Home Blog Page 5307

Updated Again: Fabrizio Fastest, Spies Crashes Out Of Second Day Of World Superbike Testing At Kyalami

0

KYALAMI DEVELOPMENT TEAMS TYRE TEST 1O/11/12 DECEMBER SECOND DAY Kyalami, Thursday 11th December 2008 Fabrizio still leads the way in Kyalami testing Michel Fabrizio once again set the pace for Ducati Xerox on the second day of Pirelli tyre development tests at the Kyalami circuit in South Africa. The young Italian clocked a time of 1 minute 40.256 seconds, one second beneath his day 1 time and some way quicker than the circuit’s previous Superbike lap records which date back to 2002. “I’m not entirely satisfied today either because I made a small mistake on my good lap, otherwise I’m convinced I could have got below the 1’40″ mark” declared the 24 year-old from Rome. The battle for second place behind Fabrizio was fast and furious, and it eventually went to German Max Neukirchner on the 2009-spec Suzuki GSX-R1000K9. Ducati’s new signing Noriyuki Haga finally dialled into the leaders’ pace after three crashes yesterday to end up with third quickest time. On a day in which temperatures soared to a torrid 31°C and 47°C on track, fourth place went to the talented 23 year-old from Northern Ireland, Jonathan Rea (Hannspree Ten Kate Honda), this year’s Supersport championship runner-up. After a stunning performance yesterday, the second day proved to be less fortunate for Ben Spies, Yamaha’s American rookie signing, who crashed out harmlessly at Turn 6: his R1 machine was severely damaged and the Texan finished the day early. Carlos Checa and Rea were two other riders who crashed out today. With the top nine riders in the space of eight-tenths of a second, Superbike is shaping up to be ultra-competitive. Aprilia are already in the leading group with their RSV4, Nakano currently lying sixth and Biaggi ninth, while development work is continuing on the BMW S1000RR machines of Troy Corser and Ruben Xaus on their first major testing appearance. Day 2 times: 1. Fabrizio (Ita-Ducati) 1’40″256 (44 laps); 2. Neukirchner (Ger-Suzuki) 1’40″688 (50); 3. Haga (Jpn-Ducati) 1’40″709 (53); 4. Rea (GB-Honda) 1’40″842 (40); 5. Kagayama (Jpn-Suzuki) 1’40″959 (52); 6. Nakano (Jpn-Aprilia) 1’40″968 (42); 7. Checa (Spa-Honda) 1’40″995 (31); 8. Spies (Usa-Yamaha) 1’41″049 (38); 9. Biaggi (Ita-Aprilia) 1’41″077 (56); 10. Kiyonari (Jpn-Honda) 1’41″412 (84); 11. Corser (Aus-Bmw) 1’41″986 (34); 12. Xaus (Spa-Bmw) 1’42″438 (40); 13. Sykes (GB-Yamaha) 1’42″933 (18). More, from a press release issued by Ducati Xerox: Thursday Dec 11 2008 Kyalami – Test THE DUCATI XEROX TEAM CONTINUES WITH WINTER TESTING AT KYALAMI, FABRIZIO STILL FASTEST Kyalami (South Africa): Thursday 11th December 2008: The Ducati Xerox Team has concluded day two of the three-day Pirelli tyre tests taking place at the Kyalami Grand Prix Circuit in South Africa, a track the makes a return to the World Superbike calendar in May 2009 after an absence of six years. Michel Fabrizio, at the end of his first season with the Ducati Xerox squad and already looking forward to the beginning of the 2009 season, was the fastest rider on track yesterday, registering a best lap time of 1m41.2s, and has today improved on that time by a whole second while clocking up 70 laps. Experiencing no real problems with his Ducati F09, Michel’s best time of today, 1m40.2s, is the fastest lap registered yet by any rider at this track. New recruit Noriyuki Haga was on board the Ducati 1098 F09 for the first time yesterday and so far he and the team are very satisfied with the positive results achieved. The 33-year old Japanese rider has spent time working with the team to set the bike up according to his riding position and style. After the first day during which Nori fell three times, without causing injury to himself, Nori and his squad have today made good progress, the team working mainly on the front of the bike and Nori able to test a few different tyres. Fourth fastest yesterday, Nori’s improved on his time with a fastest lap today of 1m40.7s. All of the factory teams are present at the test, with the exception of Kawasaki Paul Bird Motorsport. Conditions are hot and dry, with air temperatures of around 32°C and track temperatures of over 50°C. Michel Fabrizio “I have enjoyed being back on the bike after some weeks off and the test has gone really well so far, I’m very happy. I hadn’t seen this track before of course and I really like it, it’s fun to ride. We haven’t yet tried any qualifiers and I think I may be able to go a touch faster with those tyres but we’ll see tomorrow, with this heat it’s hard to go extremely fast. I’d like to improve even further tomorrow, I’ll see what I can do.” Davide Tardozzi Ducati Xerox Team Manager “We are satisfied with the progress Nori is making, after a difficult day like yesterday. I have been very impressed with Nori’s attitude and results so far this week. Today we tried many different settings and in the last hour we found a route that we will follow tomorrow and in the next tests. Third place today is a valuable result, changing manufacturer and being immediately competitive makes things easier, his winning mentality works well with our mental attitude.” Day 1: Fabrizio (Ducati Xerox) 1m41.2s; Spies (Yamaha) 1m41.5s; Neukirchner (Suzuki) 1m41.7s; Haga (Ducati Xerox) 1m41.7s; Kagayama (Suzuki) 1m41.7s; Nakano (Aprilia) 1m41.8s; Biaggi (Aprilia) 1m42.4s; Kiyonari (Honda) 1m42.7s; Corser (BMW) 1m42.9s; Xaus (BMW) 1m43.2s Day 2: Fabrizio (Ducati Xerox) 1m40.2s; Neukirchner (Suzuki) 1m40.6s; Haga (Ducati Xerox) 1m40.7s; Checa (Honda) 1m40.6s; Rea (Honda) 1m40.8s; Kagayama (Suzuki) 1m40.9s; Nakano (Aprilia) 1m40.9s; Biaggi (Aprilia) 1m41.0s; Kiyonari (Honda) 1m41.4s; Corser (BMW) 1m41.9s; Xaus (BMW) 1m42.4s; Spies (Yamaha) 1m42.9s More, from a press release issued by Team Suzuki News Service: Team Suzuki Alstare riders Max Neukirchner and Yukio Kagayama finished the second day of the Pirelli Development tyres test in Kyalami, South Africa, with the second and fifth-quickest times respectively. The final day was even hotter than the first and by early afternoon the track temperature had risen to over 50 C which caused grip problems. Most of today’s fastest times were done either early in the day or right at the end of the session, when the track cooled off. Italian Michel Fabrizio set the day’s quickest lap with a time of 1:40.256 ahead of Neukirchner and Noriyuki Haga (Yamaha). Max Neukirchner: “Today was good because we’ve done a lot of good work and made good progress. This track is quite bumpy so we spent a lot of time making the bike ride as smoothly as possible. We started with the set-up from the last test in Phillip Island and just carried on from there. We tried quite a few different tyres and worked a lot on the chassis and, if I had not made a couple of small mistakes when I was using soft tyres, maybe I could’ve ended the quickest today.” Yukio Kagayama: “We began with our Phillip Island set-up and then tried to improve the bike to work better on this bumpy track. I had a good feeling with the bike on race tyres, but when I tried a qualifier the feeling was not so good. The high altitude really affects the performance of the bike and it feels slow compared to Phillip Island and difficult to do a wheelie. It wasn’t hard getting down to the 1:41s today, but it was hard getting into the 1:40s. We shall have to see what tomorrow brings, but if everything goes well, maybe we could get into the 1:39s.” Day 2 lap times (from FG Sport): 1. Fabrizio (Ita-Ducati) 1’40″256 (44 laps); 2. Neukirchner (Ger-Suzuki) 1’40″688 (50); 3. Haga (Jpn-Ducati) 1’40″709 (53); 4. Rea (GB-Honda) 1’40″842 (40); 5. Kagayama (Jpn-Suzuki) 1’40″959 (52); 6. Nakano (Jpn-Aprilia) 1’40″968 (42); 7. Checa (Spa-Honda) 1’40″995 (31); 8. Spies (USA-Yamaha) 1’41″049 (38); 9. Biaggi (Ita-Aprilia) 1’41″077 (56); 10. Kiyonari (Jpn-Honda) 1’41″412 (84); 11. Corser (Aus-BMW) 1’41″986 (34); 12. Xaus (Spa-BMW) 1’42″438 (40); 13. Sykes (GB-Yamaha) 1’42″933 (18).

Canadian Track Day Company Launches New Website

0

Mississauga, ON – Hot Lap Events today announced the launch of their new site www.HotLapEvents.com, dedicated to helping North American Riders choose “The Ultimate Track Day Experience” conveniently and reserve their track time online. “We are thrilled about our 2009 schedule as we have included some of North America’s best two wheeled venues to quench the thirst of riders,” says Team Captain Rahul Dua. “Our goal has always been to bring more and more value to our supporters. Tire Service provided by Pirelli Tires, suspension tuning provided by Accelerated Technologies’ own John Sharrard and the highly talented GoLo RACING team providing on and off track coaching are just some of the standard features that our participants can expect at ALL our Track Day Events. With a winning team like that, we all win!,” adds partner and second Team Captain, A.J. Tibayan. A Track day is the only outlet for riders to hone their skills and ride their beautiful two wheeled beauties to their maximum potential in a safe and controlled environment. We take a lot of pride in hosting Track Day Events catering to riders of all levels. Whether you are a street rider who commutes to and from work every day on a “Moto” or a Professional Racer, we feel we have exactly what you’re looking for and would value the opportunity introducing you to “The Ultimate Track Day Experience”. The site contains information about a large variety of common track day questions, our latest news, multimedia photos and video, all the way through to our very own online store! We are inspired to make www.HotLapEvents.com your one stop track day website today and in the future as we continue to develop it to cover your every need. The site will also provide info on special packages that will be launched at the Toronto Motorcycle Show taking place at Metro Toronto Convention Center this December 12-14, 2008 weekend. Please visit our booth in front of the Full Throttle Lounge stage to take advantage of show specials and discounted packages that are guaranteed to satisfy recreational and hardcore enthusiasts alike. Our helpful customer service team will ensure you get your spot(s) reserved for 2009 before they sell out like our 9 events in 2008. About Hot Lap Events: Hot Lap Events offers Track days, trackside riding tips and guidance to riders about the best ways to maximize the track day experience and make it “The Ultimate Track Day Experience” Visit us at www.HotLapEvents.com

FIM Grand Prix Commission Announces Technical Regulations For 250cc Replacement Class, ‘Moto2’

FIM Road Racing World Championship Grand Prix Replacement Regulations for 250cc Class as from 2011 (Moto2) The Grand Prix Commission, composed of Messrs. Carmelo Ezpeleta (Dorna, Chairman), Claude Danis (FIM), Hervé Poncharal (IRTA) and Takanao Tsubouchi (MSMA), in the presence of M. Paul Butler (Secretary of the meeting), in a meeting held yesterday in Barcelona, unanimously decided to introduce the following amendments (see attached pdf file) to the Road Racing World Championship Grand Prix Regulations — application as from 2011. Replacement Regulation for 250cc Class from 2011 (Moto2) Technical Regulations: 1. Engine 1.1 4-stroke engines only. 1.2 Engine capacity: maximum 600cc. 1.3 4 cylinders maximum. 1.4 No oval pistons. 1.5 Engines must be normally aspirated. No turbo-charging, no super-charging. 1.6 Engine speed limited to maximum: 16,000 rpm. 4-cylinder engines 15,500 rpm. 3-cylinder engines 15,000 rpm. 2-cylinder engines An electronic system supplied by the Organisers will be permanently attached to monitor and control engine speed. 1.7 Pneumatic valve operation is not permitted. 1.8 Inlet and Exhaust valves must be of conventional type (reciprocating poppet valves). 1.9 Variable valve timing or variable valve lift systems are not permitted. 1.10 Only wet-sump type engine lubrication systems are permitted. 1.11 Minimum weight of complete engine with throttle body, dry: 53 kg 4-cylinder 50 kg 3-cylinder 47 kg 2 cylinder 2. Inlet & Fuel System 2.1 Variable-length inlet tract systems are not permitted. 2.2 Only one throttle control valve per cylinder is permitted. No other moving devices are permitted in the inlet tract before the engine intake valve. 2.3 Throttle bodies will have a maximum internal diameter (must be perfectly circle except for the area of dent or groove to allow the injector to come out) at engine side out-let of: 42 mm for 4-cylinder 48 mm for 3-cylinder 59 mm for 2-cylinder 2.4 Fuel injectors will be restricted to a defined type (tba, based on cost). 2.5 Fuel pressure must not exceed 5.0 bar. 2.6 No artificial cooling of intake air or fuel. 2.7 Only air or air/fuel mixture is permitted in the induction tract and combustion chamber. 2.8 No direct fuel injection into the cylinder/head/combustion chamber. 2.9 Fuel specification will be for standard unleaded fuel (commercially available EU-compliant “pump fuel”). 3. Exhaust system 3.1 Variable length exhaust systems are not permitted. 3.2 Noise limit will be a maximum of 120 dB/A, measured in a static test. 4. Transmission 4.1 A maximum of 6 gearbox speeds is permitted. 4.2 A maximum of 3 alternate gear ratios for each gearbox speed, and 2 alternate ratios for the primary drive gear is permitted. Teams will be required to declare the gearbox ratios for each gear used at the beginning of the season. 4.3 Electro-mechanical or electro-hydraulic clutch actuating systems are not permitted. 5. Ignition, Electronics & Data-Logging 5.1 Data logger system will be supplied by the series Organizer. 5.2 Only the ECU/fuel injection control units supplied by the series Organiser are allowed to be fitted to the motorcycle. Electronic control units include the timing transponder, engine RPM control, and datalogger systems. No other electronic control or datalogging systems will be allowed on the motorcycle. The price of ECU unit made by each engine manufacturer must be equal to or less than JPY75,000 (about Euro650). 6. Chassis 6.1 Chassis will be a prototype, the design and construction of which is free within the constraints of the FIM Grand Prix Technical Regulations. The frame, swing-arm, fuel tank, seat and cowling are forbidden to use from a non-prototype as series production road-going motorcycle. 6.2 Minimum Total Weight: 135kg for 4-cylinder 130kg for 3-cylinder 125kg for 2-cylinder 6.3 No carbon brake discs. 7. Wheels & Tyres 7.1 No carbon composite wheels. 7.2 The maximum permitted wheel rim width is: Front 4.00″ Rear 6.00″ or 6.25″ 7.3 The only permitted wheel rim diameter is: Front 17″ Rear 17″ 7.4 The number of slick tyres allocated to each rider per event will be controlled. 8. Materials & Construction 8.1 Construction materials will be limited to exclude expensive “non-conventional” materials and manufacturing methods (a list will be issued). 8.2 The following components must be made from iron-based alloys: Valve springs, camshafts, crankshafts, connecting rods, piston pins, brake discs. 8.3 Engine crankcases and cylinder heads must be made from cast aluminium alloys. 8.4 Pistons must be made from an aluminium alloy. 9. General 9.1 Number of machines: the team can scrutineer only one motorcycle per rider. 9.2 Number of engines: a maximum of 2 complete engines per rider is permitted at any event. Teams will be required to register engine serial numbers at Technical Control on the day before the first practice. 9.3 Apart from the above regulations, all other construction criteria, dimensions and specifications are as per the FIM Grand Prix Regulations. 9.4 The engine (excluding exhaust, throttle bodies and ECU) used in a race is available to be purchased by another competitor in the same race for a fixed price of €20,000 (Euro). Such purchase request must be made in writing to Race Direction within the protest period, that is within 60 minutes after the official end of the race. The transaction and delivery will be completed immediately at the end of the 60 minute protest period and will be underwritten by IRTA. Teams refusing to sell when presented with a valid request will be disqualified.

Suzuki Motor Corp. President/COO Hiroshi Tsuda Steps Down, Chairman/CEO Osamu Suzuki Assumes President’s Responsibilities

Japan’s Suzuki Motor Corporation has announced that President and Chief Operating Officer (COO) Hiroshi Tsuda has asked to step down from his position due to illness and that Chairman and Chief Executive Officer (CEO) Osamu Suzuki would take on Tsuda’s responsibilities, according to Reuters. Read the article here: ~http://www.reuters.com/article/GCA-autos/idUSTRE4B91HR20081210~

Ducati North America Holding Custom Monster 1100 S Contest For Dealers

As the national premiere approaches, Ducati dealers get to work customizing. Cupertino, CA (10 December 2008) Ducati North America is pleased to announce a customization contest as part of the forthcoming Ducati Monster 1100 S showroom premiere. In order to launch the Monster 1100 S to the public in real monster style, Ducati has launched a dealer contest to see who can build the best custom Monster. As the original custom-ready naked bike, the new Monster 1100 S is ready for modifications, and the gloves are coming off in a contest to build the best. Fifty-eight dealers in the US and Canada have taken delivery of a body panel set in order to begin paintwork on the dealership’s dream Monster; and all have accessories in house waiting to be fitted on the dealership’s first bike. The results promise to be nothing less than spectacular and will launch the Monster with a bang. The Ducati dealers will have two weeks over the holidays to build their custom; and their bikes will be unveiled to customers over the National Premiere weekend, January 9-10th. The weekend will celebrate the individuality and personal expression inspired by Ducati’s original naked bike and highlight the vast potential of the Monster 1100 S. For a list of participating dealers, and to vote for the coolest custom Monster, please visit www.ducatiusa.com; where the contest will run January 1st through January 13th.

More On The United States’ Proposed 100% Tariffs On European Motorcycles And Scooters

PICKERINGTON, Ohio — The American Motorcyclist Association (AMA) today strongly criticized the Bush Administration’s consideration of a possible 100 percent tariff on a broad range of popular European motorcycles and scooters in retaliation for European Union (EU) restrictions on imported American beef. “In this tough recessionary climate, it’s ludicrous for the U.S. Trade Representative to even consider imposing a 100 percent motorcycle and scooter tariff, because the move will cost countless Americans their jobs,” said Ed Moreland, AMA vice present for government relations. “This very day, the Administration and the U.S. Congress are planning to bail out troubled U.S. automakers to the tune of billions of dollars to save American jobs,” Moreland said. “How, in good conscience, can the U.S. Trade Representative turn around and propose a measure that will spell the end of many motorcycle and scooter dealerships, and put their employees out in the street?” U.S. trade officials are looking at a list of more than 100 European goods for the possible imposition of 100 percent import duties in response to the EU’s ongoing import ban on American beef treated with growth hormones. EU officials haven’t lifted the 20-year-old ban despite a World Trade organization order to end it. Now the U.S. wants to impose $116.8 million in import duties to equal the amount of money it claims the U.S beef industry loses each year because of the ban. Included on the hit list are motorcycles and scooters with engines displacing 51cc to 500cc, representing popular on- and off-highway machines from brands such as Aprilia, Beta, BMW, Fantic, Gas Gas, Husaberg, Husqvarna, KTM, Montesa, Piaggio, Scorpa, Sherco, TM and Vespa. “In America, the majority of motorcycles and scooters under 500cc are sold through local dealerships,” Moreland said. “Collectively, these dealerships contribute to the employment of a substantial number of Americans working in sales, service, parts and general operations. Unjustified trade sanctions on European-produced motorcycles and scooters will choke off this vital business, dealerships will close at an alarming rate, and the negative effects will spread downstream through the aftermarket and recreational-equipment sectors, and even the motorsports entertainment industry. Countless Americans will find themselves without jobs.” The AMA sent comments to the Office of the U.S. Trade Representative by a Dec. 8 deadline to express the opinions of the Association’s 300,000 members on the possible tariffs. “It is simply unconscionable that motorcycles and scooters are on the list in the first place. They have no place in a trade war over beef,” Moreland said. “Furthermore, we find it tragically ironic that, as part of the auto bailout plan, federal lawmakers are considering requirements for American car makers to produce more fuel-efficient vehicles, and yet the motorcycles and scooters that the U.S. trade representative is considering for the 100 percent tariff get three to five times better fuel economy than many cars.” It is unknown when U.S. officials will decide on which European goods will be hit with the stiff tariffs. More, from a press release issued by Brandware PR, on behalf of Piaggio USA: Piaggio Group Americas, Inc. strongly opposes the recently proposed retaliatory action in conjunction with the EU-Beef Hormone trade dispute. According to a notice issued by the office of the U.S. Trade Representative (USTR), revisions are being considered to the list of meat and food products that currently have a retaliatory tariff imposed on them. Inexplicably, USTR is considering extending retaliatory tariffs to European motorcycles between 51cc and 500cc displacement. The recommendation is to add a 100% ad valorem tax to European-manufactured motorcycles and scooters that meet this displacement category an action whose chief victims would be Piaggio Group Americas, the New York, NY headquartered firm that is responsible for the Vespa, Piaggio, Aprilia and Moto Guzzi brands in the U.S. market, as well as its network of dealers and customers. Piaggio Group Americas, Inc. President and CEO Paolo Timoni has the following statement to make about these proposed changes to the EU-Beef Hormone dispute sanctions: “We urge USTR not to punish the U.S. employees of a healthy and growing personal transportation company, along with the 400+ U.S. dealers and employees that retail our scooters and small displacement motorcycles, when the only focus of this trade dispute is an agricultural product. We also urge USTR not to punish the American consumer who in rapidly increasing numbers is choosing to add these clean-running, fuel-efficient machines to their transportation fleets in order to reduce U.S. fuel consumption, foreign oil dependence and today’s massive congestion and environmental issues. Finally, we urge USTR not to impose measures that would quickly force Piaggio Group Americas and a significant number of its dealers out of business. “The intricacies of retaliatory tariff measures are not our bailiwick but serving the thousands of American consumers who have a passion for our products and the dedicated U.S. dealers and partners who retail and service them most certainly is. We encourage USTR to find more appropriate and relevant measures to settle its beef with the European Union.”

Parts Canada Superbike Championship Adds New Venue For 2009

TORONTO, Ont. (December 10) The Parts Canada Superbike Championship brings a new venue onto its 2009 schedule as the national road racing series makes a return to Quebec soil following a one-year absence. The event at Montreal’s ICAR Mirabel facility on June 11-14 will be the second round of the seven-race championship tour. Last August a number of the top Parts Canada Superbike Championship racers enjoyed a successful test at the venue, which has hosted regional car and kart racing events since opening in the fall of 2007. “Returning to Quebec was always the focus of our efforts for the 2009 season,” said Colin Fraser of Professional Motorsports Productions (PMP), which organizes the Parts Canada Superbike Championship. “We have had an ongoing dialogue with the ICAR Mirabel people for over a year and we were pleased with our test last August, where our riders were able to sample the tarmac in both wet and dry conditions.” The 2009 Parts Canada Superbike Championship once again opens at Calabogie Motorsports Park in Calabogie, ON, near Ottawa, and concludes at Shannonville Motorsport Park in Shannonville, ON over the Sept. 3-6 Labour Day Weekend. The Calabogie race, which debuted last season, will be run on the 5.05km (3.05-mile) Long Track rather than the 2.81km (1.38-mile) ‘Stadium Track’ that was used last year. The Shannonville event will once again be staged on the 2.45km (1.53-mile) ‘Pro Track.’ Following the debut event at ICAR Mirabel, the Parts Canada Superbike Championship will move west for a round at Calgary’s 3.2km (2.0-mile) Race City Motorsports Park on June 25-28. Mosport International Raceway, near Bowmanville, ON, will stage its traditional doubleheader July 16-19 on its world famous 3.9km (2.459-mile) circuit. The series then heads to the Maritimes for its penultimate round on Aug. 6-9 at the 2.56km (1.6-mile) Atlantic Motorsport Park in Shubenacadie, NS before concluding at Shannonville. AMP will be hosting its 25th Canadian Superbike national. “Once again our season will feature four classic Canadian road racing venues, each of which offers a different type of challenge to our racers and our teams,” said Parts Canada Superbike Championship race director Craig Johnson. “Calabogie was a popular addition to the schedule last year and we look forward to going back there. The layout we will be using will be the longest on the Canadian tour and it will add an exciting new dimension to the series. “Everyone involved in the championship thinks both Calabogie and ICAR Mirabel have the potential to become traditional stops on the Canadian tour for a long time, just like Race City, Mosport, AMP and Shannonville.” In addition to playing host to the Parts Canada Superbike feature class, each national round will stage races for the Yoshimura Pro 600 Sport Bike, Armour Bodies Amateur 600 Sport Bike, Canadian Thunder, Canadian Sport Twins, Suzuki SV650 National Cup and Honda CBR125R Challenge national support divisions. The series will also make its traditional visit to the Jennings GP circuit in Florida for the Official Pirelli Tire Test April 28-29. For the first time this test will be open to competitors in all classes of the Parts Canada Superbike Championship, after previously being restricted to factory Pro teams. The 2009 season will mark the 30th year of professional Superbike racing in Canada, and represents the start of a new three-year title sponsorship arrangement with Parts Canada, a relationship that dates back to 1997. “The Parts Canada name, along with Parts Unlimited and the new Parts Europe division, has become synonymous with racing worldwide,” Fraser said. “Our long association with Parts Canada has given our series a stability and security that is rare in motorsport. In these challenging economic times it is hard to overstate the significance of their contribution.” Additionally, earlier this year Pirelli renewed its deal to be spec tire supplier to the Parts Canada Superbike Championship for another three years. The 2008 season marked the successful debut of SuperPole qualifying, backed by Pirelli and Inside Motorcycles magazine. “Pirelli has made a tremendous impact since becoming our spec tire supplier in 2006,” said Peter Hooegeveen, technical director for the series. “They have consistently improved the quality of their product each season while providing a level playing field for our racers. Their on-site tech support, provided by staff directly from Italy, shows Pirelli’s commitment to the Parts Canada Superbike Championship.” Canadian Kawasaki Motors factory rider Jordan Szoke of Brantford, ON will head into the 2009 Parts Canada Superbike Championship season trying to become the first racer to win four consecutive national Superbike titles, and aiming to equal Steve Crevier’s all-time leading total of six Canadian number one plates. 2009 Parts Canada Superbike Championship Schedule April 28-29, Test Jennings GP Jennings, FL May 2124, Round 1 Calabogie Motorsport Park Calabogie, ON June 1114, Round 2 ICAR Mirabel Montreal, QC June 2528, Round 3 Race City Motorsports Park Calgary, AB July 1619, Rounds 4-5 Mosport International Raceway Mosport, ON Aug. 69, Round 6 Atlantic Motorsport Park Shubenacadie, NS Sept. 36, Round 7 Shannonville Motorsport Park (Pro) Shannonville, ON

Spies Second-fastest In World Superbike Test At Kyalami

0

HANNSPREE FIM SUPERBIKE WORLD CHAMPIONSHIP® KYALAMI DEVELOPMENT TEAMS TYRE TEST 1O/11/12 DECEMBER FIRST DAY Kyalami, Wednesday 10th December 2008 Fabrizio goes quickest on opening day of Superbike testing at Kyalami Michel Fabrizio notched up the quickest time with his factory Ducati 1098F09 on the opening day of Pirelli tyre development testing at Kyalami (South Africa). The winter tests are being used by almost all the top manufacturer teams in preparation for the 2009 FIM Superbike World Championship, which gets underway in Australia at the start of March. The Italian powered to a superb time of 1 minute 41.204 seconds, a tenth of a second under the unofficial circuit record set by Colin Edwards (Castrol Honda) in 2002 during the last edition of the South African round, which returns to the calendar next year on May 17th. “I’m really pleased because it’s the first time I’ve lapped on this track”, declared 23 year-old Fabrizio, who is about to embark on his second season with the Italian factory team. “I feel sure can go even quicker, I’ll try and do so in the remaining two days.” Another major surprise was second place for Yamaha Motor Italia’s American rookie signing Ben Spies, who ended up just a fraction behind. “I like this track; it’s almost like some AMA tracks and it’s not too technical, not that difficult to learn, but I was having a lot of fun riding on it. We were most interested in trying out the bike in hotter track conditions than in Portimao. The handling is good; the engine comes in really smooth exiting corners and it lays the power down well. Top end makes no difference in that situation and the engine really drives well from low down,” commented the 24 year-old Texan, a new face on the Superbike scene in 2009. It wasn’t a particularly good start on the factory Ducati for Noriyuki Haga, ex-Yamaha, who crashed three times on his debut with the 2009-spec Italian machine: the first after colliding with Jonathan Rea, the others due to a couple of mistakes, but the Japanese rider did manage to set fourth quickest time. Max Biaggi arrived in the circuit late at lunchtime, after the other riders had already had four hours of track time, due to a series of never-ending problems with his flight, which began on Monday evening and which lasted 36 hours instead of the scheduled 12. Despite this Aprilia’s new signing however did manage to get up to seventh place, 1.2 seconds off the pace, and just behind his equally impressive team-mate Shinya Nakano. “I really like the RSV4, today we just got warmed up, we’ll see where we can arrive in the remaining sessions”, declared Biaggi. Both Troy Corser and Ruben Xaus were not far off the pace either on their first day of testing with the new BMW S1000RR machines, the Australian in a respectable ninth place and the Spaniard in tenth. Day 1 times: 1. Fabrizio (Ita-Ducati) 1’41″204 (66 laps); 2. Spies (Usa-Yamaha) 1’41″599 (46); 3. Neukirchner (Ger-Suzuki) 1’41″713 (69); 4. Haga (Jpn-Ducati) 1’41″730 (31); 5. Kagayama (Jpn-Suzuki) 1’41″755 (39); 6. Nakano (Jpn-Aprilia) 1’41″846 (51); 7. Biaggi (Ita-Aprilia) 1’42″446 (29); 8. Kiyonari (Jpn-Honda) 1’42″744 (62); 9. Corser (Aus-Bmw) 1’42″975 (33); 10. Xaus (Spa-Bmw) 1’43″274 (41); 11. Checa (Spa-Honda) 1’43″418 (10); 12. Rea (GB-Honda) 1’44″496 (16); 13. Sykes (GB-Yamaha) 1’46″780 (16).

Alex Gobert’s Road Race Performance Academy Announces 2009 Calendar

0

Alex Gobert’s Road Race Performance Academy will travel nationwide in 2009, today releasing a packed calendar that will see Australia’s new era in rider training visit each and every state around the country. Following a successful introduction to coaching in the second half of this year, RRPA has been going from strength to strength, building on experience and attracting growing numbers of participants at each event. The circuit-based program will visit many tracks around the country, including circuits in New South Wales, Victoria, Tasmania, South Australia, Western Australia and the Northern Territory. Dates in Queensland are currently being finalised and will be announced as soon as they are 100% confirmed. Gobert’s Academy will introduce a recently announced all-new structure in the new year, with the full program consisting of Level 1 and Level 2 groups, while a cost effective Development Group will invite racers and returning riders to brush up on certain skills without undergoing the entire curriculum. RRPA’s revised structure is a result of feedback from this year’s courses, with the program now set to adopt one of the most innovative structures ever in rider training “” all designed to suit each individual’s skill level. ROAD RACE PERFORMANCE ACADEMY 2009 NATIONAL CALENDAR MONTH DATE DAY LOCATION January – February 2 Monday Oran Park GP, NSW March 21 Saturday Symmons Plains, TAS 27 Friday Mallala, SA April – May 15 Friday Broadford, VIC June 20 Saturday Oran Park South, NSW July 6 Monday Barbagallo, WA August 29 Saturday Hidden Valley, NT September TBC October TBC November 27 Friday Broadford, VIC December 21 Monday Oran Park South, NSW ALEX GOBERT: “To be able to offer our services all around Australia is a dream come true for me, and I’m sure that the states which don’t usually get the professional rider training programs visiting them will really appreciate it and jump at the opportunity to take part. We’ll also build on establishing RRPA further in our local states and continue to prove that we are a new era in rider training in this country.” Dates and entry forms are now up on RRPA’s website at www.rrpa.com.au. Stay tuned for other selected dates to be confirmed in the coming weeks.

DEWALT Power Tools Does Two-Year Deal With MotoGP

The world’s leading manufacturer of professional power tools and accessories, DEWALT, has joined the MotoGP World Championship as the MotoGP Power Tool Supplier for the 2009 and 2010 seasons, thanks to a new agreement with Dorna Sports. DEWALT power tools are to be used in the MotoGP paddock by Dorna’s operational staff working at the circuits. Established over 80 years ago, DEWALT’S reputation of designing, engineering and building tough industrial power tools and accessories, and delivering high performance to the professional tradesman, has earned the company market leadership in its native North America. With their commitment to providing jobsite solutions that continue to revolutionise the working methods employed by the construction industry, DEWALT is now the fastest growing supplier of professional power tools in the world and has remained so over the past five years. The new partnership with Dorna Sports will allow DEWALT to exploit the global marketing opportunities afforded by MotoGP and further enhance their brand position across Europe, the Middle East and Africa. DEWALT will also be present in the public area at most European Grands Prix to allow end users the opportunity to try products and truly understand their outstanding performance and productivity benefits. DEWALT’s Pete Morris, Vice President – Professional, Europe, Middle East & Africa, commented, ‘We are excited to announce our new partnership with Dorna and MotoGP. It is important for our brand to be associated with a high energy growth sport, with strong access to our target demographic and end users. This strategy is key to our DEWALT formula, as it promotes close end user engagement at the track and beyond.’ Dorna Sports’ Managing Director Pau Serracanta stated, ‘We are delighted to welcome DEWALT into the MotoGP World Championship paddock as our Power Tool Supplier. The company have strong links to motorsports and the quality of their products will be recognised by MotoGP’s ever increasing fanbase.’

Updated Again: Fabrizio Fastest, Spies Crashes Out Of Second Day Of World Superbike Testing At Kyalami

KYALAMI DEVELOPMENT TEAMS TYRE TEST 1O/11/12 DECEMBER SECOND DAY Kyalami, Thursday 11th December 2008 Fabrizio still leads the way in Kyalami testing Michel Fabrizio once again set the pace for Ducati Xerox on the second day of Pirelli tyre development tests at the Kyalami circuit in South Africa. The young Italian clocked a time of 1 minute 40.256 seconds, one second beneath his day 1 time and some way quicker than the circuit’s previous Superbike lap records which date back to 2002. “I’m not entirely satisfied today either because I made a small mistake on my good lap, otherwise I’m convinced I could have got below the 1’40″ mark” declared the 24 year-old from Rome. The battle for second place behind Fabrizio was fast and furious, and it eventually went to German Max Neukirchner on the 2009-spec Suzuki GSX-R1000K9. Ducati’s new signing Noriyuki Haga finally dialled into the leaders’ pace after three crashes yesterday to end up with third quickest time. On a day in which temperatures soared to a torrid 31°C and 47°C on track, fourth place went to the talented 23 year-old from Northern Ireland, Jonathan Rea (Hannspree Ten Kate Honda), this year’s Supersport championship runner-up. After a stunning performance yesterday, the second day proved to be less fortunate for Ben Spies, Yamaha’s American rookie signing, who crashed out harmlessly at Turn 6: his R1 machine was severely damaged and the Texan finished the day early. Carlos Checa and Rea were two other riders who crashed out today. With the top nine riders in the space of eight-tenths of a second, Superbike is shaping up to be ultra-competitive. Aprilia are already in the leading group with their RSV4, Nakano currently lying sixth and Biaggi ninth, while development work is continuing on the BMW S1000RR machines of Troy Corser and Ruben Xaus on their first major testing appearance. Day 2 times: 1. Fabrizio (Ita-Ducati) 1’40″256 (44 laps); 2. Neukirchner (Ger-Suzuki) 1’40″688 (50); 3. Haga (Jpn-Ducati) 1’40″709 (53); 4. Rea (GB-Honda) 1’40″842 (40); 5. Kagayama (Jpn-Suzuki) 1’40″959 (52); 6. Nakano (Jpn-Aprilia) 1’40″968 (42); 7. Checa (Spa-Honda) 1’40″995 (31); 8. Spies (Usa-Yamaha) 1’41″049 (38); 9. Biaggi (Ita-Aprilia) 1’41″077 (56); 10. Kiyonari (Jpn-Honda) 1’41″412 (84); 11. Corser (Aus-Bmw) 1’41″986 (34); 12. Xaus (Spa-Bmw) 1’42″438 (40); 13. Sykes (GB-Yamaha) 1’42″933 (18). More, from a press release issued by Ducati Xerox: Thursday Dec 11 2008 Kyalami – Test THE DUCATI XEROX TEAM CONTINUES WITH WINTER TESTING AT KYALAMI, FABRIZIO STILL FASTEST Kyalami (South Africa): Thursday 11th December 2008: The Ducati Xerox Team has concluded day two of the three-day Pirelli tyre tests taking place at the Kyalami Grand Prix Circuit in South Africa, a track the makes a return to the World Superbike calendar in May 2009 after an absence of six years. Michel Fabrizio, at the end of his first season with the Ducati Xerox squad and already looking forward to the beginning of the 2009 season, was the fastest rider on track yesterday, registering a best lap time of 1m41.2s, and has today improved on that time by a whole second while clocking up 70 laps. Experiencing no real problems with his Ducati F09, Michel’s best time of today, 1m40.2s, is the fastest lap registered yet by any rider at this track. New recruit Noriyuki Haga was on board the Ducati 1098 F09 for the first time yesterday and so far he and the team are very satisfied with the positive results achieved. The 33-year old Japanese rider has spent time working with the team to set the bike up according to his riding position and style. After the first day during which Nori fell three times, without causing injury to himself, Nori and his squad have today made good progress, the team working mainly on the front of the bike and Nori able to test a few different tyres. Fourth fastest yesterday, Nori’s improved on his time with a fastest lap today of 1m40.7s. All of the factory teams are present at the test, with the exception of Kawasaki Paul Bird Motorsport. Conditions are hot and dry, with air temperatures of around 32°C and track temperatures of over 50°C. Michel Fabrizio “I have enjoyed being back on the bike after some weeks off and the test has gone really well so far, I’m very happy. I hadn’t seen this track before of course and I really like it, it’s fun to ride. We haven’t yet tried any qualifiers and I think I may be able to go a touch faster with those tyres but we’ll see tomorrow, with this heat it’s hard to go extremely fast. I’d like to improve even further tomorrow, I’ll see what I can do.” Davide Tardozzi Ducati Xerox Team Manager “We are satisfied with the progress Nori is making, after a difficult day like yesterday. I have been very impressed with Nori’s attitude and results so far this week. Today we tried many different settings and in the last hour we found a route that we will follow tomorrow and in the next tests. Third place today is a valuable result, changing manufacturer and being immediately competitive makes things easier, his winning mentality works well with our mental attitude.” Day 1: Fabrizio (Ducati Xerox) 1m41.2s; Spies (Yamaha) 1m41.5s; Neukirchner (Suzuki) 1m41.7s; Haga (Ducati Xerox) 1m41.7s; Kagayama (Suzuki) 1m41.7s; Nakano (Aprilia) 1m41.8s; Biaggi (Aprilia) 1m42.4s; Kiyonari (Honda) 1m42.7s; Corser (BMW) 1m42.9s; Xaus (BMW) 1m43.2s Day 2: Fabrizio (Ducati Xerox) 1m40.2s; Neukirchner (Suzuki) 1m40.6s; Haga (Ducati Xerox) 1m40.7s; Checa (Honda) 1m40.6s; Rea (Honda) 1m40.8s; Kagayama (Suzuki) 1m40.9s; Nakano (Aprilia) 1m40.9s; Biaggi (Aprilia) 1m41.0s; Kiyonari (Honda) 1m41.4s; Corser (BMW) 1m41.9s; Xaus (BMW) 1m42.4s; Spies (Yamaha) 1m42.9s More, from a press release issued by Team Suzuki News Service: Team Suzuki Alstare riders Max Neukirchner and Yukio Kagayama finished the second day of the Pirelli Development tyres test in Kyalami, South Africa, with the second and fifth-quickest times respectively. The final day was even hotter than the first and by early afternoon the track temperature had risen to over 50 C which caused grip problems. Most of today’s fastest times were done either early in the day or right at the end of the session, when the track cooled off. Italian Michel Fabrizio set the day’s quickest lap with a time of 1:40.256 ahead of Neukirchner and Noriyuki Haga (Yamaha). Max Neukirchner: “Today was good because we’ve done a lot of good work and made good progress. This track is quite bumpy so we spent a lot of time making the bike ride as smoothly as possible. We started with the set-up from the last test in Phillip Island and just carried on from there. We tried quite a few different tyres and worked a lot on the chassis and, if I had not made a couple of small mistakes when I was using soft tyres, maybe I could’ve ended the quickest today.” Yukio Kagayama: “We began with our Phillip Island set-up and then tried to improve the bike to work better on this bumpy track. I had a good feeling with the bike on race tyres, but when I tried a qualifier the feeling was not so good. The high altitude really affects the performance of the bike and it feels slow compared to Phillip Island and difficult to do a wheelie. It wasn’t hard getting down to the 1:41s today, but it was hard getting into the 1:40s. We shall have to see what tomorrow brings, but if everything goes well, maybe we could get into the 1:39s.” Day 2 lap times (from FG Sport): 1. Fabrizio (Ita-Ducati) 1’40″256 (44 laps); 2. Neukirchner (Ger-Suzuki) 1’40″688 (50); 3. Haga (Jpn-Ducati) 1’40″709 (53); 4. Rea (GB-Honda) 1’40″842 (40); 5. Kagayama (Jpn-Suzuki) 1’40″959 (52); 6. Nakano (Jpn-Aprilia) 1’40″968 (42); 7. Checa (Spa-Honda) 1’40″995 (31); 8. Spies (USA-Yamaha) 1’41″049 (38); 9. Biaggi (Ita-Aprilia) 1’41″077 (56); 10. Kiyonari (Jpn-Honda) 1’41″412 (84); 11. Corser (Aus-BMW) 1’41″986 (34); 12. Xaus (Spa-BMW) 1’42″438 (40); 13. Sykes (GB-Yamaha) 1’42″933 (18).

Canadian Track Day Company Launches New Website

Mississauga, ON – Hot Lap Events today announced the launch of their new site www.HotLapEvents.com, dedicated to helping North American Riders choose “The Ultimate Track Day Experience” conveniently and reserve their track time online. “We are thrilled about our 2009 schedule as we have included some of North America’s best two wheeled venues to quench the thirst of riders,” says Team Captain Rahul Dua. “Our goal has always been to bring more and more value to our supporters. Tire Service provided by Pirelli Tires, suspension tuning provided by Accelerated Technologies’ own John Sharrard and the highly talented GoLo RACING team providing on and off track coaching are just some of the standard features that our participants can expect at ALL our Track Day Events. With a winning team like that, we all win!,” adds partner and second Team Captain, A.J. Tibayan. A Track day is the only outlet for riders to hone their skills and ride their beautiful two wheeled beauties to their maximum potential in a safe and controlled environment. We take a lot of pride in hosting Track Day Events catering to riders of all levels. Whether you are a street rider who commutes to and from work every day on a “Moto” or a Professional Racer, we feel we have exactly what you’re looking for and would value the opportunity introducing you to “The Ultimate Track Day Experience”. The site contains information about a large variety of common track day questions, our latest news, multimedia photos and video, all the way through to our very own online store! We are inspired to make www.HotLapEvents.com your one stop track day website today and in the future as we continue to develop it to cover your every need. The site will also provide info on special packages that will be launched at the Toronto Motorcycle Show taking place at Metro Toronto Convention Center this December 12-14, 2008 weekend. Please visit our booth in front of the Full Throttle Lounge stage to take advantage of show specials and discounted packages that are guaranteed to satisfy recreational and hardcore enthusiasts alike. Our helpful customer service team will ensure you get your spot(s) reserved for 2009 before they sell out like our 9 events in 2008. About Hot Lap Events: Hot Lap Events offers Track days, trackside riding tips and guidance to riders about the best ways to maximize the track day experience and make it “The Ultimate Track Day Experience” Visit us at www.HotLapEvents.com

FIM Grand Prix Commission Announces Technical Regulations For 250cc Replacement Class, ‘Moto2’

FIM Road Racing World Championship Grand Prix Replacement Regulations for 250cc Class as from 2011 (Moto2) The Grand Prix Commission, composed of Messrs. Carmelo Ezpeleta (Dorna, Chairman), Claude Danis (FIM), Hervé Poncharal (IRTA) and Takanao Tsubouchi (MSMA), in the presence of M. Paul Butler (Secretary of the meeting), in a meeting held yesterday in Barcelona, unanimously decided to introduce the following amendments (see attached pdf file) to the Road Racing World Championship Grand Prix Regulations — application as from 2011. Replacement Regulation for 250cc Class from 2011 (Moto2) Technical Regulations: 1. Engine 1.1 4-stroke engines only. 1.2 Engine capacity: maximum 600cc. 1.3 4 cylinders maximum. 1.4 No oval pistons. 1.5 Engines must be normally aspirated. No turbo-charging, no super-charging. 1.6 Engine speed limited to maximum: 16,000 rpm. 4-cylinder engines 15,500 rpm. 3-cylinder engines 15,000 rpm. 2-cylinder engines An electronic system supplied by the Organisers will be permanently attached to monitor and control engine speed. 1.7 Pneumatic valve operation is not permitted. 1.8 Inlet and Exhaust valves must be of conventional type (reciprocating poppet valves). 1.9 Variable valve timing or variable valve lift systems are not permitted. 1.10 Only wet-sump type engine lubrication systems are permitted. 1.11 Minimum weight of complete engine with throttle body, dry: 53 kg 4-cylinder 50 kg 3-cylinder 47 kg 2 cylinder 2. Inlet & Fuel System 2.1 Variable-length inlet tract systems are not permitted. 2.2 Only one throttle control valve per cylinder is permitted. No other moving devices are permitted in the inlet tract before the engine intake valve. 2.3 Throttle bodies will have a maximum internal diameter (must be perfectly circle except for the area of dent or groove to allow the injector to come out) at engine side out-let of: 42 mm for 4-cylinder 48 mm for 3-cylinder 59 mm for 2-cylinder 2.4 Fuel injectors will be restricted to a defined type (tba, based on cost). 2.5 Fuel pressure must not exceed 5.0 bar. 2.6 No artificial cooling of intake air or fuel. 2.7 Only air or air/fuel mixture is permitted in the induction tract and combustion chamber. 2.8 No direct fuel injection into the cylinder/head/combustion chamber. 2.9 Fuel specification will be for standard unleaded fuel (commercially available EU-compliant “pump fuel”). 3. Exhaust system 3.1 Variable length exhaust systems are not permitted. 3.2 Noise limit will be a maximum of 120 dB/A, measured in a static test. 4. Transmission 4.1 A maximum of 6 gearbox speeds is permitted. 4.2 A maximum of 3 alternate gear ratios for each gearbox speed, and 2 alternate ratios for the primary drive gear is permitted. Teams will be required to declare the gearbox ratios for each gear used at the beginning of the season. 4.3 Electro-mechanical or electro-hydraulic clutch actuating systems are not permitted. 5. Ignition, Electronics & Data-Logging 5.1 Data logger system will be supplied by the series Organizer. 5.2 Only the ECU/fuel injection control units supplied by the series Organiser are allowed to be fitted to the motorcycle. Electronic control units include the timing transponder, engine RPM control, and datalogger systems. No other electronic control or datalogging systems will be allowed on the motorcycle. The price of ECU unit made by each engine manufacturer must be equal to or less than JPY75,000 (about Euro650). 6. Chassis 6.1 Chassis will be a prototype, the design and construction of which is free within the constraints of the FIM Grand Prix Technical Regulations. The frame, swing-arm, fuel tank, seat and cowling are forbidden to use from a non-prototype as series production road-going motorcycle. 6.2 Minimum Total Weight: 135kg for 4-cylinder 130kg for 3-cylinder 125kg for 2-cylinder 6.3 No carbon brake discs. 7. Wheels & Tyres 7.1 No carbon composite wheels. 7.2 The maximum permitted wheel rim width is: Front 4.00″ Rear 6.00″ or 6.25″ 7.3 The only permitted wheel rim diameter is: Front 17″ Rear 17″ 7.4 The number of slick tyres allocated to each rider per event will be controlled. 8. Materials & Construction 8.1 Construction materials will be limited to exclude expensive “non-conventional” materials and manufacturing methods (a list will be issued). 8.2 The following components must be made from iron-based alloys: Valve springs, camshafts, crankshafts, connecting rods, piston pins, brake discs. 8.3 Engine crankcases and cylinder heads must be made from cast aluminium alloys. 8.4 Pistons must be made from an aluminium alloy. 9. General 9.1 Number of machines: the team can scrutineer only one motorcycle per rider. 9.2 Number of engines: a maximum of 2 complete engines per rider is permitted at any event. Teams will be required to register engine serial numbers at Technical Control on the day before the first practice. 9.3 Apart from the above regulations, all other construction criteria, dimensions and specifications are as per the FIM Grand Prix Regulations. 9.4 The engine (excluding exhaust, throttle bodies and ECU) used in a race is available to be purchased by another competitor in the same race for a fixed price of €20,000 (Euro). Such purchase request must be made in writing to Race Direction within the protest period, that is within 60 minutes after the official end of the race. The transaction and delivery will be completed immediately at the end of the 60 minute protest period and will be underwritten by IRTA. Teams refusing to sell when presented with a valid request will be disqualified.

Suzuki Motor Corp. President/COO Hiroshi Tsuda Steps Down, Chairman/CEO Osamu Suzuki Assumes President’s Responsibilities

Japan’s Suzuki Motor Corporation has announced that President and Chief Operating Officer (COO) Hiroshi Tsuda has asked to step down from his position due to illness and that Chairman and Chief Executive Officer (CEO) Osamu Suzuki would take on Tsuda’s responsibilities, according to Reuters. Read the article here: ~http://www.reuters.com/article/GCA-autos/idUSTRE4B91HR20081210~

Ducati North America Holding Custom Monster 1100 S Contest For Dealers

As the national premiere approaches, Ducati dealers get to work customizing. Cupertino, CA (10 December 2008) Ducati North America is pleased to announce a customization contest as part of the forthcoming Ducati Monster 1100 S showroom premiere. In order to launch the Monster 1100 S to the public in real monster style, Ducati has launched a dealer contest to see who can build the best custom Monster. As the original custom-ready naked bike, the new Monster 1100 S is ready for modifications, and the gloves are coming off in a contest to build the best. Fifty-eight dealers in the US and Canada have taken delivery of a body panel set in order to begin paintwork on the dealership’s dream Monster; and all have accessories in house waiting to be fitted on the dealership’s first bike. The results promise to be nothing less than spectacular and will launch the Monster with a bang. The Ducati dealers will have two weeks over the holidays to build their custom; and their bikes will be unveiled to customers over the National Premiere weekend, January 9-10th. The weekend will celebrate the individuality and personal expression inspired by Ducati’s original naked bike and highlight the vast potential of the Monster 1100 S. For a list of participating dealers, and to vote for the coolest custom Monster, please visit www.ducatiusa.com; where the contest will run January 1st through January 13th.

More On The United States’ Proposed 100% Tariffs On European Motorcycles And Scooters

PICKERINGTON, Ohio — The American Motorcyclist Association (AMA) today strongly criticized the Bush Administration’s consideration of a possible 100 percent tariff on a broad range of popular European motorcycles and scooters in retaliation for European Union (EU) restrictions on imported American beef. “In this tough recessionary climate, it’s ludicrous for the U.S. Trade Representative to even consider imposing a 100 percent motorcycle and scooter tariff, because the move will cost countless Americans their jobs,” said Ed Moreland, AMA vice present for government relations. “This very day, the Administration and the U.S. Congress are planning to bail out troubled U.S. automakers to the tune of billions of dollars to save American jobs,” Moreland said. “How, in good conscience, can the U.S. Trade Representative turn around and propose a measure that will spell the end of many motorcycle and scooter dealerships, and put their employees out in the street?” U.S. trade officials are looking at a list of more than 100 European goods for the possible imposition of 100 percent import duties in response to the EU’s ongoing import ban on American beef treated with growth hormones. EU officials haven’t lifted the 20-year-old ban despite a World Trade organization order to end it. Now the U.S. wants to impose $116.8 million in import duties to equal the amount of money it claims the U.S beef industry loses each year because of the ban. Included on the hit list are motorcycles and scooters with engines displacing 51cc to 500cc, representing popular on- and off-highway machines from brands such as Aprilia, Beta, BMW, Fantic, Gas Gas, Husaberg, Husqvarna, KTM, Montesa, Piaggio, Scorpa, Sherco, TM and Vespa. “In America, the majority of motorcycles and scooters under 500cc are sold through local dealerships,” Moreland said. “Collectively, these dealerships contribute to the employment of a substantial number of Americans working in sales, service, parts and general operations. Unjustified trade sanctions on European-produced motorcycles and scooters will choke off this vital business, dealerships will close at an alarming rate, and the negative effects will spread downstream through the aftermarket and recreational-equipment sectors, and even the motorsports entertainment industry. Countless Americans will find themselves without jobs.” The AMA sent comments to the Office of the U.S. Trade Representative by a Dec. 8 deadline to express the opinions of the Association’s 300,000 members on the possible tariffs. “It is simply unconscionable that motorcycles and scooters are on the list in the first place. They have no place in a trade war over beef,” Moreland said. “Furthermore, we find it tragically ironic that, as part of the auto bailout plan, federal lawmakers are considering requirements for American car makers to produce more fuel-efficient vehicles, and yet the motorcycles and scooters that the U.S. trade representative is considering for the 100 percent tariff get three to five times better fuel economy than many cars.” It is unknown when U.S. officials will decide on which European goods will be hit with the stiff tariffs. More, from a press release issued by Brandware PR, on behalf of Piaggio USA: Piaggio Group Americas, Inc. strongly opposes the recently proposed retaliatory action in conjunction with the EU-Beef Hormone trade dispute. According to a notice issued by the office of the U.S. Trade Representative (USTR), revisions are being considered to the list of meat and food products that currently have a retaliatory tariff imposed on them. Inexplicably, USTR is considering extending retaliatory tariffs to European motorcycles between 51cc and 500cc displacement. The recommendation is to add a 100% ad valorem tax to European-manufactured motorcycles and scooters that meet this displacement category an action whose chief victims would be Piaggio Group Americas, the New York, NY headquartered firm that is responsible for the Vespa, Piaggio, Aprilia and Moto Guzzi brands in the U.S. market, as well as its network of dealers and customers. Piaggio Group Americas, Inc. President and CEO Paolo Timoni has the following statement to make about these proposed changes to the EU-Beef Hormone dispute sanctions: “We urge USTR not to punish the U.S. employees of a healthy and growing personal transportation company, along with the 400+ U.S. dealers and employees that retail our scooters and small displacement motorcycles, when the only focus of this trade dispute is an agricultural product. We also urge USTR not to punish the American consumer who in rapidly increasing numbers is choosing to add these clean-running, fuel-efficient machines to their transportation fleets in order to reduce U.S. fuel consumption, foreign oil dependence and today’s massive congestion and environmental issues. Finally, we urge USTR not to impose measures that would quickly force Piaggio Group Americas and a significant number of its dealers out of business. “The intricacies of retaliatory tariff measures are not our bailiwick but serving the thousands of American consumers who have a passion for our products and the dedicated U.S. dealers and partners who retail and service them most certainly is. We encourage USTR to find more appropriate and relevant measures to settle its beef with the European Union.”

Parts Canada Superbike Championship Adds New Venue For 2009

TORONTO, Ont. (December 10) The Parts Canada Superbike Championship brings a new venue onto its 2009 schedule as the national road racing series makes a return to Quebec soil following a one-year absence. The event at Montreal’s ICAR Mirabel facility on June 11-14 will be the second round of the seven-race championship tour. Last August a number of the top Parts Canada Superbike Championship racers enjoyed a successful test at the venue, which has hosted regional car and kart racing events since opening in the fall of 2007. “Returning to Quebec was always the focus of our efforts for the 2009 season,” said Colin Fraser of Professional Motorsports Productions (PMP), which organizes the Parts Canada Superbike Championship. “We have had an ongoing dialogue with the ICAR Mirabel people for over a year and we were pleased with our test last August, where our riders were able to sample the tarmac in both wet and dry conditions.” The 2009 Parts Canada Superbike Championship once again opens at Calabogie Motorsports Park in Calabogie, ON, near Ottawa, and concludes at Shannonville Motorsport Park in Shannonville, ON over the Sept. 3-6 Labour Day Weekend. The Calabogie race, which debuted last season, will be run on the 5.05km (3.05-mile) Long Track rather than the 2.81km (1.38-mile) ‘Stadium Track’ that was used last year. The Shannonville event will once again be staged on the 2.45km (1.53-mile) ‘Pro Track.’ Following the debut event at ICAR Mirabel, the Parts Canada Superbike Championship will move west for a round at Calgary’s 3.2km (2.0-mile) Race City Motorsports Park on June 25-28. Mosport International Raceway, near Bowmanville, ON, will stage its traditional doubleheader July 16-19 on its world famous 3.9km (2.459-mile) circuit. The series then heads to the Maritimes for its penultimate round on Aug. 6-9 at the 2.56km (1.6-mile) Atlantic Motorsport Park in Shubenacadie, NS before concluding at Shannonville. AMP will be hosting its 25th Canadian Superbike national. “Once again our season will feature four classic Canadian road racing venues, each of which offers a different type of challenge to our racers and our teams,” said Parts Canada Superbike Championship race director Craig Johnson. “Calabogie was a popular addition to the schedule last year and we look forward to going back there. The layout we will be using will be the longest on the Canadian tour and it will add an exciting new dimension to the series. “Everyone involved in the championship thinks both Calabogie and ICAR Mirabel have the potential to become traditional stops on the Canadian tour for a long time, just like Race City, Mosport, AMP and Shannonville.” In addition to playing host to the Parts Canada Superbike feature class, each national round will stage races for the Yoshimura Pro 600 Sport Bike, Armour Bodies Amateur 600 Sport Bike, Canadian Thunder, Canadian Sport Twins, Suzuki SV650 National Cup and Honda CBR125R Challenge national support divisions. The series will also make its traditional visit to the Jennings GP circuit in Florida for the Official Pirelli Tire Test April 28-29. For the first time this test will be open to competitors in all classes of the Parts Canada Superbike Championship, after previously being restricted to factory Pro teams. The 2009 season will mark the 30th year of professional Superbike racing in Canada, and represents the start of a new three-year title sponsorship arrangement with Parts Canada, a relationship that dates back to 1997. “The Parts Canada name, along with Parts Unlimited and the new Parts Europe division, has become synonymous with racing worldwide,” Fraser said. “Our long association with Parts Canada has given our series a stability and security that is rare in motorsport. In these challenging economic times it is hard to overstate the significance of their contribution.” Additionally, earlier this year Pirelli renewed its deal to be spec tire supplier to the Parts Canada Superbike Championship for another three years. The 2008 season marked the successful debut of SuperPole qualifying, backed by Pirelli and Inside Motorcycles magazine. “Pirelli has made a tremendous impact since becoming our spec tire supplier in 2006,” said Peter Hooegeveen, technical director for the series. “They have consistently improved the quality of their product each season while providing a level playing field for our racers. Their on-site tech support, provided by staff directly from Italy, shows Pirelli’s commitment to the Parts Canada Superbike Championship.” Canadian Kawasaki Motors factory rider Jordan Szoke of Brantford, ON will head into the 2009 Parts Canada Superbike Championship season trying to become the first racer to win four consecutive national Superbike titles, and aiming to equal Steve Crevier’s all-time leading total of six Canadian number one plates. 2009 Parts Canada Superbike Championship Schedule April 28-29, Test Jennings GP Jennings, FL May 2124, Round 1 Calabogie Motorsport Park Calabogie, ON June 1114, Round 2 ICAR Mirabel Montreal, QC June 2528, Round 3 Race City Motorsports Park Calgary, AB July 1619, Rounds 4-5 Mosport International Raceway Mosport, ON Aug. 69, Round 6 Atlantic Motorsport Park Shubenacadie, NS Sept. 36, Round 7 Shannonville Motorsport Park (Pro) Shannonville, ON

Spies Second-fastest In World Superbike Test At Kyalami

HANNSPREE FIM SUPERBIKE WORLD CHAMPIONSHIP® KYALAMI DEVELOPMENT TEAMS TYRE TEST 1O/11/12 DECEMBER FIRST DAY Kyalami, Wednesday 10th December 2008 Fabrizio goes quickest on opening day of Superbike testing at Kyalami Michel Fabrizio notched up the quickest time with his factory Ducati 1098F09 on the opening day of Pirelli tyre development testing at Kyalami (South Africa). The winter tests are being used by almost all the top manufacturer teams in preparation for the 2009 FIM Superbike World Championship, which gets underway in Australia at the start of March. The Italian powered to a superb time of 1 minute 41.204 seconds, a tenth of a second under the unofficial circuit record set by Colin Edwards (Castrol Honda) in 2002 during the last edition of the South African round, which returns to the calendar next year on May 17th. “I’m really pleased because it’s the first time I’ve lapped on this track”, declared 23 year-old Fabrizio, who is about to embark on his second season with the Italian factory team. “I feel sure can go even quicker, I’ll try and do so in the remaining two days.” Another major surprise was second place for Yamaha Motor Italia’s American rookie signing Ben Spies, who ended up just a fraction behind. “I like this track; it’s almost like some AMA tracks and it’s not too technical, not that difficult to learn, but I was having a lot of fun riding on it. We were most interested in trying out the bike in hotter track conditions than in Portimao. The handling is good; the engine comes in really smooth exiting corners and it lays the power down well. Top end makes no difference in that situation and the engine really drives well from low down,” commented the 24 year-old Texan, a new face on the Superbike scene in 2009. It wasn’t a particularly good start on the factory Ducati for Noriyuki Haga, ex-Yamaha, who crashed three times on his debut with the 2009-spec Italian machine: the first after colliding with Jonathan Rea, the others due to a couple of mistakes, but the Japanese rider did manage to set fourth quickest time. Max Biaggi arrived in the circuit late at lunchtime, after the other riders had already had four hours of track time, due to a series of never-ending problems with his flight, which began on Monday evening and which lasted 36 hours instead of the scheduled 12. Despite this Aprilia’s new signing however did manage to get up to seventh place, 1.2 seconds off the pace, and just behind his equally impressive team-mate Shinya Nakano. “I really like the RSV4, today we just got warmed up, we’ll see where we can arrive in the remaining sessions”, declared Biaggi. Both Troy Corser and Ruben Xaus were not far off the pace either on their first day of testing with the new BMW S1000RR machines, the Australian in a respectable ninth place and the Spaniard in tenth. Day 1 times: 1. Fabrizio (Ita-Ducati) 1’41″204 (66 laps); 2. Spies (Usa-Yamaha) 1’41″599 (46); 3. Neukirchner (Ger-Suzuki) 1’41″713 (69); 4. Haga (Jpn-Ducati) 1’41″730 (31); 5. Kagayama (Jpn-Suzuki) 1’41″755 (39); 6. Nakano (Jpn-Aprilia) 1’41″846 (51); 7. Biaggi (Ita-Aprilia) 1’42″446 (29); 8. Kiyonari (Jpn-Honda) 1’42″744 (62); 9. Corser (Aus-Bmw) 1’42″975 (33); 10. Xaus (Spa-Bmw) 1’43″274 (41); 11. Checa (Spa-Honda) 1’43″418 (10); 12. Rea (GB-Honda) 1’44″496 (16); 13. Sykes (GB-Yamaha) 1’46″780 (16).

Alex Gobert’s Road Race Performance Academy Announces 2009 Calendar

Alex Gobert’s Road Race Performance Academy will travel nationwide in 2009, today releasing a packed calendar that will see Australia’s new era in rider training visit each and every state around the country. Following a successful introduction to coaching in the second half of this year, RRPA has been going from strength to strength, building on experience and attracting growing numbers of participants at each event. The circuit-based program will visit many tracks around the country, including circuits in New South Wales, Victoria, Tasmania, South Australia, Western Australia and the Northern Territory. Dates in Queensland are currently being finalised and will be announced as soon as they are 100% confirmed. Gobert’s Academy will introduce a recently announced all-new structure in the new year, with the full program consisting of Level 1 and Level 2 groups, while a cost effective Development Group will invite racers and returning riders to brush up on certain skills without undergoing the entire curriculum. RRPA’s revised structure is a result of feedback from this year’s courses, with the program now set to adopt one of the most innovative structures ever in rider training “” all designed to suit each individual’s skill level. ROAD RACE PERFORMANCE ACADEMY 2009 NATIONAL CALENDAR MONTH DATE DAY LOCATION January – February 2 Monday Oran Park GP, NSW March 21 Saturday Symmons Plains, TAS 27 Friday Mallala, SA April – May 15 Friday Broadford, VIC June 20 Saturday Oran Park South, NSW July 6 Monday Barbagallo, WA August 29 Saturday Hidden Valley, NT September TBC October TBC November 27 Friday Broadford, VIC December 21 Monday Oran Park South, NSW ALEX GOBERT: “To be able to offer our services all around Australia is a dream come true for me, and I’m sure that the states which don’t usually get the professional rider training programs visiting them will really appreciate it and jump at the opportunity to take part. We’ll also build on establishing RRPA further in our local states and continue to prove that we are a new era in rider training in this country.” Dates and entry forms are now up on RRPA’s website at www.rrpa.com.au. Stay tuned for other selected dates to be confirmed in the coming weeks.

DEWALT Power Tools Does Two-Year Deal With MotoGP

The world’s leading manufacturer of professional power tools and accessories, DEWALT, has joined the MotoGP World Championship as the MotoGP Power Tool Supplier for the 2009 and 2010 seasons, thanks to a new agreement with Dorna Sports. DEWALT power tools are to be used in the MotoGP paddock by Dorna’s operational staff working at the circuits. Established over 80 years ago, DEWALT’S reputation of designing, engineering and building tough industrial power tools and accessories, and delivering high performance to the professional tradesman, has earned the company market leadership in its native North America. With their commitment to providing jobsite solutions that continue to revolutionise the working methods employed by the construction industry, DEWALT is now the fastest growing supplier of professional power tools in the world and has remained so over the past five years. The new partnership with Dorna Sports will allow DEWALT to exploit the global marketing opportunities afforded by MotoGP and further enhance their brand position across Europe, the Middle East and Africa. DEWALT will also be present in the public area at most European Grands Prix to allow end users the opportunity to try products and truly understand their outstanding performance and productivity benefits. DEWALT’s Pete Morris, Vice President – Professional, Europe, Middle East & Africa, commented, ‘We are excited to announce our new partnership with Dorna and MotoGP. It is important for our brand to be associated with a high energy growth sport, with strong access to our target demographic and end users. This strategy is key to our DEWALT formula, as it promotes close end user engagement at the track and beyond.’ Dorna Sports’ Managing Director Pau Serracanta stated, ‘We are delighted to welcome DEWALT into the MotoGP World Championship paddock as our Power Tool Supplier. The company have strong links to motorsports and the quality of their products will be recognised by MotoGP’s ever increasing fanbase.’