcycles

Throughout Phase 2 Triumph have developed an all-new advanced vehicle control software which incorporates all the electrical systems to ensure intuitive throttle response, regen braking, traction control and all of the dimensions that a customer would expect from a high-performance Triumph motorcycle. Additionally, we have integrated leading functional safety strategies into this software, plus supported WMG in rig testing and have also fully developed the new prototype instrument display. Alongside this electrical and control system work, we have designed a brand-new prototype chassis including main frame and rear frame which have been optimized alongside the battery and motor packages which will be further evolved in Phase 3 into the TE-1 Prototype which will be used as a mule test platform in Phase 4. During this chassis development we have taken into account both the transmission design and the final styling of the TE-1 Prototype, the drawings of which we are pleased to reveal for the first time today.

 

Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.
Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.

 

Steve Sargent, Triumph’s Chief Product Officer said “The starting point for us in the TE-1 project was to gather important customer feedback about what riders really want from their motorcycles and understand how an electric motorcycle can provide the experience that riders desire. This includes considering the type of riding, range, feel and nature of power and torque delivery together with the ergonomics and bike controls. Taking all this feedback into consideration we began the chassis design, focusing on bringing everything together on the TE-1 Prototype in a way that provides a riding experience that is exciting and new, but ultimately familiar. We have begun to define the powertrain and battery interaction through the use of software refinement to deliver an exhilarating power delivery and throttle response, which provides great control and feels intuitive to the rider. Overall, with the styling we wanted to create something that is fresh and exciting but a natural evolution of the Triumph brand. Something desirable in its own right, with distinctive Triumph DNA and definitely not something that is different just for the sake of being different. Pulling all of this together with the partners we are thrilled to see the progress of such an exciting demonstration vehicle which incorporates the cutting-edge technology needed to guide the strategy for the future roadmap of electric motorcycles from Triumph. The team are proud to be leading such an innovative, strong and dynamic project with a fantastic group of partners which ultimately should set British engineering and design rightly at the forefront of future 2-wheel design.”

  

PROJECT TE-1 OVERVIEW

Project TE-1 collaboration – Triumph Motorcycles, industry experts, academic leaders, and UK Government

 Project Triumph TE-1 is a ground-breaking collaboration between Triumph Motorcycles and the UK’s electrification experts, each of whom is focused on creating innovations in their own areas:

 

  • Triumph Motorcycles is leading the project, providing advanced motorcycle chassis design and engineering expertise, manufacturing excellence and pioneering functional safety systems, as well as defining electric drivetrain power delivery characteristics.

 

  • Williams Advanced Engineering is providing industry-leading lightweight battery design and integration capability, using its test and development facilities to deliver an innovative battery management system combined with vehicle control unit.

 

  • Integral Powertrain Ltd.’s e-Drive Division is leading the development of bespoke power-dense electric motors and a silicon carbide inverter, integrating both into a singular motor housing.

 

  • WMG, at the University of Warwick is providing electrification expertise, and the critical vision to drive innovation from R&D to commercial impact, through modelling and simulation based on future market needs.

 

  • The Office for Zero Emission Vehicles (OZEV) is a team working across government to support the transition to zero emission vehicles, as well as funding to support chargepoint infrastructure across the UK. This will contribute to economic growth and will help reduce greenhouse gas emissions and air pollution on UK roads. OZEV is part of the Department for Transport and the Department for Business, Energy and Industrial Strategy.

 

  • Innovate UK is the government’s research and innovation agency that supports business led R&D funding and UK business growth.

 

A two-year project focused on developing technical innovation and advanced electric motorcycle capabilities

 The project is organized into four main phases, with one of its key aims being increased systems integration. By developing individual components of automotive-based electric drivetrains and optimizing them into innovative combined units, the project aims to deliver sophisticated electric motorcycle systems which reduce mass, complexity, and package requirements.

Triumph Motorcycles is working alongside the partner organizations to accelerate joint expertise in the packaging and safety of batteries, optimum electric motor sizing and packaging, the integration of braking systems including regenerative braking, and advanced safety systems. The innovation and capabilities developed in these areas will input into Triumph’s future electric motorcycle strategy.

The Project Triumph TE-1 partnership, with the support of the Office for Zero Emission Vehicles and Innovate UK, is focused on facilitating the creation of:

  • Electric motorcycle capability that meets the needs of customers seeking lower environmental impact transportation, delivering against the UK’s focus on reducing emissions
  • Strong, commercially viable, and sustainable partnerships with UK industry manufacturers
    and supply chains
  • Expertise and capability within the UK workforce, creating jobs and a talent base that both ensures sustainable employment and drives the UK’s reputation and influence on the world stage.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Dr Francesca Iudicello CEng MIMechE – Program Manager – Automotive Zero Emission Vehicles – Innovate UK

“Innovate UK has worked in close partnership with the Office of Zero Emission Vehicles to deliver the integrated delivery program since 2013. This provides funding to ground-breaking innovation in the automotive sectors for zero emission vehicle technologies from proof of concept to vehicle demonstration.

The TE-1 project is a part of this program under the IDP15 competition and is aligned with the road to zero policy and marks an important milestone towards zero emission vehicles and the race to net zero.

We are proud to have delivered the funding for this project which is a pioneering project for the zero-emission vehicle motorcycle manufacturing in the UK as it has successfully developed, thanks to a very talented group of innovators, the very first Triumph electric motorcycle in a very quick development time and prepared the groundwork for the future of electric motorcycles.”

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Jon Bray – Research & Development (R&D) Lead – Office for Zero Emission Vehicles

“Investment in Research and Development is key to our mission of putting the UK at the forefront of the design, manufacture, and use of zero emission vehicles. By supporting these technologies, we are helping to deliver our road transport decarbonization goals, while anchoring economic activity across the UK, which will support the green recovery in the wake of the pandemic.

This is why the Office for Zero Emission Vehicles continues to design and fund a series of R&D competitions, which support UK innovation in developing zero emission vehicle and charging infrastructure technologies.

Triumph’s TE-1 project is part of our diverse R&D portfolio of ambitious electrification projects, which are addressing challenges in line with our accelerated phase-out ambitions of petrol and diesel cars and vans and electric vehicle commitments in the Prime Minister’s Ten Point Plan.

We are excited to see that our funding is supporting Triumph Motorcycles in driving forward innovation and capability in the electric motorcycle space, while fostering collaboration between several pioneering UK companies”.

Melissa Paris Reviews Suzuki Katana Accessories, In The March Issue

The Suzuki Katana as it looked fitted with selected official Suzuki accessories. Photo by Bob Scholten.

Featured In the March 2021 issue of Roadracing World:   

     “We started by installing a slightly taller-than-stock version of what Suzuki calls a ‘meter visor,’ and it took just over five minutes. All the necessary hardware is included along with detailed instructions, which is pretty impressive considering the entire procedure is simply removing four bolts, swapping the visor, and reinstalling with four bolts.

      “The added wind protection will be nice for anyone who spends time on the highway while still retaining a clean, OE look…” 

—Product Evaluation: Suzuki Katana Accessories, by Melissa Paris.

 

            The Product Evaluation we did on official accessories for the Kawasaki Z900RS retro bike proved popular, so we’re now looking at official Suzuki accessories for the latest version of the Katana. We enlisted the help of experienced racer and race mechanic Melissa Paris. It’s all in the latest issue of Roadracing World!

 

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

PREVIEW the March 2021 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW . Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday. Read the March 2021 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world

 

MotoAmerica: Escalante Defending Supersport Title

Richie Escalante (54). Photo by Brian J. Nelson.
Richie Escalante (54). Photo by Brian J. Nelson.

MotoAmerica Supersport Champion Richie Escalante will defend his title on a Kawasaki ZX-6R in 2021.

According to a press release, Escalante and his HONOS Racing team are joining forces with Hudson Valley Motorcycles’ (HVMC) Corey Alexander, who is returning to the MotoAmerica Stock 1000 and Superbike Cup classes on a new, 2021-model Kawasaki ZX-10RR.

 

Corey Alexander (23). Photo by Brian J. Nelson.
Corey Alexander (23). Photo by Brian J. Nelson.

 

In addition, Escalante’s 2020 teammate Jorge Ehrenstein will compete in selected MotoAmerica Supersport rounds.

The team will be known as HONOS HVMC Racing.

“This new partnership allows for better utilization of technical and logistical resources whilst offering a more substantial presence in the series both on & off the racetrack,” read a press release issued by the new HONOS HVMC Racing team. “Similarly to the 2020 season the team will continue to utilize Graves Motorsports technical staff, resources, and expertise to harness the strongest performing Kawasaki machinery in the MotoAmerica paddock.”

Escalante is sponsored by HJC Helmets, Vircos Leathers, Alpinestars, Fresh N Lean, Electrolit, Royal Assets, 5ta Raiz, and Strats & Legal.

Alexander is sponsored by Tucker, Optimum Support Group, Prestige Services Group, FA Madden Painting LLC, Freeman Racing, Four3 Performance Lab, FTA Embroidery, Ikoniqa, and Gemini Racing.

 

Aprilia Racers Days Track Program Coming To U.S. & Canada In 2021

Roadracing World Racing Editor Chris Ulrich riding an Aprilia RS 660 at Circuit of The Americas (COTA). Photo by Kurt Bradley.

APRILIA 2021 “APRILIA RACERS DAYS” TRACK PROGRAM TO COVER U.S. AND CANADA

THE INITIATIVE GROWS TO NINE CIRCUITS ACROSS NORTH AMERICA, CONTINUING TO PROVIDE THE BEST ON-TRACK EXPERIENCES FOR THE MOST ENTHUSIASTIC AND DEMANDING SPORTBIKE RIDERS WITH SUPPORT FROM THE OFFICIAL PARTNER PIRELLI, DAINESE, AND AGV.

NEW YORK, NY – MARCH 22, 2021 – Aprilia USA and Aprilia Canada are pleased to announce the 2021 dates for the Aprilia Racers Days program, taking place at 9 circuits across North America, where enthusiasts are welcomed to join in an intimate track day experience,  with the opportunity to ride the latest models from Aprilia.

Aprilia Racers Days will showcase the latest 660 platform with RS 660 and Tuono 660 models from the start, and will include the brand new 2021 RSV4 starting April, and Tuono V4 shortly afterward. The Manufacturer-led activity will host the track experience across seven US tracks, and for the first time, the addition of event dates in Canada. This year’s program is the biggest to date, focusing on premier circuits across North America.

 

 

EVENT DETAILS:

 

Buttonwillow Raceway Park

Monday, March 29, 2021

24551 Lerdo Hwy, Buttonwillow, CA

 

Circuit of The Americas

Monday, May 3, 2021

9201 Circuit of the Americas Blvd, Austin, TX

 

WeatherTech Raceway Laguna Seca

Monday, May 17, 2021

1021 Monterey Salinas Hwy, Salinas, CA

**JP43 Training Available

 

Virginia International Raceway (South Course)

Monday, May 24, 2021

1245 Pine Tree Rd, Alton, VA

*Following MotoAmerica Weekend

**JP43 Training Available

 

Pittsburgh International Race Complex

Monday, June 7, 2021

201 Penndale Exd, Wampum, PA

 

Ridge Motorsports Park

Monday, June 28, 2021

1060 W Eells Hill Rd, Shelton, WA

*Following MotoAmerica Weekend

**JP43 Training Available

 

Calabogie Motorsports Park

Monday, August 16, 2021

462 Wilson Farm Rd, Calabogie, ON

 

Shannonville Motorsports Park

Monday, August 23, 2021

7047 Old Highway 2, Shannonville, ON

 

Barber Motorsports Park

Tuesday, September 21, 2021

6040 Barber Motorsports Pkwy, Birmingham, AL

*Following MotoAmerica Weekend)

 

For More Information: http://www.aprilia.com/

Tickets Available at: https://storeusa.aprilia.com

 

Aprilia Racers Days events will be supported directly by Aprilia trained technicians and product specialists, as well as partners Pirelli, Dainese and AGV to offer the best on-track experience with expert advice, performance and protection. The cost of participation in the events will not only qualify for an incredible track day experience with your existing motorcycle, but also include a VIP Aprilia Racers Days package, with ability to demo a new Aprilia for one of the track day sessions, equipped with Pirelli performance tires. Additionally, activities will include coaching, event photography, and an included lunch. Attendees will also have the ability to be measured for a custom suit from Dainese and try out the latest track suits as well as helmets from AGV.

New for 2021 will be the inclusion of a racing school in collaboration with Jason Pridmore’s JP43 Training, offering individual instruction to riders looking to become better, safer, and more proficient in their motorcycling skills, both on and off track. Limited to a handful of riders, at a premium to the standard price at select Aprilia Racer Days events (Laguna Seca, VIR, The Ridge), JP43 Training will provide a customized program for participants, giving an unmatched level of instruction to enhance individual understanding of the machine and riding technique, in order to  increase rider knowledge, confidence, and help them to achieve their goals, and continue to set new ones.

 

ABOUT APRILIA RACERS DAYS PARTNERS

Using its 17 years as the Official Tire Supplier to the FIM Superbike World Championship, Pirelli developed the DIABLO ROSSO™ CORSA II, an innovative new tire derived from racing and designed for use on the road and track. DIABLO ROSSO™ CORSA II is the first-ever Pirelli motorcycle tire that uses two compounds applied in three zones on the front tire and three compounds applied at five zones on the rear, creating an aggressive combination. Innovative profiles, a new structure and a new tread design allow every rider to follow their leanings.

To learn more about the complete line of Pirelli motorcycle tires, please visit www.pirelli.com.

For each of the events, the latest sport-oriented technical apparel and helmets will be showcased by Dainese and AGV, the leader in protection for moto and dynamic sports, which joins Aprilia Racers Days in 2019 for the first time ever as Official Safety Sponsor. The natural synergy between these two Italian brands – both known for premium products and innovation – brings a new level of excitement to the tour.

At each stop along the tour, Dainese will have master tailors from its Custom Works program available for fittings and consultations, and professionals from Dainese D-Stores will offer a demo fleet of D-Air suits for both men and women and  wide range  of AGV helmets including Pista GP R, Corsa R, Sport Modular, K-5 S, and AX-9 for participants to test on the track.

To learn more about the complete line of Dainese and AGV, please visit the respective websites:

www.dainese.com

www.agv.com

ABOUT PIRELLI

Pirelli was founded in Milan in 1872 and today stands as a global brand known for its cutting edge technology, high-end production excellence and passion for innovation that draws heavily on its Italian roots. With around 30,000 employees, Pirelli is a major player in the tire industry and the only global player focused solely on the Consumer tire market, which includes tires for cars, motorcycles and bicycles. Pirelli is now concentrating on High Value tire markets, delivering innovative tires and developing Specialties and Super Specialties for its comprehensive product portfolio. Pirelli has a long link with motorsport and it sustains its technological excellence by bringing innovations developed within the motorsport arena into its consumer products. The company currently supports over 460 car and motorcycle sport events and has been the exclusive tire supplier to the Formula One™ World Championship since 2011. Such a strong presence in motorsport enables Pirelli to transfer a series of avant-garde solutions to its day-to-day operations providing the final consumer with the maximum levels of performance and safety.

Pirelli Tire North America (PTNA) services North America through its Modular Integrated Robotized System (MIRS) facility and research and development center at its Rome, Georgia headquarters, its state-of-the-art manufacturing plant in Silao, Mexico and its New York City, Montreal and Mexico City sales and marketing offices. The company manufactures, distributes and markets original equipment and replacement tires for export and domestic car/motorcycle applications (US, CA, MX) and Agro/Heavy Truck platforms (MX).

ABOUT DAINESE GROUP

Founded in 1972 by Lino Dainese, true to its mission of advocating and delivering safety in dynamic sports, the Company designs advanced protective head-to-toe gear for motorcycling, winter sports, cycling, horse riding and sailing. In 2007 Dainese acquired the iconic premium sport helmet manufacturer AGV, established in 1947. The new Dainese Settantadue brand, established in 2017, reinterprets the design of historic garments that are a part of the stylistic heritage of the Group, with a contemporary twist. Dainese and AGV products represent the technology frontier in the field of protection for dynamic sports and are used by the world’s top athletes including Valentino Rossi and Sofia Goggia, Olympic Champion and winner of the Downhill World Cup.

MotoGP: Michelin Updates Tire Range For 2021

Franco Morbidelli testing in Qatar. Photo courtesy PETRONAS Yamaha SRT.
Franco Morbidelli testing in Qatar. Photo courtesy PETRONAS Yamaha SRT.

Michelin’s new MotoGP™ range set for race début at Losail

An intensive programme over the winter break has seen Michelin make further improvements to its tyres for the MotoGP™ World Championship. Despite the challenges posed by the Covid-19 pandemic, Michelin Motorsport’s development experts have responded to Dorna Sports’ call for technical stability by building on the range’s existing strengths, with the accent on fine-tuning the tyres’ respective casing/compound pairings. The result is a more streamlined and more versatile range for 2021, along with greater consistency, in perfect keeping with the brand’s ‘Grip made to last’ pledge.

The official test sessions earlier this month saw Michelin complete its groundwork and preparations ahead of this year’s MotoGP™ World Championship which will kick off with two grands prix under the floodlights of Qatar’s Losail International Circuit. With assistance from the state’s government, and in compliance with strict sanitary measures, Dorna Sports has effectively succeeded in organising back-to-back races there, beginning with the Barwa Grand Prix of Qatar on March 28, followed by the Grand Prix of Doha on April 4. In keeping with the tradition that gives the action in Qatar its unique flavour, both clashes will take place after nightfall.

Because of its desert location and the frequent presence of wind-blown sand on the track, Losail International Circuit’s surface is notoriously abrasive and tends to become more slippery as grip levels drop off due to the cooler temperatures encountered after sunset. However, the ability of Michelin’s MotoGP tyres to take these characteristics in their stride has contributed actively to the setting of new fastest-race-lap, shortest-race-duration and top-speed records for the 5.380-kilometre circuit.

 

 

Tyres available for the two Qatar races

MICHELIN Power Slick tyres: SOFT (white sidewall markings), MEDIUM (no markings) and HARD (yellow markings) front and rear. The SOFT and HARD fronts are symmetric, while the MEDIUM front and all three rear options are asymmetric, with a harder compound for the right shoulder due to the circuit’s 10 right-hand turns, compared with just six left-handers. The tyre allocation has also been adapted to the characteristics of the track. Each rider can choose a maximum of 6 SOFT, 5 MEDIUM and 4 HARD tyres for the front and rear.

In the case of poor weather, and subject to their use being authorised by Race Control, SOFT (blue sidewall markings) and MEDIUM (no markings) front and rear MICHELIN Power Rain tyres will also be available (asymmetric rears).

 

Piero Taramasso (Two-Wheel Manager, Michelin Motorsport)

“I am very proud of what Michelin Motorsport’s teams in Clermont-Ferrand and on the ground have achieved. In spite of the difficult circumstances they had to contend with, and working within the existing technical framework, they have succeeded in building on the experience we acquired in 2020 to revisit our MotoGP range in depth. Our pre-season test programme saw us meet our development targets and the results are extremely encouraging. They mean we will be able to provide the riders with a range that is both more streamlined and more versatile, and that in turn will facilitate their bike set-up work. We have also improved consistency by a move to slightly harder compounds, while at the same time maximising grip and overall performance. These gains were praised by our partners at the pre-season test in Qatar where our tyres played a part in the establishment of two new MotoGP records for Losail: that of the fastest lap for the track – which was the work of Ducati Team’s Jack Miller, with a time of 1m53.183s – and that of the highest speed ever reached there when Johann Zarco’s Pramac Racing Ducati was clocked at 357.6kph down the main straight!”

Red Bull Rookies Cup & KTM Add Engineering Apprenticeships

Red Bull MotoGP Rookies in action during Race One at Valencia #1. Photo courtesy Red Bull.
Red Bull MotoGP Rookies in action at Valencia in 2020. Photo courtesy Red Bull.

KTM Young Professionals

Heading into the 15th Red Bull MotoGP Rookies Cup season and hence the 15th year of our partnership with KTM we are excited to be a part of a great new initiative.

The Young Professionals 

As part of their apprenticeship program, KTM are sending two young engineers, Laura Stempfer and Maximilian Götz, to join the Rookies Cup technical staff at the GPs in 2021.

 

Laura Stempfer. Photo courtesy Red Bull MotoGP Rookies Cup.
Laura Stempfer. Photo courtesy Red Bull MotoGP Rookies Cup.

 

Maximilian Götz. Photo courtesy Red Bull MotoGP Rookies Cup.
Maximilian Götz. Photo courtesy Red Bull MotoGP Rookies Cup.

 

KTM are announcing the successful applicants today and this is their statement:

“We are delighted to be expanding the extremely successful partnership with Red Bull with the YOUNG PROFESSIONALS, through which, in addition to the young riders, we are also training the technicians of tomorrow together. With Laura and Maximilian, we will send two highly motivated KTM apprentices to the racetracks with the Red Bull MotoGP Rookies Cup in 2021, they have prevailed from a large number of applicants through good operational and school performance as well as their above-average commitment. With their ready-to-race spirit, the KTM apprentice workshop will be represented in a worthy way.”

Jens Hainbach, KTM Vice President Motorsports Road Racing

This is a perfect match for the Rookies Cup and we are thrilled to see two more teenagers living their dreams.

For more information on career opportunities at KTM, go HERE

MotoGP: Dromo Submits Design For New Hungarian Circuit (Video)

A computer rendering of Dromo's submitted design for the Magyar Nemzetközi Motodrome in Hungary. Image courtesy Dromo.
A computer rendering of Dromo's submitted design for the Magyar Nemzetközi Motodrome in Hungary. Image courtesy Dromo.

Editorial Note: Scroll down to the bottom to watch a video of simulated laps of the proposed track design.

 

THE TRACK

15 corners with 7 complex radiuses will give a lot of character; height changes, cambers and blind crests will do the difference between boys and men; over 5 Km in length with 30% less use of the terrain, avg. speed of over 184 Kph, ideal lap time 1’38.7”.

In terms of safety, the proposed track has been done DroCAS™, the cutting-edge safety simulator for MotoGP and F1. The overall track has been assessed also by Artificial Intelligence algorithms (Transfer Learning + Generative adversarial network) to ensure the level of safety will be state of the art in respect of the actual racetracks.

The proposed layout provides several overtaking chances avoiding the long-straight-hairpin paradigm, that does not encourage multiple-turns battles. The first overtaking hotspot is Turn 1, a very fast bend that provides the opportunity for the battling competitors to stay close to each other up to the second hotspot, Turn 3, that should provide a perfect opportunity to finish the overtaking maneuver. Then, Turn 5, thanks to its generous banking, encourages competitors to try the inside line to pass. This is also the best hotspot for the Inner Loop configuration. After a challenging technical sector from Turn 6 to Turn 11 a new overtaking opportunity opens up at Turn 12. The longest straight of the track then provides the best opportunity to make the most of top speed advantage and complete a pass at the following Turn 14.

 

A computer rendering of Dromo's submitted design for the Magyar Nemzetközi Motodrome in Hungary. Image courtesy Dromo.
A computer rendering of Dromo’s submitted design for the Magyar Nemzetközi Motodrome in Hungary. Image courtesy Dromo.

 

A no-impact design for MotoGP riders, validated with DIL Driving Simulators, will use composite runoffs to complete the safety level with FIM Grade A barriers on the first line of protection and latest FIA debris fences on the second. Full inner and outer service road to help marshalling and track operations is included to connect all points of the racetrack on both sides, also thanks to two underpasses that exploit the elevations changes of the track passing below it in an integrated manner.

Said that, the rideability has been inspired by the best in the World. Far from the modern “Mickey-mouse” circuits, it takes inspiration from the old TT-Assen (dubbed the “University of Motorcycling”) to the classic Suzuka, from the fastest Termas de Rio Hondo to the formidable Philip Island, rider’s favorite.

A unique trait of the proposed layout is the pit-exit solution that, exploiting the uphill Turn 1, passes below it and rejoins the track safely after Turn 2. Being an integral part of the masterplan – and not a thought after patch solution – the proposed pit-exit is not cramped and the turns that compose it are wide and flowing.

The pit-entry after Turn 14 follows a more traditional layout, leaving the track at the safest point available before the pits.

The Long Lap Penalty now required at top-level motorbike events is foreseen safely on the outside of Turn 12.

The CCW (counterclockwise) international Circuit (5050 m length up to 14 m wide, FIM Grade A – FIA Grade 1) can be split in two concentric configurations. A CW inner loop of 1659 m (FIA Grade 3) and a CCW outer loop of 3615 m (FIA Grade 2) that can be run completely independently and concurrently. The shortcuts allowing the track to be split in two separate are designed to minimize or even totally annul the need for barriers re-alignment, providing operational efficiency and savings.

Inside the spaces left by the circuit configurations, and around it, will take place different circuits, some requested and some suggested, to complete the offer of the Magyar Nemzetközi Motodrome.

“A HUMAN CENTERED TRACK: THE BEST EXPERIENCE FOR THE VISITORS, THE BEST EXPERIENCE FOR THE RIDERS”

 

A computer rendering of Dromo's submitted design for the Magyar Nemzetközi Motodrome in Hungary shows the back of the main grandstand/paddock garage complex. Image courtesy Dromo.
A computer rendering of Dromo’s submitted design for the Magyar Nemzetközi Motodrome in Hungary shows the back of the main grandstand/paddock garage complex. Image courtesy Dromo.

 

Why is our design streets ahead than the proposed track layout?

· Iconic and unique design, allow Hungary to be placed on a map with strong recognizability.

· Integrating the main pit building with the main grandstand allows to reduce the construction costs and operations, leaving the spectators to view the whole action on track

· An accurate phasing plan allow to build the first things required to host MotoGP at a great value, leaving the development of all the other facilities to be implemented with the remaining funds.

· Having the paddock external to the track allows to reduce the land usage, the length of the fencing and drainage system, in the end reducing the complexity of the site

· The asphalt is laid more where it is easier to lay, like the parking lots, reducing the highly specialized asphalt on the track through a flowing fast design, more entertaining, and safer

Why is this the best experience for the visitors?

· Because riders will enjoy it, visitors will be entertained, both on site and in television.

· The purpose of the project is to establish the maximum possible connection between the public and the activity of the track, with an approach to the project aimed at ensuring the best experience for the visitor;

· The visitor is always put on a higher level, through an elevated path that surrounds the track and connects all its main functions, and makes it possible for the visitor to have a privileged and more complete view throughout the event, from views of the Paddock to an almost 360° view of the track;

· Green areas and trees are totally integrated both in the system of distributive paths and in the architecture itself, in order to harmonize the project of the circuit with the surrounding landscape and to enrich and enhance the main places of interest of the system, making the circuit a unique biophilic organism;

· We developed a program that could add value on non-event days and mindful of phasing, thinking at the racetrack as a public MOTOR PARK, surrounded by implementable activities like a boutique hotel, private villas and retails spaces, to ensure long-term viability of the event and development;

WHO IS DROMO?

The Dromo project team is built around experts related to the design, engineering, construction, and hosting of motorsport events & other events. The team has experience of conversion of brownfield locations, green field motorsport circuits, and street circuits for cars & motorbikes.

Dromo have delivered designs for some of the world’s most famous iconic racetracks, with respect to enhancements, modifications, redesigns or refurbishment activities inclusive of resurfacing of tracks. The multi discipline team covers architectural, circuit design and master planning services to create motorsport facilities that are truly state of the art. Our extensive use of computer related technology, simulation tools developed in-house,
allows us to simulate multiple circuit solutions, resulting in an experience that’s electrifying for riders, drivers and, crucially, spectators.

Dromo is at the forefront of innovative technological sports destination and racing circuit design. Our research into structure, safety standards and technology means that the facilities we design are state of the art. Our analytical tools, allow us to simulate multiple solutions and test variable, e.g. run-offs and profiles. Although prototyping would be the ideal, the scale of most projects means testing these sequences is financially prohibitive.

That’s where the in-house high-tech simulators give Dromo the edge. They use these to allow the design team and named drivers /riders to test the circuit and make comment prior to the design being finalised.

The application of these softwares allows creation of various circuit layouts in very little time, and calculations indicative of speeds based on the more advanced 3 dimensional environment.