The industry leading Dunlop Sportmax Q4. Bold look, bold performance for bold riders. A purpose-built track-day tire achieves lean angles up to 62 degrees! The Sportmax Q4 is DOT-approved for street-legal use. Go ahead and drag a knee!
Dunlop Sportmax Q4
Here’s the first thing you need to know about Dunlop’s Sportmax Q4®: This purpose-built track day tire achieves lean angles up to 62 degrees*, more than any other street-legal tire Dunlop has ever made.
Utilizing technology shared by Dunlop’s cutting-edge MotoAmerica road race tires, the Q4 is made in Dunlop’s Buffalo, New York, plant on the same proprietary equipment as the racing products. Only Dunlop makes sport tires in America.
The Q4 is not a replacement for Dunlop’s popular Q3+, but instead adds depth to the Sportmax family lineup to accommodate track-day-level riding like no other Dunlop DOT street tire has before.
The Sportmax Q4 is sold through all Dunlop retailers, as well as race distributors, so it’s easily accessible to all riders.
– New tread pattern with low groove density that puts down a massive footprint, especially during maximum lean angles.
– Street-friendly performance—does not require tire warmers,and minimizes the need for chassis adjustments.
– Designed in new sizes such as 180/60ZR17 and 200/55ZR17 to work on sport bikes with sophisticated electronics packages. These new sizes also offer a more aggressive profile option for track use for many sport bikes.
– The rear tire features Dunlop’s Jointless Tread (JLT) technology, the same process used in Dunlop’s racing slicks. JLT applies a continuously wound tread strip over the carcass to achieve the ideal stability, flex, and grip across the tire’s tread profile.
– Dunlop’s proprietary Carbon Fiber Technology (CFT) in the sidewalls for even greater stability.
– Dunlop’s proprietary Intuitive Response Profile (IRP) for ultra-linear and responsive steering.
Availability
The Sportmax Q4 is available now at your local dealer!.
*As tested by Dunlop on a 2017 Suzuki GSX-R1000R on a closed track at Barber Motorsports Park.
Bruno Silva took his Dunlop-shod Suzuki GSX-R600 to three tough wins during the 2021 FMRRA Round 5 at Homestead-Miami Speedway. Bruno was able to pull out the wins in the 12-lap Superstock 600 Grande Corsa and six-lap Superstock 600 Sprint race along with the Sunoco Superbike 600 Sprint race with only his brother Fernando Silva able to steal one win on his Dunlop Suzuki GSX-R600 in the Sunoco Superbike 600 Grande Corsa.
Armando Ferrer was able to take two wins on his Dunlop BMW S 1000 RR in the Sunoco Superbike Grande Corsa and Sprint race. Alex Arango also took two wins on his Pirelli BMW S 1000 RR in the Superstock 1000 Sprint race and the overall win the Euro Cup Sprint race.
In the amateur division, Julian Correa went undefeated with four wins on his Dunlop Moriwaki 250 in the Moto 3 Grande Corsa, Moto 3 Sprint, Production Twins Grande Corsa, and Production Twins Sprint races.
FMRRA would like to thank our sponsors for 2021 for their continued support of our passionate racers and the sport as a whole.
Sunoco Racing Fuels
Southern Racing Fuels
Palm Beach County Sports Commission
Bridgestone Tires
Dunlop Motorcycle Tires
Vanson Leathers
MYLAPS Sports Timing
Florida Track Days
FMRRA Returns to Palm Beach International Raceway for Round 6 on April 10-11.
For more racing information visit:
www.fmrra.com
Full Season Championship Results and Individual Race Results are conveniently available online at:
https://www.fmrra.com/championships/
or follow us on social media:
http://www.instagram.com/floridaroadracing
http://www.facebook.com/fmrra
Editorial Note: Use the zoom and scroll tools in the bottom left corner of the PDF viewer to better see all of the race results.
M4 ECSTAR Suzuki’s Bobby Fong stole the spotlight in dramatic fashion at the official MotoAmerica/Dunlop pre-season test at Circuit of The Americas (COTA).
Riding his GSX-R1000 with a soft race-compound rear Dunlop tire, Fong lapped the 3.4-mile, 20-turn road course in 2:08.343 – the fastest lap time of the two-day test and a time faster than Josh Herrin’s 2019 race lap record of 2:08.994.
“It wasn’t too crazy of a lap, but I did tuck the front so long and went so wide in Turn Seven and missed my apex by a long shot,” said Fong. “I thought my lap was done. I thought, ‘To hell with it. I’ll just finish the lap and see what lap time I get anyway.’ And it was still a 2:08.3! So, I’m confident it could have been a high 2:07, for sure. But it’s just a test, so it doesn’t matter, obviously. The main thing is we left the test on a positive note.”
If saving his best lap for last wasn’t dramatic enough, MotoAmerica added some drama by initially taking Fong’s lap time away.
On his pit-in lap from his next-to-last stint, Fong straight-lined COTA’s fast esses section, as many riders did on pit-in laps during the test. The call from the corner marshals reporting that Fong did this, however, didn’t reach race direction until several minutes later when Fong was in the process of doing his fastest flying lap. Race direction then ruled that Fong had cut the course and instructed timing and scoring to invalidate the lap.
When MotoAmerica initially took the lap time away, Fong insisted that he had not cut the course. Fong’s team questioned MotoAmerica’s decision, and after a short investigation–including timing and scoring questioning the decision–MotoAmerica race direction admitted that it was a mistake and reinstated Fong’s best lap.
Up until the last session it looked as if newcomer Loris Baz or 2020 MotoAmerica Superbike Championship runner-up Jake Gagne would come away with fast lap honors.
Baz and his Warhorse HSBK Racing Ducati New York Panigale V4 R were the class of the field on Day One, with the tall Frenchman doing a fastest lap time of 2:08.595.
Baz didn’t have as much success on Day Two, which included a small crash and a best lap time of only 2:09.127 in cooler and windier conditions. But the former MotoGP and World Superbike rider still left the test second-fastest overall and happy with the work he did.
Gagne led sessions six and seven on Day Two even though he and his new crew focused on continuing their baseline setup work on his Fresh N’ Lean Attack Performance Yamaha YZF-R1 as opposed to seeking a single fast lap. Gagne never tried a soft-compound tire during the two days but still got down to a 2:08.902 while using a hard-compound rear Dunlop Wednesday, and that put him third overall at the test.
Mathew Scholtz mounted a soft-compound rear Dunlop to his Westby Racing Yamaha YZF-R1 at the end of the day Wednesday and tried to go for a fast lap time, but he said he messed up his quickest lap. Still, the South African finished with a best lap time of 2:08.957 (fourth-fastest overall), which he said was the quickest he’s gone at COTA “by far.”
Gagne’s teammate Josh Herrin said he was having a “terrible” test until the final minutes of the final session. That’s when his crew chief Richard Stanboli gambled on a big shock change to help Herrin get his Yamaha turned mid-corner. The change worked well, so Herrin mounted a new set of Dunlops and hustled around the track just in time to get in one fast flyer. That lap was a fifth-quickest 2:09.642 and Herrin said it felt like winning a race.
Fong’s teammate Cameron Petersen, the reigning MotoAmerica Stock 1000 Champion, had a positive debut on his new Suzuki Superbike. In spite of riding with an injury to his left foot that made downshifting difficult and doing long stints impossible due to the pain, Petersen was able to crack off a 2:09.751 at the end of Wednesday, ranking him sixth overall.
Seventh overall on the combined Superbike test times was Jayson Uribe, who did a 2:11.829 on his new Fly Racing/ADR Motorsports Suzuki GSX-R1000. Unfortunately, Uribe ended his test early with a fast crash Wednesday afternoon, but the Californian was relatively uninjured and was happy with the progress he made to that point.
Uribe’s teammate/team owner David Anthony was eighth in the combined times with a 2:13.154.
The fastest Stock 1000 rider was Jake Lewis, who did a 2:14.374 on his new Altus Motorsports Suzuki GSX-R1000.
Fong Ends MotoAmerica Dunlop Preseason Test On Top At COTA
Suzuki Rider Nails Down Fast Time In Final Session Of Two-Day Texan Test
AUSTIN, TX (March 31, 2021) – M4 ECSTAR Suzuki’s Bobby Fong ran through the gamut of emotions in the final session of the two-day Dunlop Preseason Test at the Circuit of the Americas on Wednesday – elation, disappointment and, ultimately, happiness.
Fong turned in the best lap of the test in the eighth and final session today, but the lap was initially taken away when it was reported that he had cut the track. The issue was resolved, however, when it was determined that Fong cut the track, but not on his fast lap. That meant that Fong leaves Texas with bragging rights as the fastest Superbike rider over the two days, his 2:08.343 bettering Loris Baz’s 2:08.595 from Tuesday’s final session.
“Hero to zero like that,” Fong said before knowing that his quick lap had been reinstated. “They said I cut the track, but I didn’t. I wouldn’t lie and I’d be honest here. We did a good test and it’s unfortunate not to see my name on top. The team has been doing a lot of hard work here and it’s unfortunate for the team because we wanted to be on top. But we will bring it to Atlanta and bring the heat. We haven’t tested at all and I haven’t been on a road race bike since October and have just been riding motocross a lot. Yesterday was kind of weird. We started off really strong and then we cracked a swingarm and had to go to a back-up one that we had to test anyway. It wasn’t working as well and we need to do more development with that, but with that being said they fixed the swingarm overnight and we got back to where we started, and we just started improving today. Overall, it was a really good test.”
Fresh N’ Lean Attack Performance Yamaha’s Jake Gagne ended the day as the second fastest of the Superbike men, the 2020 MotoAmerica Superbike Championship runner-up lapping at 2:08.902 in today’s third session.
“It was a great test, and we got a lot done,” Gagne said. “We worked through a lot of stuff, a lot of chassis stuff and electronics. Luckily the weather held out today. It was little windy, but actually pretty nice. We got a lot of laps in and just got to try stuff to see what works, what doesn’t work. My goal was working with my crew chief; we weren’t focused on lap times. I think a lot of the guys were using the softer tires and we stayed on the nine-sevens the whole time. We just wanted to work on things so I could get a feel for what the bike does when we do this or that. We really learned a lot. We didn’t want to throw down lap times we wanted to do what we could do to build a good race setup.”
Third fastest overall on Wednesday was Westby Racing’s Mathew Scholtz with his 2:08.957 with the South African doing his best in today’s third session.
Frenchman Loris Baz, who was making his MotoAmerica debut, slipped down the order today to fourth fastest, but his fast lap from yesterday put him just behind Fong after two days of testing on the Warhorse HSBK Racing Ducati New York Panigale V4 R. Baz also had his first MotoAmerica crash, a slow tip-over in turn one early in the final day.
“Definitely, the conditions were different than yesterday,” Baz said. “Really windy and the bike is pretty sensitive to the wind with the wings. But it was good to try the bike in completely different conditions than yesterday. I did a lot of long runs, honestly, and the only time I tried a softer tire was at the end and I didn’t use it well. We worked on making long runs on the race tire, like 10-lap runs. We did a good job, and I had a better feeling on the long run than yesterday. The lap times were a bit slower, but we did a good job.”
Gagne’s Fresh N’ Lean Attack Performance Yamaha teammate Josh Herrin ended the day fifth overall and just ahead of M4 ECSTAR Suzuki’s Cameron Petersen.
Fly Racing ADR Motorsports’ Jayson Uribe and David Anthony ended up seventh and eighth, though Uribe was fortunate to escape injury in a high-speed crash in the penultimate session today.
Altus Motorsports’ Jake Lewis and Thrashed Bike Racing’s Max Flinders rounded out the top 10 overall on Wednesday.
The battle for supremacy in the 2021 MotoAmerica Superbike Championship will kick off in earnest at Michelin Raceway Road Atlanta, April 30-May 2.
HONOS Kawasaki rider Richie Escalante’s defense of his 2020 Supersport Championship doesn’t begin until round one at Michelin Raceway Road Atlanta, but he made a convincing statement at the preseason test that he is clearly the favorite to take the title again in 2021. Escalante led all eight Supersport practice sessions aboard his 2020-spec machine, and he anticipates that his 2021 Kawasaki ZX-6R will be an even better bike than the one on which he won 13 races last year.
In SportbikeTrackGear.com Junior Cup, Landers Racing Kawasaki rider Ben Gloddy made good work of the two-day test as he was the quickest rider in all but the final practice session. He’d most likely have been a perfect eight for eight, but he suffered a minor tip-over during Practice 8 and, even though he was uninjured, he wasn’t able to record a lap time during the concluding session. In Twins Cup, Wrench Motorcycles Yamaha rider Ethan Cook went quickest overall.
More, from a press release issued by Westby Racing:
Westby Racing’s Mathew Scholtz Is Fourth-Quickest Superbike Rider At MotoAmerica Dunlop Official Preseason Test
Mathew Scholtz (11). Photo by Brian J. Nelson, courtesy Westby Racing.
Austin, TX – March 31, 2020 – Back to 100% fitness after being injured in a crash last year at Indianapolis Motor Speedway, Mathew Scholtz came into the Circuit of The Americas (COTA) for the MotoAmerica Dunlop Official Preseason Test looking lean, walking tall, and clearly showing he was ready to record some fast laps aboard his #11 Westby Racing Yamaha YZF-R1 Superbike.
Out of eight practice sessions held during the two-day test, Mathew emerged as the fourth-fastest overall rider, with a best lap of 2:08.957 occurring during the penultimate session.
About the test, Mathew said, “Ending up fourth overall was really positive for me. We improved in every single session. The team, all the hard work that they’ve done during the off-season certainly paid off. I couldn’t be happier. After such a terrible injury that ended my season early last year, to come here after having minimal track time, it feels great. COTA has never really been a good track for me. It doesn’t suit the Yamaha, and for some reason, I really struggle here. So, to be towards the front-end of the field at this track, I couldn’t be happier. It gives me a lot of confidence going into the first round.
“We made a few changes today. Some of them worked, some of them didn’t, but we know what to do in different situations if we do run into any challenges during the season. At this test, we set all of our quickest times on tires that we would be racing with. We really focused on that, on consistency, and on our race pace. One-lap speed wasn’t really something we were looking for, but it was really nice to be at the top end. Also, it was really nice to look at the trap speed and see that we were up there in that category, too, because that was something that we were struggling with last year, and it’s going to make things a heck of a lot easier for me.
“I’m just really thankful to be back in the MotoAmerica paddock, and I’m looking forward to starting the season at my home race. We’ll see how we fare.”
Next up for Westby Racing is round one of the 2021 MotoAmerica Championship, which takes place at Michelin Raceway Road Atlanta on April 30 through May 2.
For more Westby Racing updates, including news, photos, and videos, visit https://www.westbyracing.com
Also, visit “Westby Racing” on your favorite social media site.
More, from a press release issued by Wrench Motorsports:
Impressive debut with Wrench Motorsports for Ethan Cook at Circuit of the Americas
19 year old Ethan Cook kickstarted his 2021 MotoAmerica season with Wrench Motorsports in fine style this week, topping the Official MotoAmerica Twins Cup Test at the Circuit of the Americas.
Cook, who only inked the deal within the last couple of weeks, used the multiple COTA sessions to adjust to his new steed, impressing at the rate in which he improved at the home of the US Grand Prix.
Born and raised in San Diego, California, 19-year-old Ethan Cook started racing local motocross aged 9 where he quickly progressed, traveling the country to compete in amateur national competitions including the Lorreta Lynns Amateur National, the Freestone JS7 Amateur national, and the Mammoth Motocross series.
He made the move to tarmac in 2018 thanks to an opportunity from his mentor Bradley Ward. Initially riding a Kawasaki Ninja 400 with top 10 results racing the CVMA Race series at Chuckwalla and podium finishes at the WERA Race Series the next couple of years saw Ethan competing in various national disciplines of racing, taking in various club championships including WERA, AFM, CVMA races in the California State and in MotoAmerica’s Junior Cup class.
With the support and guidance from his mentors Bradley and Andrew Ward, and David Anthony, Ethan has also raced a Kawasaki ZX10R in Chuckwalla’s CVMA race series, taking to it like a duck to water, achieving podium finishes in the premier classes that the series has to offer.
For 2021 he will race for Wrench Motorsports in the MotoAmerica Twins Cup Class, the season commencing at Road Atlanta, Georgia, at the end of April.
Ethan Cook: “It was a wet and foggy start at COTA and my first time riding the Twins Cup bike. We made a lot of changes on the first day, really just trying to get me comfortable. It dried out by the afternoon and I was able to go faster almost immediately. We put some new tyres in for the final session and was able to go even quicker. The second day went really well. I improved by over three seconds on my time from Day 1. It was pretty wet first thing. I went out on slick tyres so didn’t really learn much. It dried up for the third session. We made some changes to the front forks and I felt really good. All in all, it’s been a good test. I am learning a lot and really getting on well with the team. They’re making me feel really welcome and I can’t wait to get the season started.”
For more information go to EthanCookRacing.com
Hayden Bicknese crashed his Altus Motorsports Kawasaki Ninja 400 in the final MotoAmerica SportbikeTrackGear.com Junior Cup test session, but not before he turned the fastest lap time in the session, a 2:31.859.
Ben Gloddy, the leader of six of the other Junior Cup test sessions, crashed his Landers Racing Kawasaki Ninja 400 without injury early in session eight and did not record any lap times. The 2:29.874 Gloddy did in session seven held up as the fastest lap time among the Junior Cup testers.
Editorial Note: The “Scheibe Test Rider” was Max Flinders, who rode the Scheibe Racing BMW S1000RR B bike to ensure it was functioning properly, according to team owner Steve Scheibe.
Five manufacturers in the top five, Rea fastest on day one of Barcelona test
Reigning Champion Jonathan Rea topped the times on day one as all manufacturers feature in the top five in Barcelona
It was left late to go top of the times in day one of the Supported Test at the Circuit de Barcelona-Catalunya on the first day of action for MOTUL FIM Superbike World Championship machines but, with around an hour left of the session, six-time Champion Jonathan Rea (Kawasaki Racing Team WorldSBK) stormed to the top of the timesheets to take day one honours.
It had been a quiet start for Rea as he found himself in the middle of the timesheets but slowly worked his way up the order, culminating with the Northern Irishman topping the day. Rea had spent the day confirming items on the chassis as well as front forks from Showa on his brand-new 2021 ZX-10RR, but posted a time of 1’40.793s to go fastest as he completed 68 laps, lapping almost one second faster than the 2020 Tissot Superpole fastest time, albeit on a revised layout.
Rea finished ahead of Leon Haslam (Team HRC) with the Honda rider trying new exhaust systems on his CBR1000 RR-R, as well as running with a torque sensor on his bike, with Garrett Gerloff (GRT Yamaha WorldSBK Team) running them close. Gerloff had gone top of the session with around an hour to go but found himself usurped by Rea and Haslam in the latter stages. The American had focussed on longer runs as well as trying a new fairing and brakes on his YZF R1.
Scott Redding (Aruba.It Racing – Ducati) had topped the times throughout most of the day with the British rider trying new items around the seat area of his Ducati Panigale V4 R, but finished the day in fourth place, less than two tenths off the pace. He was joined inside the top ten by teammate Michael Ruben Rinaldi with the Italian taking eighth in the classification.
The brand-new BMW M 1000 RR immediately showed its potential as Tom Sykes (BMW Motorrad WorldSBK Team) and Jonas Folger (Bonovo MGM Racing) finished fifth and seventh respectively, with Sykes’ BMW teammate, Michael van der Mark, 13th for his new team. BMW had brought a new swingarm, exhaust and winglets to the test as well as durability improvements to the electronics packages. It was an eventful day for Folger who lost crucial track time after a crash around two hours into the session, but he was able to return to the track with a couple of hours left.
Turkish star Toprak Razgatlioglu (PATA Yamaha with BRIXX WorldSBK) finished in sixth for the day as he focussed on refining the package he has with the Yamaha YZF R1, with small details to work on. Teammate Andrea Locatelli, who was focusing on race simulations with the aim of doing one full race simulation per day to continue his evolution from WorldSSP into WorldSBK; Locatelli completing the most laps of anybody with 93.
Making his debut on track with his new team, Chaz Davies (Team GoEleven) completed 65 laps as he posted the ninth best time, almost matching Rinaldi’s time during the day, with very few new parts on the bike for Davies. The Welshman was using this test to get back up to speed after not riding a bike on track for around five months. Alvaro Bautista (Team HRC) was 11th for the day, also trying a new exhaust system on his bike, but after the day admitted he was not at 100% following a small motocross accident last week. Alex Lowes (Kawasaki Racing Team WorldSBK) was in 12th place as his recovery from a shoulder injury continues, as he completed 81 laps during the day as looked to confirm items he had tested at Jerez and Aragon in previous tests, including trying the new Brembo callipers.
Rookie Axel Bassani (Motocorsa Racing) finished in 14th place with the Ducati Panigale V4 R trying a new exhaust system, while Japanese rookie Kohta Nozane (GRT Yamaha WorldSBK Team) was 15th as he continues to gear up for his maiden WorldSBK campaign. Tito Rabat’s (Barni Racing Team) session was ended over an hour early with the Spanish rider in 15th place; the team still searching for a base setup for the 2014 Moto2™ World Champion.
Isaac Viñales (Orelac Racing VerdNatura) got his hands on the 2021 Kawasaki ZX-10RR as he tested both the 2020 and 2021 models which features big electronic and engine changes. Christophe Ponsson (Alstare Yamaha) finished in 18th place with his team having undergone a restructure over the past few weeks, while new MIE Racing Honda Team signing Leandro Mercado was 19th on his debut for the team. Samuele Cavaliere (TPR Team Pedercini Racing) rounded out the 20-strong field as the Italian focussed on race simulations and long runs to get up to speed on Kawasaki machinery.
The industry leading Dunlop Sportmax Q4. Bold look, bold performance for bold riders. A purpose-built track-day tire achieves lean angles up to 62 degrees! The Sportmax Q4 is DOT-approved for street-legal use. Go ahead and drag a knee!
Dunlop Sportmax Q4
Here’s the first thing you need to know about Dunlop’s Sportmax Q4®: This purpose-built track day tire achieves lean angles up to 62 degrees*, more than any other street-legal tire Dunlop has ever made.
Utilizing technology shared by Dunlop’s cutting-edge MotoAmerica road race tires, the Q4 is made in Dunlop’s Buffalo, New York, plant on the same proprietary equipment as the racing products. Only Dunlop makes sport tires in America.
The Q4 is not a replacement for Dunlop’s popular Q3+, but instead adds depth to the Sportmax family lineup to accommodate track-day-level riding like no other Dunlop DOT street tire has before.
The Sportmax Q4 is sold through all Dunlop retailers, as well as race distributors, so it’s easily accessible to all riders.
– New tread pattern with low groove density that puts down a massive footprint, especially during maximum lean angles.
– Street-friendly performance—does not require tire warmers,and minimizes the need for chassis adjustments.
– Designed in new sizes such as 180/60ZR17 and 200/55ZR17 to work on sport bikes with sophisticated electronics packages. These new sizes also offer a more aggressive profile option for track use for many sport bikes.
– The rear tire features Dunlop’s Jointless Tread (JLT) technology, the same process used in Dunlop’s racing slicks. JLT applies a continuously wound tread strip over the carcass to achieve the ideal stability, flex, and grip across the tire’s tread profile.
– Dunlop’s proprietary Carbon Fiber Technology (CFT) in the sidewalls for even greater stability.
– Dunlop’s proprietary Intuitive Response Profile (IRP) for ultra-linear and responsive steering.
Availability
The Sportmax Q4 is available now at your local dealer!.
*As tested by Dunlop on a 2017 Suzuki GSX-R1000R on a closed track at Barber Motorsports Park.
Bruno Silva (9) leads Fernando Silva (63) at Homestead-Miami Speedway. Photo by John Sackett/At The Apex Photos, courtesy FMRRA.
FMRRA: Florida Motorcycle Road Racing Association
2021 Round 5: Homestead-Miami Speedway
March 27-28
Bruno Silva took his Dunlop-shod Suzuki GSX-R600 to three tough wins during the 2021 FMRRA Round 5 at Homestead-Miami Speedway. Bruno was able to pull out the wins in the 12-lap Superstock 600 Grande Corsa and six-lap Superstock 600 Sprint race along with the Sunoco Superbike 600 Sprint race with only his brother Fernando Silva able to steal one win on his Dunlop Suzuki GSX-R600 in the Sunoco Superbike 600 Grande Corsa.
Armando Ferrer was able to take two wins on his Dunlop BMW S 1000 RR in the Sunoco Superbike Grande Corsa and Sprint race. Alex Arango also took two wins on his Pirelli BMW S 1000 RR in the Superstock 1000 Sprint race and the overall win the Euro Cup Sprint race.
In the amateur division, Julian Correa went undefeated with four wins on his Dunlop Moriwaki 250 in the Moto 3 Grande Corsa, Moto 3 Sprint, Production Twins Grande Corsa, and Production Twins Sprint races.
FMRRA would like to thank our sponsors for 2021 for their continued support of our passionate racers and the sport as a whole.
Sunoco Racing Fuels
Southern Racing Fuels
Palm Beach County Sports Commission
Bridgestone Tires
Dunlop Motorcycle Tires
Vanson Leathers
MYLAPS Sports Timing
Florida Track Days
FMRRA Returns to Palm Beach International Raceway for Round 6 on April 10-11.
For more racing information visit:
www.fmrra.com
Full Season Championship Results and Individual Race Results are conveniently available online at:
https://www.fmrra.com/championships/
or follow us on social media:
http://www.instagram.com/floridaroadracing
http://www.facebook.com/fmrra
Editorial Note: Use the zoom and scroll tools in the bottom left corner of the PDF viewer to better see all of the race results.
Bobby Fong (50) in action at Circuit of The Americas. Photo by David Swarts.
M4 ECSTAR Suzuki’s Bobby Fong stole the spotlight in dramatic fashion at the official MotoAmerica/Dunlop pre-season test at Circuit of The Americas (COTA).
Riding his GSX-R1000 with a soft race-compound rear Dunlop tire, Fong lapped the 3.4-mile, 20-turn road course in 2:08.343 – the fastest lap time of the two-day test and a time faster than Josh Herrin’s 2019 race lap record of 2:08.994.
“It wasn’t too crazy of a lap, but I did tuck the front so long and went so wide in Turn Seven and missed my apex by a long shot,” said Fong. “I thought my lap was done. I thought, ‘To hell with it. I’ll just finish the lap and see what lap time I get anyway.’ And it was still a 2:08.3! So, I’m confident it could have been a high 2:07, for sure. But it’s just a test, so it doesn’t matter, obviously. The main thing is we left the test on a positive note.”
If saving his best lap for last wasn’t dramatic enough, MotoAmerica added some drama by initially taking Fong’s lap time away.
On his pit-in lap from his next-to-last stint, Fong straight-lined COTA’s fast esses section, as many riders did on pit-in laps during the test. The call from the corner marshals reporting that Fong did this, however, didn’t reach race direction until several minutes later when Fong was in the process of doing his fastest flying lap. Race direction then ruled that Fong had cut the course and instructed timing and scoring to invalidate the lap.
When MotoAmerica initially took the lap time away, Fong insisted that he had not cut the course. Fong’s team questioned MotoAmerica’s decision, and after a short investigation–including timing and scoring questioning the decision–MotoAmerica race direction admitted that it was a mistake and reinstated Fong’s best lap.
Up until the last session it looked as if newcomer Loris Baz or 2020 MotoAmerica Superbike Championship runner-up Jake Gagne would come away with fast lap honors.
Baz and his Warhorse HSBK Racing Ducati New York Panigale V4 R were the class of the field on Day One, with the tall Frenchman doing a fastest lap time of 2:08.595.
Baz didn’t have as much success on Day Two, which included a small crash and a best lap time of only 2:09.127 in cooler and windier conditions. But the former MotoGP and World Superbike rider still left the test second-fastest overall and happy with the work he did.
Gagne led sessions six and seven on Day Two even though he and his new crew focused on continuing their baseline setup work on his Fresh N’ Lean Attack Performance Yamaha YZF-R1 as opposed to seeking a single fast lap. Gagne never tried a soft-compound tire during the two days but still got down to a 2:08.902 while using a hard-compound rear Dunlop Wednesday, and that put him third overall at the test.
Mathew Scholtz mounted a soft-compound rear Dunlop to his Westby Racing Yamaha YZF-R1 at the end of the day Wednesday and tried to go for a fast lap time, but he said he messed up his quickest lap. Still, the South African finished with a best lap time of 2:08.957 (fourth-fastest overall), which he said was the quickest he’s gone at COTA “by far.”
Gagne’s teammate Josh Herrin said he was having a “terrible” test until the final minutes of the final session. That’s when his crew chief Richard Stanboli gambled on a big shock change to help Herrin get his Yamaha turned mid-corner. The change worked well, so Herrin mounted a new set of Dunlops and hustled around the track just in time to get in one fast flyer. That lap was a fifth-quickest 2:09.642 and Herrin said it felt like winning a race.
Fong’s teammate Cameron Petersen, the reigning MotoAmerica Stock 1000 Champion, had a positive debut on his new Suzuki Superbike. In spite of riding with an injury to his left foot that made downshifting difficult and doing long stints impossible due to the pain, Petersen was able to crack off a 2:09.751 at the end of Wednesday, ranking him sixth overall.
Seventh overall on the combined Superbike test times was Jayson Uribe, who did a 2:11.829 on his new Fly Racing/ADR Motorsports Suzuki GSX-R1000. Unfortunately, Uribe ended his test early with a fast crash Wednesday afternoon, but the Californian was relatively uninjured and was happy with the progress he made to that point.
Uribe’s teammate/team owner David Anthony was eighth in the combined times with a 2:13.154.
The fastest Stock 1000 rider was Jake Lewis, who did a 2:14.374 on his new Altus Motorsports Suzuki GSX-R1000.
Fong Ends MotoAmerica Dunlop Preseason Test On Top At COTA
Suzuki Rider Nails Down Fast Time In Final Session Of Two-Day Texan Test
AUSTIN, TX (March 31, 2021) – M4 ECSTAR Suzuki’s Bobby Fong ran through the gamut of emotions in the final session of the two-day Dunlop Preseason Test at the Circuit of the Americas on Wednesday – elation, disappointment and, ultimately, happiness.
Fong turned in the best lap of the test in the eighth and final session today, but the lap was initially taken away when it was reported that he had cut the track. The issue was resolved, however, when it was determined that Fong cut the track, but not on his fast lap. That meant that Fong leaves Texas with bragging rights as the fastest Superbike rider over the two days, his 2:08.343 bettering Loris Baz’s 2:08.595 from Tuesday’s final session.
“Hero to zero like that,” Fong said before knowing that his quick lap had been reinstated. “They said I cut the track, but I didn’t. I wouldn’t lie and I’d be honest here. We did a good test and it’s unfortunate not to see my name on top. The team has been doing a lot of hard work here and it’s unfortunate for the team because we wanted to be on top. But we will bring it to Atlanta and bring the heat. We haven’t tested at all and I haven’t been on a road race bike since October and have just been riding motocross a lot. Yesterday was kind of weird. We started off really strong and then we cracked a swingarm and had to go to a back-up one that we had to test anyway. It wasn’t working as well and we need to do more development with that, but with that being said they fixed the swingarm overnight and we got back to where we started, and we just started improving today. Overall, it was a really good test.”
Fresh N’ Lean Attack Performance Yamaha’s Jake Gagne ended the day as the second fastest of the Superbike men, the 2020 MotoAmerica Superbike Championship runner-up lapping at 2:08.902 in today’s third session.
“It was a great test, and we got a lot done,” Gagne said. “We worked through a lot of stuff, a lot of chassis stuff and electronics. Luckily the weather held out today. It was little windy, but actually pretty nice. We got a lot of laps in and just got to try stuff to see what works, what doesn’t work. My goal was working with my crew chief; we weren’t focused on lap times. I think a lot of the guys were using the softer tires and we stayed on the nine-sevens the whole time. We just wanted to work on things so I could get a feel for what the bike does when we do this or that. We really learned a lot. We didn’t want to throw down lap times we wanted to do what we could do to build a good race setup.”
Third fastest overall on Wednesday was Westby Racing’s Mathew Scholtz with his 2:08.957 with the South African doing his best in today’s third session.
Frenchman Loris Baz, who was making his MotoAmerica debut, slipped down the order today to fourth fastest, but his fast lap from yesterday put him just behind Fong after two days of testing on the Warhorse HSBK Racing Ducati New York Panigale V4 R. Baz also had his first MotoAmerica crash, a slow tip-over in turn one early in the final day.
“Definitely, the conditions were different than yesterday,” Baz said. “Really windy and the bike is pretty sensitive to the wind with the wings. But it was good to try the bike in completely different conditions than yesterday. I did a lot of long runs, honestly, and the only time I tried a softer tire was at the end and I didn’t use it well. We worked on making long runs on the race tire, like 10-lap runs. We did a good job, and I had a better feeling on the long run than yesterday. The lap times were a bit slower, but we did a good job.”
Gagne’s Fresh N’ Lean Attack Performance Yamaha teammate Josh Herrin ended the day fifth overall and just ahead of M4 ECSTAR Suzuki’s Cameron Petersen.
Fly Racing ADR Motorsports’ Jayson Uribe and David Anthony ended up seventh and eighth, though Uribe was fortunate to escape injury in a high-speed crash in the penultimate session today.
Altus Motorsports’ Jake Lewis and Thrashed Bike Racing’s Max Flinders rounded out the top 10 overall on Wednesday.
The battle for supremacy in the 2021 MotoAmerica Superbike Championship will kick off in earnest at Michelin Raceway Road Atlanta, April 30-May 2.
HONOS Kawasaki rider Richie Escalante’s defense of his 2020 Supersport Championship doesn’t begin until round one at Michelin Raceway Road Atlanta, but he made a convincing statement at the preseason test that he is clearly the favorite to take the title again in 2021. Escalante led all eight Supersport practice sessions aboard his 2020-spec machine, and he anticipates that his 2021 Kawasaki ZX-6R will be an even better bike than the one on which he won 13 races last year.
In SportbikeTrackGear.com Junior Cup, Landers Racing Kawasaki rider Ben Gloddy made good work of the two-day test as he was the quickest rider in all but the final practice session. He’d most likely have been a perfect eight for eight, but he suffered a minor tip-over during Practice 8 and, even though he was uninjured, he wasn’t able to record a lap time during the concluding session. In Twins Cup, Wrench Motorcycles Yamaha rider Ethan Cook went quickest overall.
More, from a press release issued by Westby Racing:
Westby Racing’s Mathew Scholtz Is Fourth-Quickest Superbike Rider At MotoAmerica Dunlop Official Preseason Test
Mathew Scholtz (11). Photo by Brian J. Nelson, courtesy Westby Racing.
Austin, TX – March 31, 2020 – Back to 100% fitness after being injured in a crash last year at Indianapolis Motor Speedway, Mathew Scholtz came into the Circuit of The Americas (COTA) for the MotoAmerica Dunlop Official Preseason Test looking lean, walking tall, and clearly showing he was ready to record some fast laps aboard his #11 Westby Racing Yamaha YZF-R1 Superbike.
Out of eight practice sessions held during the two-day test, Mathew emerged as the fourth-fastest overall rider, with a best lap of 2:08.957 occurring during the penultimate session.
About the test, Mathew said, “Ending up fourth overall was really positive for me. We improved in every single session. The team, all the hard work that they’ve done during the off-season certainly paid off. I couldn’t be happier. After such a terrible injury that ended my season early last year, to come here after having minimal track time, it feels great. COTA has never really been a good track for me. It doesn’t suit the Yamaha, and for some reason, I really struggle here. So, to be towards the front-end of the field at this track, I couldn’t be happier. It gives me a lot of confidence going into the first round.
“We made a few changes today. Some of them worked, some of them didn’t, but we know what to do in different situations if we do run into any challenges during the season. At this test, we set all of our quickest times on tires that we would be racing with. We really focused on that, on consistency, and on our race pace. One-lap speed wasn’t really something we were looking for, but it was really nice to be at the top end. Also, it was really nice to look at the trap speed and see that we were up there in that category, too, because that was something that we were struggling with last year, and it’s going to make things a heck of a lot easier for me.
“I’m just really thankful to be back in the MotoAmerica paddock, and I’m looking forward to starting the season at my home race. We’ll see how we fare.”
Next up for Westby Racing is round one of the 2021 MotoAmerica Championship, which takes place at Michelin Raceway Road Atlanta on April 30 through May 2.
For more Westby Racing updates, including news, photos, and videos, visit https://www.westbyracing.com
Also, visit “Westby Racing” on your favorite social media site.
More, from a press release issued by Wrench Motorsports:
Impressive debut with Wrench Motorsports for Ethan Cook at Circuit of the Americas
19 year old Ethan Cook kickstarted his 2021 MotoAmerica season with Wrench Motorsports in fine style this week, topping the Official MotoAmerica Twins Cup Test at the Circuit of the Americas.
Cook, who only inked the deal within the last couple of weeks, used the multiple COTA sessions to adjust to his new steed, impressing at the rate in which he improved at the home of the US Grand Prix.
Born and raised in San Diego, California, 19-year-old Ethan Cook started racing local motocross aged 9 where he quickly progressed, traveling the country to compete in amateur national competitions including the Lorreta Lynns Amateur National, the Freestone JS7 Amateur national, and the Mammoth Motocross series.
He made the move to tarmac in 2018 thanks to an opportunity from his mentor Bradley Ward. Initially riding a Kawasaki Ninja 400 with top 10 results racing the CVMA Race series at Chuckwalla and podium finishes at the WERA Race Series the next couple of years saw Ethan competing in various national disciplines of racing, taking in various club championships including WERA, AFM, CVMA races in the California State and in MotoAmerica’s Junior Cup class.
With the support and guidance from his mentors Bradley and Andrew Ward, and David Anthony, Ethan has also raced a Kawasaki ZX10R in Chuckwalla’s CVMA race series, taking to it like a duck to water, achieving podium finishes in the premier classes that the series has to offer.
For 2021 he will race for Wrench Motorsports in the MotoAmerica Twins Cup Class, the season commencing at Road Atlanta, Georgia, at the end of April.
Ethan Cook: “It was a wet and foggy start at COTA and my first time riding the Twins Cup bike. We made a lot of changes on the first day, really just trying to get me comfortable. It dried out by the afternoon and I was able to go faster almost immediately. We put some new tyres in for the final session and was able to go even quicker. The second day went really well. I improved by over three seconds on my time from Day 1. It was pretty wet first thing. I went out on slick tyres so didn’t really learn much. It dried up for the third session. We made some changes to the front forks and I felt really good. All in all, it’s been a good test. I am learning a lot and really getting on well with the team. They’re making me feel really welcome and I can’t wait to get the season started.”
For more information go to EthanCookRacing.com
Circuit of The Americas. Photo courtesy Circuit of The Americas.
Hayden Bicknese crashed his Altus Motorsports Kawasaki Ninja 400 in the final MotoAmerica SportbikeTrackGear.com Junior Cup test session, but not before he turned the fastest lap time in the session, a 2:31.859.
Ben Gloddy, the leader of six of the other Junior Cup test sessions, crashed his Landers Racing Kawasaki Ninja 400 without injury early in session eight and did not record any lap times. The 2:29.874 Gloddy did in session seven held up as the fastest lap time among the Junior Cup testers.
Jake Gagne (32) at speed Wednesday at the MotoAmerica test at COTA. Photo by David Swarts.
Editorial Note: The “Scheibe Test Rider” was Max Flinders, who rode the Scheibe Racing BMW S1000RR B bike to ensure it was functioning properly, according to team owner Steve Scheibe.
Five manufacturers in the top five, Rea fastest on day one of Barcelona test
Reigning Champion Jonathan Rea topped the times on day one as all manufacturers feature in the top five in Barcelona
It was left late to go top of the times in day one of the Supported Test at the Circuit de Barcelona-Catalunya on the first day of action for MOTUL FIM Superbike World Championship machines but, with around an hour left of the session, six-time Champion Jonathan Rea (Kawasaki Racing Team WorldSBK) stormed to the top of the timesheets to take day one honours.
It had been a quiet start for Rea as he found himself in the middle of the timesheets but slowly worked his way up the order, culminating with the Northern Irishman topping the day. Rea had spent the day confirming items on the chassis as well as front forks from Showa on his brand-new 2021 ZX-10RR, but posted a time of 1’40.793s to go fastest as he completed 68 laps, lapping almost one second faster than the 2020 Tissot Superpole fastest time, albeit on a revised layout.
Rea finished ahead of Leon Haslam (Team HRC) with the Honda rider trying new exhaust systems on his CBR1000 RR-R, as well as running with a torque sensor on his bike, with Garrett Gerloff (GRT Yamaha WorldSBK Team) running them close. Gerloff had gone top of the session with around an hour to go but found himself usurped by Rea and Haslam in the latter stages. The American had focussed on longer runs as well as trying a new fairing and brakes on his YZF R1.
Scott Redding (Aruba.It Racing – Ducati) had topped the times throughout most of the day with the British rider trying new items around the seat area of his Ducati Panigale V4 R, but finished the day in fourth place, less than two tenths off the pace. He was joined inside the top ten by teammate Michael Ruben Rinaldi with the Italian taking eighth in the classification.
The brand-new BMW M 1000 RR immediately showed its potential as Tom Sykes (BMW Motorrad WorldSBK Team) and Jonas Folger (Bonovo MGM Racing) finished fifth and seventh respectively, with Sykes’ BMW teammate, Michael van der Mark, 13th for his new team. BMW had brought a new swingarm, exhaust and winglets to the test as well as durability improvements to the electronics packages. It was an eventful day for Folger who lost crucial track time after a crash around two hours into the session, but he was able to return to the track with a couple of hours left.
Turkish star Toprak Razgatlioglu (PATA Yamaha with BRIXX WorldSBK) finished in sixth for the day as he focussed on refining the package he has with the Yamaha YZF R1, with small details to work on. Teammate Andrea Locatelli, who was focusing on race simulations with the aim of doing one full race simulation per day to continue his evolution from WorldSSP into WorldSBK; Locatelli completing the most laps of anybody with 93.
Making his debut on track with his new team, Chaz Davies (Team GoEleven) completed 65 laps as he posted the ninth best time, almost matching Rinaldi’s time during the day, with very few new parts on the bike for Davies. The Welshman was using this test to get back up to speed after not riding a bike on track for around five months. Alvaro Bautista (Team HRC) was 11th for the day, also trying a new exhaust system on his bike, but after the day admitted he was not at 100% following a small motocross accident last week. Alex Lowes (Kawasaki Racing Team WorldSBK) was in 12th place as his recovery from a shoulder injury continues, as he completed 81 laps during the day as looked to confirm items he had tested at Jerez and Aragon in previous tests, including trying the new Brembo callipers.
Rookie Axel Bassani (Motocorsa Racing) finished in 14th place with the Ducati Panigale V4 R trying a new exhaust system, while Japanese rookie Kohta Nozane (GRT Yamaha WorldSBK Team) was 15th as he continues to gear up for his maiden WorldSBK campaign. Tito Rabat’s (Barni Racing Team) session was ended over an hour early with the Spanish rider in 15th place; the team still searching for a base setup for the 2014 Moto2™ World Champion.
Isaac Viñales (Orelac Racing VerdNatura) got his hands on the 2021 Kawasaki ZX-10RR as he tested both the 2020 and 2021 models which features big electronic and engine changes. Christophe Ponsson (Alstare Yamaha) finished in 18th place with his team having undergone a restructure over the past few weeks, while new MIE Racing Honda Team signing Leandro Mercado was 19th on his debut for the team. Samuele Cavaliere (TPR Team Pedercini Racing) rounded out the 20-strong field as the Italian focussed on race simulations and long runs to get up to speed on Kawasaki machinery.
A “press release” is promotional text issued by a rider, team, company or organization to inform
the public about an event, product, or service from the issuer’s own point of view, and if deemed
to have news value, may be placed on roadracingworld.com as a service to our readers.
A press release is not an article written by Roadracingworld.com staffers. When a post is labeled with the words “press release”, it means that Roadracingworld.com is not responsible for its content and that Roadracingworld.com makes no guarantee that it is accurate. Not all press releases are posted and Roadracingworld.com may reject press releases if the content is too heavy on commercial promotion with little or no news value or if the press release contains obvious errors.
Accessibility
Accessibility modes
Epilepsy Safe Mode
Dampens color and removes blinks
This mode enables people with epilepsy to use the website safely by eliminating the risk of seizures that result from flashing or blinking animations and risky color combinations.
Visually Impaired Mode
Improves website's visuals
This mode adjusts the website for the convenience of users with visual impairments such as Degrading Eyesight, Tunnel Vision, Cataract, Glaucoma, and others.
Cognitive Disability Mode
Helps to focus on specific content
This mode provides different assistive options to help users with cognitive impairments such as Dyslexia, Autism, CVA, and others, to focus on the essential elements of the website more easily.
ADHD Friendly Mode
Reduces distractions and improve focus
This mode helps users with ADHD and Neurodevelopmental disorders to read, browse, and focus on the main website elements more easily while significantly reducing distractions.
Blindness Mode
Allows using the site with your screen-reader
This mode configures the website to be compatible with screen-readers such as JAWS, NVDA, VoiceOver, and TalkBack. A screen-reader is software for blind users that is installed on a computer and smartphone, and websites must be compatible with it.
Online Dictionary
Readable Experience
Content Scaling
Default
Text Magnifier
Readable Font
Dyslexia Friendly
Highlight Titles
Highlight Links
Font Sizing
Default
Line Height
Default
Letter Spacing
Default
Left Aligned
Center Aligned
Right Aligned
Visually Pleasing Experience
Dark Contrast
Light Contrast
Monochrome
High Contrast
High Saturation
Low Saturation
Adjust Text Colors
Adjust Title Colors
Adjust Background Colors
Easy Orientation
Mute Sounds
Hide Images
Hide Emoji
Reading Guide
Stop Animations
Reading Mask
Highlight Hover
Highlight Focus
Big Dark Cursor
Big Light Cursor
Cognitive Reading
Virtual Keyboard
Navigation Keys
Voice Navigation
Accessibility Statement
www.roadracingworld.com
November 19, 2026
Compliance status
We firmly believe that the internet should be available and accessible to anyone, and are committed to providing a website that is accessible to the widest possible audience,
regardless of circumstance and ability.
To fulfill this, we aim to adhere as strictly as possible to the World Wide Web Consortium’s (W3C) Web Content Accessibility Guidelines 2.1 (WCAG 2.1) at the AA level.
These guidelines explain how to make web content accessible to people with a wide array of disabilities. Complying with those guidelines helps us ensure that the website is accessible
to all people: blind people, people with motor impairments, visual impairment, cognitive disabilities, and more.
This website utilizes various technologies that are meant to make it as accessible as possible at all times. We utilize an accessibility interface that allows persons with specific
disabilities to adjust the website’s UI (user interface) and design it to their personal needs.
Additionally, the website utilizes an AI-based application that runs in the background and optimizes its accessibility level constantly. This application remediates the website’s HTML,
adapts Its functionality and behavior for screen-readers used by the blind users, and for keyboard functions used by individuals with motor impairments.
If you’ve found a malfunction or have ideas for improvement, we’ll be happy to hear from you. You can reach out to the website’s operators by using the following email
Screen-reader and keyboard navigation
Our website implements the ARIA attributes (Accessible Rich Internet Applications) technique, alongside various different behavioral changes, to ensure blind users visiting with
screen-readers are able to read, comprehend, and enjoy the website’s functions. As soon as a user with a screen-reader enters your site, they immediately receive
a prompt to enter the Screen-Reader Profile so they can browse and operate your site effectively. Here’s how our website covers some of the most important screen-reader requirements,
alongside console screenshots of code examples:
Screen-reader optimization: we run a background process that learns the website’s components from top to bottom, to ensure ongoing compliance even when updating the website.
In this process, we provide screen-readers with meaningful data using the ARIA set of attributes. For example, we provide accurate form labels;
descriptions for actionable icons (social media icons, search icons, cart icons, etc.); validation guidance for form inputs; element roles such as buttons, menus, modal dialogues (popups),
and others. Additionally, the background process scans all the website’s images and provides an accurate and meaningful image-object-recognition-based description as an ALT (alternate text) tag
for images that are not described. It will also extract texts that are embedded within the image, using an OCR (optical character recognition) technology.
To turn on screen-reader adjustments at any time, users need only to press the Alt+1 keyboard combination. Screen-reader users also get automatic announcements to turn the Screen-reader mode on
as soon as they enter the website.
These adjustments are compatible with all popular screen readers, including JAWS and NVDA.
Keyboard navigation optimization: The background process also adjusts the website’s HTML, and adds various behaviors using JavaScript code to make the website operable by the keyboard. This includes the ability to navigate the website using the Tab and Shift+Tab keys, operate dropdowns with the arrow keys, close them with Esc, trigger buttons and links using the Enter key, navigate between radio and checkbox elements using the arrow keys, and fill them in with the Spacebar or Enter key.Additionally, keyboard users will find quick-navigation and content-skip menus, available at any time by clicking Alt+1, or as the first elements of the site while navigating with the keyboard. The background process also handles triggered popups by moving the keyboard focus towards them as soon as they appear, and not allow the focus drift outside it.
Users can also use shortcuts such as “M” (menus), “H” (headings), “F” (forms), “B” (buttons), and “G” (graphics) to jump to specific elements.
Disability profiles supported in our website
Epilepsy Safe Mode: this profile enables people with epilepsy to use the website safely by eliminating the risk of seizures that result from flashing or blinking animations and risky color combinations.
Visually Impaired Mode: this mode adjusts the website for the convenience of users with visual impairments such as Degrading Eyesight, Tunnel Vision, Cataract, Glaucoma, and others.
Cognitive Disability Mode: this mode provides different assistive options to help users with cognitive impairments such as Dyslexia, Autism, CVA, and others, to focus on the essential elements of the website more easily.
ADHD Friendly Mode: this mode helps users with ADHD and Neurodevelopmental disorders to read, browse, and focus on the main website elements more easily while significantly reducing distractions.
Blindness Mode: this mode configures the website to be compatible with screen-readers such as JAWS, NVDA, VoiceOver, and TalkBack. A screen-reader is software for blind users that is installed on a computer and smartphone, and websites must be compatible with it.
Keyboard Navigation Profile (Motor-Impaired): this profile enables motor-impaired persons to operate the website using the keyboard Tab, Shift+Tab, and the Enter keys. Users can also use shortcuts such as “M” (menus), “H” (headings), “F” (forms), “B” (buttons), and “G” (graphics) to jump to specific elements.
Additional UI, design, and readability adjustments
Font adjustments – users, can increase and decrease its size, change its family (type), adjust the spacing, alignment, line height, and more.
Color adjustments – users can select various color contrast profiles such as light, dark, inverted, and monochrome. Additionally, users can swap color schemes of titles, texts, and backgrounds, with over seven different coloring options.
Animations – person with epilepsy can stop all running animations with the click of a button. Animations controlled by the interface include videos, GIFs, and CSS flashing transitions.
Content highlighting – users can choose to emphasize important elements such as links and titles. They can also choose to highlight focused or hovered elements only.
Audio muting – users with hearing devices may experience headaches or other issues due to automatic audio playing. This option lets users mute the entire website instantly.
Cognitive disorders – we utilize a search engine that is linked to Wikipedia and Wiktionary, allowing people with cognitive disorders to decipher meanings of phrases, initials, slang, and others.
Additional functions – we provide users the option to change cursor color and size, use a printing mode, enable a virtual keyboard, and many other functions.
Browser and assistive technology compatibility
We aim to support the widest array of browsers and assistive technologies as possible, so our users can choose the best fitting tools for them, with as few limitations as possible. Therefore, we have worked very hard to be able to support all major systems that comprise over 95% of the user market share including Google Chrome, Mozilla Firefox, Apple Safari, Opera and Microsoft Edge, JAWS and NVDA (screen readers).
Notes, comments, and feedback
Despite our very best efforts to allow anybody to adjust the website to their needs. There may still be pages or sections that are not fully accessible, are in the process of becoming accessible, or are lacking an adequate technological solution to make them accessible. Still, we are continually improving our accessibility, adding, updating and improving its options and features, and developing and adopting new technologies. All this is meant to reach the optimal level of accessibility, following technological advancements. For any assistance, please reach out to