Home Blog Page 1373

MotoGP: Rossi Says He Feels Strong And Excited To Start Season

Season opener beckons for PETRONAS Yamaha Sepang Racing Team

Franco Morbidelli and Valentino Rossi ready for first race of 2021 in Qatar

This weekend will see the commencement of the 2021 MotoGP championship for PETRONAS Yamaha Sepang Racing Team’s Franco Morbidelli and Valentino Rossi with the Grand Prix of Qatar. It will be the first MotoGP race since 2019 at Losail International Circuit, after the 2020 edition was cancelled for the premier class.

The event will signal the start of Morbidelli’s third season with the Malaysian squad, a pairing that saw him become vice-champion last year. The Italian enjoyed a successful pre-season test at the Qatar track and will be hoping to use that momentum to start the season with a great result at the first round. Although Franco has not finished inside the top-ten in his two premier class Qatar races, he does have good form at the circuit after winning his Moto2 race there in 2017.

This Sunday will see the 9-times World Champion Valentino Rossi continue his new challenge as he enters his first race as a PETRONAS Yamaha SRT rider, and his first with fellow Italian Morbidelli as his team-mate. Valentino has good form at Losail having previously visited the MotoGP podium eight times previously, including victories in 2010 and 2015. Combining this past experience with the positive pre-season test, Rossi will be hoping for a good start to his 2021 campaign.

The Grand Prix of Qatar will begin for Morbidelli and Rossi at 3.40pm local time (8.40pm MYT) with Free Practice 1 on Friday, before the first MotoGP race (22 laps) of the 2021 season gets underway at 8pm local time (1am MYT).

Franco Morbidelli

I think we are ready for the first race of the season. We worked hard in testing, tried several things and then focused on setting up the bike for the Qatar track. The set-up is never perfect, you can always find things to change and improve, but I think we have a really good base. To have a good race there you need to be fast, have a good pace, to be consistent and understand which is the right tyre. It’s hard to know from testing what the target should be, but we want to aim to be in the top-five and to fight for the podium – we think it’s possible. We’ll see where we are though on Sunday.

Valentino Rossi

After testing in Qatar, I feel quite strong and the balance of the bike is good. I achieved my best-ever lap of the circuit, which was an important and positive thing to do. I think there are a lot of riders on different bikes that are also strong, but we’re definitely in the pack with them. Our race pace looks to be good, so I feel like we are ready to start the season in Qatar this weekend. There is a really good atmosphere in the team; we’ve worked well and in the right direction. I’m excited to start the season properly in a few days’ time.

MotoAmerica: Uribe Riding FLY Racing/ADR Motorsports Superbike

Jayson Uribe, age 21, has signed with FLY Racing/ADR Motorsports to race a Suzuki GSX-R1000 in the 2021 MotoAmerica Superbike Championship.

“David [Anthony, FLY Racing/ADR Motorsports rider/owner] reached out to me and asked what my plan was for 2021,” Uribe told Roadracingworld.com. “I told him we had some things in the water but didn’t have anything signed yet. From there, we started talking back and forth about somethings we wanted to do and what we had in mind.

“We had an opportunity to test Dave’s bike in late January, and later that week we signed a contract for 2021. It’s been good so far. I love the team, and I love David. He’s a really great guy. I’m just trying my best to get used to the bike.”

After several seasons racing successfully in the British MotoStar (Moto3) National Championship, the French 600cc Superstock National Championship, and the FIM CEV Repsol Moto2 European Championship, Uribe returned to America and focused on club racing locally with AFM, where he won the club’s #1 plate in 2019.

Uribe also made appearances in selected MotoAmerica events in the Superstock 600, Supersport, and Superbike classes, including a podium finish in Supersport at Utah Motorsports Campus in 2017.

During this time, Uribe has also been doing a formal apprenticeship to be an electrician and more recently has become a volunteer firefighter for the Napa County Fire Department.

“Yes, I’m in my last year of my apprenticeship to be an electrician and I’m still a volunteer firefighter,” said Uribe. “The firefighting thing is something I’ve always been interested in since I was a kid, but I never pursued it until 2017 when we had a pretty big fire that was right by my house. That was the turning point for me. I felt I needed to get off my butt and make this happen. I went to the academy, graduated, and here we are.”

In fact, Uribe spent approximately 30 days on the fire lines fighting wildfires in California in 2020 and was still able to race with AFM and in selected MotoAmerica events. But for 2021, Uribe said racing is his priority.

On March 21, Uribe used his new Suzuki Superbike to beat his team owner/teammate Anthony and win the AFM Formula Pacific race at Buttonwillow Raceway Park.

Uribe said the next time he will be in action will be March 30-31 at the official MotoAmerica/Dunlop test at Circuit of The Americas.

N2/WERA National Endurance Series Announces Purse, New Class

N2/WERA National Endurance Series by Dunlop Announces 2021 Purse Structure, Classes, Rules, and Sponsors.

Media, PA (March 2021) – N2 Track Days, the premier track day organization in America, in association with WERA Motorcycle Road Racing, is proud to announce new rules and classes for the 2021 N2/WERA National Endurance Series by Dunlop. In addition to new technical rules, N2 is proud to announce some incredible new partnerships that will provide a lucrative contingency, bonus, and purse pay out for all participating teams and riders. One class champion will even receive a new 2022 motorcycle from Yamaha Motor USA! The series will be officiated by WERA Motorcycle Road Racing and will be held in conjunction with WERA Sportsman Series events.

The 2021 N2/WERA Endurance Series by Dunlop will consist of five rounds from April through September. Each event will consist of a N2 track day on Friday, N2 Endurance on Saturday, and WERA sprint racing on Sunday. N2 Endurance on Saturday will have two endurance races. The first will be a 2-hour Endurance race for ultralightweight machines such as Yamaha YZF-R3, Kawasaki Ninja 400, KTM RC 390 and others. The main event will be a 4-hour Endurance race for the traditional heavyweight, middleweight, and lightweight machines. New for 2021 will be the Road Race Relay class that will race during the 4-hour main event.

The new Road Race Relay class is designed to be an entry-level class for racers who would like to try endurance, but do not have dedicated endurance equipment like high-capacity tanks, fuel dump cans, and quick-change wheel equipment. Teams will consist of a minimum of two riders on two separate motorcycles with a single electronic transponder. Instead of traditional pit stops where the team changes tires and fuel on a single motorcycle, the Road Race Relay pit stop will consist of a transponder swap to a new rider with a new motorcycle. The goal is to use the resource of each team to travel as much distance as possible with the transponder for the fixed duration of the race. Contingency, bonuses, and purse will be available for successful teams.

“We are very excited about the Road Race Relay class,” said N2 Track Days CEO Rob Cichielo. “The introduction of this class allows new racers to try their hand at endurance racing without committing to the expense of quick-change gadgetry and alleviates any pressure of sharing a team bike. Though interest in this event is very high, we will be limiting this class to ten entries per event.”

Racing is expensive. The N2 National Endurance Series has partnered with some amazing sponsors to provide a substantial purse, contingency program, and bonus structure. Companies like Dunlop Motorcycle Tires, N2 Track Days, and Yamaha Motor USA have contributed substantial resources to provide a cash purse of over $115,000 for the five-round series. The result is one of the best purse structures for club racing in decades.

Tentative per race purse payouts (subject to increase with additional sponsorship) are as follows:

Heavyweight, Middleweight, Lightweight 4-hour Endurance Per Class Purse:

1st – $2500

2nd – $1500

3rd  – $750

4th  – $500

5th  – $250

6th  – $150

7th  – $100

 

Ultralightweight Endurance 2-Hour Class Purse:

1st – $1500

2nd – $750

3rd  – $500

4th  – $250

5th  – $150

6th  – $100

7th  – $50

 

Road Race Relay Class Purse:

1st – $750

2nd – $500

3rd  – $250

4th – $150

5th  – $100

 

In addition to cash purse opportunities, there are currently over $40,000 in bonuses and product available from companies like Arai, Yamaha Motor USA, Innovative Motorsports, REB Graphics, Woodcraft Technologies, Rise Moto, and Ghetto Customs.

“We will have several exciting announcements coming soon concerning additional partnerships for contingency and bonce programs” said N2 Business Development Manager Chip Spalding. “There will be lots of opportunity for teams to win some substantial rewards for participating in the N2/WERA Endurance this year including a new 2022 Yamaha Motorcycle for one of the class champions. We have new partners joining every week and we will be releasing program specifics soon.”

For more information on the N2 National Endurance Series by Dunlop as well as specifics on rules, classes, sponsors, contingency, and purse, please go to https://www.n2td.org/endurance/ . If you are interested in becoming involved as a sponsor, please contact Chip Spalding at [email protected]

About N2 Track Days:

N2 provides a structured riding environment for sport-bike riders of all levels promoting motorcycle safety through instruction on a closed course racetrack. Our instructors and coaching staff are comprised of club-racers, pro racers, and experienced track day riders who are articulate and passionate about all aspects of this sport. N2 strives to provide an enjoyable riding experience in an environment where members can hone their skills and inspire confidence in their riding ability. Riding with N2 means you and your sportbike gain access to a structured environment without the hazards, limitations, distractions, and obstacles that you’ll find on the street.

The N2 National Endurance Series is proudly sponsored by:

N2 Track Days, Dunlop Motorcycle Tires, Yamaha Motor USA, WERA Road Racing, Arai Helmets America, Innovative Motorsports, R.E.B Graphics, Woodcraft, Rise Moto, and Ghetto Customs.

Harley-Davidson Launches Pan America 1250 Demo Tour

HARLEY-DAVIDSON KICKS OFF PAN AMERICA ADVENTURE MOTORCYCLE DEMO TOUR

MILWAUKEE (March 23, 2021) – Harley-Davidson recently unleashed its bold take on adventure touring with the all-new Pan America™ 1250 and Pan America™ 1250 Special motorcycles. The spirt of adventure touring is one of endless possibilities and unrestrained freedom. From its inception more than a century ago, when many roads were little more than dirt trails, Harley-Davidson has stood for adventure. Riders will soon be able to experience that freedom first-hand as Harley-Davidson is proud to announce the Harley-Davidson Pan America Motorcycle Demo Tour. The tour kicks off in April, and signups for H-D-hosted demos are now available here: PAN AMERICA DEMO REGISTRATION. Demo opportunities at other major adventure touring, overland events and rallies, signups will happen on location.

“I’ve had the opportunity to ride a Pan America motorcycle both on and off-road, and can’t wait for riders to experience the innovations and capabilities that our team has built into this fantastic adventure touring bike,” said Jochen Zeitz, chairman, president and CEO of Harley-Davidson. “Now riders can experience for themselves the first motorcycle of its kind to be designed and developed from the ground up in America.”

The Pan America motorcycle introduces a revolution in technology, performance and accessibility with innovative Adaptive Ride Height and the all-new Revolution Max 1250 engine. Adaptive Ride Height is an industry-first motorcycle suspension system available on the Pan America 1250 Special that automatically transitions between a riding position when stopped, to an optimal ride height when the motorcycle is in motion. The lowered suspension at rest makes the motorcycle easier to mount and dismount, without sacrificing lean angles or ground clearance.

The Revolution Max 1250 engine is an all-new, clean sheet design, developed by the Harley-Davidson design and engineering teams. It is a 150hp, liquid-cooled 1,250cc-displacement V-Twin, the latest in the legendary powertrain lineage of the Harley-Davidson Motor Company. To minimize overall motorcycle weight (Pan America 1250 534lb. wet/Pan America 1250 Special 559lb. wet), the Revolution Max engine is integrated into the vehicle as the central member of the chassis. The Revolution Max 1250 is designed to offer smooth, low-end torque delivery and low speed throttle control that is optimized for off-road riding.

The Harley-Davidson Pan America Motorcycle Demo Tour will include stops at adventure touring and overland events and rallies as well as H-D-hosted demo experiences at locations that allow for riders to experience the capabilities of the Pan America™ on and off-road. The Demo Tour starts off in Texas on April 16, 2021.

CURRENTLY SCHEDULED* HARLEY-DAVIDSON PAN AMERICA MOTORCYCLE DEMO TOUR EVENTS: 

4/16-4/18, H-D-Hosted Demo, Dallas, TX

4/23-4/25, H-D-Hosted Demo, Albuquerque, NM

4/30 – 5/2, H-D-Hosted Demo, Phoenix, AZ

5/7 – 5/9, H-D-Hosted Demo, Las Vegas, NV

5/14 – 5/16, H-D-Hosted Demo, San Jose, CA

5/21 – 5/23, H-D-Hosted Demo, Lake Elsinore, CA

5/28 – 5/30, H-D-Hosted Demo, Sacramento, CA

6/4 – 6/6, Giant Loop Ride, Lawen, OR

6/12 – 6/20, Laconia Motorcycle Week, NH

6/25 – 6/27, Outside Adventure Expo, Salt Lake City, UT

7/9 – 7/11, H-D-Hosted Demo, Twin Falls, ID

7/15 – 7/18, Get On! ADV Fest, South Dakota

7/30 – 8/1, H-D-Hosted Demo, St. Louis, MO

8/6 – 8/8, H-D-Hosted Demo, Harrisburg, PA

8/13 – 8/15, H-D-Hosted Demo, Pittsfield, MA

8/18 – 8/22, Touratech DirtDaze, North Haverhell, NH

8/27 – 8/29, Overland Expo Mountain West, Loveland, CO

9/3 – 9/5, XLADV: High Sierras, Mammoth Lakes, CA

9/10 – 9/12, H-D-Hosted Demo, Salt Lake City, UT

9/16 – 9/19, Touratech Rally, Plain, WA

9/24 – 9/26, Overland Expo West, Flagstaff, AZ

10/ 8 – 10/10, Overland Expo East, Arrington, VA

10/22 – 10/24, H-D-Hosted Demo, Stamford, CT

10/29 – 10/31, H-D-Hosted Demo, Loudon, NH

11/6 – 11/7, Howling At The Moon, Prescott, AZ

*Locations subject to change or cancelation, check the PAN AMERICA DEMO REGISTRATION link for the most up to date information.

World Superbike: Aruba.it Racing Ducati Team Presented

The Aruba.it Racing – Ducati Team launch their 2021 WorldSBK season

The 2021 World Superbike season of the Aruba.it Racing – Ducati Team has officially kicked off today with the presentation of the two Ducati Panigale V4 R machines of Scott Redding and Michael Ruben Rinaldi.

The British rider is in his second season with the Aruba.it Racing – Ducati team after fighting for the World Championship Title until the final round in 2020. For Rinaldi, fresh from an excellent season in which he scored his first WorldSBK victory at Motorland Aragón, this can be considered as a comeback after winning with the Aruba Junior Team the 2017 Superstock 1000 Championship Title.

The whole team was the protagonist of an intense video that traced the bikes’ assembly phases before exiting the pit lane for an ideal grid alignment. On them, the original signatures of Stefano Cecconi (CEO Aruba S.p.A. and Team Principal Aruba.it Racing – Ducati), Claudio Domenicali (CEO of Ducati Motor Holding), Luigi Dall’Igna (General Manager of Ducati Corse), Paolo Ciabatti (Ducati Corse Sporting Director) and Daniele Casolari (Team Owner Feel Racing) stood out.

The video was filmed at Misano World Circuit, which will host the second round of the 2021 WorldSBK Championship, in mid-June, after the season opener at Aragón at the end of May.
The event was streamed on Ducati and Aruba.it Racing – Ducati social media, broadcasted and distributed by WorldSBK to the main Italian and international sports media.

 

Stefano Cecconi (CEO Aruba S.p.A. and Team Principal Aruba.it Racing – Ducati)

“Since 2015, we have officially represented Ducati in the Superbike World Championship, and our results have grown steadily to the second and third place obtained with Scott and Chaz last season. Our goal is to take that final step forward to reach the target we have set ourselves since the beginning of this adventure. After last year’s surprising debut, in 2021, we expect Redding to bring out his full potential. On the other hand, Rinaldi has had a long journey, including winning the Superstock 1000 title. It is a great satisfaction for us to see him in the factory team, and in light of his extremely convincing season with a private team in 2020, we hope he can do even better this year. I want to wish the team and the riders the best of luck for this season which, given the moment we’re experiencing, won’t be easy from a logistical point of view. Finally, my thoughts go out to all the fans: in the first few races, they probably won’t be able to be with us at the track, and we will certainly miss them. However, we’re sure that they will follow us from home, giving us all the warmth and affection that they have always given us over the years”.

 

Claudio Domenicali (CEO of Ducati Motor Holding)

“Ducati has been participating in the Superbike World Championship since its creation in 1988, and excitement is always high at the start of a new season. The Panigale V4 R is absolutely one of the closest road bikes to a real racing bike, and the fact that such a high-performance product is available to all enthusiasts makes us very proud. There is a strong union with Aruba.it, our long-standing partner, and a very important technological collaboration that starts on track and expands into the corporate digital and IT processes. With this in mind and supported by the talent of our riders Scott Redding and Michael Rinaldi, who are true ambassadors of our brand, we look forward to the start of the 2021 season with optimism”.

 

Luigi Dall’Igna (General Manager of Ducati Corse)

“The 2020 season has been exciting, and to see both of our riders fighting for top positions is a source of great satisfaction and pride for all of Ducati Corse. This year, with Scott and Michael, I’m sure we’ll be very competitive and that we’ll be able to take another step forward and further improve our bikes’ performance. I’m asking the team to give it their all, as always, and I believe that together we can achieve extraordinary results”.

 

Scott Redding (Aruba.it Racing – Ducati Rider #45)

“Last season was very exciting for me. The great support I received from Ducati and the extraordinary bond with the Aruba.it team were very important and gave me a deep desire to be competitive and win again. For this reason, I’ll give my best to make that step that we missed in 2020. I’m convinced I can do well because last season, I had the opportunity to gain a lot of experience with the Panigale V4 R, know new circuits, and understand the format of an exciting competition like WorldSBK. This will allow me to start on an equal footing with my competitors in 2021. I want to thank all the guys in the team who work hard every day. To the fans, I can say that I will try to entertain them on track to celebrate together at the end”.

 

Michael Ruben Rinaldi (Aruba.it Racing – Ducati Rider #21)

“In 2020, I got my first WorldSBK win, and it will always be a beautiful memory. However, the goals are higher now, and I will work hard to achieve great results with the Aruba.it Racing – Ducati team. After winning the Superstock 1000 Title with the Aruba Junior team, now it’s like coming home to my family. Wearing these colors is a great honor, and that makes me very proud, as I think it makes all the guys in the team proud because it means that the path we have taken has been positive. Joining the factory team also means having all the support from Ducati, the guys on the track and everyone who works at Borgo Panigale. I want to tell my team that I’ll do everything I can to make sure they have fun during the 2021 season, while I want like to ask the fans to continue to support us even if there will be some difficult moments because thanks to their warmth, we’ll be able to overcome them in a big way”.

AHRMA: Orloff Wins Vintage Cup Races At Carolina Motorsports Park

Kershaw, SC., March 23, 2021 – Heated battles took the chill off rounds 3 and 4 of the American Historic Racing Motorcycle Association’s (AHRMA) 2021 Vintage Cup during the March 20-21 weekend at Carolina Motorsports Park.

500 Premier, which features iconic racing motorcycles from the 1960s, is the road racing class AHRMA is highlighting during 2021. Special awards and coverage are being provided by class sponsors Roadracing World (roadracingworld.com) and NYC Norton (nycnorton.com).

The class included Wes Orloff, from Milwaukee, Wisconsin, aboard Dale Coffman’s Honda 450, and Helmi Niederer on his NYC Norton Seeley G50, first time back on the track after recovering from a broken shoulder at Barber 2019.  Tony Reed was on his fast BSA B50 along with other BSA racers Andy Findling, Chuck Crocco, and David Rutherford.  Dave Roper joined the grid on the historic Dick Mann Special AJS 7R.  Rounding out the grid was Jerry Duke on his Ducati 350 Scrambler.

Saturday’s race was held in the early afternoon with weather conditions vacillating between Winter and Spring.  There was optimism in the paddock that the racing surface temperature would be warm enough to provide the tire grip needed in close vintage motorcycle competition.

Orloff took the holeshot on Saturday’s race which allowed him to avoid traffic in the first corner.  Neiderer lost the front end in the melee which also took out Vintage Cup points leader Reed’s rear wheel, taking him out of contention to earn Vintage Cup points in the race.  When the race was restarted, Orloff took another holeshot and a flag-to-flag victory.

Warmer weather and higher track temperatures offered better conditions for Sunday’s race. All of the bikes damaged during Saturday’s fracas had been repaired and the racers ready for a rematch.

At the start, Tony Read experienced mechanical issues and was unable to launch his BSA.  In a repeat of Saturday, Orloff got a strong start which he leveraged into a sizable lead.  Roper followed with Niederer in third for the duration of the race. Duke and Rutherford rounded out the top five with Findling and Crocco on their well turned-out BSAs also in the mix.

“Wes Orloff is one of the most congenial, gentlemanly fast guys out there and it’s always good for him to take a win, and he took two this weekend,” said Kenny Cummings of NYC Norton, sponsor of the 2021 Vintage Cup. Cummings continued, “At the same time, the Cinderella story of Tony Read is something we expect will continue in future races.  CMP brought him some bad luck this last weekend, but he’ll be back. The Vintage Cup is now equal points between Reed and Orloff with 2000 points each.  We know there is more excitement to come.”

Rounds 5 and 6 will be at Streets of Willow in Rosamond, CA, April 16-18, 2021.

 

Race Results (Saturday, March 20):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 AJS 7R

3 – Jerry Duke, 1967 Ducati 350 Scrambler

4 – David Rutherford, 1971 BSA B50

5 – Andy Findling, 1961 BSA Gold Star

6 – Chuck Crocco, 1971 BSA B50

 

Race Results (Sunday, March 21):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 Harley-Davidson CRTT

3 – Helmut Niederer, Seeley G50

4 – Jerry Duke, 1967 Ducati 350 Scrambler

5 – David Rutherford, 1971 BSA B50

6 – Andy Findling, 1961 BSA Gold Star

7 – Chuck Crocco, 1971 BSA B50

 

AHRMA (American Historic Racing Motorcycle Association) is a not-for-profit organization dedicated to preserving, restoring, and competing on historic motorcycles. With more than 3,000 members, AHRMA is the leading historic motorcycle racing group in North America and one of the largest in the world. The association’s enthusiastic membership reflects this country’s strong interest in classic bikes.

MotoGP: 2021 World Championship Kicks Off This Weekend In Qatar

Lights, camera… RACE WEEK! MotoGP™ revs back into life

After a long winter break and five days of official testing, the time has finally come to suit and boot up for racing. Are you ready?

Tuesday, 23 March 2021

First we saw the liveries, then we saw the class of 2021 head out for testing. Now, at the floodlit oasis of Losail International Circuit, it’s time to get suited and booted for another season of stunning competition. Rarely is anything predictable in this era of MotoGP™, but there is at least one certainty everyone can agree on: we’re most definitely ready to go racing. Are you?

This season, the headlines are overflowing before a lap has even been ticked off in anger. A new reigning Champion begins the year on the throne, Joan Mir (Team Suzuki Ecstar), and the world waits with bated breath to find out when we will get to see the return of eight-time World Champion Marc Marquez (Repsol Honda Team), although we know it won’t be to race in Qatar. Rider and team musical chairs leaves us with a different grid and new colours for many, as well as a few new faces as we welcome four rookies. But it’s the same incredible level of competition: thousandths are the new hundredths in MotoGP™.

And so we arrive into Round 1. Doha hosts the first and second Grands Prix of the season and Losail also opened its doors for all the official winter test days this year, so we’re not heading in blind but we are heading in primed. Jack Miller (Ducati Lenovo Team) arrives with the biggest target on his back, flanked by a flotilla of Yamahas as the testing timesheets saw the Aussie and his teammate Francesco Bagnaia bookend a top five reigned by Ducati and Yamaha. But there’s more to racing than one-lap speed…

Miller will definitely be one to watch as the lights go out, however, as will Bagnaia. Both are full factory this season and the pressure is certainly greater, but so too are the performances we’ve seen so far. Losail has also seen the Borgo Panigale factory enjoy some serious success of late, and the stage is set for the Bologna bullets to start the season where they’ll wish to go on: the front. That’s not forgetting the likes of Johann Zarco either as the Frenchman moves to Pramac Racing and enjoys ever more experience with the Italian machine, also proving his mettle in testing. The holeshot heroes have some serious top speed and three experienced riders who look ready, on paper, to get straight in the mix.

The timesheets in testing were far from a one-trick pony though. Three Yamahas ended the test within less than a tenth and a half of Miller at the top: Maverick Viñales (Monster Energy Yamaha MotoGP), Fabio Quartararo (Monster Energy Yamaha MotoGP) and last year’s Championship runner up Franco Morbidelli (Petronas Yamaha SRT). Viñales starts the year settled in, Morbidelli likewise. Quartararo switches to the factory Yamaha squad, but seems to have immediately found his footing. So too has nine-time World Champion Valentino Rossi at Petronas Yamaha SRT as the legendary Italian – never one to push for a stunner in testing but still near the top ten – was full of enthusiasm after the five days on track that prefaced the season. After a 2020 of highs and lows for the Iwata marque, and Ducati to an extent, are the two factories who took testing by the horns the two who arrive into the first Grand Prix ready to do the same in race trim?

Just behind them, sixth in testing saw Aprilia come to the fore. Aleix Espargaro (Aprilia Racing Team Gresini) put the Noale factory’s nearly all-new bike right up there every time he went out on track, and increasing expectation has so far been backed up by ever-increasing pace. What can the number 41 do once the lights go out? With teammate Lorenzo Savadori coming back from injury and also a rookie, Espargaro is the man in the spotlight for the new bike as racing gets underway in earnest. We’ve seen flashes of brilliance, but the 2021 aim for Aprilia will be to sustain that.

And then there’s Suzuki. Seventh and eighth was where reigning Champion Joan Mir and Suzuki Ecstar teammate Alex Rins ended the Qatar Test, and the feedback was positive. Consistently fast and consistently threatening in 2020, nothing in testing said Suzuki won’t be out the blocks to defend both the riders title and the teams’ Championship. The Hamamatsu factory’s Achilles heel – if such a thing exists in a season of such success – was qualifying last season, so that may be the first thing to keep a keen eye on as Saturday arrives. It seems though that nothing big to report may translate into “yes, we very much require the Jaws music once the lights go out for racing”… with test rider Sylvain Guintoli already having been working on their 2022 engine during the Qatar Test. If that’s not a mark of feeling everything is under control…

As race weekend arrives, meanwhile, we will be left waiting for the answer to one of the biggest questions: when will Marc Marquez return? Sidelined by injury after Jerez last year, it’s been a long, long road of surgery and recovery for the eight-time World Champion but the signs are looking good. Recently on track on a Honda RC213V-S in Catalunya and Portimão and looking ever more ready to race, there was certainly more than enough to make a good few rumours. His return won’t be in Qatar, however, so the foreboding music for his rivals remains on low for now.

On the other side of the Repsol Honda Team garage there’s plenty to talk about too though. Pol Espargaro joins the fold and, after an impressive trajectory over the past couple of seasons, began 2021 with an equally impressively quick adaptation to the Honda. Fast and fast often, the Spaniard was tenth overall in testing and could be a dark horse for much further forward as the race weekend begins, with each session of track time only giving him more experience of his new bike and team. Premier class podium finisher? Check. Race winner is the next goal.

LCR Honda Idemitsu’s Takaaki Nakagami will be hoping to move forward too after a slightly more muted test, as both he and new teammate Alex Marquez (LCR Honda Castrol) suffered a few crashes – the latter also injuring his foot but ready to head back out for Round 1. Both fought for podiums last year and Alex Marquez successfully, as a rookie no less, so they’ll want to move back up the field to where they’d left off last season.

That’s also true of KTM. The Austrian factory ripped up the history books and wrote a few replacements in 2020, with Brad Binder (Red Bull KTM Factory Racing) winning them their first MotoGP™ race – and his, as a rookie and the first premier class winner from South Africa – and new teammate Miguel Oliveira then adding two more MotoGP™ victories for KTM as well as becoming the first Portuguese premier class winner. Oliveira, now alongside Binder in the Red Bull KTM Factory Racing team, was the fastest Austrian machine in testing, but the two were side by side in P16 and P17. They’ll want more once the lights go out as KTM look to continue their roll of incredible success, but we’ve said it before and we’ll say it again: testing is testing. Friday practice, qualifying and then finally the first race of the year are often a wiser litmus test.

Iker Lecuona (Tech3 KTM Factory Racing) will be looking for more this year too as he starts his second season, needing to move up from where he ended testing, and new arrival Danilo Petrucci (Tech3 KTM Factory Racing) will be interesting to watch too as he adapts to his new bike.

Speaking of adaptation, there’s also plenty to keep an eye out for as the Moto2™ graduates begin their first seasons, eager to get in the mix. Savadori is a rookie but with a few events under his belt by now, whereas the trio of rookies moving up from the intermediate class tasted MotoGP™ for the very first time in the Qatar Test. The fastest of the three was Jorge Martin (Pramac Racing) in 14th, but it was incredibly close as reigning Moto2™ World Champion Enea Bastianini (Avintia Esponsorama) was just 0.022 further back. Luca Marini (Sky VR46 Avintia) was a little more in arrears but also impressed, and just like those adapting from one factory to another… every session is just another chance to improve.

The stage is set, the floodlights are primed and the grid is ready to start another rollercoaster season of incredible racing with the Barwa Grand Prix of Qatar. Don’t miss it, with lights out for the first MotoGP™ race of 2021 at 20:00 (GMT +3). Let’s GO!

MotoGP™ Qatar Test top five:

1 Jack Miller – Ducati Lenovo Team – Ducati – 1:53.183

2 Maverick Viñales – Monster Energy Yamaha MotoGP – Yamaha – +0.061

3 Fabio Quartararo – Monster Energy Yamaha MotoGP – Yamaha – +0.080

4 Franco Morbidelli* – Petronas Yamaha SRT – Yamaha – +0.140

5 Francesco Bagnaia – Ducati Lenovo Team – Ducati – +0.261

*Independent Team rider
 

 

Too close to call? Moto2™ gears up for 2021

Lowes, Bezzecchi and Gardner headline an all-star cast in the intermediate class

If testing taught us anything ahead of the Barwa Grand Prix of Qatar, it’s that Moto2™ is almost too close to call. Day 2 saw six riders within 0.089, and on Day 3 the top three were split by just half a tenth – giving a whole host of names the right to call themselves contenders. So let’s take a look at a few, but by no means all.

The fastest man in Qatar so far in 2021 is Sam Lowes (Elf Marc VDS Racing Team). The 2020 title challenger looks ready to pick up where he left off and you could likely call him the favourite. By far the most experienced of the quickest riders in testing, Lowes is in good shape for an assault on the crown and in a better position than this time last year when he missed the Qatar GP due to injury – and then he still took the fight all the way down to the wire…

Marco Bezzecchi (Sky Racing Team VR46), meanwhile, lurks just thousandths further back. The Italian also fought for the crown for much of the latter half of last season and became a Moto2™ race winner before a few mistakes derailed his final challenge. But mistakes can be a useful thing to a rider on a mission, because they teach lessons – and Bezzecchi has certainly proven himself a fast learner and a fast rider.

The same could be said of Remy Gardner (Red Bull KTM Ajo). The Australian has shown flashes of blazing pace and talent but sometimes peppered with mistakes or simple bad luck – including some serious injury struggles. Going into 2021, however, he’s with one of the most successful teams in the class and turned some good 2020 momentum into even more in pre-season testing. One of the quickest and most consistent in Doha so far, is this the moment it all starts to come together for Gardner? One thing’s for sure: the Aussie will push as hard as possible trying to make sure it does.

So who else looks threatening? Aron Canet (Inde Aspar Team) was a big presence on the timesheets on Friday and Saturday in testing and seems like he’s made another step forward to build on an impressive rookie season. Xavi Vierge (Petronas Sprinta Racing) had some serious speed too, and his teammate Jake Dixon – despite having been told his injury woes could even threaten his career – was another who seemed to have unlocked something even more as we begin 2021. Bo Bendsneyder (Pertamina Mandalika SAG Team) also seemed to have made a step forward. Now on a Kalex and with more experience under his belt, the Dutchman impressed in the test and could be one to watch. And what about Joe Roberts? The American moves to Italtrans Racing Team for 2021 and, after a stunner in Qatar last year, will want to start his new chapter in similar form.

It wouldn’t be a new year without some fresh faces either. Raul Fernandez (Red Bull KTM Ajo) flew the rookie flag the highest in the test as he immediately looked like a seasoned campaigner. Easily in the top ten and fastest rookie throughout, just that bit more – that he’ll be focused on finding in practice – could see him really start to challenge the more established names ahead of him too. Reigning Moto3™ World Champion Albert Arenas (Inde Aspar Team) moved up into the top ten on Day 3 too, and his old lightweight class sparring partners weren’t so far behind as Tony Arbolino (Liqui Moly Intact GP) and Ai Ogura (Idemitsu Honda Team Asia) also look to be settling in well. American Cameron Beaubier (American Racing) made solid progress too as he adjusts not from Moto3™ but MotoAmerica… and his rate of knots moving up the timesheets day by day was testament to progress. Who will strike first in the battle of the rookies, and will they take any veteran scalps along the way?

We’ll find out soon enough as the first battle – and the first Championship leader – is decided in the Barwa Grand Prix of Qatar. Moto2™ saddle up at 18:20 local time (GMT +3), with the first 25 points – and bragging rights – up for grabs.

Moto2™ Qatar Test top five:

1 Sam Lowes – Elf Marc VDS Racing Team – Kalex – 1:58.655

2 Marco Bezzecchi – Sky Racing Team VR46 – Kalex – +0.013

3 Remy Gardner – Red Bull KTM Ajo – Kalex – +0.048

4 Xavi Vierge – Petronas Sprinta Racing – Kalex – +0.177

5 Jake Dixon – Petronas Sprinta Racing – Kalex – +0.182

 

 

Veterans vs rookies: Moto3™ gets ready to rumble

Masia, Foggia, McPhee, Binder, Rodrigo; the veterans were up there in testing. But then there are the rookies…

What’s the perfect way to end the last day of testing? Probably something like Jaume Masia’s (Red Bull KTM Ajo) new – although unofficial – lap record. The Spaniard seems pretty settled in at Red Bull KTM Ajo already, and his warning shot will likely be heard by his rivals. But then, so too will that of new teammate Pedro Acosta. So is this season going to begin a clash of the rookies and veterans?

Masia’s lap was certainly a stunner, but we already know that Moto3™ is rarely a runaway game at the front and the likes of Dennis Foggia (Leopard Racing), John McPhee (Petronas Sprinta Racing), his new teammate Darryn Binder – adapting well to the Honda – and Gabriel Rodrigo (Indonesian Racing Gresini Moto3) won’t go down without a good few classic lightweight class battles. We also know that the rookies this year have hit the ground running in a way we’ve not seen for some time.

Acosta is one – the 2020 Red Bull MotoGP Rookies Cup winner second in testing behind only his teammate – and Izan Guevara (GasGas Gaviota Aspar Team) another as the reigning FIM Moto3™ Junior World Champion blazed out the blocks with some serious speed. What makes their performances all the more impressive is that they don’t know the track like they do some of the venues in Europe, and that’s something else to maybe make a few a little nervous later in the season. But for now, what is too much to ask? Wins? Podiums? They certainly have the speed, but the tactics will be a key test – as will holding their nerve.

That said, it’s been some time since this pedigree of CV has been on show. Both the FIM Moto3™JWCh and Rookies are known proving grounds and two of the most successful programmes on the Road to MotoGP™, but both Acosta and Guevara have even more in their track records. Acosta absolutely dominated the Rookies, which has been done before, but he also backed it up with race wins in the FIM CEV Repsol as he came third overall in the aforementioned FIM Moto3™ JWCh. Guevara, meanwhile, just can’t stop progressing. European Talent Cup winner in 2019, the Spaniard then moved to the FIM Moto3™ JWCh and by Jerez mid-season was almost unbeatable on his way to the crown. At Aragon, he won all three races – riders have done that before, a good match between man, machine and venue can create a little magic – only, after a nightmare qualifying, Guevara managed it three times in a row from outside the top 20 on the grid. Convinced yet?

Xavier Artigas (Leopard Racing), meanwhile, may not have been quite as near the front as his rookie compatriots, but he’s also already got a Grand Prix podium as he took to the rostrum on a wildcard in Valencia in 2019, too. On his first Grand Prix appearance. He ended the test in 11th, only just behind Darryn Binder, and shouldn’t be overlooked either after a season at the front in the FIM Moto3™ JWCh too – he’s the man who lost out on the crown to Guevara, losing a little momentum but after most definitely having done more than enough to impress regardless.

The timesheets gave us plenty to be excited about in testing. The lightning speed of the rookies and the aforementioned veterans alike, as well as riders like Romano Fenati (Sterilgarda Max Racing Team) and 2020 Rookie of the Year Jeremy Alcoba (Indonesian Racing Gresini Moto3) and their consistent pace. Who will take the first flag of the year in Moto3™? We’ll find out soon, after another 18 laps of wonderful lightweight class chaos.

Tune in for the Moto3™ race at the Barwa Grand Prix of Qatar at 17:00 (GMT +3) on Sunday the 28th of March.

Moto3™ Qatar Test top five:

1 Jaume Masia – Red Bull KTM Ajo – KTM – 2:04.263

2 Pedro Acosta – Red Bull KTM Ajo – KTM –  +0.306

3 Dennis Foggia – Leopard Racing – Honda – +0.440

4 Izan Guevara – GasGas Gaviota Aspar Team – GasGas – +0.455

5 Gabriel Rodrigo – Indonesian Racing Gresini Moto3 – Honda – +0.527

M4 ECSTAR Suzuki Names Supersport & Stock 1000 Riders

Suzuki Announces M4 ECSTAR Suzuki’s Supersport & Stock 1000 Riders for 2021

M4 ECSTAR Suzuki will field Sean Dylan Kelly and Sam Lochoff in the 2021
MotoAmerica Supersport Series, Wyatt Farris to compete in Stock 1000.

Brea, CA (March 23, 2021) – Suzuki Motor of America, Inc. announces the return of Team Hammer as its official road racing partner for the 2021 MotoAmerica AMA/FIM North American Road Racing Series. Team Hammer will field Supersport class riders using Suzuki GSX-R600s for 2021. The team returns to the 2021 MotoAmerica series as Team M4 ECSTAR Suzuki.

Riding for M4 ECSTAR Suzuki Supersport athletes include Sean Dylan Kelly and South Africa’s Sam Lochoff; who joins the team’s 600 class effort for 2021. Wyatt Farris joins M4 ECSTAR Suzuki competing in the Stock 1000 class on a GSX-R1000.

 

M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.
M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.

 

Florida’s Sean Dylan Kelly returns to Team Hammer for a third year in 2021.  SDK finished second in the 2020 Supersport Championship, having scored consistent podium finishes along with five Supersport class victories in 2020. Kelly enters 2021 with an abundance of momentum gained from a dominating pole position performance and strong second place finish in the 79th running of the legendary Daytona 200 recently at Daytona International Speedway.

 

18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.
18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.

 

Newcomer Sam Lochoff turned heads by landing on the podium in his MotoAmerica debut in 2019, finishing third in the Junior Cup season-opener. Following an abbreviated rookie season in 2019, Lochoff made his presence felt in 2020, earning 13 podium finishes — including five runner-up finishes, en route to an overall third place ranking in the 2020 MotoAmerica Junior Cup Championship.

 

Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.
Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.

Also new to M4 ECSTAR Suzuki is Wyatt Farris, joining as the team’s Stock 1000 rider for 2021.  Farris, from Calistoga, CA, is an experienced AMA Pro/MotoAmerica competitor, earning nine AMA Pro/MotoAmerica podium finishes, and taking third in the 2014 AMA Pro Supersport Championship. He finished a strong third in the 2016 Daytona 200. In 2017 he won the overall AFM Championship, was second in 2019, and topped the AFM overall points again in 2020.

In 2021, Team Hammer embarks on its 41st consecutive year of operating as an elite professional road racing team. In addition to an impressive list of accomplishments in various national and international motorcycle road racing championships, Team Hammer’s success at the AMA Pro and MotoAmerica National level is exceptional.

Team Hammer has earned an accumulated nine AMA Pro and MotoAmerica National titles while racking up 108 race victories and 291 podium finishes in multiple MotoAmerica Championship classes, AMA Formula Xtreme, AMA 750cc Supersport, and AMA Pro Daytona Sportbike series championships as well.

Along with an exceptional record of preparing, developing, and fielding championship-caliber equipment, Team Hammer is known for its consistent ability to identify and foster road racing athletes, whether they be up-and-coming riders, overlooked international competitors, or established veterans looking to reignite their careers with Team Hammer.

M4 ECSTAR Suzuki will debut its full team lineup on March 30-31 at the 2021 MotoAmerica Official Test at Circuit of the Americas in Austin, TX.

Phase Two Of Triumph Electric Motorcycle Development Completed

PROJECT TRIUMPH TE-1

CREATING UK ELECTRIC MOTORCYCLE CAPABILITY

PHASE 2 – POWERTRAIN PROTOTYPE

With the exciting reveal of the innovative advanced electric powertrain and battery and the first styling sketches for the final Project TE-1 Prototype, Phase 2 of this landmark four phase collaboration in British design and engineering reaches a successful conclusion.

Delivering on the objectives announced at the start of the TE-1 project in May 2019, focused on developing specialized electric motorcycle technology and innovative integrated solutions, this unique collaboration between Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd, and WMG at the University of Warwick funded by the Office for Zero Emission Vehicles, has already achieved significant results.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle showing the motorcycle plugged into a charging cable. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle showing a charging cable plugged into the bike. Image courtesy Triumph.

 

Including innovation in battery and powertrain design, initial test performance results far exceed the current benchmarks and industry targets. Developments in performance, efficiency, and range is enabling Project TE-1 to fully deliver the partnership’s objectives to enhance the credibility and profile of British industry providing substantial input into the future electric motorcycle strategy from Triumph.

 

  • Announcing the completion of Phase 2 – The reveal of the battery and powertrain prototype, initial high level performance results, and the first design concept drawings for the Project TE-1 Prototype motorcycle that will be created at the end of the next phase.

 

  • Key project achievements to date – Test results show significant innovation in mass, battery technology, and powertrain performance that exceeds the target set by the UK Automotive Council for 2025, meeting the project’s ambitious objectives to deliver genuine innovation for a new standard in fully usable electric motorcycle performance.

 

  • Project TE-1 is a unique collaboration between four major UK industry and academic leaders – Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd.’s
    e-Drive Division, and WMG at the University of Warwick

 

  • The objective of this two-year project is focused on developing electric motorcycle capabilities – It will provide an input into Triumph’s future electric motorcycle offer, drive innovation, capability and new intellectual property, and enhance the credibility and profile of British industry and design.

 

  • Project TE-1 is funded by the UK Government’s Office for Zero Emission Vehicles (OZEV), and delivered through Innovate UK

 

A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.
A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.

 

“The completion of Phase 2, and the promising results achieved to date, provide an exciting glimpse of the potential electric future and showcase the talent and innovation of this unique British collaboration. Without doubt the outcome of this project will play a significant part in our future efforts to meet our customer’s ambition and desire to reduce their environmental impact and for more sustainable transportation.” said Nick Bloor, Triumph CEO. “This important project will provide one of the foundations for our future electric motorcycle strategy, which is ultimately focused on delivering what riders want from their Triumph; the perfect balance of performance, handling, and real-world usability, with genuine Triumph character.”

 

PROJECT TE-1 – PHASE 2 OUTCOMES

Battery and powertrain prototype

Williams Advanced Engineering (WAE)

Based on the agreed specification, we identified appropriate cell technology and battery architecture to deliver the performance objectives. Using this as a framework, we then optimized the battery module layout to balance mass and positioning within the prototype chassis, taking into consideration center of gravity, space, and relationship with the powertrain and charging approach.

In addition to the module layout, we have also developed a new and unique vehicle control unit which is integrated into the battery pack to minimize weight and packaging. In parallel, WAE has also created innovative battery management software to ensure power is delivered in relationship to battery performance.

The outcome of Phase 2 for WAE includes a fully bench-tested battery with performance results that exceeds anything else on the market in terms of Power and Energy Density.

 

Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.
Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.

 

“We are delighted to be working on this project, working to deliver next-generation battery technology and control systems. Within the current landscape, most electric motorcycle technology arguably delivers compromised performance at low levels of battery charge. By using a lightweight, compact solution, we have been able to give the rider all of the performance all of the time (regardless of battery charge), and a class leading range. We have focused on pushing the boundaries to reduce mass and optimize frame position to benefit handling. We have also pushed the limits of battery performance, balancing the design for acceleration and range, with simulations modelled on track-based riding. In other words, as aggressive as possible,” said Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. “The energy density of this new battery will be a significant step forward from existing technology giving the rider more power, for longer. WAE has also designed and developed an electronic control unit from the ground-up, combining the battery management system with the bike control functions in one package. This is a first for this market, benefiting packaging and integration while optimizing performance and range.”

 

Integral Powertrain Ltd.’s e-Drive electric motor/invertor unit from the right side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit from the right side. Photo courtesy Triumph.

 

Integral Powertrain Ltd.’s e-Drive Division

Our experience in cutting edge motor and inverter design and manufacture has helped us to push this technology on to the next level for the TE-1 project. In Phase 1 we worked to integrate the normally separate motor and inverter into one single, compact package. Integration reduces the mass and volume of the drivetrain by reducing additional boxes on the vehicle, mounting features, coolant pipework, and heavy high voltage connections.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.

 

The innovative integration concept is also a fully scalable one, whereby the number of power stages can increase for larger diameter, higher torque motors for example. Combined with our state-of-the-art motor technology, we have seen very exciting results already, with the motor achieving a power density twice that of the target set by the UK Automotive Council for 2025.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.

 

We have also implemented advanced silicon carbide switch technology in the inverter. This reduces losses in the inverter and results in greater drivetrain efficiency, power delivery, and range. At the end of Phase 2, we are proud to have built a fully operational, new prototype motor that has been bench tested and is delivering on all aspects of performance.

 

Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.
Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.

 

“One of the most influential factors in how well a motorcycle handles and performs is mass, so at Integral Powertrain we have focused heavily on making a step change in motor and inverter design, removing heavy high voltage cables for example. This delivers a product that is significantly more compact and lighter than anything currently available on the market. The motor produces almost 180 horsepower (130kW), but weighs only 22 pounds (10 kg), much lighter than existing technology and clearly a small fraction of the mass of traditional internal combustion engines.” said Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. “The silicon carbide switch technology in our new scalable integrated inverter will help set new standards in terms of electric motorcycle efficiency; application of this technology means a lighter weight overall with significantly more performance and range. In parallel, we have a very strong focus on design for manufacture and assembly activity, so that all this high motor and inverter performance can be offered cost-effectively. Ultimately, this is really going to be an industry-leading powertrain that will help define the future of electric mobility. With the TE-1 project we are proud to be part of this landmark project for British industry.”

 

WMG, at the University of Warwick

At WMG we have been working closely with all the TE-1 partners during Phase 1 and 2 to develop representative models to simulate the systems of the bike including battery, motor, and vehicle control. Initially this allowed us to validate the specification against the intended component selection by assessing performance criteria such as range and top speed with initial models. This has enabled Triumph to carry out software development at an early stage prior to hardware being built with thorough testing programs to ensure that real-life testing can deliver on refinement. Most recently we have been conducting powertrain rig testing using the prototype IPT powertrain to ensure our simulations are accurate and to confirm that the motor functions within the system as intended. We have also been providing guidance to Triumph relating to future legislation, charging infrastructure and recycling strategies that will need to be implemented across future electric motorcycle platforms.

 

The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.
The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.

 

“Our creation of initial computer-based simulation models at the start of Phase 1 has been instrumental in ensuring that the component selection was appropriate to achieve the performance targets defined by the partners for the TE-1 Prototype. We have continued with this work across Phase 2 of the project, refining the models to a much more complex level to allow us and the partners to imitate further components on the bike such as braking, throttle, lighting and other systems and mimic real-world riding to provide development opportunities before components were fully designed. Additionally, we have created a physical rig wired with all the control units, to implement a design validation test program to ensure the function of each section was within the allowable range.” said Truong Quang Dinh, Assistant Professor of Energy Management and Control Systems at WMG, University of Warwick.

 

Triumph Motorcycles

Throughout Phase 2 Triumph have developed an all-new advanced vehicle control software which incorporates all the electrical systems to ensure intuitive throttle response, regen braking, traction control and all of the dimensions that a customer would expect from a high-performance Triumph motorcycle. Additionally, we have integrated leading functional safety strategies into this software, plus supported WMG in rig testing and have also fully developed the new prototype instrument display. Alongside this electrical and control system work, we have designed a brand-new prototype chassis including main frame and rear frame which have been optimized alongside the battery and motor packages which will be further evolved in Phase 3 into the TE-1 Prototype which will be used as a mule test platform in Phase 4. During this chassis development we have taken into account both the transmission design and the final styling of the TE-1 Prototype, the drawings of which we are pleased to reveal for the first time today.

 

Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.
Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.

 

Steve Sargent, Triumph’s Chief Product Officer said “The starting point for us in the TE-1 project was to gather important customer feedback about what riders really want from their motorcycles and understand how an electric motorcycle can provide the experience that riders desire. This includes considering the type of riding, range, feel and nature of power and torque delivery together with the ergonomics and bike controls. Taking all this feedback into consideration we began the chassis design, focusing on bringing everything together on the TE-1 Prototype in a way that provides a riding experience that is exciting and new, but ultimately familiar. We have begun to define the powertrain and battery interaction through the use of software refinement to deliver an exhilarating power delivery and throttle response, which provides great control and feels intuitive to the rider. Overall, with the styling we wanted to create something that is fresh and exciting but a natural evolution of the Triumph brand. Something desirable in its own right, with distinctive Triumph DNA and definitely not something that is different just for the sake of being different. Pulling all of this together with the partners we are thrilled to see the progress of such an exciting demonstration vehicle which incorporates the cutting-edge technology needed to guide the strategy for the future roadmap of electric motorcycles from Triumph. The team are proud to be leading such an innovative, strong and dynamic project with a fantastic group of partners which ultimately should set British engineering and design rightly at the forefront of future 2-wheel design.”

  

PROJECT TE-1 OVERVIEW

Project TE-1 collaboration – Triumph Motorcycles, industry experts, academic leaders, and UK Government

 Project Triumph TE-1 is a ground-breaking collaboration between Triumph Motorcycles and the UK’s electrification experts, each of whom is focused on creating innovations in their own areas:

 

  • Triumph Motorcycles is leading the project, providing advanced motorcycle chassis design and engineering expertise, manufacturing excellence and pioneering functional safety systems, as well as defining electric drivetrain power delivery characteristics.

 

  • Williams Advanced Engineering is providing industry-leading lightweight battery design and integration capability, using its test and development facilities to deliver an innovative battery management system combined with vehicle control unit.

 

  • Integral Powertrain Ltd.’s e-Drive Division is leading the development of bespoke power-dense electric motors and a silicon carbide inverter, integrating both into a singular motor housing.

 

  • WMG, at the University of Warwick is providing electrification expertise, and the critical vision to drive innovation from R&D to commercial impact, through modelling and simulation based on future market needs.

 

  • The Office for Zero Emission Vehicles (OZEV) is a team working across government to support the transition to zero emission vehicles, as well as funding to support chargepoint infrastructure across the UK. This will contribute to economic growth and will help reduce greenhouse gas emissions and air pollution on UK roads. OZEV is part of the Department for Transport and the Department for Business, Energy and Industrial Strategy.

 

  • Innovate UK is the government’s research and innovation agency that supports business led R&D funding and UK business growth.

 

A two-year project focused on developing technical innovation and advanced electric motorcycle capabilities

 The project is organized into four main phases, with one of its key aims being increased systems integration. By developing individual components of automotive-based electric drivetrains and optimizing them into innovative combined units, the project aims to deliver sophisticated electric motorcycle systems which reduce mass, complexity, and package requirements.

Triumph Motorcycles is working alongside the partner organizations to accelerate joint expertise in the packaging and safety of batteries, optimum electric motor sizing and packaging, the integration of braking systems including regenerative braking, and advanced safety systems. The innovation and capabilities developed in these areas will input into Triumph’s future electric motorcycle strategy.

The Project Triumph TE-1 partnership, with the support of the Office for Zero Emission Vehicles and Innovate UK, is focused on facilitating the creation of:

  • Electric motorcycle capability that meets the needs of customers seeking lower environmental impact transportation, delivering against the UK’s focus on reducing emissions
  • Strong, commercially viable, and sustainable partnerships with UK industry manufacturers
    and supply chains
  • Expertise and capability within the UK workforce, creating jobs and a talent base that both ensures sustainable employment and drives the UK’s reputation and influence on the world stage.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Dr Francesca Iudicello CEng MIMechE – Program Manager – Automotive Zero Emission Vehicles – Innovate UK

“Innovate UK has worked in close partnership with the Office of Zero Emission Vehicles to deliver the integrated delivery program since 2013. This provides funding to ground-breaking innovation in the automotive sectors for zero emission vehicle technologies from proof of concept to vehicle demonstration.

The TE-1 project is a part of this program under the IDP15 competition and is aligned with the road to zero policy and marks an important milestone towards zero emission vehicles and the race to net zero.

We are proud to have delivered the funding for this project which is a pioneering project for the zero-emission vehicle motorcycle manufacturing in the UK as it has successfully developed, thanks to a very talented group of innovators, the very first Triumph electric motorcycle in a very quick development time and prepared the groundwork for the future of electric motorcycles.”

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Jon Bray – Research & Development (R&D) Lead – Office for Zero Emission Vehicles

“Investment in Research and Development is key to our mission of putting the UK at the forefront of the design, manufacture, and use of zero emission vehicles. By supporting these technologies, we are helping to deliver our road transport decarbonization goals, while anchoring economic activity across the UK, which will support the green recovery in the wake of the pandemic.

This is why the Office for Zero Emission Vehicles continues to design and fund a series of R&D competitions, which support UK innovation in developing zero emission vehicle and charging infrastructure technologies.

Triumph’s TE-1 project is part of our diverse R&D portfolio of ambitious electrification projects, which are addressing challenges in line with our accelerated phase-out ambitions of petrol and diesel cars and vans and electric vehicle commitments in the Prime Minister’s Ten Point Plan.

We are excited to see that our funding is supporting Triumph Motorcycles in driving forward innovation and capability in the electric motorcycle space, while fostering collaboration between several pioneering UK companies”.

Melissa Paris Reviews Suzuki Katana Accessories, In The March Issue

Featured In the March 2021 issue of Roadracing World:   

     “We started by installing a slightly taller-than-stock version of what Suzuki calls a ‘meter visor,’ and it took just over five minutes. All the necessary hardware is included along with detailed instructions, which is pretty impressive considering the entire procedure is simply removing four bolts, swapping the visor, and reinstalling with four bolts.

      “The added wind protection will be nice for anyone who spends time on the highway while still retaining a clean, OE look…” 

—Product Evaluation: Suzuki Katana Accessories, by Melissa Paris.

 

            The Product Evaluation we did on official accessories for the Kawasaki Z900RS retro bike proved popular, so we’re now looking at official Suzuki accessories for the latest version of the Katana. We enlisted the help of experienced racer and race mechanic Melissa Paris. It’s all in the latest issue of Roadracing World!

 

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

PREVIEW the March 2021 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW . Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday. Read the March 2021 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world

 

MotoGP: Rossi Says He Feels Strong And Excited To Start Season

Valentino Rossi (46). Photo courtesy PETRONAS Yamaha SRT.
Valentino Rossi (46). Photo courtesy PETRONAS Yamaha SRT.

Season opener beckons for PETRONAS Yamaha Sepang Racing Team

Franco Morbidelli and Valentino Rossi ready for first race of 2021 in Qatar

This weekend will see the commencement of the 2021 MotoGP championship for PETRONAS Yamaha Sepang Racing Team’s Franco Morbidelli and Valentino Rossi with the Grand Prix of Qatar. It will be the first MotoGP race since 2019 at Losail International Circuit, after the 2020 edition was cancelled for the premier class.

The event will signal the start of Morbidelli’s third season with the Malaysian squad, a pairing that saw him become vice-champion last year. The Italian enjoyed a successful pre-season test at the Qatar track and will be hoping to use that momentum to start the season with a great result at the first round. Although Franco has not finished inside the top-ten in his two premier class Qatar races, he does have good form at the circuit after winning his Moto2 race there in 2017.

This Sunday will see the 9-times World Champion Valentino Rossi continue his new challenge as he enters his first race as a PETRONAS Yamaha SRT rider, and his first with fellow Italian Morbidelli as his team-mate. Valentino has good form at Losail having previously visited the MotoGP podium eight times previously, including victories in 2010 and 2015. Combining this past experience with the positive pre-season test, Rossi will be hoping for a good start to his 2021 campaign.

The Grand Prix of Qatar will begin for Morbidelli and Rossi at 3.40pm local time (8.40pm MYT) with Free Practice 1 on Friday, before the first MotoGP race (22 laps) of the 2021 season gets underway at 8pm local time (1am MYT).

Franco Morbidelli

I think we are ready for the first race of the season. We worked hard in testing, tried several things and then focused on setting up the bike for the Qatar track. The set-up is never perfect, you can always find things to change and improve, but I think we have a really good base. To have a good race there you need to be fast, have a good pace, to be consistent and understand which is the right tyre. It’s hard to know from testing what the target should be, but we want to aim to be in the top-five and to fight for the podium – we think it’s possible. We’ll see where we are though on Sunday.

Valentino Rossi

After testing in Qatar, I feel quite strong and the balance of the bike is good. I achieved my best-ever lap of the circuit, which was an important and positive thing to do. I think there are a lot of riders on different bikes that are also strong, but we’re definitely in the pack with them. Our race pace looks to be good, so I feel like we are ready to start the season in Qatar this weekend. There is a really good atmosphere in the team; we’ve worked well and in the right direction. I’m excited to start the season properly in a few days’ time.

MotoAmerica: Uribe Riding FLY Racing/ADR Motorsports Superbike

Jayson Uribe (36X) in action at Buttonwillow Raceway Park. Photo by Max Klein/Oxymoron Photography, courtesy Jayson Uribe.
Jayson Uribe (36X) in action at Buttonwillow Raceway Park. Photo by Max Klein/Oxymoron Photography, courtesy Jayson Uribe.

Jayson Uribe, age 21, has signed with FLY Racing/ADR Motorsports to race a Suzuki GSX-R1000 in the 2021 MotoAmerica Superbike Championship.

“David [Anthony, FLY Racing/ADR Motorsports rider/owner] reached out to me and asked what my plan was for 2021,” Uribe told Roadracingworld.com. “I told him we had some things in the water but didn’t have anything signed yet. From there, we started talking back and forth about somethings we wanted to do and what we had in mind.

“We had an opportunity to test Dave’s bike in late January, and later that week we signed a contract for 2021. It’s been good so far. I love the team, and I love David. He’s a really great guy. I’m just trying my best to get used to the bike.”

After several seasons racing successfully in the British MotoStar (Moto3) National Championship, the French 600cc Superstock National Championship, and the FIM CEV Repsol Moto2 European Championship, Uribe returned to America and focused on club racing locally with AFM, where he won the club’s #1 plate in 2019.

Uribe also made appearances in selected MotoAmerica events in the Superstock 600, Supersport, and Superbike classes, including a podium finish in Supersport at Utah Motorsports Campus in 2017.

During this time, Uribe has also been doing a formal apprenticeship to be an electrician and more recently has become a volunteer firefighter for the Napa County Fire Department.

“Yes, I’m in my last year of my apprenticeship to be an electrician and I’m still a volunteer firefighter,” said Uribe. “The firefighting thing is something I’ve always been interested in since I was a kid, but I never pursued it until 2017 when we had a pretty big fire that was right by my house. That was the turning point for me. I felt I needed to get off my butt and make this happen. I went to the academy, graduated, and here we are.”

In fact, Uribe spent approximately 30 days on the fire lines fighting wildfires in California in 2020 and was still able to race with AFM and in selected MotoAmerica events. But for 2021, Uribe said racing is his priority.

On March 21, Uribe used his new Suzuki Superbike to beat his team owner/teammate Anthony and win the AFM Formula Pacific race at Buttonwillow Raceway Park.

Uribe said the next time he will be in action will be March 30-31 at the official MotoAmerica/Dunlop test at Circuit of The Americas.

N2/WERA National Endurance Series Announces Purse, New Class

The starting grid of an N2/WERA National Endurance race. Photo courtesy N2 Track Days.
The starting grid of an N2/WERA National Endurance race at PittRace. Photo courtesy N2.

N2/WERA National Endurance Series by Dunlop Announces 2021 Purse Structure, Classes, Rules, and Sponsors.

Media, PA (March 2021) – N2 Track Days, the premier track day organization in America, in association with WERA Motorcycle Road Racing, is proud to announce new rules and classes for the 2021 N2/WERA National Endurance Series by Dunlop. In addition to new technical rules, N2 is proud to announce some incredible new partnerships that will provide a lucrative contingency, bonus, and purse pay out for all participating teams and riders. One class champion will even receive a new 2022 motorcycle from Yamaha Motor USA! The series will be officiated by WERA Motorcycle Road Racing and will be held in conjunction with WERA Sportsman Series events.

The 2021 N2/WERA Endurance Series by Dunlop will consist of five rounds from April through September. Each event will consist of a N2 track day on Friday, N2 Endurance on Saturday, and WERA sprint racing on Sunday. N2 Endurance on Saturday will have two endurance races. The first will be a 2-hour Endurance race for ultralightweight machines such as Yamaha YZF-R3, Kawasaki Ninja 400, KTM RC 390 and others. The main event will be a 4-hour Endurance race for the traditional heavyweight, middleweight, and lightweight machines. New for 2021 will be the Road Race Relay class that will race during the 4-hour main event.

The new Road Race Relay class is designed to be an entry-level class for racers who would like to try endurance, but do not have dedicated endurance equipment like high-capacity tanks, fuel dump cans, and quick-change wheel equipment. Teams will consist of a minimum of two riders on two separate motorcycles with a single electronic transponder. Instead of traditional pit stops where the team changes tires and fuel on a single motorcycle, the Road Race Relay pit stop will consist of a transponder swap to a new rider with a new motorcycle. The goal is to use the resource of each team to travel as much distance as possible with the transponder for the fixed duration of the race. Contingency, bonuses, and purse will be available for successful teams.

“We are very excited about the Road Race Relay class,” said N2 Track Days CEO Rob Cichielo. “The introduction of this class allows new racers to try their hand at endurance racing without committing to the expense of quick-change gadgetry and alleviates any pressure of sharing a team bike. Though interest in this event is very high, we will be limiting this class to ten entries per event.”

Racing is expensive. The N2 National Endurance Series has partnered with some amazing sponsors to provide a substantial purse, contingency program, and bonus structure. Companies like Dunlop Motorcycle Tires, N2 Track Days, and Yamaha Motor USA have contributed substantial resources to provide a cash purse of over $115,000 for the five-round series. The result is one of the best purse structures for club racing in decades.

Tentative per race purse payouts (subject to increase with additional sponsorship) are as follows:

Heavyweight, Middleweight, Lightweight 4-hour Endurance Per Class Purse:

1st – $2500

2nd – $1500

3rd  – $750

4th  – $500

5th  – $250

6th  – $150

7th  – $100

 

Ultralightweight Endurance 2-Hour Class Purse:

1st – $1500

2nd – $750

3rd  – $500

4th  – $250

5th  – $150

6th  – $100

7th  – $50

 

Road Race Relay Class Purse:

1st – $750

2nd – $500

3rd  – $250

4th – $150

5th  – $100

 

In addition to cash purse opportunities, there are currently over $40,000 in bonuses and product available from companies like Arai, Yamaha Motor USA, Innovative Motorsports, REB Graphics, Woodcraft Technologies, Rise Moto, and Ghetto Customs.

“We will have several exciting announcements coming soon concerning additional partnerships for contingency and bonce programs” said N2 Business Development Manager Chip Spalding. “There will be lots of opportunity for teams to win some substantial rewards for participating in the N2/WERA Endurance this year including a new 2022 Yamaha Motorcycle for one of the class champions. We have new partners joining every week and we will be releasing program specifics soon.”

For more information on the N2 National Endurance Series by Dunlop as well as specifics on rules, classes, sponsors, contingency, and purse, please go to https://www.n2td.org/endurance/ . If you are interested in becoming involved as a sponsor, please contact Chip Spalding at [email protected]

About N2 Track Days:

N2 provides a structured riding environment for sport-bike riders of all levels promoting motorcycle safety through instruction on a closed course racetrack. Our instructors and coaching staff are comprised of club-racers, pro racers, and experienced track day riders who are articulate and passionate about all aspects of this sport. N2 strives to provide an enjoyable riding experience in an environment where members can hone their skills and inspire confidence in their riding ability. Riding with N2 means you and your sportbike gain access to a structured environment without the hazards, limitations, distractions, and obstacles that you’ll find on the street.

The N2 National Endurance Series is proudly sponsored by:

N2 Track Days, Dunlop Motorcycle Tires, Yamaha Motor USA, WERA Road Racing, Arai Helmets America, Innovative Motorsports, R.E.B Graphics, Woodcraft, Rise Moto, and Ghetto Customs.

Harley-Davidson Launches Pan America 1250 Demo Tour

The 2021 Harley-Davidson Pan America 1250 Special can be fitted with Adaptive Ride Height. Photo courtesy Harley-Davidson.
A 2021 Harley-Davidson Pan America 1250 Special. Photo courtesy Harley-Davidson.

HARLEY-DAVIDSON KICKS OFF PAN AMERICA ADVENTURE MOTORCYCLE DEMO TOUR

MILWAUKEE (March 23, 2021) – Harley-Davidson recently unleashed its bold take on adventure touring with the all-new Pan America™ 1250 and Pan America™ 1250 Special motorcycles. The spirt of adventure touring is one of endless possibilities and unrestrained freedom. From its inception more than a century ago, when many roads were little more than dirt trails, Harley-Davidson has stood for adventure. Riders will soon be able to experience that freedom first-hand as Harley-Davidson is proud to announce the Harley-Davidson Pan America Motorcycle Demo Tour. The tour kicks off in April, and signups for H-D-hosted demos are now available here: PAN AMERICA DEMO REGISTRATION. Demo opportunities at other major adventure touring, overland events and rallies, signups will happen on location.

“I’ve had the opportunity to ride a Pan America motorcycle both on and off-road, and can’t wait for riders to experience the innovations and capabilities that our team has built into this fantastic adventure touring bike,” said Jochen Zeitz, chairman, president and CEO of Harley-Davidson. “Now riders can experience for themselves the first motorcycle of its kind to be designed and developed from the ground up in America.”

The Pan America motorcycle introduces a revolution in technology, performance and accessibility with innovative Adaptive Ride Height and the all-new Revolution Max 1250 engine. Adaptive Ride Height is an industry-first motorcycle suspension system available on the Pan America 1250 Special that automatically transitions between a riding position when stopped, to an optimal ride height when the motorcycle is in motion. The lowered suspension at rest makes the motorcycle easier to mount and dismount, without sacrificing lean angles or ground clearance.

The Revolution Max 1250 engine is an all-new, clean sheet design, developed by the Harley-Davidson design and engineering teams. It is a 150hp, liquid-cooled 1,250cc-displacement V-Twin, the latest in the legendary powertrain lineage of the Harley-Davidson Motor Company. To minimize overall motorcycle weight (Pan America 1250 534lb. wet/Pan America 1250 Special 559lb. wet), the Revolution Max engine is integrated into the vehicle as the central member of the chassis. The Revolution Max 1250 is designed to offer smooth, low-end torque delivery and low speed throttle control that is optimized for off-road riding.

The Harley-Davidson Pan America Motorcycle Demo Tour will include stops at adventure touring and overland events and rallies as well as H-D-hosted demo experiences at locations that allow for riders to experience the capabilities of the Pan America™ on and off-road. The Demo Tour starts off in Texas on April 16, 2021.

CURRENTLY SCHEDULED* HARLEY-DAVIDSON PAN AMERICA MOTORCYCLE DEMO TOUR EVENTS: 

4/16-4/18, H-D-Hosted Demo, Dallas, TX

4/23-4/25, H-D-Hosted Demo, Albuquerque, NM

4/30 – 5/2, H-D-Hosted Demo, Phoenix, AZ

5/7 – 5/9, H-D-Hosted Demo, Las Vegas, NV

5/14 – 5/16, H-D-Hosted Demo, San Jose, CA

5/21 – 5/23, H-D-Hosted Demo, Lake Elsinore, CA

5/28 – 5/30, H-D-Hosted Demo, Sacramento, CA

6/4 – 6/6, Giant Loop Ride, Lawen, OR

6/12 – 6/20, Laconia Motorcycle Week, NH

6/25 – 6/27, Outside Adventure Expo, Salt Lake City, UT

7/9 – 7/11, H-D-Hosted Demo, Twin Falls, ID

7/15 – 7/18, Get On! ADV Fest, South Dakota

7/30 – 8/1, H-D-Hosted Demo, St. Louis, MO

8/6 – 8/8, H-D-Hosted Demo, Harrisburg, PA

8/13 – 8/15, H-D-Hosted Demo, Pittsfield, MA

8/18 – 8/22, Touratech DirtDaze, North Haverhell, NH

8/27 – 8/29, Overland Expo Mountain West, Loveland, CO

9/3 – 9/5, XLADV: High Sierras, Mammoth Lakes, CA

9/10 – 9/12, H-D-Hosted Demo, Salt Lake City, UT

9/16 – 9/19, Touratech Rally, Plain, WA

9/24 – 9/26, Overland Expo West, Flagstaff, AZ

10/ 8 – 10/10, Overland Expo East, Arrington, VA

10/22 – 10/24, H-D-Hosted Demo, Stamford, CT

10/29 – 10/31, H-D-Hosted Demo, Loudon, NH

11/6 – 11/7, Howling At The Moon, Prescott, AZ

*Locations subject to change or cancelation, check the PAN AMERICA DEMO REGISTRATION link for the most up to date information.

World Superbike: Aruba.it Racing Ducati Team Presented

Michael Ruben Rinaldi (left) and Scott Redding (right). Photo courtesy Aruba.it Racing Ducati.
Michael Ruben Rinaldi (left) and Scott Redding (right). Photo courtesy Aruba.it Racing Ducati.

The Aruba.it Racing – Ducati Team launch their 2021 WorldSBK season

The 2021 World Superbike season of the Aruba.it Racing – Ducati Team has officially kicked off today with the presentation of the two Ducati Panigale V4 R machines of Scott Redding and Michael Ruben Rinaldi.

The British rider is in his second season with the Aruba.it Racing – Ducati team after fighting for the World Championship Title until the final round in 2020. For Rinaldi, fresh from an excellent season in which he scored his first WorldSBK victory at Motorland Aragón, this can be considered as a comeback after winning with the Aruba Junior Team the 2017 Superstock 1000 Championship Title.

The whole team was the protagonist of an intense video that traced the bikes’ assembly phases before exiting the pit lane for an ideal grid alignment. On them, the original signatures of Stefano Cecconi (CEO Aruba S.p.A. and Team Principal Aruba.it Racing – Ducati), Claudio Domenicali (CEO of Ducati Motor Holding), Luigi Dall’Igna (General Manager of Ducati Corse), Paolo Ciabatti (Ducati Corse Sporting Director) and Daniele Casolari (Team Owner Feel Racing) stood out.

The video was filmed at Misano World Circuit, which will host the second round of the 2021 WorldSBK Championship, in mid-June, after the season opener at Aragón at the end of May.
The event was streamed on Ducati and Aruba.it Racing – Ducati social media, broadcasted and distributed by WorldSBK to the main Italian and international sports media.

 

Stefano Cecconi (CEO Aruba S.p.A. and Team Principal Aruba.it Racing – Ducati)

“Since 2015, we have officially represented Ducati in the Superbike World Championship, and our results have grown steadily to the second and third place obtained with Scott and Chaz last season. Our goal is to take that final step forward to reach the target we have set ourselves since the beginning of this adventure. After last year’s surprising debut, in 2021, we expect Redding to bring out his full potential. On the other hand, Rinaldi has had a long journey, including winning the Superstock 1000 title. It is a great satisfaction for us to see him in the factory team, and in light of his extremely convincing season with a private team in 2020, we hope he can do even better this year. I want to wish the team and the riders the best of luck for this season which, given the moment we’re experiencing, won’t be easy from a logistical point of view. Finally, my thoughts go out to all the fans: in the first few races, they probably won’t be able to be with us at the track, and we will certainly miss them. However, we’re sure that they will follow us from home, giving us all the warmth and affection that they have always given us over the years”.

 

Claudio Domenicali (CEO of Ducati Motor Holding)

“Ducati has been participating in the Superbike World Championship since its creation in 1988, and excitement is always high at the start of a new season. The Panigale V4 R is absolutely one of the closest road bikes to a real racing bike, and the fact that such a high-performance product is available to all enthusiasts makes us very proud. There is a strong union with Aruba.it, our long-standing partner, and a very important technological collaboration that starts on track and expands into the corporate digital and IT processes. With this in mind and supported by the talent of our riders Scott Redding and Michael Rinaldi, who are true ambassadors of our brand, we look forward to the start of the 2021 season with optimism”.

 

Luigi Dall’Igna (General Manager of Ducati Corse)

“The 2020 season has been exciting, and to see both of our riders fighting for top positions is a source of great satisfaction and pride for all of Ducati Corse. This year, with Scott and Michael, I’m sure we’ll be very competitive and that we’ll be able to take another step forward and further improve our bikes’ performance. I’m asking the team to give it their all, as always, and I believe that together we can achieve extraordinary results”.

 

Scott Redding (Aruba.it Racing – Ducati Rider #45)

“Last season was very exciting for me. The great support I received from Ducati and the extraordinary bond with the Aruba.it team were very important and gave me a deep desire to be competitive and win again. For this reason, I’ll give my best to make that step that we missed in 2020. I’m convinced I can do well because last season, I had the opportunity to gain a lot of experience with the Panigale V4 R, know new circuits, and understand the format of an exciting competition like WorldSBK. This will allow me to start on an equal footing with my competitors in 2021. I want to thank all the guys in the team who work hard every day. To the fans, I can say that I will try to entertain them on track to celebrate together at the end”.

 

Michael Ruben Rinaldi (Aruba.it Racing – Ducati Rider #21)

“In 2020, I got my first WorldSBK win, and it will always be a beautiful memory. However, the goals are higher now, and I will work hard to achieve great results with the Aruba.it Racing – Ducati team. After winning the Superstock 1000 Title with the Aruba Junior team, now it’s like coming home to my family. Wearing these colors is a great honor, and that makes me very proud, as I think it makes all the guys in the team proud because it means that the path we have taken has been positive. Joining the factory team also means having all the support from Ducati, the guys on the track and everyone who works at Borgo Panigale. I want to tell my team that I’ll do everything I can to make sure they have fun during the 2021 season, while I want like to ask the fans to continue to support us even if there will be some difficult moments because thanks to their warmth, we’ll be able to overcome them in a big way”.

AHRMA: Orloff Wins Vintage Cup Races At Carolina Motorsports Park

Wes Orloff (74) on his 1967 Honda 450. Photo by etechphoto.com, courtesy AHRMA.
AHRMA racer Wes Orloff (74) on his 1967 Honda 450. Photo by etechphoto.com, courtesy AHRMA.

Kershaw, SC., March 23, 2021 – Heated battles took the chill off rounds 3 and 4 of the American Historic Racing Motorcycle Association’s (AHRMA) 2021 Vintage Cup during the March 20-21 weekend at Carolina Motorsports Park.

500 Premier, which features iconic racing motorcycles from the 1960s, is the road racing class AHRMA is highlighting during 2021. Special awards and coverage are being provided by class sponsors Roadracing World (roadracingworld.com) and NYC Norton (nycnorton.com).

The class included Wes Orloff, from Milwaukee, Wisconsin, aboard Dale Coffman’s Honda 450, and Helmi Niederer on his NYC Norton Seeley G50, first time back on the track after recovering from a broken shoulder at Barber 2019.  Tony Reed was on his fast BSA B50 along with other BSA racers Andy Findling, Chuck Crocco, and David Rutherford.  Dave Roper joined the grid on the historic Dick Mann Special AJS 7R.  Rounding out the grid was Jerry Duke on his Ducati 350 Scrambler.

Saturday’s race was held in the early afternoon with weather conditions vacillating between Winter and Spring.  There was optimism in the paddock that the racing surface temperature would be warm enough to provide the tire grip needed in close vintage motorcycle competition.

Orloff took the holeshot on Saturday’s race which allowed him to avoid traffic in the first corner.  Neiderer lost the front end in the melee which also took out Vintage Cup points leader Reed’s rear wheel, taking him out of contention to earn Vintage Cup points in the race.  When the race was restarted, Orloff took another holeshot and a flag-to-flag victory.

Warmer weather and higher track temperatures offered better conditions for Sunday’s race. All of the bikes damaged during Saturday’s fracas had been repaired and the racers ready for a rematch.

At the start, Tony Read experienced mechanical issues and was unable to launch his BSA.  In a repeat of Saturday, Orloff got a strong start which he leveraged into a sizable lead.  Roper followed with Niederer in third for the duration of the race. Duke and Rutherford rounded out the top five with Findling and Crocco on their well turned-out BSAs also in the mix.

“Wes Orloff is one of the most congenial, gentlemanly fast guys out there and it’s always good for him to take a win, and he took two this weekend,” said Kenny Cummings of NYC Norton, sponsor of the 2021 Vintage Cup. Cummings continued, “At the same time, the Cinderella story of Tony Read is something we expect will continue in future races.  CMP brought him some bad luck this last weekend, but he’ll be back. The Vintage Cup is now equal points between Reed and Orloff with 2000 points each.  We know there is more excitement to come.”

Rounds 5 and 6 will be at Streets of Willow in Rosamond, CA, April 16-18, 2021.

 

Race Results (Saturday, March 20):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 AJS 7R

3 – Jerry Duke, 1967 Ducati 350 Scrambler

4 – David Rutherford, 1971 BSA B50

5 – Andy Findling, 1961 BSA Gold Star

6 – Chuck Crocco, 1971 BSA B50

 

Race Results (Sunday, March 21):

1 – Wes Orloff, 1967 Honda 450

2 – David Roper, 1967 Harley-Davidson CRTT

3 – Helmut Niederer, Seeley G50

4 – Jerry Duke, 1967 Ducati 350 Scrambler

5 – David Rutherford, 1971 BSA B50

6 – Andy Findling, 1961 BSA Gold Star

7 – Chuck Crocco, 1971 BSA B50

 

AHRMA (American Historic Racing Motorcycle Association) is a not-for-profit organization dedicated to preserving, restoring, and competing on historic motorcycles. With more than 3,000 members, AHRMA is the leading historic motorcycle racing group in North America and one of the largest in the world. The association’s enthusiastic membership reflects this country’s strong interest in classic bikes.

MotoGP: 2021 World Championship Kicks Off This Weekend In Qatar

Losail International Circuit. Photo courtesy of Dorna.
Lusail International Circuit. Photo courtesy of Dorna.

Lights, camera… RACE WEEK! MotoGP™ revs back into life

After a long winter break and five days of official testing, the time has finally come to suit and boot up for racing. Are you ready?

Tuesday, 23 March 2021

First we saw the liveries, then we saw the class of 2021 head out for testing. Now, at the floodlit oasis of Losail International Circuit, it’s time to get suited and booted for another season of stunning competition. Rarely is anything predictable in this era of MotoGP™, but there is at least one certainty everyone can agree on: we’re most definitely ready to go racing. Are you?

This season, the headlines are overflowing before a lap has even been ticked off in anger. A new reigning Champion begins the year on the throne, Joan Mir (Team Suzuki Ecstar), and the world waits with bated breath to find out when we will get to see the return of eight-time World Champion Marc Marquez (Repsol Honda Team), although we know it won’t be to race in Qatar. Rider and team musical chairs leaves us with a different grid and new colours for many, as well as a few new faces as we welcome four rookies. But it’s the same incredible level of competition: thousandths are the new hundredths in MotoGP™.

And so we arrive into Round 1. Doha hosts the first and second Grands Prix of the season and Losail also opened its doors for all the official winter test days this year, so we’re not heading in blind but we are heading in primed. Jack Miller (Ducati Lenovo Team) arrives with the biggest target on his back, flanked by a flotilla of Yamahas as the testing timesheets saw the Aussie and his teammate Francesco Bagnaia bookend a top five reigned by Ducati and Yamaha. But there’s more to racing than one-lap speed…

Miller will definitely be one to watch as the lights go out, however, as will Bagnaia. Both are full factory this season and the pressure is certainly greater, but so too are the performances we’ve seen so far. Losail has also seen the Borgo Panigale factory enjoy some serious success of late, and the stage is set for the Bologna bullets to start the season where they’ll wish to go on: the front. That’s not forgetting the likes of Johann Zarco either as the Frenchman moves to Pramac Racing and enjoys ever more experience with the Italian machine, also proving his mettle in testing. The holeshot heroes have some serious top speed and three experienced riders who look ready, on paper, to get straight in the mix.

The timesheets in testing were far from a one-trick pony though. Three Yamahas ended the test within less than a tenth and a half of Miller at the top: Maverick Viñales (Monster Energy Yamaha MotoGP), Fabio Quartararo (Monster Energy Yamaha MotoGP) and last year’s Championship runner up Franco Morbidelli (Petronas Yamaha SRT). Viñales starts the year settled in, Morbidelli likewise. Quartararo switches to the factory Yamaha squad, but seems to have immediately found his footing. So too has nine-time World Champion Valentino Rossi at Petronas Yamaha SRT as the legendary Italian – never one to push for a stunner in testing but still near the top ten – was full of enthusiasm after the five days on track that prefaced the season. After a 2020 of highs and lows for the Iwata marque, and Ducati to an extent, are the two factories who took testing by the horns the two who arrive into the first Grand Prix ready to do the same in race trim?

Just behind them, sixth in testing saw Aprilia come to the fore. Aleix Espargaro (Aprilia Racing Team Gresini) put the Noale factory’s nearly all-new bike right up there every time he went out on track, and increasing expectation has so far been backed up by ever-increasing pace. What can the number 41 do once the lights go out? With teammate Lorenzo Savadori coming back from injury and also a rookie, Espargaro is the man in the spotlight for the new bike as racing gets underway in earnest. We’ve seen flashes of brilliance, but the 2021 aim for Aprilia will be to sustain that.

And then there’s Suzuki. Seventh and eighth was where reigning Champion Joan Mir and Suzuki Ecstar teammate Alex Rins ended the Qatar Test, and the feedback was positive. Consistently fast and consistently threatening in 2020, nothing in testing said Suzuki won’t be out the blocks to defend both the riders title and the teams’ Championship. The Hamamatsu factory’s Achilles heel – if such a thing exists in a season of such success – was qualifying last season, so that may be the first thing to keep a keen eye on as Saturday arrives. It seems though that nothing big to report may translate into “yes, we very much require the Jaws music once the lights go out for racing”… with test rider Sylvain Guintoli already having been working on their 2022 engine during the Qatar Test. If that’s not a mark of feeling everything is under control…

As race weekend arrives, meanwhile, we will be left waiting for the answer to one of the biggest questions: when will Marc Marquez return? Sidelined by injury after Jerez last year, it’s been a long, long road of surgery and recovery for the eight-time World Champion but the signs are looking good. Recently on track on a Honda RC213V-S in Catalunya and Portimão and looking ever more ready to race, there was certainly more than enough to make a good few rumours. His return won’t be in Qatar, however, so the foreboding music for his rivals remains on low for now.

On the other side of the Repsol Honda Team garage there’s plenty to talk about too though. Pol Espargaro joins the fold and, after an impressive trajectory over the past couple of seasons, began 2021 with an equally impressively quick adaptation to the Honda. Fast and fast often, the Spaniard was tenth overall in testing and could be a dark horse for much further forward as the race weekend begins, with each session of track time only giving him more experience of his new bike and team. Premier class podium finisher? Check. Race winner is the next goal.

LCR Honda Idemitsu’s Takaaki Nakagami will be hoping to move forward too after a slightly more muted test, as both he and new teammate Alex Marquez (LCR Honda Castrol) suffered a few crashes – the latter also injuring his foot but ready to head back out for Round 1. Both fought for podiums last year and Alex Marquez successfully, as a rookie no less, so they’ll want to move back up the field to where they’d left off last season.

That’s also true of KTM. The Austrian factory ripped up the history books and wrote a few replacements in 2020, with Brad Binder (Red Bull KTM Factory Racing) winning them their first MotoGP™ race – and his, as a rookie and the first premier class winner from South Africa – and new teammate Miguel Oliveira then adding two more MotoGP™ victories for KTM as well as becoming the first Portuguese premier class winner. Oliveira, now alongside Binder in the Red Bull KTM Factory Racing team, was the fastest Austrian machine in testing, but the two were side by side in P16 and P17. They’ll want more once the lights go out as KTM look to continue their roll of incredible success, but we’ve said it before and we’ll say it again: testing is testing. Friday practice, qualifying and then finally the first race of the year are often a wiser litmus test.

Iker Lecuona (Tech3 KTM Factory Racing) will be looking for more this year too as he starts his second season, needing to move up from where he ended testing, and new arrival Danilo Petrucci (Tech3 KTM Factory Racing) will be interesting to watch too as he adapts to his new bike.

Speaking of adaptation, there’s also plenty to keep an eye out for as the Moto2™ graduates begin their first seasons, eager to get in the mix. Savadori is a rookie but with a few events under his belt by now, whereas the trio of rookies moving up from the intermediate class tasted MotoGP™ for the very first time in the Qatar Test. The fastest of the three was Jorge Martin (Pramac Racing) in 14th, but it was incredibly close as reigning Moto2™ World Champion Enea Bastianini (Avintia Esponsorama) was just 0.022 further back. Luca Marini (Sky VR46 Avintia) was a little more in arrears but also impressed, and just like those adapting from one factory to another… every session is just another chance to improve.

The stage is set, the floodlights are primed and the grid is ready to start another rollercoaster season of incredible racing with the Barwa Grand Prix of Qatar. Don’t miss it, with lights out for the first MotoGP™ race of 2021 at 20:00 (GMT +3). Let’s GO!

MotoGP™ Qatar Test top five:

1 Jack Miller – Ducati Lenovo Team – Ducati – 1:53.183

2 Maverick Viñales – Monster Energy Yamaha MotoGP – Yamaha – +0.061

3 Fabio Quartararo – Monster Energy Yamaha MotoGP – Yamaha – +0.080

4 Franco Morbidelli* – Petronas Yamaha SRT – Yamaha – +0.140

5 Francesco Bagnaia – Ducati Lenovo Team – Ducati – +0.261

*Independent Team rider
 

 

Too close to call? Moto2™ gears up for 2021

Lowes, Bezzecchi and Gardner headline an all-star cast in the intermediate class

If testing taught us anything ahead of the Barwa Grand Prix of Qatar, it’s that Moto2™ is almost too close to call. Day 2 saw six riders within 0.089, and on Day 3 the top three were split by just half a tenth – giving a whole host of names the right to call themselves contenders. So let’s take a look at a few, but by no means all.

The fastest man in Qatar so far in 2021 is Sam Lowes (Elf Marc VDS Racing Team). The 2020 title challenger looks ready to pick up where he left off and you could likely call him the favourite. By far the most experienced of the quickest riders in testing, Lowes is in good shape for an assault on the crown and in a better position than this time last year when he missed the Qatar GP due to injury – and then he still took the fight all the way down to the wire…

Marco Bezzecchi (Sky Racing Team VR46), meanwhile, lurks just thousandths further back. The Italian also fought for the crown for much of the latter half of last season and became a Moto2™ race winner before a few mistakes derailed his final challenge. But mistakes can be a useful thing to a rider on a mission, because they teach lessons – and Bezzecchi has certainly proven himself a fast learner and a fast rider.

The same could be said of Remy Gardner (Red Bull KTM Ajo). The Australian has shown flashes of blazing pace and talent but sometimes peppered with mistakes or simple bad luck – including some serious injury struggles. Going into 2021, however, he’s with one of the most successful teams in the class and turned some good 2020 momentum into even more in pre-season testing. One of the quickest and most consistent in Doha so far, is this the moment it all starts to come together for Gardner? One thing’s for sure: the Aussie will push as hard as possible trying to make sure it does.

So who else looks threatening? Aron Canet (Inde Aspar Team) was a big presence on the timesheets on Friday and Saturday in testing and seems like he’s made another step forward to build on an impressive rookie season. Xavi Vierge (Petronas Sprinta Racing) had some serious speed too, and his teammate Jake Dixon – despite having been told his injury woes could even threaten his career – was another who seemed to have unlocked something even more as we begin 2021. Bo Bendsneyder (Pertamina Mandalika SAG Team) also seemed to have made a step forward. Now on a Kalex and with more experience under his belt, the Dutchman impressed in the test and could be one to watch. And what about Joe Roberts? The American moves to Italtrans Racing Team for 2021 and, after a stunner in Qatar last year, will want to start his new chapter in similar form.

It wouldn’t be a new year without some fresh faces either. Raul Fernandez (Red Bull KTM Ajo) flew the rookie flag the highest in the test as he immediately looked like a seasoned campaigner. Easily in the top ten and fastest rookie throughout, just that bit more – that he’ll be focused on finding in practice – could see him really start to challenge the more established names ahead of him too. Reigning Moto3™ World Champion Albert Arenas (Inde Aspar Team) moved up into the top ten on Day 3 too, and his old lightweight class sparring partners weren’t so far behind as Tony Arbolino (Liqui Moly Intact GP) and Ai Ogura (Idemitsu Honda Team Asia) also look to be settling in well. American Cameron Beaubier (American Racing) made solid progress too as he adjusts not from Moto3™ but MotoAmerica… and his rate of knots moving up the timesheets day by day was testament to progress. Who will strike first in the battle of the rookies, and will they take any veteran scalps along the way?

We’ll find out soon enough as the first battle – and the first Championship leader – is decided in the Barwa Grand Prix of Qatar. Moto2™ saddle up at 18:20 local time (GMT +3), with the first 25 points – and bragging rights – up for grabs.

Moto2™ Qatar Test top five:

1 Sam Lowes – Elf Marc VDS Racing Team – Kalex – 1:58.655

2 Marco Bezzecchi – Sky Racing Team VR46 – Kalex – +0.013

3 Remy Gardner – Red Bull KTM Ajo – Kalex – +0.048

4 Xavi Vierge – Petronas Sprinta Racing – Kalex – +0.177

5 Jake Dixon – Petronas Sprinta Racing – Kalex – +0.182

 

 

Veterans vs rookies: Moto3™ gets ready to rumble

Masia, Foggia, McPhee, Binder, Rodrigo; the veterans were up there in testing. But then there are the rookies…

What’s the perfect way to end the last day of testing? Probably something like Jaume Masia’s (Red Bull KTM Ajo) new – although unofficial – lap record. The Spaniard seems pretty settled in at Red Bull KTM Ajo already, and his warning shot will likely be heard by his rivals. But then, so too will that of new teammate Pedro Acosta. So is this season going to begin a clash of the rookies and veterans?

Masia’s lap was certainly a stunner, but we already know that Moto3™ is rarely a runaway game at the front and the likes of Dennis Foggia (Leopard Racing), John McPhee (Petronas Sprinta Racing), his new teammate Darryn Binder – adapting well to the Honda – and Gabriel Rodrigo (Indonesian Racing Gresini Moto3) won’t go down without a good few classic lightweight class battles. We also know that the rookies this year have hit the ground running in a way we’ve not seen for some time.

Acosta is one – the 2020 Red Bull MotoGP Rookies Cup winner second in testing behind only his teammate – and Izan Guevara (GasGas Gaviota Aspar Team) another as the reigning FIM Moto3™ Junior World Champion blazed out the blocks with some serious speed. What makes their performances all the more impressive is that they don’t know the track like they do some of the venues in Europe, and that’s something else to maybe make a few a little nervous later in the season. But for now, what is too much to ask? Wins? Podiums? They certainly have the speed, but the tactics will be a key test – as will holding their nerve.

That said, it’s been some time since this pedigree of CV has been on show. Both the FIM Moto3™JWCh and Rookies are known proving grounds and two of the most successful programmes on the Road to MotoGP™, but both Acosta and Guevara have even more in their track records. Acosta absolutely dominated the Rookies, which has been done before, but he also backed it up with race wins in the FIM CEV Repsol as he came third overall in the aforementioned FIM Moto3™ JWCh. Guevara, meanwhile, just can’t stop progressing. European Talent Cup winner in 2019, the Spaniard then moved to the FIM Moto3™ JWCh and by Jerez mid-season was almost unbeatable on his way to the crown. At Aragon, he won all three races – riders have done that before, a good match between man, machine and venue can create a little magic – only, after a nightmare qualifying, Guevara managed it three times in a row from outside the top 20 on the grid. Convinced yet?

Xavier Artigas (Leopard Racing), meanwhile, may not have been quite as near the front as his rookie compatriots, but he’s also already got a Grand Prix podium as he took to the rostrum on a wildcard in Valencia in 2019, too. On his first Grand Prix appearance. He ended the test in 11th, only just behind Darryn Binder, and shouldn’t be overlooked either after a season at the front in the FIM Moto3™ JWCh too – he’s the man who lost out on the crown to Guevara, losing a little momentum but after most definitely having done more than enough to impress regardless.

The timesheets gave us plenty to be excited about in testing. The lightning speed of the rookies and the aforementioned veterans alike, as well as riders like Romano Fenati (Sterilgarda Max Racing Team) and 2020 Rookie of the Year Jeremy Alcoba (Indonesian Racing Gresini Moto3) and their consistent pace. Who will take the first flag of the year in Moto3™? We’ll find out soon, after another 18 laps of wonderful lightweight class chaos.

Tune in for the Moto3™ race at the Barwa Grand Prix of Qatar at 17:00 (GMT +3) on Sunday the 28th of March.

Moto3™ Qatar Test top five:

1 Jaume Masia – Red Bull KTM Ajo – KTM – 2:04.263

2 Pedro Acosta – Red Bull KTM Ajo – KTM –  +0.306

3 Dennis Foggia – Leopard Racing – Honda – +0.440

4 Izan Guevara – GasGas Gaviota Aspar Team – GasGas – +0.455

5 Gabriel Rodrigo – Indonesian Racing Gresini Moto3 – Honda – +0.527

M4 ECSTAR Suzuki Names Supersport & Stock 1000 Riders

Sean Dylan Kelly (40). Photo courtesy Suzuki Motor of America, Inc.
Sean Dylan Kelly (40). Photo courtesy Suzuki Motor of America, Inc.

Suzuki Announces M4 ECSTAR Suzuki’s Supersport & Stock 1000 Riders for 2021

M4 ECSTAR Suzuki will field Sean Dylan Kelly and Sam Lochoff in the 2021
MotoAmerica Supersport Series, Wyatt Farris to compete in Stock 1000.

Brea, CA (March 23, 2021) – Suzuki Motor of America, Inc. announces the return of Team Hammer as its official road racing partner for the 2021 MotoAmerica AMA/FIM North American Road Racing Series. Team Hammer will field Supersport class riders using Suzuki GSX-R600s for 2021. The team returns to the 2021 MotoAmerica series as Team M4 ECSTAR Suzuki.

Riding for M4 ECSTAR Suzuki Supersport athletes include Sean Dylan Kelly and South Africa’s Sam Lochoff; who joins the team’s 600 class effort for 2021. Wyatt Farris joins M4 ECSTAR Suzuki competing in the Stock 1000 class on a GSX-R1000.

 

M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.
M4 ECSTAR Suzuki’s Sean Dylan Kelly (40) was a consistent podium finisher on a Suzuki GSX-R600. Photo courtesy Suzuki Motor of America, Inc.

 

Florida’s Sean Dylan Kelly returns to Team Hammer for a third year in 2021.  SDK finished second in the 2020 Supersport Championship, having scored consistent podium finishes along with five Supersport class victories in 2020. Kelly enters 2021 with an abundance of momentum gained from a dominating pole position performance and strong second place finish in the 79th running of the legendary Daytona 200 recently at Daytona International Speedway.

 

18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.
18-year-old Sam Lochoff moves up to Supersport for M4 ECSTAR Suzuki in 2021. Photo courtesy Suzuki Motor of America, Inc.

 

Newcomer Sam Lochoff turned heads by landing on the podium in his MotoAmerica debut in 2019, finishing third in the Junior Cup season-opener. Following an abbreviated rookie season in 2019, Lochoff made his presence felt in 2020, earning 13 podium finishes — including five runner-up finishes, en route to an overall third place ranking in the 2020 MotoAmerica Junior Cup Championship.

 

Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.
Experienced pro Wyatt Farris joins M4 ECSTAR Suzuki as its Stock 1000 rider. Photo courtesy Suzuki Motor of America, Inc.

Also new to M4 ECSTAR Suzuki is Wyatt Farris, joining as the team’s Stock 1000 rider for 2021.  Farris, from Calistoga, CA, is an experienced AMA Pro/MotoAmerica competitor, earning nine AMA Pro/MotoAmerica podium finishes, and taking third in the 2014 AMA Pro Supersport Championship. He finished a strong third in the 2016 Daytona 200. In 2017 he won the overall AFM Championship, was second in 2019, and topped the AFM overall points again in 2020.

In 2021, Team Hammer embarks on its 41st consecutive year of operating as an elite professional road racing team. In addition to an impressive list of accomplishments in various national and international motorcycle road racing championships, Team Hammer’s success at the AMA Pro and MotoAmerica National level is exceptional.

Team Hammer has earned an accumulated nine AMA Pro and MotoAmerica National titles while racking up 108 race victories and 291 podium finishes in multiple MotoAmerica Championship classes, AMA Formula Xtreme, AMA 750cc Supersport, and AMA Pro Daytona Sportbike series championships as well.

Along with an exceptional record of preparing, developing, and fielding championship-caliber equipment, Team Hammer is known for its consistent ability to identify and foster road racing athletes, whether they be up-and-coming riders, overlooked international competitors, or established veterans looking to reignite their careers with Team Hammer.

M4 ECSTAR Suzuki will debut its full team lineup on March 30-31 at the 2021 MotoAmerica Official Test at Circuit of the Americas in Austin, TX.

Phase Two Of Triumph Electric Motorcycle Development Completed

The styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

PROJECT TRIUMPH TE-1

CREATING UK ELECTRIC MOTORCYCLE CAPABILITY

PHASE 2 – POWERTRAIN PROTOTYPE

With the exciting reveal of the innovative advanced electric powertrain and battery and the first styling sketches for the final Project TE-1 Prototype, Phase 2 of this landmark four phase collaboration in British design and engineering reaches a successful conclusion.

Delivering on the objectives announced at the start of the TE-1 project in May 2019, focused on developing specialized electric motorcycle technology and innovative integrated solutions, this unique collaboration between Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd, and WMG at the University of Warwick funded by the Office for Zero Emission Vehicles, has already achieved significant results.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle showing the motorcycle plugged into a charging cable. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle showing a charging cable plugged into the bike. Image courtesy Triumph.

 

Including innovation in battery and powertrain design, initial test performance results far exceed the current benchmarks and industry targets. Developments in performance, efficiency, and range is enabling Project TE-1 to fully deliver the partnership’s objectives to enhance the credibility and profile of British industry providing substantial input into the future electric motorcycle strategy from Triumph.

 

  • Announcing the completion of Phase 2 – The reveal of the battery and powertrain prototype, initial high level performance results, and the first design concept drawings for the Project TE-1 Prototype motorcycle that will be created at the end of the next phase.

 

  • Key project achievements to date – Test results show significant innovation in mass, battery technology, and powertrain performance that exceeds the target set by the UK Automotive Council for 2025, meeting the project’s ambitious objectives to deliver genuine innovation for a new standard in fully usable electric motorcycle performance.

 

  • Project TE-1 is a unique collaboration between four major UK industry and academic leaders – Triumph Motorcycles, Williams Advanced Engineering, Integral Powertrain Ltd.’s
    e-Drive Division, and WMG at the University of Warwick

 

  • The objective of this two-year project is focused on developing electric motorcycle capabilities – It will provide an input into Triumph’s future electric motorcycle offer, drive innovation, capability and new intellectual property, and enhance the credibility and profile of British industry and design.

 

  • Project TE-1 is funded by the UK Government’s Office for Zero Emission Vehicles (OZEV), and delivered through Innovate UK

 

A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.
A Triumph TE-1 electric powertrain and battery pack mounted in a prototype frame with a 2021 Triumph Speed Triple 1200 RS in the background. Photo courtesy Triumph.

 

“The completion of Phase 2, and the promising results achieved to date, provide an exciting glimpse of the potential electric future and showcase the talent and innovation of this unique British collaboration. Without doubt the outcome of this project will play a significant part in our future efforts to meet our customer’s ambition and desire to reduce their environmental impact and for more sustainable transportation.” said Nick Bloor, Triumph CEO. “This important project will provide one of the foundations for our future electric motorcycle strategy, which is ultimately focused on delivering what riders want from their Triumph; the perfect balance of performance, handling, and real-world usability, with genuine Triumph character.”

 

PROJECT TE-1 – PHASE 2 OUTCOMES

Battery and powertrain prototype

Williams Advanced Engineering (WAE)

Based on the agreed specification, we identified appropriate cell technology and battery architecture to deliver the performance objectives. Using this as a framework, we then optimized the battery module layout to balance mass and positioning within the prototype chassis, taking into consideration center of gravity, space, and relationship with the powertrain and charging approach.

In addition to the module layout, we have also developed a new and unique vehicle control unit which is integrated into the battery pack to minimize weight and packaging. In parallel, WAE has also created innovative battery management software to ensure power is delivered in relationship to battery performance.

The outcome of Phase 2 for WAE includes a fully bench-tested battery with performance results that exceeds anything else on the market in terms of Power and Energy Density.

 

Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.
Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. Photo courtesy Triumph.

 

“We are delighted to be working on this project, working to deliver next-generation battery technology and control systems. Within the current landscape, most electric motorcycle technology arguably delivers compromised performance at low levels of battery charge. By using a lightweight, compact solution, we have been able to give the rider all of the performance all of the time (regardless of battery charge), and a class leading range. We have focused on pushing the boundaries to reduce mass and optimize frame position to benefit handling. We have also pushed the limits of battery performance, balancing the design for acceleration and range, with simulations modelled on track-based riding. In other words, as aggressive as possible,” said Dyrr Ardash, Senior Commercial Manager, Williams Advanced Engineering. “The energy density of this new battery will be a significant step forward from existing technology giving the rider more power, for longer. WAE has also designed and developed an electronic control unit from the ground-up, combining the battery management system with the bike control functions in one package. This is a first for this market, benefiting packaging and integration while optimizing performance and range.”

 

Integral Powertrain Ltd.’s e-Drive electric motor/invertor unit from the right side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit from the right side. Photo courtesy Triumph.

 

Integral Powertrain Ltd.’s e-Drive Division

Our experience in cutting edge motor and inverter design and manufacture has helped us to push this technology on to the next level for the TE-1 project. In Phase 1 we worked to integrate the normally separate motor and inverter into one single, compact package. Integration reduces the mass and volume of the drivetrain by reducing additional boxes on the vehicle, mounting features, coolant pipework, and heavy high voltage connections.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit and output shaft from the left side. Photo courtesy Triumph.

 

The innovative integration concept is also a fully scalable one, whereby the number of power stages can increase for larger diameter, higher torque motors for example. Combined with our state-of-the-art motor technology, we have seen very exciting results already, with the motor achieving a power density twice that of the target set by the UK Automotive Council for 2025.

 

Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.
Integral Powertrain Ltd.’s e-Drive electric motor/inverter unit as seen from the top rear. Photo courtesy Triumph.

 

We have also implemented advanced silicon carbide switch technology in the inverter. This reduces losses in the inverter and results in greater drivetrain efficiency, power delivery, and range. At the end of Phase 2, we are proud to have built a fully operational, new prototype motor that has been bench tested and is delivering on all aspects of performance.

 

Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.
Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. Photo courtesy Triumph.

 

“One of the most influential factors in how well a motorcycle handles and performs is mass, so at Integral Powertrain we have focused heavily on making a step change in motor and inverter design, removing heavy high voltage cables for example. This delivers a product that is significantly more compact and lighter than anything currently available on the market. The motor produces almost 180 horsepower (130kW), but weighs only 22 pounds (10 kg), much lighter than existing technology and clearly a small fraction of the mass of traditional internal combustion engines.” said Andrew Cross, Chief Technical Officer at Integral Powertrain Ltd. “The silicon carbide switch technology in our new scalable integrated inverter will help set new standards in terms of electric motorcycle efficiency; application of this technology means a lighter weight overall with significantly more performance and range. In parallel, we have a very strong focus on design for manufacture and assembly activity, so that all this high motor and inverter performance can be offered cost-effectively. Ultimately, this is really going to be an industry-leading powertrain that will help define the future of electric mobility. With the TE-1 project we are proud to be part of this landmark project for British industry.”

 

WMG, at the University of Warwick

At WMG we have been working closely with all the TE-1 partners during Phase 1 and 2 to develop representative models to simulate the systems of the bike including battery, motor, and vehicle control. Initially this allowed us to validate the specification against the intended component selection by assessing performance criteria such as range and top speed with initial models. This has enabled Triumph to carry out software development at an early stage prior to hardware being built with thorough testing programs to ensure that real-life testing can deliver on refinement. Most recently we have been conducting powertrain rig testing using the prototype IPT powertrain to ensure our simulations are accurate and to confirm that the motor functions within the system as intended. We have also been providing guidance to Triumph relating to future legislation, charging infrastructure and recycling strategies that will need to be implemented across future electric motorcycle platforms.

 

The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.
The Triumph TE-1 electric motorcycle powertrain and battery pack mounted in a prototype frame. Photo courtesy Triumph.

 

“Our creation of initial computer-based simulation models at the start of Phase 1 has been instrumental in ensuring that the component selection was appropriate to achieve the performance targets defined by the partners for the TE-1 Prototype. We have continued with this work across Phase 2 of the project, refining the models to a much more complex level to allow us and the partners to imitate further components on the bike such as braking, throttle, lighting and other systems and mimic real-world riding to provide development opportunities before components were fully designed. Additionally, we have created a physical rig wired with all the control units, to implement a design validation test program to ensure the function of each section was within the allowable range.” said Truong Quang Dinh, Assistant Professor of Energy Management and Control Systems at WMG, University of Warwick.

 

Triumph Motorcycles

Throughout Phase 2 Triumph have developed an all-new advanced vehicle control software which incorporates all the electrical systems to ensure intuitive throttle response, regen braking, traction control and all of the dimensions that a customer would expect from a high-performance Triumph motorcycle. Additionally, we have integrated leading functional safety strategies into this software, plus supported WMG in rig testing and have also fully developed the new prototype instrument display. Alongside this electrical and control system work, we have designed a brand-new prototype chassis including main frame and rear frame which have been optimized alongside the battery and motor packages which will be further evolved in Phase 3 into the TE-1 Prototype which will be used as a mule test platform in Phase 4. During this chassis development we have taken into account both the transmission design and the final styling of the TE-1 Prototype, the drawings of which we are pleased to reveal for the first time today.

 

Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.
Steve Sargent, Triumph’s Chief Product Officer. Photo courtesy Triumph.

 

Steve Sargent, Triumph’s Chief Product Officer said “The starting point for us in the TE-1 project was to gather important customer feedback about what riders really want from their motorcycles and understand how an electric motorcycle can provide the experience that riders desire. This includes considering the type of riding, range, feel and nature of power and torque delivery together with the ergonomics and bike controls. Taking all this feedback into consideration we began the chassis design, focusing on bringing everything together on the TE-1 Prototype in a way that provides a riding experience that is exciting and new, but ultimately familiar. We have begun to define the powertrain and battery interaction through the use of software refinement to deliver an exhilarating power delivery and throttle response, which provides great control and feels intuitive to the rider. Overall, with the styling we wanted to create something that is fresh and exciting but a natural evolution of the Triumph brand. Something desirable in its own right, with distinctive Triumph DNA and definitely not something that is different just for the sake of being different. Pulling all of this together with the partners we are thrilled to see the progress of such an exciting demonstration vehicle which incorporates the cutting-edge technology needed to guide the strategy for the future roadmap of electric motorcycles from Triumph. The team are proud to be leading such an innovative, strong and dynamic project with a fantastic group of partners which ultimately should set British engineering and design rightly at the forefront of future 2-wheel design.”

  

PROJECT TE-1 OVERVIEW

Project TE-1 collaboration – Triumph Motorcycles, industry experts, academic leaders, and UK Government

 Project Triumph TE-1 is a ground-breaking collaboration between Triumph Motorcycles and the UK’s electrification experts, each of whom is focused on creating innovations in their own areas:

 

  • Triumph Motorcycles is leading the project, providing advanced motorcycle chassis design and engineering expertise, manufacturing excellence and pioneering functional safety systems, as well as defining electric drivetrain power delivery characteristics.

 

  • Williams Advanced Engineering is providing industry-leading lightweight battery design and integration capability, using its test and development facilities to deliver an innovative battery management system combined with vehicle control unit.

 

  • Integral Powertrain Ltd.’s e-Drive Division is leading the development of bespoke power-dense electric motors and a silicon carbide inverter, integrating both into a singular motor housing.

 

  • WMG, at the University of Warwick is providing electrification expertise, and the critical vision to drive innovation from R&D to commercial impact, through modelling and simulation based on future market needs.

 

  • The Office for Zero Emission Vehicles (OZEV) is a team working across government to support the transition to zero emission vehicles, as well as funding to support chargepoint infrastructure across the UK. This will contribute to economic growth and will help reduce greenhouse gas emissions and air pollution on UK roads. OZEV is part of the Department for Transport and the Department for Business, Energy and Industrial Strategy.

 

  • Innovate UK is the government’s research and innovation agency that supports business led R&D funding and UK business growth.

 

A two-year project focused on developing technical innovation and advanced electric motorcycle capabilities

 The project is organized into four main phases, with one of its key aims being increased systems integration. By developing individual components of automotive-based electric drivetrains and optimizing them into innovative combined units, the project aims to deliver sophisticated electric motorcycle systems which reduce mass, complexity, and package requirements.

Triumph Motorcycles is working alongside the partner organizations to accelerate joint expertise in the packaging and safety of batteries, optimum electric motor sizing and packaging, the integration of braking systems including regenerative braking, and advanced safety systems. The innovation and capabilities developed in these areas will input into Triumph’s future electric motorcycle strategy.

The Project Triumph TE-1 partnership, with the support of the Office for Zero Emission Vehicles and Innovate UK, is focused on facilitating the creation of:

  • Electric motorcycle capability that meets the needs of customers seeking lower environmental impact transportation, delivering against the UK’s focus on reducing emissions
  • Strong, commercially viable, and sustainable partnerships with UK industry manufacturers
    and supply chains
  • Expertise and capability within the UK workforce, creating jobs and a talent base that both ensures sustainable employment and drives the UK’s reputation and influence on the world stage.

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Dr Francesca Iudicello CEng MIMechE – Program Manager – Automotive Zero Emission Vehicles – Innovate UK

“Innovate UK has worked in close partnership with the Office of Zero Emission Vehicles to deliver the integrated delivery program since 2013. This provides funding to ground-breaking innovation in the automotive sectors for zero emission vehicle technologies from proof of concept to vehicle demonstration.

The TE-1 project is a part of this program under the IDP15 competition and is aligned with the road to zero policy and marks an important milestone towards zero emission vehicles and the race to net zero.

We are proud to have delivered the funding for this project which is a pioneering project for the zero-emission vehicle motorcycle manufacturing in the UK as it has successfully developed, thanks to a very talented group of innovators, the very first Triumph electric motorcycle in a very quick development time and prepared the groundwork for the future of electric motorcycles.”

 

A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.
A styling sketch of the new Triumph Project TE-1 electric motorcycle. Image courtesy Triumph.

 

Jon Bray – Research & Development (R&D) Lead – Office for Zero Emission Vehicles

“Investment in Research and Development is key to our mission of putting the UK at the forefront of the design, manufacture, and use of zero emission vehicles. By supporting these technologies, we are helping to deliver our road transport decarbonization goals, while anchoring economic activity across the UK, which will support the green recovery in the wake of the pandemic.

This is why the Office for Zero Emission Vehicles continues to design and fund a series of R&D competitions, which support UK innovation in developing zero emission vehicle and charging infrastructure technologies.

Triumph’s TE-1 project is part of our diverse R&D portfolio of ambitious electrification projects, which are addressing challenges in line with our accelerated phase-out ambitions of petrol and diesel cars and vans and electric vehicle commitments in the Prime Minister’s Ten Point Plan.

We are excited to see that our funding is supporting Triumph Motorcycles in driving forward innovation and capability in the electric motorcycle space, while fostering collaboration between several pioneering UK companies”.

Melissa Paris Reviews Suzuki Katana Accessories, In The March Issue

The Suzuki Katana as it looked fitted with selected official Suzuki accessories. Photo by Bob Scholten.

Featured In the March 2021 issue of Roadracing World:   

     “We started by installing a slightly taller-than-stock version of what Suzuki calls a ‘meter visor,’ and it took just over five minutes. All the necessary hardware is included along with detailed instructions, which is pretty impressive considering the entire procedure is simply removing four bolts, swapping the visor, and reinstalling with four bolts.

      “The added wind protection will be nice for anyone who spends time on the highway while still retaining a clean, OE look…” 

—Product Evaluation: Suzuki Katana Accessories, by Melissa Paris.

 

            The Product Evaluation we did on official accessories for the Kawasaki Z900RS retro bike proved popular, so we’re now looking at official Suzuki accessories for the latest version of the Katana. We enlisted the help of experienced racer and race mechanic Melissa Paris. It’s all in the latest issue of Roadracing World!

 

Roadracing World & Motorcycle Technology is THE definitive source for motorcycle racing, riding, and tech information.

PREVIEW the March 2021 Issue of Roadracing World!

Roadracing World & Motorcycle Technology magazine is available in print and digital formats. SUBSCRIBE NOW . Or call (909) 654-4779, 9:00 a.m. – 5:00 p.m. Pacific Time, Monday through Friday. Read the March 2021 issue of Roadracing World & Motorcycle Technology with your online subscription. Log in HERE

Available at Cycle Gear and other motorcycle retailers.

Visit www.roadracingworld.com daily for breaking news and events.

Like us on Facebook https://www.facebook.com/roadracingworld

Follow us on Twitter: https://twitter.com @roadracingworld

Follow us on Instagram https://instagram.com @roadracing_world