Home Blog Page 2368

MotoGP: Michelin Bringing “Correct Solutions” To Handle Demands Of Catalunya Circuit

MONTMELO OFFERS UP ANOTHER NEW CHALLENGE FOR MICHELIN

Michelin takes the short journey across the Franco-Spanish border this week and heads to the heart of Catalunya as round seven of the MotoGP™ World Championship makes base for the weekend at Montmelo near Barcelona for the Gran Premi Monster Energy de Catalunya.

One of the more modern tracks on the calendar, the Circuit de Barcelona-Catalunya first became a MotoGP venue in 1992 and has remained a popular and regular event since then. With elevation changes, a kilometre-long straight, fast turns, hard braking zones and an imposing grandstand on the start/finish straight that provides an incredible acoustic backdrop on race-day, Montmelo is a must for any true MotoGP fan. Through fast, flowing turns where the edge of the tyre will be pushed to the limit, the rear MICHELIN Power Slick tyres will certainly be given an intense examination and to cope with these circumstances they will feature an asymmetrical design over all three compounds, with the right-hand-side having the harder rubber to manage the demands that the high-speed, sweeping corners will generate. Grip levels at Montmelo can also be compromised as the temperature rises, this along with the bumpy nature of the track, makes it a very demanding circuit and the front MICHELIN Power Slicks in the three compounds – all asymmetric with a harder right-hand side – will have to work extremely hard to cope with the stresses placed upon them throughout the weekend. The MICHELIN Power Rain tyres will also be available within the allocation to cope with any changeable or wet conditions.

This season will see a change to its revised 4,652m layout at Montmelo, with modifications being made to the last chicane to give riders a safer run-off area. This changes the track to a nine right-hand and seven left-hand bend configuration – the previous layout had five lefts and eight rights – these alterations have been adopted following the accident that happened there in last season’s Moto2™ practice when Spaniard Luis Salom was killed in a high-speed crash. With safety always a priority within MotoGP the layout was altered for the remainder of that weekend last year and has now been further assessed, with additional changes implemented for this coming weekend.

Situated just north of Barcelona near the town of Granollers, the Montmelo track has a habit of producing superb racing which is enjoyed by excited and knowledgeable crowds. With many Spanish riders in the race, some of whom originate from Catalunya – as well as being the home of Dorna – this year will no doubt be as passionate as ever. The track action for Sunday’s 25-lap race will begin with two free practice sessions on Friday. This will be followed by a further two sessions on Saturday, before the qualifying practices take place in the afternoon to decide the grid positions for race-day, which will get underway at 14.00hrs local time (14.00hrs CEST, 13.00hrs BST, 12.00hrs GMT/UST) on Sunday 11th June.

Piero Taramasso – Michelin Motorsport Two-Wheel Manager:

“The recent test at Montmelo was very informative and we were able to try many different tyres to see what works well there. The track can be quite hard on tyres and as the heat rises the grip levels drop, so with the test we worked hard on the compounds to see what would stop that without compromising overall performance. We now have a good direction for the type of compound that will perform at the track and as always, we will bring the correct solutions to make sure all the riders, bikes and teams have an equal opportunity to be competitive. The layout this year is also different so we need to take that into consideration, which means that having a chance to visit there and try the new design before the race was extremely useful. The event itself is a very impressive one, the track and organisation are both great and the fans that come to support the many Spanish riders make for a fantastic atmosphere. It has produced some exciting races in the past and hopefully we can have a weekend where the racing takes the spotlight and we see a good show.”

Southern California BMW Dealers To Offer Test Rides On Angeles Crest Highway

Southern California BMW Motorcycle Dealers Turn Up The Heat To Offer Test Rides On Angeles Crest Highway And Auto Club Speedway, June 24-25

Woodcliff Lake, NJ – June 8, 2017…No more California dreaming. This June, Southern California BMW Motorcycle Dealers are offering riders real-world opportunities to experience the comfort, safety, and performance features of BMW motorcycles on the road and track.

On Saturday, June 24, BMW Motorrad will present the full line of current models (including the West Coast debut of the new C Evolution electric scooter) for riders to demo on the challenging curves of Angeles Crest Highway – from the Valley floor to the picturesque mountains. Participants will also get an up-close look at the all-new 2018 BMW G 310 R, which will be on display. The Demo Day will be held from 8:00 a.m. until 2:00 p.m. at Newcomb’s Ranch, a gathering place well known to motorcyclists from all over the world.

For registration and information, visit:

http://www.socalbmwmc.com/newcombs-ranch-signup/

On Sunday, June 25, Southern California Motorcycle Dealers and Fastrack Riders will present the 5th Annual RR Fest at Auto Club Speedway in Fontana, CA. Top coaches and riders, including BMW Motorrad Motorsports Advisor and test rider Nate Kern, will help riders exploit the full potential of their S 1000 RRs in a safe, traffic-free setting during the full track day.

Street demo rides from the BMW Motorrad Demo truck line-up will be available at no charge to all qualified attendees, with on-track demo rides on a 2017 BMW S 1000 RR available to participants of the track day portion of the event.

The event, which is open to all brands and types of motorcycles, will feature vendors and demonstrations, as well as a custom bike show. A well-known DJ from the Long Beach Area will be spinning tunes all day to keep the crowd revved up.

Registrants for the track day can save $50 off the regular price of $279 and receive a commemorative T-shirt if they sign up at a Southern California motorcycle dealer. There is no charge for non-track day participants.

For registration and information, visit: http://www.socalbmwmc.com/2017rrfest/

BMW Group In America

BMW of North America, LLC has been present in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began distributing vehicles in 2003. The BMW Group in the United States has grown to include marketing, sales, and financial service organizations for the BMW brand of motor vehicles, including motorcycles, the MINI brand, and Rolls-Royce Motor Cars; Designworks, a strategic design consultancy based in California; a technology office in Silicon Valley and various other operations throughout the country. BMW Manufacturing Co., LLC in South Carolina is part of BMW Group’s global manufacturing network and is the exclusive manufacturing plant for all X5 and X3 Sports Activity Vehicles and X6 and X4 Sports Activity Coupes. The BMW Group sales organization is represented in the U.S. through networks of 342 BMW passenger car and BMW Sports Activity Vehicle centers, 152 BMW motorcycle retailers, 127 MINI passenger car dealers, and 36 Rolls-Royce Motor Car dealers. BMW (US) Holding Corp., the BMW Group’s sales headquarters for North America, is located in Woodcliff Lake, New Jersey.

Information about BMW products is available to consumers via the Internet at:

www.bmwmotorradusa.com.

Medical Update: Successful Surgery For M4 medAge Suzuki’s Nick McFadden

Medical Update On Nick McFadden

M4 medAge Suzuki rider Nick McFadden’s right collarbone (broken in a crash at Road America last weekend), was surgically repaired at San Gabriel Medical Center in San Gabriel, California on Wednesday, June 7th by orthopedic surgeon Dr. Tom Bryan.

Dr. Bryan said, “I was able to easily access the fracture, contour the titanium plate and achieve a perfect repair.”

M4 medAge Suzuki team physician and medAge founder Dr. Laura Ellis added, “Dr. Tom Bryan came highly recommended and has many years experience getting injured riders back on the track. He understands the need for a strong repair and that’s what Nick got.”

Nick himself said, “I’m relieved to be fixed. Dr. Bryan has taken care of many of my fellow racers so I know he is one of the best. I look forward to getting back on the bike as soon as possible.”

About Team Hammer

The 2017 season marks Team Hammer’s 37th consecutive year of operating as a professional road racing team. Racebikes built and fielded by Team Hammer have won 66 AMA Pro and MotoAmerica National races, have finished on AMA Pro and MotoAmerica National podiums 166 times and have won five AMA Pro National Championships, as well as two FIM South American Championships. The team has also won 134 endurance races overall (including seven 24-hour races) and 13 Overall WERA National Endurance Championships with Suzuki motorcycles, and holds the U.S. record for mileage covered in a 24-hour race. The team also competed in the televised 1990s Formula USA National Championship, famously running “Methanol Monster” GSX-R1100 Superbikes fueled by methanol, and won four F-USA Championships.

MRA Racing At High Plains Raceway This Coming Weekend

Denver, CO – The MRA returns to High Plains Raceway this weekend, June 10-11, for Round 3 of it’s 2017 Championship Season. Join us for non-stop high octane excitement as the fastest riders in the region race head to head on everything from 250cc production motorcycles to 200 horsepower superbikes on HPR’s 2.5 mile Full Course!

Racing action starts at 10:00 am both days. Admission is only $12 for adults and is good for the whole weekend. Kids under 12, military personnel, law enforcement and emergency responders are free! Stop by any Colorado motorcycle dealership for a 2-for-1 admission pass and then bring a friend. Spectators are welcome to walk through the pits to see the riders and machines up close.

The SuperStreet program will run this weekend for those riders that want to take it to the track and work on their technique during a race weekend. Maximum SuperStreet riders per weekend will be limited to 26 and the spots are filling up fast! More information about this program and how to get started can all be found online on our website – http://www.mra-racing.org/superstreet/superstreet…

High Plains Raceway – http://highplainsraceway.com/

93301 E Highway 36, Deertrail, Colorado 80105

For a daily schedule of races go to: http://www.mra-racing.org/schedule/race-day-sched…

The Motorcycle Roadracing Association is dedicated to promoting safe and competitive motorcycle road racing events for enthusiasts in Colorado and the surrounding area. For more information, go to http://www.mra-racing.org/

Ryan Sutton Earns Pirelli Bounty With New Track Record At The Ridge Motorsports Park

Ryan Sutton Captures Pirelli’s Third Track Bounty of the 2017 Season at The Ridge Motorsports Park

ROME, Ga. (June 7, 2017) – Today, Pirelli Tires North America announced that Ryan “Chromie” Sutton captured the brands third track bounty of 2017 by setting a new absolute motorcycle track record at The Ridge Motorsports Park in Shelton, Washington. The accomplishment took place during the Washington Motorcycle Road Racing Association’s (WMRRA) third round of the season on Saturday, May 27th. Sutton, who was competing aboard a 2016 BMW 1000RR, set the record just one week after Adam Robarts claimed two track bounties for Pirelli at Mission Raceway Park.

“I’m very appreciative of the support I’ve received from DJ Griffin at Moto G Racing in 2017,” said Ryan Sutton. “The Pirelli DIABLO™ SUPERBIKE Slicks are amazing tires and I’m looking forward to continuing my progression each time out on the track and have my sights set on capturing more track records this year.”

Sutton’s No. 51 BMW motorcycle was equipped with Pirelli’s DIABLO SUPERBIKE Slicks, featuring a SC1 front and SC0 rear tire. He used a blistering pace to lay down a new best lap time of 1:38.709 on Lap 7 of the Formula Ultra race and eclipse the previous track record of 1:38.807 that was held by Robarts. He was leading the race until a mistake sent him off of the track on Lap 3, eventually rejoining the race and mounting an impressive charge to earn a hard-fought sixth place at the checkered flag.

“I have been fortunate enough to work with Chromie [Ryan Sutton] over the years, dating back to my time servicing the Northwest region,” said Oscar Solis, Pirelli Road Racing Manager. “It’s a pleasure to see that Ryan is still progressing and settings track records. The BMW is a new motorcycle for him this year and I expect him to continue getting stronger and more comfortable with time on the bike.”

To learn more about the complete line of Pirelli motorcycle tires, please visit click here.

MotoAmerica: The Final Round Of Press Releases From The Races At Road America

Home race for Genuine Broaster Chicken concludes in positive progress

Elkhart Lake, WI – Road America, The National Park of Speed was the setting for the fourth round of the MotoAmerica Superbike Championship. The only way to really understand the grand scale of the track is to be there. It’s a tired cliché, but it’s the truth when referencing this massive facility dedicated to those willing to push their machines and their own bodies to the limits. It is the longest track on the schedule and its perhaps the most idyllic; if open green spaces set in a lush rolling landscape surrounded by hiking trails through the trees is your kind of scene. However, when things are this good, there must always be a downside. For Road America, the downside can be the weather. At the track, it is completely possible to have all four seasons within the same day sprinkled with a persistent threat of tornadoes. Soooo… you take the good with the bad and twist the throttle to full stop and just enjoy the splendor of Wisconsin’s Cathedral of Racing. From a fan’s perspective, it is a complete experience.

The team rolled into Road America after a much need break. The crew was able to have the bikes back in their own shop and conduct some critical maintenance and upgrades. These upgrades added some desperately needed horsepower ahead of the largest track in the series. While it was great to have the bikes home and being worked on, there is still the element of testing these parts under race conditions. Until that can happen on a regular basis, the crew will continue to play the guessing game and hope that they can get a fast machine right off the truck.

However, in what is becoming the norm, the first session of the weekend is more about wrenching than riding. So far this season Jake and the 32Crew average roughly 10 laps in Free Practice One. This is an issue that is the result of a few compounding issues. The short version is that this is still a very new motorcycle with very few hours on it, almost no testing, parts continue to come in and parts continue to be fabricated. All that to say that the first practice session has become the “test” for new electronic settings and components for Jake. This weekend was no different. Jake only completed eight laps and wasn’t really able to develop a solid feeling ahead of Free Practice Two later that day. It’s extremely critical that riders maximize their time on the track during these first two sessions as they set the grid for Superpole, so the sense of urgency is real.

Free Practice Two was more like the team is used to seeing. During the break, the 32Crew led by crew chief Scott Jensen, worked to solve the problems that cropped up in the morning. Jake was turned loose to set some fast laps around this massive 4 mile circuit. Knowing that the bike would be down on horsepower, it was more important to establish consistent laps at a pace where Jake could push the new CBR 1000rr SP2 to its limits. And that is what he was able to do. With a more rhythmic pace of 5-7 laps out then in, 5-7 out then in, Jake was able to climb from the bottom of the timing sheets to grab a solid P8 in the closing moments of the session to snag a ticket to Superpole.

Saturday arrives with an ominous distant thunderclap. The ride to the track was a feat in and of itself with the rain falling so hard the locals were pulling over on the highways into the track. As was mentioned above though, if you don’t like the weather wait a minute and it’ll change. Sure enough the weather did change. By the time Free Practice Three was set to go off, the rain had stopped but was still lurking about. The track was wet/dry/damp/slick/meh. Not ideal for a final push before Superpole to see if things were sorted out in the overnight maintenance. The decision was made to go out for that session on wet tires as the conditions were mixed. It turned out that wasn’t the right call as Jake had completely shredded those rain tires three or four laps into the session. When Jake came back into the pits, the decision was made to just not risk any damage to Jake or bike when the track would be completely different for the race. Save it for Superpole.

Less than an hour later, it was time to make the magic happen. In the hurried atmosphere of Superpole, riders and teams only have a few laps to make their mark on the starting grid. When the track is as big as Road America, a 15 minute session yields no more than 7 laps so everything counts. With the weather “iffy” but holding at dry, Jake went out for a few laps on the Dunlop Pre-Qualifier to really shake down the settings. Coming into the pit for the tire change there was no time to make anything more than the tiniest of suspension changes before roaring back out. Jake got his flying in at the last possible moment and was able to secure P9 on the starting grid. Not where he wants to be, but given the circumstances of the weekend, it was the best the team could manage.

Race one was slated for later that day and as luck would have it the weather decided to fully cooperate. The sun came shining out from behind the clouds and the temps soared back into the 80’s. Taking his place on the gird, Jake was eager to get the race started. The horns go off indicating to all personnel to clear the track and once the umbrella’s are folded and the crews are safe behind the barriers, it’s visors down for one last lap before the symphony begins. The grid rounds the track and return to their starting positions. Engines revving and all eyes focus on the lights. Lights hold, hold, hold, then go out and the field lunges forward down the straight towards Turn One. Jake made a decent start but was never able to break from the mid-pack and had to fight for some space through the next series of corners. Jake was able to hang with the tail end of the chase group for much of the first half of the race, but by the midpoint, he would be riding alone in P9. It was evident from watching him on track that there was an issue with his set-up that couldn’t have been flushed out in the limited time the team had on track leading up to the race. Despite this, Jake was setting good solid lap times and was gaining confidence on the bike around this circuit. Jake would finish in that solitary ninth position but more importantly he had gained a clearer understanding of what the Genuine Broaster Chicken / Honda wanted and he was able to effectively communicate that to his crew.

Sunday’s are always big days. Even though there is racing on Saturday, Sunday’s still feel bigger! Hard to explain, but there’s just that sense of “This is the day we’ve all been waiting for!” The teams were given an extended warm-up to try a new compound of tires for Dunlop and those extra 15 minutes were precious to the 32Crew and to Jake. The changes based on Race One data seemed to be in the right direction. Jake was confident that he could make a jump in the standings for Race Two. Following an amazing turnout for the Dunlop Fanwalk, it was time to suit up and head out for Race Two. Same protocol as always; crews on the grid ushered out by air horns and track officials, umbrella girls running in heels to get over the barriers and riders oblivious to it all as they center themselves on the task at hand. Once Jake made the warm-up lap and took his position on the starting line everything faded away. Again, the lights are on and then they aren’t. Signaling the start of race two.

Everything was going great until the bottom of Turn 5 where Jake Lewis had a massive high-side. His bike stayed on track and was hit by Bobby Fong who was then thrown to the track and run over by Mathew Schotlz. It was brutal to watch and when the red flags came out all anyone could do was wait to see if everyone was ok. Luckily there were no injuries and only Bobby was unable to make the restart. Race Two was re-staged and all the riders had to find that adrenaline again for a full race restart. This time Jake would make a better start and remain in the main pack for the first couple of laps. Jake’s pace was holding steady until an uncharacteristic mistake entering Turn One caused him a few positions. He snagged the double draft and got into T1 a few miles an hour faster than he had previously and missed his braking markers. Jake would have it all to do over again as he lost about four places. However, a flash of the real Jake he recovered and was soon climbing back up through the field. His pace was actually on par with those fighting for podiums. He had clawed his way to P6 and given his pace, P5 wasn’t too far from reality. Just as soon as he was clear of the group and had open track ahead of him to hunt down P5, Josh Herrin’s Yamaha exploded going down the front straight with three laps to go. The race was red flagged which took all riders back to the previous lap and that put Jake back down the order to P8.

That was a tough one, but that happens in racing. For all his and his crew’s hard work, the reward was the show of speed and pace at the end of Race Two. When you’re developing new machinery you have to take the positives and drive forward. In this case, it was clear that their changes had given Jake a bike he was more competitive on and that is massively encouraging going into Utah in two weeks’ time. From here the team will go home to Colorado. Hopefully there will be boxes of more go fast parts and time to install them.

Jake Gagne – Superbike

“I was pretty excited to be coming back to Road America. The team and I have always run pretty well here. I scored a few double race wins here and I really like this track so I was pretty pumped to see how this Honda would go around this big track.

This weekend was pretty crazy. We lost almost the entire first session so we had to come from behind but we made it to Superpole with a good second practice. I went alright in Superpole but didn’t quite get the flying lap I was looking for. Losing the track time hurt when getting the bike properly set-up. So I qualified 9th which wasn’t great, but I felt good that I could make up some ground.

Race one didn’t really go as well as we had hoped. I made a pretty good start but quickly realized I wasn’t going to be able to make a run with the leaders. I began to lose contact with those guys and did all I could to bring the bike home.

Race two was a different story. The first start was pretty decent but when we had to restart, I didn’t make the greatest launch. But I could tell that the improvements Scotty, DA and Evan made were going to work. I was running well but got into T1 a little hot and lost some ground. This was the first time though that I felt like I had the bike to make the pace I wanted. I was making passes and gaining positions and worked up to sixth. I was getting clear track when the second red flag came out. I was bummed because I knew that I could get closer and I was feeling great.

So in the end, the results aren’t great but we really feel that the improvements we found this weekend are going to carry this Genuine Broaster Chicken / Honda further and further. I think we turned a corner in the development and I’m looking forward to Utah.

Danny Walker – Team Principal

“This was a great weekend for us when you look at it from the complete perspective. First off, it was our title sponsor’s home race and they really came out in an awesome show of support for our efforts. Genuine Broaster Chicken has been taking on more of an active role not just in the team but the series and we were thrilled to have roughly 30 of their corporate employees join us here this past weekend.

With respect to the racing, this place holds a special place in our history and in Jake’s personal records. He runs strong here and we’ve typically kicked serious tail as a team at this track. This weekend, we knew we had a pretty big row to hoe. We understood that but we were happy with the work the crew had done while at home during the break. We were playing catch-up again most of the weekend and that was a bit frustrating, but in reality, we weren’t too far off. Again, it’s little things that make a big difference and what we saw in Race Two was the most encouraging aspect of the weekend with respect to Jake’s pace after running wide.

We saw that Jake was able to put his head down and hammer out some really fast laps. His times would’ve had him running within the top five! That’s awesome and shows we’re making great progress with this new Honda.

Now we go home, hope to see some boxes from Japan and get ready for Utah. Which if you know your RoadRace Factory history, is not our favorite track. Let’s hope we can start a new chapter there and come out closer to the top guys.”

Scott Jensen – Crew Chief

“Road America is always one of our favorite stops on the MotoAmerica schedule. From the great fans to the always challenging weather, the event is always memorable. We as a team have had some great success over the years at this track and always enjoy coming to this event.

The weekend started off with us trying out some new clutches on the bike which ended up taking most of the first couple practice sessions to get adjusted to the way we wanted. Practice three, we came out on rains (tires) as it was looking like the rest of the day would be wet. We opted for that set-up and it wasn’t the right way to go. Superpole was on a dry racetrack and with us struggling with a few settings on the bike we unfortunately were only able to manage a 4th row starting position.

Race one and race two look like very similar results but were in reality dramatically different for us a team. Race one saw us with some set-up issues and Jake doing a fantastic job riding as always. Race two, on the other hand, saw us with a dramatically more competitive bike and Jake being able to run very competitive times. However we were not able to show this in the results due to a small mishap (running wide in turn one) and a couple of red flags that saw the race shortened which hampered Jake’s ability to run closer up to the front.

Leaving Road America we are very positive and optimistic about the advancements we are making with the 2017 CBR1000rr SP2 and we are very eager to start showing how competitive this bike really is!” 

More, from a press release issued by TSE Racing:

TSE Racing competed in the MotoAmerica races this past weekend at Road America, which happens to be their home track. TSE Racings regular riders, Stefan Dolipski, Carl Soltisz and Peter Bernacchi joined forces with Brandon Paasch this past weekend.

Brandon Paasch: “This past weekend was a huge learning experience. My first weekend on a Yamaha R6 and my first weekend riding for TSE racing. Every session got better and better, the more I learned how to ride the bike and learned how to work with the team the times started to drop. The first race was a tricky one, starting wet on rain tires and ending dry, still on Rains. I wound up finishing 10th and learning a ton in my first race on the R6. Race two we had perfect weather, and battled the whole race for 4th with Benny Solis, but wound up finishing 5th. Overall, it was an amazing weekend of learning the team, bike and track! I cant thank everyone that got me there and helped me while I was there enough, without you guys (TSE Racing) I probably wouldn’t have been able to race. Hopefully I see everyone at Miller!!”

“We were approached the weekend prior to Road America about Brandon needing a ride for this last weekend.” Meghan Ryan Team Manager stated. “We had the R6 that Cory West rode in the Daytona 200 earlier this year ready to go and decided that we could make this event happen for Brandon. We knew the bike would be down a little on power as the rules packages for the 2 different organizations where different and the bike wasn’t up to a full Supersport spec. Brandon rode his heart out and did an amazing job this past weekend. He fit in great with the whole team and we hope to work with him some more yet this year. The team as a whole did a great job this weekend. Carl and Peter, competing in Superstock 600 both started their weekends with electrical problems, that we sorted out before race time. They both missed some valuable track time the first day but managed to keep their heads up and push through. Stefan also struggled with some setup issue at the start of the weekend that we were able to sort out with the help of BMW.”

Stefan Dolipski: “Im excited to have been back racing with motoamerica this past weekend at road America, one of the greatest tracks in the US. As Always the TSE crew performed and helped me in any way possible. I’m happy with two 10th place finishes and look forward to race again.

Thank you to the TSE team as well as BMW Motorrad for technical support”

In german :

“Ich bin sehr glücklich wieder in der amerikanischen motoamerica klasse gefahren zu sein. Wie immer hat das TSE Team großartige Leistung und Unterstützung gebracht. Ich freue mich schon auf das nächste Renn Wochenende. Vielem Dank dem TSE Team und auch BMW Motorrad für die technische Unterstützung.”

Carl Soltisz: “I suffered a little starting far back on the grid thanks to a crash in the rain soaked qualifying session and a technical infraction in race 1, but was still able to achieve some good results in the races where it mattered most. Despite some tricky drying track conditions in race 1 I had great confidence in the bike and pushed my way up to finish 8th in class. We went the wrong way with a gearing change in race 2, but I’m happy with how I rode considering, setting my fastest lap of the weekend and scoring some solid points 9th place in class. I want to thank the entire TSE team and all my sponsors for giving me an awesome package to work with this weekend and I would also like to thank all the fans that came out to support us.”

Peter Bernacchi: “It was great to make my first MotoAmerica race at Road America, which is always a blast to ride. I had some mechanical issues with my bike, but the expertise of the TSE Racing team solved them quickly and kept me in the mix. The level of competition is higher than what I’m used to at a club race, but I’m glad to have finished both races and clicked off a personal best lap at RA. Looking forward to some more tweaks and better pace for my next races this summer!”

British Superbike: Honda’s Jason O’Halloran Fastest During Official Testing At Snetterton

Honda Racing back on top: O’Halloran tops Snetterton official test

Honda Racing and Jason O’Halloran were back on top of the MCE Insurance British Superbike Championship at today’s (Wednesday) official test at Snetterton as the Australian set the pace ahead of next weekend’s fourth round at Knockhill.

In the afternoon session O’Halloran upped his pace despite the blustery conditions at the circuit where he claimed his first MCE BSB race win last year, to better his 2016 qualifying lap time at the Norfolk circuit on the new Honda Fireblade.

O’Halloran’s pace-setting lap was just 0.095s faster than the closing Be Wiser Ducati of Glenn Irwin as he returned to action in Norfolk with the local contenders RAF Reserves Kawasaki locking out third place with Jake Dixon.

Defending champion Shane ‘Shakey’ Byrne was fourth fastest on the second of the Be Wiser Ducatis with Czech contender Jakub Smrz having a strong afternoon session in fifth place. The fastest rider from the morning sessions, American John Hopkins ended the day sixth fastest for the Moto Rapido Ducati team.

It was a tough day for the championship leading JG Speedfit Kawasaki squad; standings leader Leon Haslam was forced out of action by a technical problem, leaving Luke Mossey to fly the flag at his home circuit, setting the seventh fastest time.

Dan Linfoot on the second of the Honda Racing machines was eighth fastest with Billy McConnell and James Westmoreland completing the top ten on combined times.

MCE Insurance British Superbike Championship, Snetterton, Official Test, combined:

1. Jason O’Halloran (Honda Racing) 1m:48.297s

2. Glenn Irwin (Be Wiser Ducati) +0.095s

3. Jake Dixon (RAF Reserves Kawasaki) +0.316s

4. Shane Byrne (Be Wiser Ducati) +0.352s

5. Jakub Smrz (Lloyd and Jones PR Kawasaki) +0.365s

6. John Hopkins (Moto Rapido Ducati) +1.217s

7. Luke Mossey (JG Speedfit Kawasaki) +1.517s

8. Dan Linfoot (Honda Racing) +1.744s

9. Billy McConnell (Quattro Plant FS-3 Kawasaki) +1.799s

10. James Westmoreland (Gearlink Kawasaki) +1.848s

For more information visit www.britishsuperbike.com


Jason O’Halloran

Honda Racing

Fastest rider at Snetterton official test

“It has been a really positive day for us here at Snetterton. We have continued with our work from Oulton Park where we had our first podium of the year and I felt much more comfortable and confident there.

“I felt good straight away and the team have done a fantastic job. It allowed us to work on the chassis today with a new component and that felt really good. We have also been working on the harder tyre and then made a good step too with the softer tyre too, so that will help us later in the year.

“It felt good to see P1 back on the pit board at this test and I feel that we are ready for Knockhill next weekend where we want to be fighting for more podiums!”

Kawasaki’s Z125 Pro Returning For 2018

KAWASAKI Z125 PRO

KAWASAKI’S MOST NIMBLE BIKE RETURNS

Returning for 2018 model year is the highly acclaimed bike designed to conquer the city, the 2018 Kawasaki Z125 PRO motorcycle. Regardless of your riding experience or how much gas money you have in your pocket, the Z125 PRO is designed to amplify the thrill of riding. For 2018, the Z125 PRO is available in a new color, Metallic Courage Gray and a new special edition available in Candy Plasma Blue/Metallic Spark Black. Returning for 2018 is the Kawasaki Racing Team (KRT) Edition in Lime Green/Ebony.

  • Large 2-gallon tank
  • Low seat height (31.7 inches)
  • Performance suspension suitable for comfortable and sporty riding
  • Capable of two-up riding
  • Compact size and light weight (224.8 lbs wet) makes for easy maneuverability

The Z125 PRO is a visually striking motorcycle with styling that’s a little on the dark side. It not only has edgy looks, but it’s also a blast to ride. It fits into that perfect package for those desiring a small motorcycle with plenty of capabilities, low price and great gas mileage. Thanks to the performance-oriented suspension, easy maneuverability and high fun level, it’s also a motorcycle you won’t soon outgrow. The Z125 PRO was built for the pureness of the riding experience.

With a user-friendly seat height of 31.7 inches and a low weight of 224.8 pounds, the Z125 PRO is one of the lightest and nimblest road bikes you’ll ever own. Its lightweight and low seat height also makes it easy for almost any rider to maneuver. The chassis of the Z125 PRO is designed to accommodate two-up riding and with the large two-gallon fuel tank, it’ll keep you on the road longer between fuel stops.

The multi-reflector headlamp throws a clear beam of light, facilitating illumination. Compact engine shrouds contribute to the bike’s hourglass figure as well as its overall aggressive design. The side shrouds also offer a degree of wind and road protection.

The ignition switch is located, à la Z, at the front of the tank, adding to the bike’s sporty image and tidy cockpit design. 

ENGINE

The Z125 PRO’s single-cylinder, 4-stroke SOHC engine displaces 125cc thanks to its oversquare 56.0 x 50.6mm bore and stroke. The 125cc engine is tuned for street riding with an exciting and sporty, yet easy to ride power delivery. Unlike most small-displacement enginesthe engine of the Z125 PRO features digital fuel injection with a 24mm throttle body, for smooth operation and quick starts.

The 2.6-liter air box is positioned above and forward of the cylinder head, contributing to the sporty power feeling and helping to minimize intake noise. Cam profiles and intake port design also contribute to the smooth, quick-revving engine character, as well as stable idling.

The Z125 PRO motorcycle has easy, consistent starts thanks to its electric start, digital fuel injection and the Kawasaki Automatic Compression Release (KACR),which utilizes the exhaust valve to release cylinder pressure during starting.

The Z125 PRO uses a four-speed transmission with a manual clutch and clutch lever. It has a very easy, light clutch-lever feel and positive engagement. Shifting comes through a link-type shifter lever very similar to that of a full size sportbike, so that the Z125 PRO’s shift lever requires little load pressure to engage, another major plus for riders.

CHASSIS & SUSPENSION

The compact chassis, along with sporty suspension and tires, enable riders to enjoy the light, nimble handling one would expect from a Kawasaki Z motorcycle.

Up front are the aggressive 30mm inverted front forks, which show you it means business. The forks feature nearly 4 inches of travel and excellent rigidity while keeping unsprung weight low for sporty riding. Up top is a lightweight aluminum upper triple clamp.

The single shock rear suspension is offset for a compact package and sporty handling. The shock’s mounting angle is optimized for the Z125 PRO for superb shock action and great ride comfort. The rear shock has 4-way preload adjustability, which allows riders to set the spring preload for their weight or to accommodate a passenger. Contributing to the sporty characteristics and looks are the 12-inch cast aluminum wheels, which cut down on unsprung weight and are wrapped in 100/90 and 120/70 tires front and rear. The tire sizes and tread patternwere chosen to optimize the Z125 PRO’s light and nimble riding characteristics.

The Z125 PRO is built on a high-tensile, steel backbone frame with sufficient tube diameter to enable two-up riding. The frame backbone measures 48.6mm in diameter and is supported by 25.4mm lateral tubes. The rear frame tubes are 22.2mm in diameter. The Z125 PRO also features a highly rigid box-section swingarm.

BRAKES

The Z125 PRO features hydraulic disc brakes front and rear with Nissin calipers. Up front is a 200mm petal-style disc and a 184mm petal-style disc on the rear wheel.

Color:

NEW The 2018 Z125 PRO will be available in three colors:

  • Metallic Courage Gray
  • “Special Edition” Candy Plasma Blue/Metallic Spark Black
  • KRT Edition Lime Green/Ebony

KAWASAKI Z125 PRO

Color: Metallic Courage Gray

MSRP: $3,199

Availability: Now

KAWASAKI Z125 PRO SE

Color: Candy Plasma Blue/Metallic Spark Black

MSRP: $3,399

Availability: Now

KAWASAKI Z125 PRO KRT Edition

Color: Lime Green/Ebony

MSRP: $3,399

Availability: Now

ABOUT KAWASAKI

Kawasaki Heavy Industries, Ltd. (KHI) started full-scale production of motorcycles over a half century ago. The first Kawasaki motorcycle engine was designed based on technical know-how garnered from the development and production of aircraft engines, and Kawasaki’s entry into the motorcycle industry was driven by the company’s constant effort to develop new technologies. Numerous new Kawasaki models introduced over the years have helped shape the market, and in the process have created enduring legends based on their unique engineering, power, design and riding pleasure. In the future, Kawasaki’s commitment to maintaining and furthering these strengths will surely give birth to new legends.

Kawasaki Motors Corp., U.S.A. (KMC) markets and distributes Kawasaki motorcycles, ATVs, side x sides, and Jet Ski® watercraft through a network of approximately 1,100 independent retailers, with close to an additional 7,700 retailers specializing in general purpose engines. KMC and its affiliates employ nearly 3,100 people in the United States, with approximately 260 of them located at KMC’s Foothill Ranch, California headquarters.

Kawasaki’s tagline, “Let the good times roll®”, is recognized worldwide. The Kawasaki brand is synonymous with powerful, stylish and category-leading vehicles. Information about Kawasaki’s complete line of powersports products and Kawasaki affiliates can be found on the Internet at www.kawasaki.com.

Kawasaki Releases Updated 2018-Model KX250F

THE NEW KX™250F RETURNS WITH EVEN QUICKER LAP TIMES

The dominating Kawasaki KX™250F motorcycle returns for 2018 with a list of enhancements to keep the KX250Fon top as the single-most dominant motocross bike of the last decade. The 2018 model offers an updated engine for an improved torque feeling throughout the rpm range, as well as improved holeshot performance. The KX250F still features a lightweight, slim and rigid chassis, but now features revised suspension to deliver improved bump absorption and suspension action. These improvements all mean one thing: faster lap times—the 2018 Kawasaki KX250F was found to have significantly faster lap times on the Kawasaki test track compared to the 2017 model.

The 2018 Kawasaki KX250F:

Improved power and torque throughout the rev range

Improved suspension settings for better compliance, resulting in quicker lap times

This year’s KX250F is built with race-winning components to help Kawasaki riders get to the top step of the podium. From the showroom to the racetrack, the performance of Kawasaki’s KX™ family of motorcycles is proof of its engineering pedigree. It truly is the Bike that Builds Champions.

ENGINE

New throttle body and fuel injector angle, for increased torque feeling throughout rpm range

New fuel pump with increased output pressure

New intake boot

New intake camshaft

New cylinder head with revised intake tract and compression ratio (13.4:1)

New exhaust header with longer and larger piping

Highly acclaimed for its high output and smooth power delivery, the KX250F motorcycle is back with new tuning and improved performance. Tuned to best suit race-experienced riders, the 249cc liquid-cooled, 4-stroke single’s wide power-band focuses on high-rpm performance that extends way into the over-rev. Riders will feel more power from low to high rpm, and experience improved over-rev characteristics.

Entering its second year after a major redesign, Kawasaki engineers concentrated on fine-tuning the 2018 KX250F’s performance in multiple ways. The intake path has been revised with a shorter intake funnel and redesigned duct. Intake valve timing has also been advanced. The KX250F features a new fuel pump with increased output as well as a new injector placement angle, bringing more precision and improved performance. The Fuel Injection system and ECU also now have revised settings, providing performance the rider can feel at the flick of the throttle. The exhaust header is now larger and longer, further increasing torque and power output, while retaining the resonator chamber.

These changes have improved the power feeling from ultra-low to high rpm—the engine feels stronger at all rpm. The 2018 KX250F motorcycle also features improved over-rev characteristics, resulting in less rpm drop when shifting, keeping the bike in the sweet spot of power while trying to cut the fastest lap possible. While power and torque have improved, the KX250F is also now easier to use in high-rpm operation.

The dual-injector fuel injection system of the KX250F is a key component to its performance; the 2012 KX250F was the world’s first production motocross bike to use such a system. Unlike a standard fuel injection system, which uses one injector downstream of the throttle valve, the system on the KX250F motorcycle uses a second, upstream injector located close to the airbox. The downstream injector is used to help ensure smooth, instant response featuring a finer atomization with more holes in the injector itself. The downstream injector creates that stronger low-to-mid range power and quick throttle response, while the upstream injector is charged with providing top-end power.

As rpm and throttle position increase, primary operation switches from the downstream injector to the upstream injector, depending on whether in a low (1st, 2nd) or high (3rd, 4th, 5th) gear, the transition is gradual and seamless. The upstream injector’s greater distance from the combustion chamber gives the fuel particles and intake air more time to mix, as well as allowing the mixture to cool before entering the combustion chamber, both of which contribute to more efficient filling, and ultimately more power.

TUNING

Lightweight ECU, with revised settings

DFI® Connectors activate three separate engine tuning maps (standard, hard, soft)

Optional KX FI Calibration Kit (Handheld) requires no tools, laptop or battery

The lightweight ECU of the KX250F motorcycle was designed specifically to withstand the rigors of motocross racing, while still providing a wide variety of tuning options. The Kawasaki KX250F provides three engine maps that come pre-loaded into the motorcycle’s ECU that are easily accessible through the DFI® coupling plug. These three color-coded couplers are designed to tune for hard, medium or soft track surfaces, and allow riders to find the ideal power delivery for a particular terrain.

Using the optional KX FI Calibration Kit (handheld), sold separately as a Kawasaki Genuine Accessory, a rider can store and select from up to seven separate engine maps. The kit includes a portable handheld calibration tool, which enables riders to make changes to the engine maps without the need of a PC, laptop or battery, making it easy to tune at the track. The handheld calibration module plugs in thanks to an additional harness not included in the kit.

FRAME & SUSPENSION

Lightweight, aluminum perimeter frame design

Showa 48mm Separate Function Front Fork (SFF Type 2)

Unchanged since the introduction of a new frame in 2017, the slim chassis design contributes to light, nimble handling. The flat seat makes it easy for riders to shift their weight, offering a high level of riding freedom. New for 2018 are fine-tuned front and rear suspension settings that deliver improved bump absorption, which result in improved handling. Kawasaki test riders found improved times in tight and open sections of the Kawasaki test track.

Up front you’ll find revised Showa 48mm Separate Function Front Forks (SFF Type 2) with works-style internal construction that locates its damping assembly in the left fork tube and a spring in the right. The Separate Function Front Fork construction contributes to a planted feel at the front, superb damping performance and ride comfort with greater bottoming resistance. It also has excellent agility when on the brakes or when landing jumps. For 2018, revised settings contribute to greater precision over braking bumps and through corners.

The Uni-Trak® rear suspension with Showa shock features revised settings, new for 2018. These changes contribute to improved ride feel, traction, and increased rear-end feedback. The rear shock linkage mounts are below the swingarm to maximize wheel travel and cornering stability. Dual compression with high and low speed adjustability offers a wide range of tuning options. Self-lubricating Kashima coating on the inner shock body improves wear resistance and shock action.

LAUNCH CONTROL

The KX Launch Control system is a major advantage in getting out of the starting gate straight and fast. Launch Control Mode has the greatest effect within the first few seconds of releasing the clutch off the start.

The KX250F features a Launch Control system that, with the simple press of a button, allows riders to activate a separate engine map designed to assist starting in certain conditions. The Launch Control Mode map retards ignition timing, allowing tires to gain grip in low-traction situations, and allows riders to focus on their lines. Launch Control remains active through first and second gear, until the rider shifts into third gear, and then it returns to normal engine timing.

Even for top-level riders, controlling the hard-hitting power of a KX250F motocrosser off the start requires a high degree of throttle control and clutch finesse. By optimizing this power, Launch Control Mode helps riders maximize traction, increasing the chance of getting a good start.

BRAKES

Contributing to the racing components found throughout the KX250F are the brakes. Up front is an oversized 270mm Braking® brand rotor, which delivers strong braking force and superb control. The petal style discs contribute to both sporty looks and help deflect debris. Rear caliper guard helps protect the caliper from damage.

KAWASAKI KX™250F

Color: Lime Green

MSRP: $7,749

Availability: Now

ABOUT KAWASAKI

Kawasaki Heavy Industries, Ltd. (KHI) started full-scale production of motorcycles over a half century ago. The first Kawasaki motorcycle engine was designed based on technical know-how garnered from the development and production of aircraft engines, and Kawasaki’s entry into the motorcycle industry was driven by the company’s constant effort to develop new technologies. Numerous new Kawasaki models introduced over the years have helped shape the market, and in the process have created enduring legends based on their unique engineering, power, design and riding pleasure. In the future, Kawasaki’s commitment to maintaining and furthering these strengths will surely give birth to new legends.

Kawasaki Motors Corp., U.S.A. (KMC) markets and distributes Kawasaki motorcycles, ATVs, side x sides, and Jet Ski® watercraft through a network of approximately 1,100 independent retailers, with close to an additional 7,700 retailers specializing in general purpose engines. KMC and its affiliates employ nearly 3,100 people in the United States, with approximately 260 of them located at KMC’s Foothill Ranch, California headquarters.

Kawasaki’s tagline, “Let the good times roll.®”, is recognized worldwide. The Kawasaki brand is synonymous with powerful, stylish and category-leading vehicles. Information about Kawasaki’s complete line of powersports products and Kawasaki affiliates can be found on the Internet at www.kawasaki.com.

Isle Of Man TT: Racer Alan Bonner Killed During Qualifying Wednesday

STATEMENT ISSUED ON BEHALF OF ACU EVENTS LTD

ACU Events Ltd regrets to announce that Alan Bonner, 33, from County Meath in the Republic of Ireland died this afternoon during a qualifying session at the Isle of Man TT Races.

Alan was involved in an incident at the 33rd Milestone during the qualifying session for the Senior TT.

Alan made his TT mountain course debut at the 2014 TT Races and had a highest placed finish of fifteenth, which he achieved in the 2015 Senior TT. He finished 28th in the Superbike race last Sunday 4th June, winning a bronze replica and also finished 30th in this morning’s Superstock race, winning another bronze replica.

He was the fastest ever TT rider from the Republic of Ireland with a lap of 127.090mph which he achieved in 2015.

ACU Events Ltd wishes to pass on its deepest sympathy to Alan’s partner Gemma and his family and friends.

MotoGP: Michelin Bringing “Correct Solutions” To Handle Demands Of Catalunya Circuit

MONTMELO OFFERS UP ANOTHER NEW CHALLENGE FOR MICHELIN

Michelin takes the short journey across the Franco-Spanish border this week and heads to the heart of Catalunya as round seven of the MotoGP™ World Championship makes base for the weekend at Montmelo near Barcelona for the Gran Premi Monster Energy de Catalunya.

One of the more modern tracks on the calendar, the Circuit de Barcelona-Catalunya first became a MotoGP venue in 1992 and has remained a popular and regular event since then. With elevation changes, a kilometre-long straight, fast turns, hard braking zones and an imposing grandstand on the start/finish straight that provides an incredible acoustic backdrop on race-day, Montmelo is a must for any true MotoGP fan. Through fast, flowing turns where the edge of the tyre will be pushed to the limit, the rear MICHELIN Power Slick tyres will certainly be given an intense examination and to cope with these circumstances they will feature an asymmetrical design over all three compounds, with the right-hand-side having the harder rubber to manage the demands that the high-speed, sweeping corners will generate. Grip levels at Montmelo can also be compromised as the temperature rises, this along with the bumpy nature of the track, makes it a very demanding circuit and the front MICHELIN Power Slicks in the three compounds – all asymmetric with a harder right-hand side – will have to work extremely hard to cope with the stresses placed upon them throughout the weekend. The MICHELIN Power Rain tyres will also be available within the allocation to cope with any changeable or wet conditions.

This season will see a change to its revised 4,652m layout at Montmelo, with modifications being made to the last chicane to give riders a safer run-off area. This changes the track to a nine right-hand and seven left-hand bend configuration – the previous layout had five lefts and eight rights – these alterations have been adopted following the accident that happened there in last season’s Moto2™ practice when Spaniard Luis Salom was killed in a high-speed crash. With safety always a priority within MotoGP the layout was altered for the remainder of that weekend last year and has now been further assessed, with additional changes implemented for this coming weekend.

Situated just north of Barcelona near the town of Granollers, the Montmelo track has a habit of producing superb racing which is enjoyed by excited and knowledgeable crowds. With many Spanish riders in the race, some of whom originate from Catalunya – as well as being the home of Dorna – this year will no doubt be as passionate as ever. The track action for Sunday’s 25-lap race will begin with two free practice sessions on Friday. This will be followed by a further two sessions on Saturday, before the qualifying practices take place in the afternoon to decide the grid positions for race-day, which will get underway at 14.00hrs local time (14.00hrs CEST, 13.00hrs BST, 12.00hrs GMT/UST) on Sunday 11th June.

Piero Taramasso – Michelin Motorsport Two-Wheel Manager:

“The recent test at Montmelo was very informative and we were able to try many different tyres to see what works well there. The track can be quite hard on tyres and as the heat rises the grip levels drop, so with the test we worked hard on the compounds to see what would stop that without compromising overall performance. We now have a good direction for the type of compound that will perform at the track and as always, we will bring the correct solutions to make sure all the riders, bikes and teams have an equal opportunity to be competitive. The layout this year is also different so we need to take that into consideration, which means that having a chance to visit there and try the new design before the race was extremely useful. The event itself is a very impressive one, the track and organisation are both great and the fans that come to support the many Spanish riders make for a fantastic atmosphere. It has produced some exciting races in the past and hopefully we can have a weekend where the racing takes the spotlight and we see a good show.”

Southern California BMW Dealers To Offer Test Rides On Angeles Crest Highway

Southern California BMW Motorcycle Dealers Turn Up The Heat To Offer Test Rides On Angeles Crest Highway And Auto Club Speedway, June 24-25

Woodcliff Lake, NJ – June 8, 2017…No more California dreaming. This June, Southern California BMW Motorcycle Dealers are offering riders real-world opportunities to experience the comfort, safety, and performance features of BMW motorcycles on the road and track.

On Saturday, June 24, BMW Motorrad will present the full line of current models (including the West Coast debut of the new C Evolution electric scooter) for riders to demo on the challenging curves of Angeles Crest Highway – from the Valley floor to the picturesque mountains. Participants will also get an up-close look at the all-new 2018 BMW G 310 R, which will be on display. The Demo Day will be held from 8:00 a.m. until 2:00 p.m. at Newcomb’s Ranch, a gathering place well known to motorcyclists from all over the world.

For registration and information, visit:

http://www.socalbmwmc.com/newcombs-ranch-signup/

On Sunday, June 25, Southern California Motorcycle Dealers and Fastrack Riders will present the 5th Annual RR Fest at Auto Club Speedway in Fontana, CA. Top coaches and riders, including BMW Motorrad Motorsports Advisor and test rider Nate Kern, will help riders exploit the full potential of their S 1000 RRs in a safe, traffic-free setting during the full track day.

Street demo rides from the BMW Motorrad Demo truck line-up will be available at no charge to all qualified attendees, with on-track demo rides on a 2017 BMW S 1000 RR available to participants of the track day portion of the event.

The event, which is open to all brands and types of motorcycles, will feature vendors and demonstrations, as well as a custom bike show. A well-known DJ from the Long Beach Area will be spinning tunes all day to keep the crowd revved up.

Registrants for the track day can save $50 off the regular price of $279 and receive a commemorative T-shirt if they sign up at a Southern California motorcycle dealer. There is no charge for non-track day participants.

For registration and information, visit: http://www.socalbmwmc.com/2017rrfest/

BMW Group In America

BMW of North America, LLC has been present in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began distributing vehicles in 2003. The BMW Group in the United States has grown to include marketing, sales, and financial service organizations for the BMW brand of motor vehicles, including motorcycles, the MINI brand, and Rolls-Royce Motor Cars; Designworks, a strategic design consultancy based in California; a technology office in Silicon Valley and various other operations throughout the country. BMW Manufacturing Co., LLC in South Carolina is part of BMW Group’s global manufacturing network and is the exclusive manufacturing plant for all X5 and X3 Sports Activity Vehicles and X6 and X4 Sports Activity Coupes. The BMW Group sales organization is represented in the U.S. through networks of 342 BMW passenger car and BMW Sports Activity Vehicle centers, 152 BMW motorcycle retailers, 127 MINI passenger car dealers, and 36 Rolls-Royce Motor Car dealers. BMW (US) Holding Corp., the BMW Group’s sales headquarters for North America, is located in Woodcliff Lake, New Jersey.

Information about BMW products is available to consumers via the Internet at:

www.bmwmotorradusa.com.

Medical Update: Successful Surgery For M4 medAge Suzuki’s Nick McFadden

Medical Update On Nick McFadden

M4 medAge Suzuki rider Nick McFadden’s right collarbone (broken in a crash at Road America last weekend), was surgically repaired at San Gabriel Medical Center in San Gabriel, California on Wednesday, June 7th by orthopedic surgeon Dr. Tom Bryan.

Dr. Bryan said, “I was able to easily access the fracture, contour the titanium plate and achieve a perfect repair.”

M4 medAge Suzuki team physician and medAge founder Dr. Laura Ellis added, “Dr. Tom Bryan came highly recommended and has many years experience getting injured riders back on the track. He understands the need for a strong repair and that’s what Nick got.”

Nick himself said, “I’m relieved to be fixed. Dr. Bryan has taken care of many of my fellow racers so I know he is one of the best. I look forward to getting back on the bike as soon as possible.”

About Team Hammer

The 2017 season marks Team Hammer’s 37th consecutive year of operating as a professional road racing team. Racebikes built and fielded by Team Hammer have won 66 AMA Pro and MotoAmerica National races, have finished on AMA Pro and MotoAmerica National podiums 166 times and have won five AMA Pro National Championships, as well as two FIM South American Championships. The team has also won 134 endurance races overall (including seven 24-hour races) and 13 Overall WERA National Endurance Championships with Suzuki motorcycles, and holds the U.S. record for mileage covered in a 24-hour race. The team also competed in the televised 1990s Formula USA National Championship, famously running “Methanol Monster” GSX-R1100 Superbikes fueled by methanol, and won four F-USA Championships.

MRA Racing At High Plains Raceway This Coming Weekend

Denver, CO – The MRA returns to High Plains Raceway this weekend, June 10-11, for Round 3 of it’s 2017 Championship Season. Join us for non-stop high octane excitement as the fastest riders in the region race head to head on everything from 250cc production motorcycles to 200 horsepower superbikes on HPR’s 2.5 mile Full Course!

Racing action starts at 10:00 am both days. Admission is only $12 for adults and is good for the whole weekend. Kids under 12, military personnel, law enforcement and emergency responders are free! Stop by any Colorado motorcycle dealership for a 2-for-1 admission pass and then bring a friend. Spectators are welcome to walk through the pits to see the riders and machines up close.

The SuperStreet program will run this weekend for those riders that want to take it to the track and work on their technique during a race weekend. Maximum SuperStreet riders per weekend will be limited to 26 and the spots are filling up fast! More information about this program and how to get started can all be found online on our website – http://www.mra-racing.org/superstreet/superstreet…

High Plains Raceway – http://highplainsraceway.com/

93301 E Highway 36, Deertrail, Colorado 80105

For a daily schedule of races go to: http://www.mra-racing.org/schedule/race-day-sched…

The Motorcycle Roadracing Association is dedicated to promoting safe and competitive motorcycle road racing events for enthusiasts in Colorado and the surrounding area. For more information, go to http://www.mra-racing.org/

Ryan Sutton Earns Pirelli Bounty With New Track Record At The Ridge Motorsports Park

Ryan Sutton Captures Pirelli’s Third Track Bounty of the 2017 Season at The Ridge Motorsports Park

ROME, Ga. (June 7, 2017) – Today, Pirelli Tires North America announced that Ryan “Chromie” Sutton captured the brands third track bounty of 2017 by setting a new absolute motorcycle track record at The Ridge Motorsports Park in Shelton, Washington. The accomplishment took place during the Washington Motorcycle Road Racing Association’s (WMRRA) third round of the season on Saturday, May 27th. Sutton, who was competing aboard a 2016 BMW 1000RR, set the record just one week after Adam Robarts claimed two track bounties for Pirelli at Mission Raceway Park.

“I’m very appreciative of the support I’ve received from DJ Griffin at Moto G Racing in 2017,” said Ryan Sutton. “The Pirelli DIABLO™ SUPERBIKE Slicks are amazing tires and I’m looking forward to continuing my progression each time out on the track and have my sights set on capturing more track records this year.”

Sutton’s No. 51 BMW motorcycle was equipped with Pirelli’s DIABLO SUPERBIKE Slicks, featuring a SC1 front and SC0 rear tire. He used a blistering pace to lay down a new best lap time of 1:38.709 on Lap 7 of the Formula Ultra race and eclipse the previous track record of 1:38.807 that was held by Robarts. He was leading the race until a mistake sent him off of the track on Lap 3, eventually rejoining the race and mounting an impressive charge to earn a hard-fought sixth place at the checkered flag.

“I have been fortunate enough to work with Chromie [Ryan Sutton] over the years, dating back to my time servicing the Northwest region,” said Oscar Solis, Pirelli Road Racing Manager. “It’s a pleasure to see that Ryan is still progressing and settings track records. The BMW is a new motorcycle for him this year and I expect him to continue getting stronger and more comfortable with time on the bike.”

To learn more about the complete line of Pirelli motorcycle tires, please visit click here.

MotoAmerica: The Final Round Of Press Releases From The Races At Road America

Home race for Genuine Broaster Chicken concludes in positive progress

Elkhart Lake, WI – Road America, The National Park of Speed was the setting for the fourth round of the MotoAmerica Superbike Championship. The only way to really understand the grand scale of the track is to be there. It’s a tired cliché, but it’s the truth when referencing this massive facility dedicated to those willing to push their machines and their own bodies to the limits. It is the longest track on the schedule and its perhaps the most idyllic; if open green spaces set in a lush rolling landscape surrounded by hiking trails through the trees is your kind of scene. However, when things are this good, there must always be a downside. For Road America, the downside can be the weather. At the track, it is completely possible to have all four seasons within the same day sprinkled with a persistent threat of tornadoes. Soooo… you take the good with the bad and twist the throttle to full stop and just enjoy the splendor of Wisconsin’s Cathedral of Racing. From a fan’s perspective, it is a complete experience.

The team rolled into Road America after a much need break. The crew was able to have the bikes back in their own shop and conduct some critical maintenance and upgrades. These upgrades added some desperately needed horsepower ahead of the largest track in the series. While it was great to have the bikes home and being worked on, there is still the element of testing these parts under race conditions. Until that can happen on a regular basis, the crew will continue to play the guessing game and hope that they can get a fast machine right off the truck.

However, in what is becoming the norm, the first session of the weekend is more about wrenching than riding. So far this season Jake and the 32Crew average roughly 10 laps in Free Practice One. This is an issue that is the result of a few compounding issues. The short version is that this is still a very new motorcycle with very few hours on it, almost no testing, parts continue to come in and parts continue to be fabricated. All that to say that the first practice session has become the “test” for new electronic settings and components for Jake. This weekend was no different. Jake only completed eight laps and wasn’t really able to develop a solid feeling ahead of Free Practice Two later that day. It’s extremely critical that riders maximize their time on the track during these first two sessions as they set the grid for Superpole, so the sense of urgency is real.

Free Practice Two was more like the team is used to seeing. During the break, the 32Crew led by crew chief Scott Jensen, worked to solve the problems that cropped up in the morning. Jake was turned loose to set some fast laps around this massive 4 mile circuit. Knowing that the bike would be down on horsepower, it was more important to establish consistent laps at a pace where Jake could push the new CBR 1000rr SP2 to its limits. And that is what he was able to do. With a more rhythmic pace of 5-7 laps out then in, 5-7 out then in, Jake was able to climb from the bottom of the timing sheets to grab a solid P8 in the closing moments of the session to snag a ticket to Superpole.

Saturday arrives with an ominous distant thunderclap. The ride to the track was a feat in and of itself with the rain falling so hard the locals were pulling over on the highways into the track. As was mentioned above though, if you don’t like the weather wait a minute and it’ll change. Sure enough the weather did change. By the time Free Practice Three was set to go off, the rain had stopped but was still lurking about. The track was wet/dry/damp/slick/meh. Not ideal for a final push before Superpole to see if things were sorted out in the overnight maintenance. The decision was made to go out for that session on wet tires as the conditions were mixed. It turned out that wasn’t the right call as Jake had completely shredded those rain tires three or four laps into the session. When Jake came back into the pits, the decision was made to just not risk any damage to Jake or bike when the track would be completely different for the race. Save it for Superpole.

Less than an hour later, it was time to make the magic happen. In the hurried atmosphere of Superpole, riders and teams only have a few laps to make their mark on the starting grid. When the track is as big as Road America, a 15 minute session yields no more than 7 laps so everything counts. With the weather “iffy” but holding at dry, Jake went out for a few laps on the Dunlop Pre-Qualifier to really shake down the settings. Coming into the pit for the tire change there was no time to make anything more than the tiniest of suspension changes before roaring back out. Jake got his flying in at the last possible moment and was able to secure P9 on the starting grid. Not where he wants to be, but given the circumstances of the weekend, it was the best the team could manage.

Race one was slated for later that day and as luck would have it the weather decided to fully cooperate. The sun came shining out from behind the clouds and the temps soared back into the 80’s. Taking his place on the gird, Jake was eager to get the race started. The horns go off indicating to all personnel to clear the track and once the umbrella’s are folded and the crews are safe behind the barriers, it’s visors down for one last lap before the symphony begins. The grid rounds the track and return to their starting positions. Engines revving and all eyes focus on the lights. Lights hold, hold, hold, then go out and the field lunges forward down the straight towards Turn One. Jake made a decent start but was never able to break from the mid-pack and had to fight for some space through the next series of corners. Jake was able to hang with the tail end of the chase group for much of the first half of the race, but by the midpoint, he would be riding alone in P9. It was evident from watching him on track that there was an issue with his set-up that couldn’t have been flushed out in the limited time the team had on track leading up to the race. Despite this, Jake was setting good solid lap times and was gaining confidence on the bike around this circuit. Jake would finish in that solitary ninth position but more importantly he had gained a clearer understanding of what the Genuine Broaster Chicken / Honda wanted and he was able to effectively communicate that to his crew.

Sunday’s are always big days. Even though there is racing on Saturday, Sunday’s still feel bigger! Hard to explain, but there’s just that sense of “This is the day we’ve all been waiting for!” The teams were given an extended warm-up to try a new compound of tires for Dunlop and those extra 15 minutes were precious to the 32Crew and to Jake. The changes based on Race One data seemed to be in the right direction. Jake was confident that he could make a jump in the standings for Race Two. Following an amazing turnout for the Dunlop Fanwalk, it was time to suit up and head out for Race Two. Same protocol as always; crews on the grid ushered out by air horns and track officials, umbrella girls running in heels to get over the barriers and riders oblivious to it all as they center themselves on the task at hand. Once Jake made the warm-up lap and took his position on the starting line everything faded away. Again, the lights are on and then they aren’t. Signaling the start of race two.

Everything was going great until the bottom of Turn 5 where Jake Lewis had a massive high-side. His bike stayed on track and was hit by Bobby Fong who was then thrown to the track and run over by Mathew Schotlz. It was brutal to watch and when the red flags came out all anyone could do was wait to see if everyone was ok. Luckily there were no injuries and only Bobby was unable to make the restart. Race Two was re-staged and all the riders had to find that adrenaline again for a full race restart. This time Jake would make a better start and remain in the main pack for the first couple of laps. Jake’s pace was holding steady until an uncharacteristic mistake entering Turn One caused him a few positions. He snagged the double draft and got into T1 a few miles an hour faster than he had previously and missed his braking markers. Jake would have it all to do over again as he lost about four places. However, a flash of the real Jake he recovered and was soon climbing back up through the field. His pace was actually on par with those fighting for podiums. He had clawed his way to P6 and given his pace, P5 wasn’t too far from reality. Just as soon as he was clear of the group and had open track ahead of him to hunt down P5, Josh Herrin’s Yamaha exploded going down the front straight with three laps to go. The race was red flagged which took all riders back to the previous lap and that put Jake back down the order to P8.

That was a tough one, but that happens in racing. For all his and his crew’s hard work, the reward was the show of speed and pace at the end of Race Two. When you’re developing new machinery you have to take the positives and drive forward. In this case, it was clear that their changes had given Jake a bike he was more competitive on and that is massively encouraging going into Utah in two weeks’ time. From here the team will go home to Colorado. Hopefully there will be boxes of more go fast parts and time to install them.

Jake Gagne – Superbike

“I was pretty excited to be coming back to Road America. The team and I have always run pretty well here. I scored a few double race wins here and I really like this track so I was pretty pumped to see how this Honda would go around this big track.

This weekend was pretty crazy. We lost almost the entire first session so we had to come from behind but we made it to Superpole with a good second practice. I went alright in Superpole but didn’t quite get the flying lap I was looking for. Losing the track time hurt when getting the bike properly set-up. So I qualified 9th which wasn’t great, but I felt good that I could make up some ground.

Race one didn’t really go as well as we had hoped. I made a pretty good start but quickly realized I wasn’t going to be able to make a run with the leaders. I began to lose contact with those guys and did all I could to bring the bike home.

Race two was a different story. The first start was pretty decent but when we had to restart, I didn’t make the greatest launch. But I could tell that the improvements Scotty, DA and Evan made were going to work. I was running well but got into T1 a little hot and lost some ground. This was the first time though that I felt like I had the bike to make the pace I wanted. I was making passes and gaining positions and worked up to sixth. I was getting clear track when the second red flag came out. I was bummed because I knew that I could get closer and I was feeling great.

So in the end, the results aren’t great but we really feel that the improvements we found this weekend are going to carry this Genuine Broaster Chicken / Honda further and further. I think we turned a corner in the development and I’m looking forward to Utah.

Danny Walker – Team Principal

“This was a great weekend for us when you look at it from the complete perspective. First off, it was our title sponsor’s home race and they really came out in an awesome show of support for our efforts. Genuine Broaster Chicken has been taking on more of an active role not just in the team but the series and we were thrilled to have roughly 30 of their corporate employees join us here this past weekend.

With respect to the racing, this place holds a special place in our history and in Jake’s personal records. He runs strong here and we’ve typically kicked serious tail as a team at this track. This weekend, we knew we had a pretty big row to hoe. We understood that but we were happy with the work the crew had done while at home during the break. We were playing catch-up again most of the weekend and that was a bit frustrating, but in reality, we weren’t too far off. Again, it’s little things that make a big difference and what we saw in Race Two was the most encouraging aspect of the weekend with respect to Jake’s pace after running wide.

We saw that Jake was able to put his head down and hammer out some really fast laps. His times would’ve had him running within the top five! That’s awesome and shows we’re making great progress with this new Honda.

Now we go home, hope to see some boxes from Japan and get ready for Utah. Which if you know your RoadRace Factory history, is not our favorite track. Let’s hope we can start a new chapter there and come out closer to the top guys.”

Scott Jensen – Crew Chief

“Road America is always one of our favorite stops on the MotoAmerica schedule. From the great fans to the always challenging weather, the event is always memorable. We as a team have had some great success over the years at this track and always enjoy coming to this event.

The weekend started off with us trying out some new clutches on the bike which ended up taking most of the first couple practice sessions to get adjusted to the way we wanted. Practice three, we came out on rains (tires) as it was looking like the rest of the day would be wet. We opted for that set-up and it wasn’t the right way to go. Superpole was on a dry racetrack and with us struggling with a few settings on the bike we unfortunately were only able to manage a 4th row starting position.

Race one and race two look like very similar results but were in reality dramatically different for us a team. Race one saw us with some set-up issues and Jake doing a fantastic job riding as always. Race two, on the other hand, saw us with a dramatically more competitive bike and Jake being able to run very competitive times. However we were not able to show this in the results due to a small mishap (running wide in turn one) and a couple of red flags that saw the race shortened which hampered Jake’s ability to run closer up to the front.

Leaving Road America we are very positive and optimistic about the advancements we are making with the 2017 CBR1000rr SP2 and we are very eager to start showing how competitive this bike really is!” 

More, from a press release issued by TSE Racing:

TSE Racing competed in the MotoAmerica races this past weekend at Road America, which happens to be their home track. TSE Racings regular riders, Stefan Dolipski, Carl Soltisz and Peter Bernacchi joined forces with Brandon Paasch this past weekend.

Brandon Paasch: “This past weekend was a huge learning experience. My first weekend on a Yamaha R6 and my first weekend riding for TSE racing. Every session got better and better, the more I learned how to ride the bike and learned how to work with the team the times started to drop. The first race was a tricky one, starting wet on rain tires and ending dry, still on Rains. I wound up finishing 10th and learning a ton in my first race on the R6. Race two we had perfect weather, and battled the whole race for 4th with Benny Solis, but wound up finishing 5th. Overall, it was an amazing weekend of learning the team, bike and track! I cant thank everyone that got me there and helped me while I was there enough, without you guys (TSE Racing) I probably wouldn’t have been able to race. Hopefully I see everyone at Miller!!”

“We were approached the weekend prior to Road America about Brandon needing a ride for this last weekend.” Meghan Ryan Team Manager stated. “We had the R6 that Cory West rode in the Daytona 200 earlier this year ready to go and decided that we could make this event happen for Brandon. We knew the bike would be down a little on power as the rules packages for the 2 different organizations where different and the bike wasn’t up to a full Supersport spec. Brandon rode his heart out and did an amazing job this past weekend. He fit in great with the whole team and we hope to work with him some more yet this year. The team as a whole did a great job this weekend. Carl and Peter, competing in Superstock 600 both started their weekends with electrical problems, that we sorted out before race time. They both missed some valuable track time the first day but managed to keep their heads up and push through. Stefan also struggled with some setup issue at the start of the weekend that we were able to sort out with the help of BMW.”

Stefan Dolipski: “Im excited to have been back racing with motoamerica this past weekend at road America, one of the greatest tracks in the US. As Always the TSE crew performed and helped me in any way possible. I’m happy with two 10th place finishes and look forward to race again.

Thank you to the TSE team as well as BMW Motorrad for technical support”

In german :

“Ich bin sehr glücklich wieder in der amerikanischen motoamerica klasse gefahren zu sein. Wie immer hat das TSE Team großartige Leistung und Unterstützung gebracht. Ich freue mich schon auf das nächste Renn Wochenende. Vielem Dank dem TSE Team und auch BMW Motorrad für die technische Unterstützung.”

Carl Soltisz: “I suffered a little starting far back on the grid thanks to a crash in the rain soaked qualifying session and a technical infraction in race 1, but was still able to achieve some good results in the races where it mattered most. Despite some tricky drying track conditions in race 1 I had great confidence in the bike and pushed my way up to finish 8th in class. We went the wrong way with a gearing change in race 2, but I’m happy with how I rode considering, setting my fastest lap of the weekend and scoring some solid points 9th place in class. I want to thank the entire TSE team and all my sponsors for giving me an awesome package to work with this weekend and I would also like to thank all the fans that came out to support us.”

Peter Bernacchi: “It was great to make my first MotoAmerica race at Road America, which is always a blast to ride. I had some mechanical issues with my bike, but the expertise of the TSE Racing team solved them quickly and kept me in the mix. The level of competition is higher than what I’m used to at a club race, but I’m glad to have finished both races and clicked off a personal best lap at RA. Looking forward to some more tweaks and better pace for my next races this summer!”

British Superbike: Honda’s Jason O’Halloran Fastest During Official Testing At Snetterton

Honda Racing back on top: O’Halloran tops Snetterton official test

Honda Racing and Jason O’Halloran were back on top of the MCE Insurance British Superbike Championship at today’s (Wednesday) official test at Snetterton as the Australian set the pace ahead of next weekend’s fourth round at Knockhill.

In the afternoon session O’Halloran upped his pace despite the blustery conditions at the circuit where he claimed his first MCE BSB race win last year, to better his 2016 qualifying lap time at the Norfolk circuit on the new Honda Fireblade.

O’Halloran’s pace-setting lap was just 0.095s faster than the closing Be Wiser Ducati of Glenn Irwin as he returned to action in Norfolk with the local contenders RAF Reserves Kawasaki locking out third place with Jake Dixon.

Defending champion Shane ‘Shakey’ Byrne was fourth fastest on the second of the Be Wiser Ducatis with Czech contender Jakub Smrz having a strong afternoon session in fifth place. The fastest rider from the morning sessions, American John Hopkins ended the day sixth fastest for the Moto Rapido Ducati team.

It was a tough day for the championship leading JG Speedfit Kawasaki squad; standings leader Leon Haslam was forced out of action by a technical problem, leaving Luke Mossey to fly the flag at his home circuit, setting the seventh fastest time.

Dan Linfoot on the second of the Honda Racing machines was eighth fastest with Billy McConnell and James Westmoreland completing the top ten on combined times.

MCE Insurance British Superbike Championship, Snetterton, Official Test, combined:

1. Jason O’Halloran (Honda Racing) 1m:48.297s

2. Glenn Irwin (Be Wiser Ducati) +0.095s

3. Jake Dixon (RAF Reserves Kawasaki) +0.316s

4. Shane Byrne (Be Wiser Ducati) +0.352s

5. Jakub Smrz (Lloyd and Jones PR Kawasaki) +0.365s

6. John Hopkins (Moto Rapido Ducati) +1.217s

7. Luke Mossey (JG Speedfit Kawasaki) +1.517s

8. Dan Linfoot (Honda Racing) +1.744s

9. Billy McConnell (Quattro Plant FS-3 Kawasaki) +1.799s

10. James Westmoreland (Gearlink Kawasaki) +1.848s

For more information visit www.britishsuperbike.com


Jason O’Halloran

Honda Racing

Fastest rider at Snetterton official test

“It has been a really positive day for us here at Snetterton. We have continued with our work from Oulton Park where we had our first podium of the year and I felt much more comfortable and confident there.

“I felt good straight away and the team have done a fantastic job. It allowed us to work on the chassis today with a new component and that felt really good. We have also been working on the harder tyre and then made a good step too with the softer tyre too, so that will help us later in the year.

“It felt good to see P1 back on the pit board at this test and I feel that we are ready for Knockhill next weekend where we want to be fighting for more podiums!”

Kawasaki’s Z125 Pro Returning For 2018

KAWASAKI Z125 PRO

KAWASAKI’S MOST NIMBLE BIKE RETURNS

Returning for 2018 model year is the highly acclaimed bike designed to conquer the city, the 2018 Kawasaki Z125 PRO motorcycle. Regardless of your riding experience or how much gas money you have in your pocket, the Z125 PRO is designed to amplify the thrill of riding. For 2018, the Z125 PRO is available in a new color, Metallic Courage Gray and a new special edition available in Candy Plasma Blue/Metallic Spark Black. Returning for 2018 is the Kawasaki Racing Team (KRT) Edition in Lime Green/Ebony.

  • Large 2-gallon tank
  • Low seat height (31.7 inches)
  • Performance suspension suitable for comfortable and sporty riding
  • Capable of two-up riding
  • Compact size and light weight (224.8 lbs wet) makes for easy maneuverability

The Z125 PRO is a visually striking motorcycle with styling that’s a little on the dark side. It not only has edgy looks, but it’s also a blast to ride. It fits into that perfect package for those desiring a small motorcycle with plenty of capabilities, low price and great gas mileage. Thanks to the performance-oriented suspension, easy maneuverability and high fun level, it’s also a motorcycle you won’t soon outgrow. The Z125 PRO was built for the pureness of the riding experience.

With a user-friendly seat height of 31.7 inches and a low weight of 224.8 pounds, the Z125 PRO is one of the lightest and nimblest road bikes you’ll ever own. Its lightweight and low seat height also makes it easy for almost any rider to maneuver. The chassis of the Z125 PRO is designed to accommodate two-up riding and with the large two-gallon fuel tank, it’ll keep you on the road longer between fuel stops.

The multi-reflector headlamp throws a clear beam of light, facilitating illumination. Compact engine shrouds contribute to the bike’s hourglass figure as well as its overall aggressive design. The side shrouds also offer a degree of wind and road protection.

The ignition switch is located, à la Z, at the front of the tank, adding to the bike’s sporty image and tidy cockpit design. 

ENGINE

The Z125 PRO’s single-cylinder, 4-stroke SOHC engine displaces 125cc thanks to its oversquare 56.0 x 50.6mm bore and stroke. The 125cc engine is tuned for street riding with an exciting and sporty, yet easy to ride power delivery. Unlike most small-displacement enginesthe engine of the Z125 PRO features digital fuel injection with a 24mm throttle body, for smooth operation and quick starts.

The 2.6-liter air box is positioned above and forward of the cylinder head, contributing to the sporty power feeling and helping to minimize intake noise. Cam profiles and intake port design also contribute to the smooth, quick-revving engine character, as well as stable idling.

The Z125 PRO motorcycle has easy, consistent starts thanks to its electric start, digital fuel injection and the Kawasaki Automatic Compression Release (KACR),which utilizes the exhaust valve to release cylinder pressure during starting.

The Z125 PRO uses a four-speed transmission with a manual clutch and clutch lever. It has a very easy, light clutch-lever feel and positive engagement. Shifting comes through a link-type shifter lever very similar to that of a full size sportbike, so that the Z125 PRO’s shift lever requires little load pressure to engage, another major plus for riders.

CHASSIS & SUSPENSION

The compact chassis, along with sporty suspension and tires, enable riders to enjoy the light, nimble handling one would expect from a Kawasaki Z motorcycle.

Up front are the aggressive 30mm inverted front forks, which show you it means business. The forks feature nearly 4 inches of travel and excellent rigidity while keeping unsprung weight low for sporty riding. Up top is a lightweight aluminum upper triple clamp.

The single shock rear suspension is offset for a compact package and sporty handling. The shock’s mounting angle is optimized for the Z125 PRO for superb shock action and great ride comfort. The rear shock has 4-way preload adjustability, which allows riders to set the spring preload for their weight or to accommodate a passenger. Contributing to the sporty characteristics and looks are the 12-inch cast aluminum wheels, which cut down on unsprung weight and are wrapped in 100/90 and 120/70 tires front and rear. The tire sizes and tread patternwere chosen to optimize the Z125 PRO’s light and nimble riding characteristics.

The Z125 PRO is built on a high-tensile, steel backbone frame with sufficient tube diameter to enable two-up riding. The frame backbone measures 48.6mm in diameter and is supported by 25.4mm lateral tubes. The rear frame tubes are 22.2mm in diameter. The Z125 PRO also features a highly rigid box-section swingarm.

BRAKES

The Z125 PRO features hydraulic disc brakes front and rear with Nissin calipers. Up front is a 200mm petal-style disc and a 184mm petal-style disc on the rear wheel.

Color:

NEW The 2018 Z125 PRO will be available in three colors:

  • Metallic Courage Gray
  • “Special Edition” Candy Plasma Blue/Metallic Spark Black
  • KRT Edition Lime Green/Ebony

KAWASAKI Z125 PRO

Color: Metallic Courage Gray

MSRP: $3,199

Availability: Now

KAWASAKI Z125 PRO SE

Color: Candy Plasma Blue/Metallic Spark Black

MSRP: $3,399

Availability: Now

KAWASAKI Z125 PRO KRT Edition

Color: Lime Green/Ebony

MSRP: $3,399

Availability: Now

ABOUT KAWASAKI

Kawasaki Heavy Industries, Ltd. (KHI) started full-scale production of motorcycles over a half century ago. The first Kawasaki motorcycle engine was designed based on technical know-how garnered from the development and production of aircraft engines, and Kawasaki’s entry into the motorcycle industry was driven by the company’s constant effort to develop new technologies. Numerous new Kawasaki models introduced over the years have helped shape the market, and in the process have created enduring legends based on their unique engineering, power, design and riding pleasure. In the future, Kawasaki’s commitment to maintaining and furthering these strengths will surely give birth to new legends.

Kawasaki Motors Corp., U.S.A. (KMC) markets and distributes Kawasaki motorcycles, ATVs, side x sides, and Jet Ski® watercraft through a network of approximately 1,100 independent retailers, with close to an additional 7,700 retailers specializing in general purpose engines. KMC and its affiliates employ nearly 3,100 people in the United States, with approximately 260 of them located at KMC’s Foothill Ranch, California headquarters.

Kawasaki’s tagline, “Let the good times roll®”, is recognized worldwide. The Kawasaki brand is synonymous with powerful, stylish and category-leading vehicles. Information about Kawasaki’s complete line of powersports products and Kawasaki affiliates can be found on the Internet at www.kawasaki.com.

Kawasaki Releases Updated 2018-Model KX250F

THE NEW KX™250F RETURNS WITH EVEN QUICKER LAP TIMES

The dominating Kawasaki KX™250F motorcycle returns for 2018 with a list of enhancements to keep the KX250Fon top as the single-most dominant motocross bike of the last decade. The 2018 model offers an updated engine for an improved torque feeling throughout the rpm range, as well as improved holeshot performance. The KX250F still features a lightweight, slim and rigid chassis, but now features revised suspension to deliver improved bump absorption and suspension action. These improvements all mean one thing: faster lap times—the 2018 Kawasaki KX250F was found to have significantly faster lap times on the Kawasaki test track compared to the 2017 model.

The 2018 Kawasaki KX250F:

Improved power and torque throughout the rev range

Improved suspension settings for better compliance, resulting in quicker lap times

This year’s KX250F is built with race-winning components to help Kawasaki riders get to the top step of the podium. From the showroom to the racetrack, the performance of Kawasaki’s KX™ family of motorcycles is proof of its engineering pedigree. It truly is the Bike that Builds Champions.

ENGINE

New throttle body and fuel injector angle, for increased torque feeling throughout rpm range

New fuel pump with increased output pressure

New intake boot

New intake camshaft

New cylinder head with revised intake tract and compression ratio (13.4:1)

New exhaust header with longer and larger piping

Highly acclaimed for its high output and smooth power delivery, the KX250F motorcycle is back with new tuning and improved performance. Tuned to best suit race-experienced riders, the 249cc liquid-cooled, 4-stroke single’s wide power-band focuses on high-rpm performance that extends way into the over-rev. Riders will feel more power from low to high rpm, and experience improved over-rev characteristics.

Entering its second year after a major redesign, Kawasaki engineers concentrated on fine-tuning the 2018 KX250F’s performance in multiple ways. The intake path has been revised with a shorter intake funnel and redesigned duct. Intake valve timing has also been advanced. The KX250F features a new fuel pump with increased output as well as a new injector placement angle, bringing more precision and improved performance. The Fuel Injection system and ECU also now have revised settings, providing performance the rider can feel at the flick of the throttle. The exhaust header is now larger and longer, further increasing torque and power output, while retaining the resonator chamber.

These changes have improved the power feeling from ultra-low to high rpm—the engine feels stronger at all rpm. The 2018 KX250F motorcycle also features improved over-rev characteristics, resulting in less rpm drop when shifting, keeping the bike in the sweet spot of power while trying to cut the fastest lap possible. While power and torque have improved, the KX250F is also now easier to use in high-rpm operation.

The dual-injector fuel injection system of the KX250F is a key component to its performance; the 2012 KX250F was the world’s first production motocross bike to use such a system. Unlike a standard fuel injection system, which uses one injector downstream of the throttle valve, the system on the KX250F motorcycle uses a second, upstream injector located close to the airbox. The downstream injector is used to help ensure smooth, instant response featuring a finer atomization with more holes in the injector itself. The downstream injector creates that stronger low-to-mid range power and quick throttle response, while the upstream injector is charged with providing top-end power.

As rpm and throttle position increase, primary operation switches from the downstream injector to the upstream injector, depending on whether in a low (1st, 2nd) or high (3rd, 4th, 5th) gear, the transition is gradual and seamless. The upstream injector’s greater distance from the combustion chamber gives the fuel particles and intake air more time to mix, as well as allowing the mixture to cool before entering the combustion chamber, both of which contribute to more efficient filling, and ultimately more power.

TUNING

Lightweight ECU, with revised settings

DFI® Connectors activate three separate engine tuning maps (standard, hard, soft)

Optional KX FI Calibration Kit (Handheld) requires no tools, laptop or battery

The lightweight ECU of the KX250F motorcycle was designed specifically to withstand the rigors of motocross racing, while still providing a wide variety of tuning options. The Kawasaki KX250F provides three engine maps that come pre-loaded into the motorcycle’s ECU that are easily accessible through the DFI® coupling plug. These three color-coded couplers are designed to tune for hard, medium or soft track surfaces, and allow riders to find the ideal power delivery for a particular terrain.

Using the optional KX FI Calibration Kit (handheld), sold separately as a Kawasaki Genuine Accessory, a rider can store and select from up to seven separate engine maps. The kit includes a portable handheld calibration tool, which enables riders to make changes to the engine maps without the need of a PC, laptop or battery, making it easy to tune at the track. The handheld calibration module plugs in thanks to an additional harness not included in the kit.

FRAME & SUSPENSION

Lightweight, aluminum perimeter frame design

Showa 48mm Separate Function Front Fork (SFF Type 2)

Unchanged since the introduction of a new frame in 2017, the slim chassis design contributes to light, nimble handling. The flat seat makes it easy for riders to shift their weight, offering a high level of riding freedom. New for 2018 are fine-tuned front and rear suspension settings that deliver improved bump absorption, which result in improved handling. Kawasaki test riders found improved times in tight and open sections of the Kawasaki test track.

Up front you’ll find revised Showa 48mm Separate Function Front Forks (SFF Type 2) with works-style internal construction that locates its damping assembly in the left fork tube and a spring in the right. The Separate Function Front Fork construction contributes to a planted feel at the front, superb damping performance and ride comfort with greater bottoming resistance. It also has excellent agility when on the brakes or when landing jumps. For 2018, revised settings contribute to greater precision over braking bumps and through corners.

The Uni-Trak® rear suspension with Showa shock features revised settings, new for 2018. These changes contribute to improved ride feel, traction, and increased rear-end feedback. The rear shock linkage mounts are below the swingarm to maximize wheel travel and cornering stability. Dual compression with high and low speed adjustability offers a wide range of tuning options. Self-lubricating Kashima coating on the inner shock body improves wear resistance and shock action.

LAUNCH CONTROL

The KX Launch Control system is a major advantage in getting out of the starting gate straight and fast. Launch Control Mode has the greatest effect within the first few seconds of releasing the clutch off the start.

The KX250F features a Launch Control system that, with the simple press of a button, allows riders to activate a separate engine map designed to assist starting in certain conditions. The Launch Control Mode map retards ignition timing, allowing tires to gain grip in low-traction situations, and allows riders to focus on their lines. Launch Control remains active through first and second gear, until the rider shifts into third gear, and then it returns to normal engine timing.

Even for top-level riders, controlling the hard-hitting power of a KX250F motocrosser off the start requires a high degree of throttle control and clutch finesse. By optimizing this power, Launch Control Mode helps riders maximize traction, increasing the chance of getting a good start.

BRAKES

Contributing to the racing components found throughout the KX250F are the brakes. Up front is an oversized 270mm Braking® brand rotor, which delivers strong braking force and superb control. The petal style discs contribute to both sporty looks and help deflect debris. Rear caliper guard helps protect the caliper from damage.

KAWASAKI KX™250F

Color: Lime Green

MSRP: $7,749

Availability: Now

ABOUT KAWASAKI

Kawasaki Heavy Industries, Ltd. (KHI) started full-scale production of motorcycles over a half century ago. The first Kawasaki motorcycle engine was designed based on technical know-how garnered from the development and production of aircraft engines, and Kawasaki’s entry into the motorcycle industry was driven by the company’s constant effort to develop new technologies. Numerous new Kawasaki models introduced over the years have helped shape the market, and in the process have created enduring legends based on their unique engineering, power, design and riding pleasure. In the future, Kawasaki’s commitment to maintaining and furthering these strengths will surely give birth to new legends.

Kawasaki Motors Corp., U.S.A. (KMC) markets and distributes Kawasaki motorcycles, ATVs, side x sides, and Jet Ski® watercraft through a network of approximately 1,100 independent retailers, with close to an additional 7,700 retailers specializing in general purpose engines. KMC and its affiliates employ nearly 3,100 people in the United States, with approximately 260 of them located at KMC’s Foothill Ranch, California headquarters.

Kawasaki’s tagline, “Let the good times roll.®”, is recognized worldwide. The Kawasaki brand is synonymous with powerful, stylish and category-leading vehicles. Information about Kawasaki’s complete line of powersports products and Kawasaki affiliates can be found on the Internet at www.kawasaki.com.

Isle Of Man TT: Racer Alan Bonner Killed During Qualifying Wednesday

STATEMENT ISSUED ON BEHALF OF ACU EVENTS LTD

ACU Events Ltd regrets to announce that Alan Bonner, 33, from County Meath in the Republic of Ireland died this afternoon during a qualifying session at the Isle of Man TT Races.

Alan was involved in an incident at the 33rd Milestone during the qualifying session for the Senior TT.

Alan made his TT mountain course debut at the 2014 TT Races and had a highest placed finish of fifteenth, which he achieved in the 2015 Senior TT. He finished 28th in the Superbike race last Sunday 4th June, winning a bronze replica and also finished 30th in this morning’s Superstock race, winning another bronze replica.

He was the fastest ever TT rider from the Republic of Ireland with a lap of 127.090mph which he achieved in 2015.

ACU Events Ltd wishes to pass on its deepest sympathy to Alan’s partner Gemma and his family and friends.