Home Blog Page 5849

A Preview Of The Suzuka 8 Hours, Which Is Scheduled For July 29

0

Australia’s Damian Cudlin will head to Japan ready to fight back into championship contention with a strong result firmly in his sights. Returning to the most prestigious single motorcycle event for a 3rd time, Cudlin believes he and the YART squad stand a strong chance for success not only towards the championship, but for overall honours as well. “This will be my 3rd time racing at Suzuka so obviously I’m going into this event better prepared than I’ve been in the past.” Cudlin said. “It’s a huge test of fitness in the humidity of Japan, and a place where you can gain a lot by being in good shape. I’m heading to this event lighter and physically fitter than before, and I think it’ll pay off.” Cudlin’s Yamaha Austria Racing Team has a proven track record in Japan, finishing in the top 10 outright twice in the last two visits, including taking the SBK class victory last year. This year they will be flying the flag for Yamaha’s European assault and will be looking to continue their string of strong results in the Mecca of Motorcycle Races. “YART have always had good results at Suzuka and it’s always been an important race in the championship.” said Team Manager Mandy Kainz. “It’s hard to compete with the Japanese at Suzuka with our European stuff, but we’ve often done the best job of the permanent teams which is important for our championship hopes. This year we hope to move forward in the series standings and gain a strong result for Yamaha.” Cudlin, who will ride alongside regular team mate Igor Jerman, will also be joined by fellow Aussie Steve Martin, who will replace the still injured Sebastian Scarnato. “It’s great to know we’ll have a rider of Steve’s calibre joining us in Suzuka.” Cudlin said. “I’m sure his experience riding so many different bikes in WSBK will help us get the most out of the YART R1, and being a Suzuka veteran himself I’m sure he’ll prove to be fast as well. It can only be good for our team, and I’m looking forward to working with him.” The Suzuka 8 hour will be run on the 29th of July.

Details On The Changes To The Superbike World Championship Technical Rules For 2008

0

2. TECHNICAL REGULATIONS (TO BE APPLIED AS FROM 01.01.2008) 2.1 INTRODUCTION 2.2 CLASSES 2.3 GENERAL ITEMS 2.3.3 Handlebars 2.3.4 Control levers 2.3.5 Wheel and rims (See Table 1) 2.3.6 Tyres 2.3.8 Adaptation of the tyre’s surface 2.3.9 The use of tyre warmers is allowed. 2.3.10 Use of Tyres The competitors shall only use tyres distributed by the Official Supplier during the event. For each event, all tyres must be made of the same quality and shall be strictly identical. All tyres to be used must be easily identifiable with a colour marking or a numerical system, to be applied by the Official Supplier at the time of manufacturing. The Official Supplier shall provide the Superbike Technical Director a written description of the markings and the general characteristics of the different types of tyres. After the tyre samples have been delivered to the Superbike Technical Director the day prior to the start of the official practice, any modification of the tread pattern (with the exception of normal wear) is not permitted. During free practices, qualifying practices, (Superpole for Superbike), warm up session (and race for Superstock), no motorcycle may enter the track without the front and rear tyres being marked (see also Art. 2.4.6.7/ 2.5.6.7/ 2.7.6.7). The Superbike Technical Director may, at his discretion, require the exchange of one (1) or more competitors’ tyres for a tyre sample under his control. The tyres exchanged remain under his control and he can exchange them for the ones of another competitor. An appropriate identification will be applied on the left side of each tyre. No tyres marked for one event may be used during another event. When indicated (see Art. 2.4.6.7/ 2.5.6.7/ 2.7.6.7), no unmarked dry-weather tyres are allowed in the pits. 2.3.11 Ballast The ballast must be made from solid metallic piece/s, firmly, securely connected, either through an adapter or directly to the main frame or engine, with minimum 2 steel bolts (min. 8 mm diameter, 8.8 grade or over). Fuel in the fuel tank can be used as ballast. Nevertheless, the verified weight may never fall below the required minimum weight. 2.4 SUPERBIKE TECHNICAL SPECIFICATIONS Rules intended to give freedom to modify or replace some parts in the interest of safety. EVERYTHING THAT IS NOT AUTHORISED AND PRESCRIBED IN THIS RULE IS STRICTLY FORBIDDEN. Superbike motorcycles require an FIM homologation (see Art. 2.9). All motorcycles must comply in every respect with all the requirements for road racing as specified in the Technical Regulations, unless it is equipped as such on the homologated machine. The appearance from both front, rear and the profile of Superbike motorcycles must (except when otherwise stated) conform in principle to the homologated shape (as originally produced by the manufacturer). The appearance of the exhaust system is excluded from this rule. 2.4.1 Engine configurations and displacement capacities The following Engine configurations compose the Superbike class. Homologation Year, Homologation valid for, Engine configuration and displacements, Minimum weight, Diameter of restrictor Until 2006, 5 years, Over 750 cc up to (included) 1000 cc 2 cylinders ** (1000 cc 2 cylinders), 162 kg, n/a (*) As from 2006, 5 years, Over 750 cc up to 1000 cc 3- cylinders and 1000 cc 4 cylinders **(1000 cc 3 & 4 cylinders), 162 kg, n/a (*) As from 2008, 5 years, Over 850 cc up to 1200cc 2 cylinders **(1200 cc 2 cylinders), 168 kg, 50 mm (*) n/a = not applicable (**) Reference used in the Articles hereunder The displacement capacities must remain at the homologated size. Modifying the bore and stroke to reach class limits is not allowed. 2.4.2 Balancing various motorcycle concepts In order to equalize the performance of motorcycles with different engine configurations, changes in the minimum weight and air restrictor sizes are applied according to their respective racing performances. These handicaps are applied only to the ‘1200 cc 2 cylinder’ machines homologated as from 01.01.2008. At first, a weight handicap is applied according to the relevant provisions in Art. 2.4.2.2. The minimum weight may be reduced twice by 3 kg to a maximum reduction of 6 kg, or increased once and by 3 kg maximum. If this measure proves to be insufficient, then a second handicap will be applied: the size of the intake ports will be changed by means of air restrictors. These changes to the size of the air restrictor diameter will be applied in 2 mm steps, according to the relevant provisions described in Art. 2.4.4.3. 2.4.2.1 Minimum Weights The minimum weight will be: 1000 cc 2- cylinders 162 kg 1000 cc 3 & 1000 cc 4 cylinders 162 kg 1200 cc 2 cylinders 168 kg (**) (**) See handicap rule for further information. During the final inspection at the end of each race, the machines chosen will be weighed in the condition they finished the race. The established weight limit must be met in the condition the machine has finished the race; nothing can be added to the machine. This includes water, oil, or fuel. During the practice and qualifying sessions, riders may be asked to submit their motorcycle to a weight control. In all cases, the rider must comply with this request. At any time of the event, the weight of the whole machine (including the tank and its contents) must not be less than the minimum weight with a tolerance of 1 kg. The use of ballast is allowed to stay over the minimum weight limit and may be required due to a handicap system. The use of ballast and weight handicap must be declared to the Superbike Technical Director at the preliminary checks. 2.4.2.2 Minimum weight adjustments The minimum weights will be increased or decreased in steps of 3 kg according to the following procedure: 1. By taking the race points of the riders of the best two 1000 cc 4 cylinders and best two 1200 cc 2 cylinders in each race an average will be calculated after every event, the ‘event average’. If there is only one finisher from one of the configurations, the ‘event average’ will be calculated from the first rider of each configuration in each race. No ‘event average’ points will be calculated if one of the configurations has no finishers. The ‘event average’ will then be calculated, based on the results of the other race from the same event. If neither race has any finishers from one of the configurations, the event will not be considered. 2. ‘Wet’ races (as declared by the Race Director) are not taken in account for the calculation of an ‘event average’. 3. After 3 events, the average value of the ‘event averages’ of each configuration will be calculated. The score of the 1000 cc 4 cylinders and the score of the 1200 cc 2 cylinders will be compared as follows: · Should the average value of the ‘event averages’ over 3 events favour the 1200 cc 2 cylinders by more than 5 points, and if a rider of a machine with this configuration is leading the riders’ Superbike World Championship standings at that time, then the minimum weight of all 1200 cc 2 cylinders will be increased by 3kg. The upper limit is 171 kg. · Should average value of the ‘event averages’ over 3 events favour the 1000 cc 4 cylinders by more than 5 points, and if a rider of a machine with this configuration is leading the riders’ Superbike World Championship standings at that time, then the minimum weight of all 1200 cc 2 cylinders will be reduced by 3 kg. The lower limit is 162 kg. If the minimum weight is not updated, then the results of three more events will be considered, and a new average value of the ‘event averages’ will be calculated over six events and so on, over multiples of three events, until the points gap of the average value of the ‘event averages’ from the last minimum weight update is higher than 5. The Superbike Technical Director will inform all the teams about the possible minimum weight adjustments, within 24 hours from the end of the last event (the last meeting of the International Jury) where the average value of the ‘event averages’ was calculated. The new minimum weight adjustments must be applied from the first following event. 2.4.2 Carburation Instruments 2.4.4.1 For 1000 cc 2 cylinders · Carburation instruments refer to both throttle bodies and carburettors. · Carburation instruments must be used un-modified either as the original homologated carburation instrument or as the homologated optional carburation instrument. · The only modifications allowed to the homologated carburation instruments original or optional are jets, needles, throttle valves, fuel injectors and bell mouths. · Variable-length carburettor/fuel injection intake tract devices that function while the engine is operating are prohibited, unless such a system is used on the homologated machine · The original manufacturer must use the following criteria for the designing and making of the optional homologated carburation instruments. a) There is no limit for the intake size of an engine equipped either by carburettors or fuel injection systems. b) The optional carburettor / injector body material must remain the same as used on the original homologated carburation instruments. c) A minimum number of optional carburation instruments must be available as spare parts and be included in the manufacturer’s racing parts lists. All manufacturers must have a minimum of 15 sets available through traditional distributorships worldwide for the life of the homologation. The price of the optional carburation instruments to the public must not exceed twice the manufacturers suggested retail price of the original homologated carburation instrument in the country of origin. This price must be indicated on the Homologation Form. d) The motorcycle manufacturer may submit only one optional carburation instrument for each model at the time of homologation. e) The motorcycle manufacturer must supply a sample set of the original and optional carburation instruments to the FIM for use as comparison samples at the events. f) The motorcycle manufacturer must provide evidence that the minimum of 15 sets of optional carburation instruments have been manufactured. g) The optional carburation instruments must be available for at least three years after the homologation date. h) The carburation instrument homologation will be valid for the same period as the homologated motorcycle. i) An additional model of optional carburation instruments may be homologated during the life of the machine’s homologation. These carburation instruments must meet the same requirements as the original modified instruments. This is to allow development after the original homologation. · The optional carburation instruments may only be homologated at the same time as a new homologation. [see number i) above for additional optional carburation instruments] 2.4.4.2 For 1000 cc 3 & 4 cylinders and 1200 cc 2 cylinders · Carburation instruments refer to both throttle bodies and carburettors. · The original homologated carburation instruments must be used un-modified. · The use of optional homologated carburation instruments is not allowed. · The fuel injectors may be replaced, however they must fit without modification to the homologated throttle body. · The carburation instruments intake insulators may be modified. · Bell mouths may be altered or replaced. · Variable length intake tract devices that function while the engine is operating are not allowed, unless such a system is use on the homologated machine. · Vacuum slides may be fixed in the open position · Secondary throttle valves and shafts may be removed or fixed in the open position and the electronics may be disconnected or removed 2.4.4.3 Air restrictors for 1200 cc 2- cylinders Definition: An air restrictor is a metallic device with precisely 3 mm (+/-0.1 mm) of constant controlled section and which is placed in the induction tract after the carburation instrument (throttle body). No air and/or air-fuel mixture to the engine must by-pass the restrictor. No carburation part (injector, needle, slide, etc) must extend through the restrictor. Application: Only the 1200 cc 2 cylinders will be fitted with air restrictors. The initial air restrictor size to be installed is equivalent to a Ø 50 mm circular area (1963,5 mm2). Air restrictor size will be adjusted (in steps equivalent to a change of 2 mm in diameter or equivalent circular area, upwards to Ø 52 mm and then to no restrictor at all, downwards to a minimum of Ø 46 mm), if needed during the Championship, as described below in Art. 2.4.4.4. The Manufacturer must supply the FIM with 20 sets of plug-calibres (-gauges) to check the diameter of the air restrictor when using one of the prescribed sizes (Ø 52, Ø 50, Ø 48, Ø 46 mm). A Manufacturer may have a non-circular air restrictor, provided that the area of this restrictor is equivalent to the area of a nominal circular restrictor. In this case, the Manufacturer must supply the FIM with 20 sets of plug-calibres (- gauges) for measuring the restrictor during the technical verifications. The FIM may also request the Manufacturer to supply a cut section of the air restrictor(s) in each of the prescribed sizes. 2.4.4.4 Air Restrictor adjustment The minimum air restrictor size is increased or decreased in 2 mm steps in diameter of equivalent circular area, according to following procedure: 1. – If the minimum weight of the 1200 cc 2 cylinders configuration has reached the lower limit of 162 kg and, – if the resulting gap in the average value of ‘event averages’ is more than 5 points in favour of the 1000 cc 4- cylinders and, – if a rider of a 1000 cc 4 cylinder is leading the riders’ Superbike World Championship standings at that time, then the initial air restrictor size of the 1200 cc 2 cylinders will be increased by one size, to a Ø 52 mm (or the equivalent area 2123.7 mm2), or as a last step, without any air restrictor. 2. – If the minimum weight for 1200 cc 2 cylinder configuration has reached the upper limit of 171 kg and, – if the resulting gap of the average value of ‘event averages’ is more than 5 points in favour of the 1200 cc 2 cylinders and, – if a rider of a 1200 cc 2 cylinder is leading the riders’ Superbike World Championship standings at that time, then the initial air restrictor size of the 1200 cc 2 cylinders will be reduced by one size, to a Ø48 mm (or the equivalent area 1809,6 mm2), or, as last step, to a minimum of Ø46 mm (or the equivalent area 1661.9 mm2). If the air restrictor size is not updated, then the results of three more events will be considered, and a new average value of the ‘event averages’ will be calculated over six events and so on, over multiples of three events, until the points gap of the average value of the ‘event averages’ from the last air restrictor size update is higher than 5. The Superbike Technical Director will inform all the teams about the possible air restrictor size adjustments, within 24 hours from the end of the last event (the last meeting of the International Jury), where the average value of the ‘event averages’ was calculated. The new air restrictor size adjustments must be applied as from the first following event. 2.4.5 Fuel 2.4.6 Machine Specifications (From Art. 2.4.2.1, to be added, other text remains unchanged): The use of titanium in the construction of the front forks, the handlebars and the swingarm spindle is forbidden. 2.4.6.1 Frame Body and Rear Sub-Frame 2.4.6.2 Front Forks 2.4.6.3 Rear Fork (swing-arm) 2.4.6.4 Rear Suspension Unit 2.4.6.5 Wheels The use of titanium and light alloys is forbidden for wheel spindles (axles). 2.4.6.6 Brakes 2.4.6.7 Tyres 2.4.6.8 Foot Rest/Foot Controls 2.4.6.9 Handle Bars and Hand Controls 2.4.6.10 Fairing/Body Work & Number Plate Colours 2.4.6.11 Fuel Tank 2.4.6.12 Seat 2.4.6.13 Radiator/Oil Cooler 2.4.6.14 Air Box The air box may be altered or replaced from those fitted to the homologated motorcycle (a special design for racing is allowed). If fuel injectors are attached to the cover of the air box, their position must remain as original. The air filter element may be removed. The air box must be completely closed around the induction bell mouth and all engine breather tubes. Carburation instruments may be entirely within the airbox. The air box drains must be sealed. All motorcycles must have a closed breather system. The oil breather line must be connected and discharge in the airbox. The breather system (airbox plus any breather oil collector box) must be capable in the event of drain pipe blockage, of retaining a minimum of 1000 cc of discharged fluid. 2.4.6.17 Fuel Supply ECU can be modified or changed. Fuel pump and pressure regulator may be modified or changed. Fuel lines may be replaced. The fuel line(s) going from the fuel tank to the carburation instruments must be located in such a way that they are protected from possible defects. Fuel vent lines may be replaced. Fuel filters may be added. Fuel petcock may be altered or replaced from those fitted to the homologated motorcycle. 2.4.6.18 Engine The following engine components may not be altered from the homologated machine except as noted. The homologated engine design model cannot be changed. Homologated materials and castings for the crankcase, cylinder, cylinder head and gear-box housing must be used. Material for the crankcase, cylinder, cylinder head and gear-box housing may only be added by welding or removed by machining. The method of cam drive must remain as homologated unless a complete kit is available through normal commercial channels. These kits must be available in significant quantity and be listed in the racing spare parts book. · For 1000 cc 3 & 4 cylinders and 1200 cc 2 cylinders Aftermarket or modified cam drive components are allowed, however the cam drive must be in the homologated location. The method of valve retention must remain as the homologated model (no pneumatic valve retention devices are allowed unless fitted to the homologated model). All moving internal engine, gear-box and clutch parts may be altered or replaced including materials from those fitted on the homologated motorcycle (unless not allowed by the individual section covering the parts in question). Polishing and lightening of engine parts is permitted, except for carburation instruments (unless not allowed by the individual section covering the parts in question). · For all configurations The sequence in which the cylinders are ignited (i.e. 1-2-4-3), must remain as originally designed on the homologated model. Simultaneous (*) firing of 2 cylinders is also forbidden if not adopted on the homologated motorcycle. *up to 5 degrees firing difference in 2 cylinders is regarded as ‘simultaneous’ firing. 2.4.6.19 Cylinder Head The homologated cylinder head can be modified as follows: Homologated materials and castings for the cylinder heads must be used. Material for these parts may only be added by welding or removed by machining. The induction and exhaust system including the number of valves and or ports (intake and exhaust) must be as homologated. Porting and polishing of the cylinder head normally associated with individual tuning such as gas flowing of the cylinder head, including the combustion chamber is allowed. The compression ratio is free. The combustion chamber may be modified. The valves may be altered or replaced from those fitted to the homologated motorcycle. The valve seats may be altered or replaced from those fitted to the homologated motorcycle. The valve guide may be altered or replaced from those fitted to the homologated motorcycle. Valve springs may be altered or replaced from those fitted to the homologated motorcycle. The valve retainers may be altered or replaced from those fitted to the homologated motorcycle. · For 1000 cc 3 & 4 cylinders and 1200 cc 2 cylinders Aftermarket or modified valves, springs, retainers and other valve train components are permitted. The original number of valves must be maintained. a. Valve diameters, including stem, must remain as homologated. b. Valves must be made of the same basic material as the homologated valves. c. Valves must remain in the homologated location and at the same angle as the homologated valves, except for normal valve maintenance. d. Rocker arms (if any) must remain as homologated (material and dimensions). 2.4.6.20 Camshaft 2.4.6.21 Cam Sprockets or Gears 2.4.6.22 Crankshaft · For 1000 cc 2 cylinders Crankshaft may be altered or replaced from those fitted to the homologated motorcycle. Crankshaft stroke must remain as homologated. · For 1000 cc 3 & 4 cylinders and 1200cc 2 cylinders The following modifications are allowed to the homologated crankshaft: a. Bearing surfaces may be polished or a surface treatment may be applied. b. Balancing is allowed but only by the same method as the homologated crankshaft. (for example heavy metal i.e. Mallory metal inserts are not permitted unless they are originally specified in the homologated crankshaft.) c. Attachment of aftermarket ignition components or sensors is permitted. d. Balance shaft may be removed. 2.4.6.23 Oil Pumps and Oil Lines 2.4.6.24 Connecting Rods · For 1000 cc 2 cylinders and 1000 cc 3 & 4 cylinders Connecting rod may be altered or replaced from those fitted to the homologated motorcycle. Carbon composite or carbon fibre materials are not allowed if not used in the homologated motorcycle. · For 1200 cc 2 cylinders Connecting rod must remain as homologated. Polishing and lightening is not allowed. 2.4.6.25 Pistons · For 1000cc 2 cylinders, 1000 cc 3 & 4 cylinders Pistons may be altered or replaced from those fitted to the homologated motorcycle. · For 1200 cc 2 cylinders Standard piston or the kit (*) piston must be used. (*) The kit piston must have the same price as the standard one and must be listed in the current racing parts list of the Manufacturer and be on sale for customers. Within 90 days from the order, the customer must receive the kit piston set. 2.4.6.26 Piston Rings 2.4.6.27 Piston Pins and Clips 2.4.6.28 Cylinders 2.4.6.29 Crankcase/Gearbox housing and lateral covers 2.4.6.30 Transmission/Gearbox All transmission/gearbox ratios, shafts, drums, selector forks are free. Primary gear ratios are free. The number of gears must remain as homologated. Additions to gearbox or selector mechanism, such as quick shift systems, are allowed. Countershaft sprocket, rear wheel sprocket, chain pitch and size can be changed. 2.4.6.31 Clutch Aftermarket or modified clutches are permitted. Back torque limiter is permitted. · For 1000 cc 2 cylinders Clutch system (wet or dry type) and method of operation (cable/hydraulic) may be altered or replaced from those fitted to the homologated motorcycle. · For 1000 cc 3 & 4 cylinders and 1200cc 2 cylinders Clutch system (wet or dry type) and method of operation (cable/hydraulic) must remain as homologated. 2.4.6.32 Ignition/Engine Control System 2.4.6.33 Generator, alternator, electric starter 2.4.6.34 Exhaust System 2.4.7 The Following items MAY BE altered or replaced from those fitted to the homologated motorcycle. 2.4.8 The Following items MAY BE removed 2.4.9 The Following Items MUST BE Removed 2.4.10 The Following items MUST BE altered 2.4.11 Additional Equipment

FIM Officially Adds Red Bull Indy GP To 2008 MotoGP World Championship Calendar

0

A Road Racing World Championship Grand Prix event will be held next year on one of the most famous circuits in the world, Indianapolis. During a press conference held in Indianapolis, Indiana, United States, on Monday 16 July, the company Indianapolis Motor Speedway (IMS) and Dorna Sports announced they had signed an agreement for the running of a Grand Prix in Indianapolis as from 2008, including the three classes: 125cc, 250cc and Motogp. Among the persons present were Messrs Bart Peterson, Mayor of Indianapolis, Tony George, owner of Indianapolis Motor Speedway, Joe Chitwood, IMS Chief Executive Officer, Vito Ippolito, FIM President, Carmelo Ezpeleta, Dorna Managing Director, Mrs Gill Campbell, Laguna Seca CEO, American riders Kenny Roberts Jr and Kevin Schwantz, and 200 invited motorcyclists. In his speech, Mr Ippolito underlined the importance for the motorcycle sport to come back to Indianapolis, where everything started in 1909 with a motorcycle race, and the importance of all parties working together Dorna and IMS for the three-year contract, and the FIM for the homologation and support. Moreover, Indianapolis is one of the main and most well-known – places in the world of motorsports, which will have a great impact in the world of sport in general. The event will be held on 14 September 2008, on a circuit which uses a part of the oval and a new track designed in the infield.

Bayliss: I Have A Feeling Brno Will Be Difficult For Us

0

Brno (Czech Republic), Thursday 19 July: The Ducati Xerox Team arrive at the Automotodrom Brno for this weekend’s ninth round of the World Superbike Championship at the spectacular and notoriously difficult Czech Republic circuit in the forests around the town of Brno. Not only is the Automotodrom one of the most fearsome circuits on the calendar, but it also has a reputation of not being a particularly happy hunting-ground for the Ducati Xerox Team, which aims to set the record straight this weekend. The last round at Misano saw Bayliss step up his title defence with a double triumph that takes the 38-year-old Australian rider’s mid-season winning streak to three races. After zero points scored at Donington due to his nasty crash, Troy is now back within striking distance of championship leader James Toseland (Honda), who is just 21 points in front. Troy Bayliss, 2nd in championship (239 points) Testing one month ago saw Troy Bayliss just a fraction away from nailing a 2 minute dead time on a qualifying tyre in cool conditions, but he knows that conditions will now be a lot hotter now and that the fickle Brno track could easily play tricks on the twin-cylinder Italian machines. A DNF and an eighth place were the best results Troy could put together in a disappointing weekend in 2006 on his first Superbike visit to the circuit. “I have a feeling Brno will be difficult for us” declared Troy. “The reason is the track layout, the conditions, a bit of everything really. It’s going to be hot, we do struggle in those conditions and we don’t really know why. If we did, then we’d sort it but it’s not easy. We’re going there and we would like to win but honestly I think it’s going to be more difficult than that and we just want to keep the points as close as we can. Testing went pretty well three weeks ago, we were quick on a qualifying tyre, and we did a couple of race simulations but we didn’t exactly get what we wanted from the tests so we’ll just have to wait and see what conditions are like when we get to Brno. I remember last year Kagayama did a couple of great races so I’m hoping he does some more this year!” Lorenzo Lanzi, 6th in championship (133 points) The 25 year-old Italian has four races to his name at the Brno circuit, but his best result so far has been sixth place, which he scored twice in 2005. Lorenzo showed some signs of a mid-season revival at Misano but he now finds himself having to defend sixth place in the table from a fast-approaching Ruben Xaus. “Brno is a track that I like a lot” declared Lorenzo. “In testing we didn’t go bad, especially with the qualifying tyres, but on race tyres we were a bit further down the order. It’s a strange circuit for us because the track conditions change all the time and we seem to have more problems here than the others. Every day is different, but we hope to go there and have a more normal Sunday than what we have had in past years. We know that Brno is a track that creates problems for us, but judging by the results of the tests, I’m optimistic for this weekend even though conditions will be different”. Championship Points (after 8 of 13 rounds): Riders – 1. Toseland (Honda) 260; 2. Bayliss (Ducati Xerox) 239; 3. Haga (Yamaha) 234; 4. Biaggi (Suzuki) 217; 5. Corser (Yamaha) 182; 6. Lanzi (Ducati Xerox) 133; etc. Manufacturers: 1. Ducati 234; 2. Yamaha 277; 3. Honda 274; 4. Suzuki 233; 5. Kawasaki 102; 6. MV Agusta 1. The Circuit Name: Automotodrom Brno Length: 5.403 km Pole Position: left Corners Left/Right: 6/8 Finish line length: 636 m Race distance: 2 x 20 laps / 108.060 km Statistics : Best lap: Haga (Yamaha) 2m00.457s (2006). Lap record: Haga (Yamaha) 2m02.594s (2006). Superpole: Haga (Yamaha) 2m00.457s (2006). 2006 Results : Race 1: 1. Kagayama (Suzuki); 2. Toseland (Honda); 3. Fabrizio (Honda). Race 2: 1. Kagayama; 2. Fabrizio; 3. Haga (Yamaha). Race 2:

Steve Martin Has Stayed Busy Since Leaving The DFX Honda Team

0

Experienced motorcycle racer Steve Martin has been in demand for a variety of testing and commentary roles since his departure from the DFX Honda World Superbike team in mid May. His first role came in the form of being the guest commentator for the world broadcast feed for the World Superbike Championship from Silverstone, alongside veteran commentator Jonathan Green and fellow racer Scott Smart. Steve commented, “I was nervous as I hadn’t done anything like that before so you always worry that you’re going to sound like a dork! It’s the sort of job that when your Mum says you did ok you don’t know whether to believe her or not. I wasn’t sure about how I would find commentating but I actually really enjoyed it.” With glowing feedback from his co-commentators and also fans who emailed in to comment on Steve’s great thoughts and insights to the track action, the Aussie was invited to return to the microphone for the following rounds at San Marino in Italy a few weeks later and Brno in the Czech Republic this coming weekend. Steve continued, “Commentating at Misano was even more daunting than Silverstone as there was no Scott Smart, along with Jonathan and myself, to also fill in the gaps. But I ended up feeling very comfortable and the commentary flowed well between the two of us. I am really looking forward to doing Brno now as I think the racing there will be really close.” Although enjoying his stint and also increasing his experiences of commentating, Steve is still a gutsy racer at heart and his outstanding riding and bike development abilities were highlighted when a number of teams contacte Steve, asking him to test their race machines and provide his direction and input for development and set-up. “It felt good to be approached by a number of teams and whilst it would have been great to be able to follow up every option, that was not the most productive way forward for me or the teams,” explained the Aussie. “So I’ve ended up on a Yamaha theme really. Nothing planned but it’s just how it’s panned out. “I did a two day test for the Yamaha France World Superbike team at Lausitzring, alongside Nakatomi on their R1 customer bike which was a lot of fun and we achieved a great deal in a short space of time. The bike was pretty standard but I managed to lap with some respectable times and the guys were happy that I was able to give them some constructive feedback and a direction to head in with set-up going forward.” The Yamaha Europe World Supersport team were next to request the help of Steve’s expertise, asking him to test a number of new components on the R6 of Kev Curtain at Brno, alongside Broc Parkes. Steve continued, “The test went quite well and I was able to dip under the current lap record regularly, although the emphasis of the test was evaluating some new components and not really an ultimate lap time. That R6 is a really nice bike and still has a lot of potential to be unlocked, so I was happy to have been able to ride it again and have an input into that.” Steve then agreed terms to ride for Mandy Keinz Yamaha Austria racing team and will line up on the grid for the Suzuka 8 Hour race later this month. “I wasn’t really looking to do the ‘eight hour’, but Mandy kept ringing me and one day he caught me at the right time. I’m glad that he did in the end as it is a very experienced team. My son Axel is also happy about it too as Mandy promised to give him his first motorcycle – a Yamaha pw 50 of course – and Axel’s not even one yet!” Just when he thought things couldn’t get any busier, Steve received a call from Rob MacElnea asking if he would be interested to test the Virgin Yamaha R1 to evaluate its performance. “Out of all the bikes and teams that I have tested for this year, I was most impressed by what the Virgin Yamaha team have accomplished in terms of bike set-up and also team dynamics, and I clicked well with both elements,” explained Steve. “I only got to lap Donington for an hour during the lunch break of a track day, but it was enough to let me know that things just seemed to click, that the R1 was fast, steered well and looked good so had all the fundamentals of a good package.” “I’ve had a number of years experience motorcycle racing and have ridden every make of bike; two, three and four cylinders, Superbike, 500GP and Supersport. Given this I know how a bike should feel and what feedback a team needs in order to make the package work, so it’s been great that I’ve really been able to use my skills to experience over the last few months and also that they have been recognised and wanted by teams. Steve concluded, “I’m still not sure what I will be doing in the future. I don’t want to rush into any decisions and end up in another situation like at the start of this season. But I have options which is the positive thing and so I’ll need to assess these over the next few weeks and then I should be in a clearer position to make some decisions and update everyone with more news!”

Roger Hayden On Racing The U.S. Grand Prix: I’m Not Putting Too Much Pressure On Myself

0

After a mixed result at last week’s German Grand Prix at the Sachsenring, the Kawasaki Racing Team are preparing for the 11th round of the MotoGP world championship at Laguna Seca this Sunday in what will be a major event for the squad. Three 800cc Ninja ZX-RR bikes will be on the grid this weekend as American Kawasaki AMA Superbike and Supersport racer, Roger Lee Hayden, joins Randy de Puniet and Anthony West for the Californian showdown. The Laguna circuit is a complex amalgamation of twists and turns, with seven left and four right hand curves, coupled with some considerable climbs and drops, the most famous of which is the notorious Corkscrew: a sharp, steep and winding downhill corner, a true test of mettle for any Grand Prix rider. It all makes for a magnificent spectacle and the round is hugely popular with American crowds who come to party and support their numerous, homegrown heroes on the grid. De Puniet described his race here last year, his first ever at the circuit, as the hardest of his life as a blistering heat wave affected riders and track alike. It was so hot the recently laid track surface started to melt and the AMA support races were postponed. However, the Frenchman managed twelfth place, despite the sweltering conditions, and hopes to build on that experience this weekend. West, having come from the 250cc world championship, is a newcomer to Laguna Seca and is relishing the opportunity to learn the track and see what the Ninja is capable of around its 3.61km, or 2.243 mile, length. After making excellent progress since joining the team in June, the 26-year-old Australian hopes to add to his tally of 20 championship points, accumulated since the British Grand Prix at Donington Park. Meanwhile, Kawasaki’s MotoGP team welcome American Hayden to their ranks this weekend. Younger brother of current world champion, Nicky, Roger Lee has valuable experience and knowledge of Laguna and, having tested the ZX-RR in Japan earlier this month, is looking forward to seeing what he can do on it in Sunday’s race. It will be a tough number for Hayden, who will also compete in the AMA Supersport race on the same day, but no doubt he will enjoy plenty of support from the US fans to spur him on. Promisingly, the weather forecast is looking good, with lots of sunshine and agreeable temperatures, without the exhausting heat wave of last year. This should mean the hottest action will be on the track. Randy De Puniet Kawasaki MotoGP Pilot #14 “I’m still disappointed about the result last week but we had the speed, and did a good job of setting up the bike, so I’m feeling good for this weekend. I think it will be a hard race, though. Last year, it was difficult for me at Laguna: this track is like the Sachsenring in that it’s short and tight and the Corkscrew is an especially difficult corner. I need to improve at that section this weekend, because I wasn’t so fast there last year, but the bike and Bridgestone tyres should perform well and I think I’ll be able to get a good result. And it’s not as hot as in 2006, which will be better for the engine, for the tyres and for me! I like being in America, so I’m happy to be at Laguna, and I’m feeling confident and upbeat.” Anthony West Kawasaki MotoGP Pilot #13 “This is my first time in America, and I’m excited to be here, but obviously that also means it’s my first time at this track so it could be hard to learn it and still go fast. Still, I’m looking forward to the race: it’s something different for me and should be exciting. I’m a little bit more confident coming here after last weekend’s result at the Sachsenring but it’s still going to be difficult. I just need to learn as much of the circuit as I can before I get on the bike, although I normally learn tracks pretty quickly. When I rode in some Supersport races earlier this year, I hadn’t ridden any of those three tracks before but I still did OK, so hopefully I can do the same here. I don’t know if I can still improve my final position in the race this weekend, I’d need to get higher than eighth, but it’s different at Laguna as you don’t get the usual people up at the front, so it could be possible.” Roger Hayden Kawasaki MotoGP Pilot #95 “I’m really looking forward to riding the bike again at Laguna; it’s a track I know pretty well and I’ve had a lot of luck here in the past. This weekend’s a big challenge to learn more about the ZX-RR, and about riding in a top level race, but I don’t have any big expectations and I’m not putting too much pressure on myself. It should be a great weekend, though, as I always get lots of support from the fans in the AMA Superbike and Supersport races and I’m sure they’ll be cheering for all the Americans on the grid in MotoGP.”

Updated Reminder: Red Bull U.S. Grand Prix To Be Broadcast Live On FOX, July 22

0

As we reported on July 12: The reason the Red Bull U.S. Grand Prix at Mazda Raceway Laguna Seca doesn’t show up in program listings for SPEED Channel or CBS is, it’s being shown LIVE (5:00 p.m. Eastern/2:00 Pacific) on Fox, Sunday, July 22. Check local listings for the channel number in your area. SPEED Channel will broadcast the AMA races from Mazda Raceway Laguna Seca on July 22. The AMA Supersport race is scheduled for 6:00 p.m. Eastern Time and the AMA Superbike race is scheduled for 11:00 p.m. Eastern Time. SPEED will also have a one-hour show covering MotoGP Qualifying on Saturday, July 21 at 9:00 p.m. Eastern. So that makes a total of four hours of original motorcycle programming from Laguna. And this weekend’s World Superbike races from Brno will be on SPEED on Tuesday, July 24, the first race at 1:00 p.m. Eastern and the second race at 2:00 p.m. Eastern. World Supersport from Brno will be shown on SPEED on Tuesday, July 31. ~http://www.speedtv.com/schedule/index.php?m=07&d=22&ts=1185076800&timezone=0&subcat=&program=&usecal=yes~ More, from a press release issued by AMA Pro Racing: AMA RACING ON TV July 20-July 27, 2007 (All times Eastern) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Friday, July 20, 8 pm (MavTV) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Saturday, July 21, 2 am (MavTV) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Saturday, July 21, 8 pm (SPEED) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Sunday, July 22, 12 pm (MavTV) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Sunday, July 22, 5 pm (MavTV) AMA Superbike Championship presented by Parts Unlimited, Mazda Raceway Laguna Seca, Monterey, California AMA Supersport Championship presented by Shoei Sunday, July 22, 6 pm (SPEED) AMA Superbike Championship presented by Parts Unlimited, Mazda Raceway Laguna Seca, Monterey, California AMA Superbike Championship presented by Parts Unlimited Sunday, July 22, 11 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Lites Championships Tuesday, July 24, 3 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Tuesday, July 24, 9 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Lites Championships Tuesday, July 24, 10 pm (SPEED) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio – (GNC Twins Half-mile) Tuesday, July 24, 9 pm (MavTV) AMA Superbike Championship presented by Parts Unlimited, Mazda Raceway Laguna Seca, Monterey, California AMA Superbike Championship presented by Parts Unlimited Wednesday, July 25, 3 am (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Wednesday, July 25, 3 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Thursday, July 26, 3 am (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Lites Championships Thursday, July 26, 4 am (SPEED) Check local listings Subject to Change www.mavtv.com; www.speedtv.com

Where And When To Get Neil Hodgson’s Autograph, And Other Things To See And Do While At Laguna Seca

0

Corona Extra Honda Racing is pleased to confirm promotional and autograph signing sessions for riders James Ellison and Neil Hodgson at this weekend’s AMA Superbike and Moto GP event at Laguna Seca, Monterey. Come by to meet the team, the Corona girls get autographs and score Corona swag! CORONA PROMOTIONS RIDERS, SPOKESMODELS & CREW THURSDAY 7-19 BULLWACKERS CANNERY ROW START 7.30 PM, 90 MIN BRITANNIA ARMS ALVARADO ST. START 9.00 PM, 60 MIN FRIDAY 7-20 SLY McFLYS CANNERY ROW START 7.45 PM, 60 MIN MUCKY DUCK ALVARADO ST. START 9.00 PM, 60 MIN EVENT AUTOGRAPHING SIGNINGS RIDERS AND SPOKESMODELS FRIDAY 7-20 HOTBODIES VENDOR AREA START 2.30 PM, 30 MIN SATURDAY 7-21 HOTBODIES VENDOR AREA START 2.30 PM, 30 MIN HONDA HONDA TENT START 3.00 PM, 45 MIN HONDA RIDERS CLUB HRCA TENT START 3.45 PM, 30 MIN See Team display bikes at the following retailers in the Monterey region: ALBERTSONS, SAND CITY NOB HILL, S. MAIN SALINAS BOTTLES N BINS, MONTEREY 7-ELEVEN, CANYON DEL REY NOB HILL LIGHTHOUSE, MONTEREY ALBERTSONS, WATSONVILLE SLY McFLYS, MONTEREY BRITANNIA ARMS, MONTEREY CLUB OCTANE, MONTEREY More, from a press release issued by American Suzuki: Suzuki to Display Much-Anticipated 2008 Hayabusa and B-King Motorcycles at Red Bull U.S. Grand Prix at Laguna Seca BREA, Calif. (July 18, 2007) American Suzuki Motor Corp. (ASMC) will showcase two new 2008 motorcycles “” the Suzuki Hayabusa and B-King “” at the Red Bull U.S. Grand Prix at Mazda Raceway Laguna Seca in Monterey, Calif., July 20-22. This will be the first public showing of the recently announced high-performance bikes. “Tens of thousands of motorcycle enthusiasts attend this race every year, and Suzuki wanted to take this opportunity to give fans a first-time, up-close and personal look at the Hayabusa and B-King,” said Glenn Hansen, communications manager, ASMC, motorcycle/ATV division. “Both motorcycles have been highly anticipated by media and motorcycle enthusiasts alike, and this is the perfect opportunity to showcase Suzuki’s new flagship models.” The Hayabusa and B-King will be on display at the Suzuki booth, along with other 2008 models. Also at the booth, consumers can pick up a free special booklet, produced by Motorcyclist magazine, on the history of the Hayabusa and development of the new Hayabusa. Plus, Team Suzuki racers will be signing autographs. About the Hayabusa Suzuki’s world-renowned Hayabusa sportbike is new for 2008 with an aggressive and aerodynamic package with smoother bodywork and better air flow which still retains the signature Hayabusa character. The Hayabusa boasts updated features, such as optimum handling and braking performance, outstanding acceleration and new engine technology. It has a more muscular four-cylinder 1,340cc engine, a broader wave of torque for even more effortless acceleration and 12 percent more horsepower. The Hayabusa also features reduced emissions while still maintaining maximum overall performance. It’s the ultimate sportbike for the road. About the B-King First introduced as a Tokyo Motor Show-stopper in 2001, the B-King is a bold new machine that’s gone from concept model to production reality. The B-King takes new-millennium styling and design to the outer edges with its unique look and feel. But, the B-King isn’t just about style, it also has plenty of substance with a 1,340cc, four-cylinder, 16-valve DOHC fuel-injected engine taken from the new Hayabusa. It features superb handling and control, muscular torque and exhilarating throttle response, all wrapped in an advanced aluminum-alloy frame fitted with high-quality fully adjustable front and rear suspension and front disc brakes featuring radial-mount four-piston calipers. It’s the ultimate streetbike.

Updated Again: The Last Round Of Press Releases From Last Weekend’s Various Races

0

GO BIG’S GLENN 2ND, MILLSON SHINES DURING WET WEEKEND AT MOSPORT (Bowmanville, ON) Go Big Racing’s Paul Glenn increased his points lead to 17 points in the Amateur 600 Sport Bike Class of the Parts Canada Superbike Championship with a 2nd place finish this past weekend at Mosport International Speedway, while Ross Millson had a up and down weekend, with mechanical issues in the Pro 600 Sport Bike Class, but continuing his strong rookie campaign in the Pro Superbike Class with a 13th and 11th place finish. Much like the doubleheader round in Calgary, the weather once again washed out qualifying for the International Motorcycle SUPERSHOW Amateur 600 Sport Bike class. The grid was set by practice times and Keene, Ontario native Paul Glenn once again started 5th. Glenn quickly worked the No. 79 Go Big Racing machine up to 2nd and had inherited the lead on lap 5 when both riders who were ahead of him crashed in turn two and three. The race was red flagged at this point and it was determined that even though the No. 741 of Yanick Goudreault had been involved in a crash, he was not the rider that caused the red flag and was leading the race heading into lap 5, therefore he was declared the winner. “When the red flag came out I was in the lead and figured that we would be getting ready for a restart” commented Glenn after the race “I was disappointed that they awarded the win to the No. 741 even though he was involved in a crash, but we will take the points and begin to prepare for the next round in Nova Scotia.” Rounding out the top 3 in the AM 600 was Israel Johnas of Oak Lake, Manitoba. The weekend did not start out well for Hamilton, Ontario native Ross Millson. On Friday, Millson suffered mechanical issues on his No. 39 Suzuki GSX-R600 in preparation for the two Pro 600 races scheduled during the doubleheader weekend. Focused solely on the Pro Superbike Class, Millson put in strong performances in both races. Due to weather conditions on Saturday, the first race was pushed to Sunday morning and under clear skies, Millson finished with a 13th place finish after qualifying 19th. The afternoon session was once again affected by weather as the 5th round of the Pro Superbike Class was run under very wet conditions. Millson showed that wet or dry, he is becoming more comfortable on his Suzuki GSX-R1000 moving up five positions and finishing a solid 11th. “Even though the track was wet and I was still hurting from crashes earlier in the year, I knew that we had some of our sponsors out watching and I wanted to put in a good showing for the folks at JD Graphics and Infinet Designs as they have been great supporters of Go Big Racing” said Millson of his performance over the weekend. In other Go Big Racing news, Joshua Smith-Moore and Steven Green (both from Knoxville, TN) filled in admirably on the Go Big Racing No. 79 Suzuki SV650 during Round 5 of the SunTrust Moto-ST Endurance Series at Iowa Speedway in Newton, Iowa, finishing in 4th place in the ST class. Due to their prior commitment to the Parts Canada Superbike Championship at Mosport, Millson and Glenn needed the duo to compete in Iowa and ensure that Go Big Racing would still be in the hunt for the Championship heading to Daytona in October. “We really appreciated the guys stepping in and taking over the bike this weekend” commented Millson “without their help, we would not have been able to protect our 2nd place standing heading into the 8 hours of Daytona, where anything can happen. We also want to thank Team Zyvax for their support throughout the weekend.” Next up for Go Big Racing is Round 4 of the R.A.C.E Super Series at Shannonville Motorsport Park from July 20 22, 2007. The Parts Canada Superbike Championship resumes August 9 12, 2007 with Round 6 being held at Atlantic Motorsport Park in Shubenacadie, Nova Scotia. More, from a press release issued by WERA Motorcycle Roadracing: Jensen and Palmer Dominate in WERA Nationals at Grattan BELDING, Mich. Robert Jensen and Jason Palmer were the riders who left Grattan Raceway with the most trophies following last weekend’s WERA National Series event, which included a water-logged Bridgestone National Endurance race and the Michelin National Challenge sprint races. Round five of the endurance series was a battle against both competitors and Mother Nature, with rain falling for four of the six hours on Saturday. The nasty weather was no deterrent for Vesrah Suzuki, who won by six laps with Tray Batey, Chris Ulrich and John Jacobi on a Suzuki GSX-R1000. Dane Westby and Dustin Meador rode a Kawasaki ZX-6R to a finish of second overall, giving Team Westby the Mediumweight Superstock win. Unfortunately, Westby crashed 40 minutes into the sixth hour, bringing out the red flag and an early end to the race. Suzuki Rider Development’s Reuben Frankenfield, Mark Junge and Russell Wikle were third overall and first in Mediumweight Superbike on a Suzuki GSX-R600. The team was on the same lap as Team Westby and in contention for second overall. The Heavyweight Superstock win went to 5150 Racing. Justim Marm and Phil Caudill rode an MV Agusta R312, holding off several other teams who were on the same lap at the end. Bad Rad Racing II won the Lightweight Superbike class with Joe Schoch, Aaron Aaronson and Tristan Koeneker riding a Suzuki SV650. Once Saturday’s rain was over, the sun came out and racing conditions were ideal for Sunday’s National Challenge Series sprints. Robert Jensen was the top expert of the day, winning Open, 600 and 750 Superstock. Tray Batey and Dane Westby each took two expert wins. Batey’s came in Heavyweight Twins Superstock and a hard-fought Formula 1. Westby won Lightweight Twins Superstock and Formula 2. Tommy Aquino won 600 Superbike expert, and Matt LaPham won 750 Superbike. Jason Palmer upset Russell Wikle’s win streak in the novice division, winning 600 and 750 Superstock as well as 600 and 750 Superbike. Wikle got his turn to win in Open Superstock. In the other novice races, Andy Taylor won both Lightweight Twins Superstock and Formula 2. Alja Hessami won Heavyweight Twins Superstock. The WERA National Series begins the second half of the season with round six at Summit Point Raceway from August 3-5. More information about WERA can be found online at www.WERA.com. More, from a press release issued by Team Moe’s/TVR: Team Moe’s/TVR Second in Heavyweight Superstock Amid Storms at Grattan BELDING, Mich. Team Moe’s/TVR learned the true meaning of endurance racing during last weekend’s round five of the WERA National Endurance Series at Grattan Raceway. An abbreviated roster, only one dedicated pit crew member, rain and more set the tone for the six-hour race, but Team Moe’s still came away with second in Heavyweight Superstock. Chuck Ivey and James Stroud had to share the riding duties on the team’s Yamaha YZF-R1, with Josh Day still recovering from his rough weekend two weeks ago at Road Atlanta. There was little time for setting the bike up prior to the race, but with steady rain falling at the green flag, the strategy was more about survival than speed. Ivey started the race, and with the slowed pace on the slippery surface, his first stint lasted nearly two hours before the team brought him in. Stroud took over after that, but shortly before the end of his stint the black flag came out for the Team Moe’s Yamaha. A rear brake line bracket had come loose, grinding against the wheel and creating smoke. After getting checked out by a course worker, Stroud was allowed to head to the pits for repairs and his scheduled pit stop. The team switched from the rain tires to DOTs and Ivey took over for his second stint. The unlikely mishap set the team back, but when the track dried with two hours to go Ivey began making up time on Heavyweight Superstock leader 5150 Racing. Ivey made one more stop to give the bike back to Stroud who would finish the race. Stroud continued to make up ground but a red flag ended the race 40 minutes prematurely. Team Moe’s had closed to half a minute behind 5150. “It was treacherous in the rain, but we started moving up when it began to dry,” said Stroud. “We would have liked to win, but it wasn’t our weekend. A restart would have given us a 40-minute heads up sprint race against 5150. It would have been close.” Chris Cutright was the sole pit crew for the day, and Ivey and Stroud had to pitch in to assist with refueling and tire changes. Luckily, Dalke Motorsports was willing to lend a hand. “Dalke had a skeleton crew, too, and we were able to help each other with stops,” said Cutright. “I was never not doing something during the whole six hours. It was hectic, and the rain didn’t help things.” Ivey was optimistic about the team’s second in class and seventh overall result. “Even with a shortage of help in the pits and only two riders, we still fared well,” he said. “This gives us the motivation to be well-prepared for the next round and ready to win.” Fans can follow Team Moe’s quest for the Heavyweight Superstock title at www.TeamVelocityRacing.com. More, from a press release issued by Dalke Motorsports: Rain, red flags and attrition, big issues at Grattan Raceway for the 5th race in the WERA-AMA National Endurance Series. Dalke Motorsports woke up to a cold rainy day at the Belding, Michigan track and had their Interstate Yamaha R6 in the top ten and second in class until a brake pad bound up in the caliper. The team lost a 2 laps and a few positions but managed to claw their way back to 6th overall and third in class. Red flags bunched everyone up again as things started to dry out. Dalke was looking like a lock for third in class and possibly a top five overall until a brake pad hung again. The crew decided to change brake systems from the back-up bike in an effort to eliminate any future problems. During the switch air got into the back-up system and cost valuable time getting the air out. The Dalke riders really got to work and tried to make up as much time as possible in the dry conditions and had actually picked up one lap before the first in class team and the third in class team crashed together. With 45 minutes to go, this crash brought out the last red flag of the day as WERA Officials called the race. Dalke Motorsports had to settle for 4th in class and 12th overall as the race was cut short. We will be doing some homework in anticipation for the next round at Summit Point Raceway. This finish moves Dalke to 3rd in class and 7th overall. More, from a press release issued by Team Amadeus X: Good Progress but Bad Luck in Croatia Alpe Adria Endurance Series, Round Two, Rijeka Amadeus X One fail to finish after technical problems Ahead of the second round of the Alpe Adria Endurance series, Team Amadeus X One had been hoping to repeat the success of their first round victory at Rijeka in May, but it was not to be. The weekend turned out to be completely different for the Tuscan team; despite improving their speed with new rider Nico Morelli, unexpected technical problems compromised their final result. Young Italian Morelli, who usually competes in the Amadeus colours on a Yamaha R6 in the Italian Championship, left everyone stunned with his debut performance on a 1000cc superbike, recording the third fastest time in qualifying. The team, which also comprised regulars Tessari and Ricci, was therefore confident before the start of the race, but after just 30 minutes handling problems forced Tessari to pit. With the 200-mile race compromised, the team used the rest of the meeting as a series of tests ahead of the Suzuka 8 Hours race on 29th July, which will see Riccardo Ricci and Paolo Tessari share the riding of the Amadeus X One Yamaha YZF-R1. Will Gruy’s recovery and convalescence is continuing and he will now return to racing for the Oschersleben 24 Hour race on the 11th/12th August. Morelli will be reserve rider for this race. More, from a press release issued by Team EMGO USA: Team EMGO USA’s Chris “Opie” Caylor had a successful weekend, this past weekend, at Grattan Raceway Park in Belding, Michigan. A track Opie hadn’t laid eyes on since competing in a WERA National Endurance Race there, back in 1998. Opie had this to say, “It took me a few sessions before I was able to forget about the bumps and just ride. I really enjoy the layout of the track, it just needs to be repaved.” Opie went out for Formula One qualifying friday afternoon and took his EMGO-sponsored, Dunlop-shod Suzuki GSX-R1000 to 7th on the grid. Afterwards, Caylor said as tight and technical as Grattan is, he would use his GSXR 750 for Open and 750 Superstock qualifying. In Open Superstock, Opie qualified 7th again but, used the session to improve the bikes setup. Team EMGO USA mechanic Shane Giguere made some changes in between the sessions and sent Opie back out for 750 Superstock qualifying. The changes worked and Opie qualified 2nd in 750 Superstock at a 1:20.2 but, still almost a full second behind polesitter Robert Jensen. “I feel like the key to this place is just making the bike go over the bumps. We made some changes and things got much better, we’ve just got to keep working in that direction”, said Caylor. To better prepare himself for the teams main focus, the 750 Superstock Class, Opie raced his GSXR 750 in the Open Superstock race. At the drop of the green flag, Opie went from the 3rd row to third place going into turn one. Unfortunately, lap after lap, one more of the bigger 1000cc bikes would just manage to get past on the long front straightaway. Opie turned his best lap yet, a 1:20.0 in route to a 7th place finish. During that race, Opie came up with a few more idea’s on setup. Shane made the changes and then it was time to go right back out. In 750 Superstock, Opie again got a great start and followed Robert Jensen into turn one. The two distanced themselves from the rest of the field as they engaged in their own private battle. Opie stuck to Robert but couldn’t find an immediate way past. A few laps in, Jensen ran a little wide going into turn one and gave Opie just enough room to pounce. Now into the lead, Opie took control and worked on holding Jensen off only to make the same mistake in turn one that Jensen did earlier. Jensen repassed Opie and the battle continued. On the last lap, the two came upon a lapped rider and Jensen got past cleanly while Opie didn’t. Opie would have to settle for second. ” That was a good race! Runing the 750 in the Open Superstock race was a big plus. I went a full second a lap faster in the 750 race than I did in the Open race. I am a bit disappointed though, I had him! I just got into one that one lap a little too hot and it just gave him enough room to get back by. I thought I had another shot at him but he got by a lapper at a great spot for him and the worst spot for me, so I finished 2nd.” In Formula One, after another one of his great starts Opie piloted his Suzuki GSXR 1000 to an uneventful 6th place and had this to say afterwards, “Overall, it was a decent weeekend. I am somewhat pleased with the 750 results and the 1000 continues to improve. We just gotta keep building!” More, from a press release issued by Kawasaki Canada: KAWASAKI TEAM FACE TRIUMPHS AND TRIBULATIONS AT MOSPORT A dry summer in southern Ontario came to a halt this past weekend as cool weather and rain hit the track at Mosport International Raceway for rounds four and five of the Parts Canada Superbike Championship. Despite the weather, 2006 Double Canadian Champion Jordan Szoke was able to take two of a possible four wins for the Canadian Kawasaki Factory Road Race Team. The forth round also brought with it a first for Szoke’s teammate, Brett McCormick who clinched his first podium in the Superbike Championship in just four weekends. The Yoshimura Pro 600 Sport Bike round held on Saturday was less then desirable for the riders as the conditions were extremely tricky. In fact, it took considerable time to complete the race but when the checkered flag waved, it was the Kawasaki ZX-6R of Szoke who crossed the line first. The Brantford Ontario native put on a spectacular display to get to the front. During the race, Szoke crashed in the entry to Moss corner but was able to take advantage of a race stoppage to remount and return to his pit. The entire Kawasaki team was involved to get Szoke and his ZX-6R back on the grid before the restart of the race. Unfortunately, Jordan had to restart from the back but from there the 28 year old sliced through the pack, needing just five laps to go from last to first. “When I restarted the race, I thought the track is slippery, let’s just score some points. If I can get a top five, I’d be happy. Soon after that I found myself battling for the lead.” Due to the conditions Saturday afternoon, the first of two Superbike races were postponed to Sunday morning. By then the weather had cleared and under sunny skies Szoke, aboard his Kawasaki Ninja ZX-10R, captured his 4th straight win of the season after a last lap pass for the lead. For McCormick, after running a strong 4th during the event, the news that McBain had been penalized for a jump start came as a fantastic surprise as it now placed him in 3rd position. In just four races, McCormick has become a solid force in the Parts Canadian Superbike series and he was elated to earn his first Superbike podium. “I had a great battle with Kevin Lacombe for most of the race. I thought I finished 4th and didn’t find out about McBain’s penalty until I got into the pits. I was thrilled. The ZX-10R is a great bike and getting both Jordan and myself on the podium shows how awesome the team is!” Kawasaki Team Manager Jeff Comello was just as pleased with his rookie rider. “After all the speculation that a 15 year old couldn’t handle the intricacies of a Superbike, Brett was able to prove the critics wrong. He’s been running extremely well this season.” Round five of the Superbike Championship and the Pro 600 final were not as kind to the Kawasaki team. The afternoon Superbike race was yet again forced to run in inconsistent wet conditions. While in 3rd, Szoke crashed sliding off the slick track just behind his ZX-10R but without losing a beat, he jumped up, restarted his battered bike and was off managing to salvage a 7th place finish. McCormick, who had never been in a wet race aboard the ZX-10R, paced himself finishing a solid 6th. In the second Pro 600 race of the weekend, the results were extremely frustrating for the team. While running in 4th, McCormick crashed in turn 3 and would end up crossing the line 12th after remounting. As for Szoke, his race was almost as heartbreaking. According to Comello, “Jordan was working his way forward in the lead pack when he experienced an electrical gremlin and was forced to retire. It’s hard to take weekends like this one. The team and our riders are working very hard and sometimes things just don’t go as planned. But we did manage to maintain our lead in both championships and I know Jordan and Brett are going to be very determined to make a point at Shubenacadie.” The Canadian Kawasaki Factory Road Race Team are eagerly awaiting round six at Atlantic Motorsport Park in Shubenacadie, Nova Scotia (August 9th-12th) to get back in action. For the latest series information, visit kawasakiracing.ca and cdnsuperbike.com. In addition, all seven races on the will be broadcast on TSN and RDS. More, from a press release issued by USGPRU: Iso and Ferris claim victory at Portland ODENTON, MD – July 3, 2007 – The USGPRU welcomed Eric and Ben Bostrom for the first Apex Academy session last weekend at Portland International Raceway. The Boz Brothers sat down with the USGPRU riders on Friday and provided tips on track analysis, nutrition and training, and how to work with sponsors and fans. “It was an awesome experience. I couldn’t believe they came to help us out!” exclaimed 125GP rider Tyler Odom after the final session. Riders of all ages were present during the lessons, which were held between practice sessions in the Red Bull Pinzgauer tent. Everybody walked away with several ideas of how to prepare for a race, run the race, and how to present themselves before and after the race. The riders took the lessons tought by the Bostrom Brothers out to the track on Saturday. The Rising Sun Cycles 125GP qualifier saw hometown hero Nobi Iso throwing down a fast lap of 1:13.817, with Elena Myers and Benny Solis Jr. pulling down the second and third-fastest times, respectively. Newcomer Ryan Matter crashed during qualifying and broke his leg, but only after capturing the 4th fastest qualifying time. The 250GP qualifying session foreshadowed the spectacular race on Sunday with only a half-second separating the top four positions. Ryan Ferris captured pole position with a 1:12.056, followed quickly by Canadian Eddy Brunet (1:12.264), Vince Rolleri (1:12.590) and Kyle Ferris (1:12.605). The Sunday main events saw Nobi Iso doing battle with Elena Myers throughout the entire race. Elena was within a wheel of Nobi on several blasts down the front straight, but Nobi’s Aprilia was able to hold the youngster off to claim the crown. Benny Solis Jr., Tyler Odom and Royce McLean each ran somewhat lonely races, with almost a full second separating each of the riders. The battle for 6th place became heated by the fourth lap, with Jeff Lim and Michael Caravatta swapping spots several times throughout each lap. Lim ended up with an at-the-line victory to hang onto 6th place. The 250GP race was stopped early on with the red flag coming out on the first lap after Tyler Odom high-sided his machine in “spectacular fashion” according to the closest corner worker. Although Odom was unhurt, he was unable to make the restart, which saw Ryan Ferris, Vince Rolleri and Eddy Brunet immediately start a voracious 3-way battle for the top spot. Brunet led the first lap, but Ferris and Rolleri eventually overtook him. Ferris was barely able to hold off Rolleri, their bikes nearly side-by-side at start/finish almost every lap. Brunet hung back just a couple of bikelengths, possibly hoping that the top two would take each other out at some point during the 15-lap race. Kyle Ferris and Dylan Olsen were in the mix as well, battling for fourth. Turn 8 was ultimately the downfall for Rolleri, who low-sided near the end of lap 10, handing the lead to Ryan Ferris. Brunet, Olsen and Kyle Ferris were able to avoid the turn 8 wreckage to complete lap 10, but Olsen brought out another red flag with a crash in turn 4, ending the race. It was truly an impressive battle, with Ryan Ferris throwing down the fastest lap of 1:10.671 and claiming the win. The USGPRU would like to thank Eric & Ben Bostrom for participating in the first round of the Apex Academy, as well as Ron Trunick’s Red Bull Team, Kevin from Bob Lamphere¹s Beaverton Yamaha, the OMRRA staff and volunteers, the corner workers and medical staff for their hospitality and assistance throughout the weekend. The next USGPRU West Coast round is August 25-26 at Miller Motorsports Park in Tooele, Utah. 125GP Race Results: 1. Nobi Iso ­ 2003 Aprilia RSW125 2. Elena Myers ­ 2007 Honda RS125 3. Benny Solis Jr. ­ 2004 Honda RS125 4. Tyler Odom ­ 2002 Honda RS125 5. Royce McLean ­ 2006 Yamaha TZ125 6. Jeff Lim ­ 2000 Honda RS125 7. Michael Caravatta ­ 1997 Honda RS125 8. Kevin Murray ­ 2006 Yamaha TZ125 9. Phill Krenn ­ 1998 Honda RS125 10. Shellie Matthews ­ 1998 Honda RS125 250GP Race Results 1. Ryan Ferris ­ 2001 Honda RS250 2. Eddy Brunet ­ 2000 Honda RS250 3. Kyle Ferris ­ 1993 Honda RS250 4. Pete Ross ­ 1995 Yamaha TZ250 5. Thomas DiNardo ­ 2005 Yamaha TZ250 6. Elena Myers ­ 2007 Honda RS125 7. Kurt Husted ­ 1996 Yamaha TZ250 8. Dale Murphy ­ 1999 Yamaha TZ250 9. David Matthews ­ 1996 Yamana TZ250 10. Shellie Matthews ­ 1998 Honda RS125 11. DNF crash ­ Dylan Olsen 12. DNF cras ­ Vince Rolleri 13. DNF mechanical ­ Mike Stubbs 14. DNF mechanical ­ Daniel Qualtire 15. DNF crash ­ Tyler Odom

Rizla Suzuki Looking To Keep Momentum Rolling At This Weekend’s BSB Round At Mallory Park

0

The last time Chris “Stalker” Walker raced at Mallory Park was in the 2006 Race of the Year when he took victory and secured his seat with Rizla Suzuki. Returning to the 1.41-mile track for the ninth round of the Bennetts British Superbike Championship this weekend there’s nothing he’d like more than to top the podium again. “I’ve always liked Mallory Park as it is one of my home tracks and I’ve won quite a few times there in the past,” said Stalker. “It’s also a circuit we have tested at earlier in the season and will start with a direction and idea how we want to set-up my Rizla Suzuki. “I’m happy with achieving another podium at Oulton Park last weekend and think there is a bit of momentum with the team. We all want to get back on the rostrum so much you can taste it. We’ll be going for it at Mallory.” Rizla Suzuki’s Cal Crutchlow, from nearby Coventry, also counts Mallory Park as a home round. He took a career best BSB result with fifth place in the opening race at Oulton Park last weekend and is on top form. Crutchlow said: “My Rizla Suzuki is improving very quickly and we will make more progress this weekend. Every time we go out on the bike we develop it a little further, learn more and become more competitive. “I’ve achieved my season goal of getting in the top six and now I’ll concentrate on repeating that and if possible, going for a podium or two. That’s the performance I need and the whole team wants – and in fairness, I think we are capable of and deserve.” Rizla Suzuki Team Manager Simon Buckmaster is upbeat. He said: “The hard work and graft the team is putting in is starting to pay off. Chris and Cal enjoyed their season best results at the last round and the performance we have been building all season is now starting to show. We are re-energized for Mallory Park and the target for Chris is to take a step up the podium and Cal to get on it himself.” Superbike racing starts at 1300 on Sunday, July 22nd, at the twisty historically Leicestershire circuit.

A Preview Of The Suzuka 8 Hours, Which Is Scheduled For July 29

Australia’s Damian Cudlin will head to Japan ready to fight back into championship contention with a strong result firmly in his sights. Returning to the most prestigious single motorcycle event for a 3rd time, Cudlin believes he and the YART squad stand a strong chance for success not only towards the championship, but for overall honours as well. “This will be my 3rd time racing at Suzuka so obviously I’m going into this event better prepared than I’ve been in the past.” Cudlin said. “It’s a huge test of fitness in the humidity of Japan, and a place where you can gain a lot by being in good shape. I’m heading to this event lighter and physically fitter than before, and I think it’ll pay off.” Cudlin’s Yamaha Austria Racing Team has a proven track record in Japan, finishing in the top 10 outright twice in the last two visits, including taking the SBK class victory last year. This year they will be flying the flag for Yamaha’s European assault and will be looking to continue their string of strong results in the Mecca of Motorcycle Races. “YART have always had good results at Suzuka and it’s always been an important race in the championship.” said Team Manager Mandy Kainz. “It’s hard to compete with the Japanese at Suzuka with our European stuff, but we’ve often done the best job of the permanent teams which is important for our championship hopes. This year we hope to move forward in the series standings and gain a strong result for Yamaha.” Cudlin, who will ride alongside regular team mate Igor Jerman, will also be joined by fellow Aussie Steve Martin, who will replace the still injured Sebastian Scarnato. “It’s great to know we’ll have a rider of Steve’s calibre joining us in Suzuka.” Cudlin said. “I’m sure his experience riding so many different bikes in WSBK will help us get the most out of the YART R1, and being a Suzuka veteran himself I’m sure he’ll prove to be fast as well. It can only be good for our team, and I’m looking forward to working with him.” The Suzuka 8 hour will be run on the 29th of July.

Details On The Changes To The Superbike World Championship Technical Rules For 2008

2. TECHNICAL REGULATIONS (TO BE APPLIED AS FROM 01.01.2008) 2.1 INTRODUCTION 2.2 CLASSES 2.3 GENERAL ITEMS 2.3.3 Handlebars 2.3.4 Control levers 2.3.5 Wheel and rims (See Table 1) 2.3.6 Tyres 2.3.8 Adaptation of the tyre’s surface 2.3.9 The use of tyre warmers is allowed. 2.3.10 Use of Tyres The competitors shall only use tyres distributed by the Official Supplier during the event. For each event, all tyres must be made of the same quality and shall be strictly identical. All tyres to be used must be easily identifiable with a colour marking or a numerical system, to be applied by the Official Supplier at the time of manufacturing. The Official Supplier shall provide the Superbike Technical Director a written description of the markings and the general characteristics of the different types of tyres. After the tyre samples have been delivered to the Superbike Technical Director the day prior to the start of the official practice, any modification of the tread pattern (with the exception of normal wear) is not permitted. During free practices, qualifying practices, (Superpole for Superbike), warm up session (and race for Superstock), no motorcycle may enter the track without the front and rear tyres being marked (see also Art. 2.4.6.7/ 2.5.6.7/ 2.7.6.7). The Superbike Technical Director may, at his discretion, require the exchange of one (1) or more competitors’ tyres for a tyre sample under his control. The tyres exchanged remain under his control and he can exchange them for the ones of another competitor. An appropriate identification will be applied on the left side of each tyre. No tyres marked for one event may be used during another event. When indicated (see Art. 2.4.6.7/ 2.5.6.7/ 2.7.6.7), no unmarked dry-weather tyres are allowed in the pits. 2.3.11 Ballast The ballast must be made from solid metallic piece/s, firmly, securely connected, either through an adapter or directly to the main frame or engine, with minimum 2 steel bolts (min. 8 mm diameter, 8.8 grade or over). Fuel in the fuel tank can be used as ballast. Nevertheless, the verified weight may never fall below the required minimum weight. 2.4 SUPERBIKE TECHNICAL SPECIFICATIONS Rules intended to give freedom to modify or replace some parts in the interest of safety. EVERYTHING THAT IS NOT AUTHORISED AND PRESCRIBED IN THIS RULE IS STRICTLY FORBIDDEN. Superbike motorcycles require an FIM homologation (see Art. 2.9). All motorcycles must comply in every respect with all the requirements for road racing as specified in the Technical Regulations, unless it is equipped as such on the homologated machine. The appearance from both front, rear and the profile of Superbike motorcycles must (except when otherwise stated) conform in principle to the homologated shape (as originally produced by the manufacturer). The appearance of the exhaust system is excluded from this rule. 2.4.1 Engine configurations and displacement capacities The following Engine configurations compose the Superbike class. Homologation Year, Homologation valid for, Engine configuration and displacements, Minimum weight, Diameter of restrictor Until 2006, 5 years, Over 750 cc up to (included) 1000 cc 2 cylinders ** (1000 cc 2 cylinders), 162 kg, n/a (*) As from 2006, 5 years, Over 750 cc up to 1000 cc 3- cylinders and 1000 cc 4 cylinders **(1000 cc 3 & 4 cylinders), 162 kg, n/a (*) As from 2008, 5 years, Over 850 cc up to 1200cc 2 cylinders **(1200 cc 2 cylinders), 168 kg, 50 mm (*) n/a = not applicable (**) Reference used in the Articles hereunder The displacement capacities must remain at the homologated size. Modifying the bore and stroke to reach class limits is not allowed. 2.4.2 Balancing various motorcycle concepts In order to equalize the performance of motorcycles with different engine configurations, changes in the minimum weight and air restrictor sizes are applied according to their respective racing performances. These handicaps are applied only to the ‘1200 cc 2 cylinder’ machines homologated as from 01.01.2008. At first, a weight handicap is applied according to the relevant provisions in Art. 2.4.2.2. The minimum weight may be reduced twice by 3 kg to a maximum reduction of 6 kg, or increased once and by 3 kg maximum. If this measure proves to be insufficient, then a second handicap will be applied: the size of the intake ports will be changed by means of air restrictors. These changes to the size of the air restrictor diameter will be applied in 2 mm steps, according to the relevant provisions described in Art. 2.4.4.3. 2.4.2.1 Minimum Weights The minimum weight will be: 1000 cc 2- cylinders 162 kg 1000 cc 3 & 1000 cc 4 cylinders 162 kg 1200 cc 2 cylinders 168 kg (**) (**) See handicap rule for further information. During the final inspection at the end of each race, the machines chosen will be weighed in the condition they finished the race. The established weight limit must be met in the condition the machine has finished the race; nothing can be added to the machine. This includes water, oil, or fuel. During the practice and qualifying sessions, riders may be asked to submit their motorcycle to a weight control. In all cases, the rider must comply with this request. At any time of the event, the weight of the whole machine (including the tank and its contents) must not be less than the minimum weight with a tolerance of 1 kg. The use of ballast is allowed to stay over the minimum weight limit and may be required due to a handicap system. The use of ballast and weight handicap must be declared to the Superbike Technical Director at the preliminary checks. 2.4.2.2 Minimum weight adjustments The minimum weights will be increased or decreased in steps of 3 kg according to the following procedure: 1. By taking the race points of the riders of the best two 1000 cc 4 cylinders and best two 1200 cc 2 cylinders in each race an average will be calculated after every event, the ‘event average’. If there is only one finisher from one of the configurations, the ‘event average’ will be calculated from the first rider of each configuration in each race. No ‘event average’ points will be calculated if one of the configurations has no finishers. The ‘event average’ will then be calculated, based on the results of the other race from the same event. If neither race has any finishers from one of the configurations, the event will not be considered. 2. ‘Wet’ races (as declared by the Race Director) are not taken in account for the calculation of an ‘event average’. 3. After 3 events, the average value of the ‘event averages’ of each configuration will be calculated. The score of the 1000 cc 4 cylinders and the score of the 1200 cc 2 cylinders will be compared as follows: · Should the average value of the ‘event averages’ over 3 events favour the 1200 cc 2 cylinders by more than 5 points, and if a rider of a machine with this configuration is leading the riders’ Superbike World Championship standings at that time, then the minimum weight of all 1200 cc 2 cylinders will be increased by 3kg. The upper limit is 171 kg. · Should average value of the ‘event averages’ over 3 events favour the 1000 cc 4 cylinders by more than 5 points, and if a rider of a machine with this configuration is leading the riders’ Superbike World Championship standings at that time, then the minimum weight of all 1200 cc 2 cylinders will be reduced by 3 kg. The lower limit is 162 kg. If the minimum weight is not updated, then the results of three more events will be considered, and a new average value of the ‘event averages’ will be calculated over six events and so on, over multiples of three events, until the points gap of the average value of the ‘event averages’ from the last minimum weight update is higher than 5. The Superbike Technical Director will inform all the teams about the possible minimum weight adjustments, within 24 hours from the end of the last event (the last meeting of the International Jury) where the average value of the ‘event averages’ was calculated. The new minimum weight adjustments must be applied from the first following event. 2.4.2 Carburation Instruments 2.4.4.1 For 1000 cc 2 cylinders · Carburation instruments refer to both throttle bodies and carburettors. · Carburation instruments must be used un-modified either as the original homologated carburation instrument or as the homologated optional carburation instrument. · The only modifications allowed to the homologated carburation instruments original or optional are jets, needles, throttle valves, fuel injectors and bell mouths. · Variable-length carburettor/fuel injection intake tract devices that function while the engine is operating are prohibited, unless such a system is used on the homologated machine · The original manufacturer must use the following criteria for the designing and making of the optional homologated carburation instruments. a) There is no limit for the intake size of an engine equipped either by carburettors or fuel injection systems. b) The optional carburettor / injector body material must remain the same as used on the original homologated carburation instruments. c) A minimum number of optional carburation instruments must be available as spare parts and be included in the manufacturer’s racing parts lists. All manufacturers must have a minimum of 15 sets available through traditional distributorships worldwide for the life of the homologation. The price of the optional carburation instruments to the public must not exceed twice the manufacturers suggested retail price of the original homologated carburation instrument in the country of origin. This price must be indicated on the Homologation Form. d) The motorcycle manufacturer may submit only one optional carburation instrument for each model at the time of homologation. e) The motorcycle manufacturer must supply a sample set of the original and optional carburation instruments to the FIM for use as comparison samples at the events. f) The motorcycle manufacturer must provide evidence that the minimum of 15 sets of optional carburation instruments have been manufactured. g) The optional carburation instruments must be available for at least three years after the homologation date. h) The carburation instrument homologation will be valid for the same period as the homologated motorcycle. i) An additional model of optional carburation instruments may be homologated during the life of the machine’s homologation. These carburation instruments must meet the same requirements as the original modified instruments. This is to allow development after the original homologation. · The optional carburation instruments may only be homologated at the same time as a new homologation. [see number i) above for additional optional carburation instruments] 2.4.4.2 For 1000 cc 3 & 4 cylinders and 1200 cc 2 cylinders · Carburation instruments refer to both throttle bodies and carburettors. · The original homologated carburation instruments must be used un-modified. · The use of optional homologated carburation instruments is not allowed. · The fuel injectors may be replaced, however they must fit without modification to the homologated throttle body. · The carburation instruments intake insulators may be modified. · Bell mouths may be altered or replaced. · Variable length intake tract devices that function while the engine is operating are not allowed, unless such a system is use on the homologated machine. · Vacuum slides may be fixed in the open position · Secondary throttle valves and shafts may be removed or fixed in the open position and the electronics may be disconnected or removed 2.4.4.3 Air restrictors for 1200 cc 2- cylinders Definition: An air restrictor is a metallic device with precisely 3 mm (+/-0.1 mm) of constant controlled section and which is placed in the induction tract after the carburation instrument (throttle body). No air and/or air-fuel mixture to the engine must by-pass the restrictor. No carburation part (injector, needle, slide, etc) must extend through the restrictor. Application: Only the 1200 cc 2 cylinders will be fitted with air restrictors. The initial air restrictor size to be installed is equivalent to a Ø 50 mm circular area (1963,5 mm2). Air restrictor size will be adjusted (in steps equivalent to a change of 2 mm in diameter or equivalent circular area, upwards to Ø 52 mm and then to no restrictor at all, downwards to a minimum of Ø 46 mm), if needed during the Championship, as described below in Art. 2.4.4.4. The Manufacturer must supply the FIM with 20 sets of plug-calibres (-gauges) to check the diameter of the air restrictor when using one of the prescribed sizes (Ø 52, Ø 50, Ø 48, Ø 46 mm). A Manufacturer may have a non-circular air restrictor, provided that the area of this restrictor is equivalent to the area of a nominal circular restrictor. In this case, the Manufacturer must supply the FIM with 20 sets of plug-calibres (- gauges) for measuring the restrictor during the technical verifications. The FIM may also request the Manufacturer to supply a cut section of the air restrictor(s) in each of the prescribed sizes. 2.4.4.4 Air Restrictor adjustment The minimum air restrictor size is increased or decreased in 2 mm steps in diameter of equivalent circular area, according to following procedure: 1. – If the minimum weight of the 1200 cc 2 cylinders configuration has reached the lower limit of 162 kg and, – if the resulting gap in the average value of ‘event averages’ is more than 5 points in favour of the 1000 cc 4- cylinders and, – if a rider of a 1000 cc 4 cylinder is leading the riders’ Superbike World Championship standings at that time, then the initial air restrictor size of the 1200 cc 2 cylinders will be increased by one size, to a Ø 52 mm (or the equivalent area 2123.7 mm2), or as a last step, without any air restrictor. 2. – If the minimum weight for 1200 cc 2 cylinder configuration has reached the upper limit of 171 kg and, – if the resulting gap of the average value of ‘event averages’ is more than 5 points in favour of the 1200 cc 2 cylinders and, – if a rider of a 1200 cc 2 cylinder is leading the riders’ Superbike World Championship standings at that time, then the initial air restrictor size of the 1200 cc 2 cylinders will be reduced by one size, to a Ø48 mm (or the equivalent area 1809,6 mm2), or, as last step, to a minimum of Ø46 mm (or the equivalent area 1661.9 mm2). If the air restrictor size is not updated, then the results of three more events will be considered, and a new average value of the ‘event averages’ will be calculated over six events and so on, over multiples of three events, until the points gap of the average value of the ‘event averages’ from the last air restrictor size update is higher than 5. The Superbike Technical Director will inform all the teams about the possible air restrictor size adjustments, within 24 hours from the end of the last event (the last meeting of the International Jury), where the average value of the ‘event averages’ was calculated. The new air restrictor size adjustments must be applied as from the first following event. 2.4.5 Fuel 2.4.6 Machine Specifications (From Art. 2.4.2.1, to be added, other text remains unchanged): The use of titanium in the construction of the front forks, the handlebars and the swingarm spindle is forbidden. 2.4.6.1 Frame Body and Rear Sub-Frame 2.4.6.2 Front Forks 2.4.6.3 Rear Fork (swing-arm) 2.4.6.4 Rear Suspension Unit 2.4.6.5 Wheels The use of titanium and light alloys is forbidden for wheel spindles (axles). 2.4.6.6 Brakes 2.4.6.7 Tyres 2.4.6.8 Foot Rest/Foot Controls 2.4.6.9 Handle Bars and Hand Controls 2.4.6.10 Fairing/Body Work & Number Plate Colours 2.4.6.11 Fuel Tank 2.4.6.12 Seat 2.4.6.13 Radiator/Oil Cooler 2.4.6.14 Air Box The air box may be altered or replaced from those fitted to the homologated motorcycle (a special design for racing is allowed). If fuel injectors are attached to the cover of the air box, their position must remain as original. The air filter element may be removed. The air box must be completely closed around the induction bell mouth and all engine breather tubes. Carburation instruments may be entirely within the airbox. The air box drains must be sealed. All motorcycles must have a closed breather system. The oil breather line must be connected and discharge in the airbox. The breather system (airbox plus any breather oil collector box) must be capable in the event of drain pipe blockage, of retaining a minimum of 1000 cc of discharged fluid. 2.4.6.17 Fuel Supply ECU can be modified or changed. Fuel pump and pressure regulator may be modified or changed. Fuel lines may be replaced. The fuel line(s) going from the fuel tank to the carburation instruments must be located in such a way that they are protected from possible defects. Fuel vent lines may be replaced. Fuel filters may be added. Fuel petcock may be altered or replaced from those fitted to the homologated motorcycle. 2.4.6.18 Engine The following engine components may not be altered from the homologated machine except as noted. The homologated engine design model cannot be changed. Homologated materials and castings for the crankcase, cylinder, cylinder head and gear-box housing must be used. Material for the crankcase, cylinder, cylinder head and gear-box housing may only be added by welding or removed by machining. The method of cam drive must remain as homologated unless a complete kit is available through normal commercial channels. These kits must be available in significant quantity and be listed in the racing spare parts book. · For 1000 cc 3 & 4 cylinders and 1200 cc 2 cylinders Aftermarket or modified cam drive components are allowed, however the cam drive must be in the homologated location. The method of valve retention must remain as the homologated model (no pneumatic valve retention devices are allowed unless fitted to the homologated model). All moving internal engine, gear-box and clutch parts may be altered or replaced including materials from those fitted on the homologated motorcycle (unless not allowed by the individual section covering the parts in question). Polishing and lightening of engine parts is permitted, except for carburation instruments (unless not allowed by the individual section covering the parts in question). · For all configurations The sequence in which the cylinders are ignited (i.e. 1-2-4-3), must remain as originally designed on the homologated model. Simultaneous (*) firing of 2 cylinders is also forbidden if not adopted on the homologated motorcycle. *up to 5 degrees firing difference in 2 cylinders is regarded as ‘simultaneous’ firing. 2.4.6.19 Cylinder Head The homologated cylinder head can be modified as follows: Homologated materials and castings for the cylinder heads must be used. Material for these parts may only be added by welding or removed by machining. The induction and exhaust system including the number of valves and or ports (intake and exhaust) must be as homologated. Porting and polishing of the cylinder head normally associated with individual tuning such as gas flowing of the cylinder head, including the combustion chamber is allowed. The compression ratio is free. The combustion chamber may be modified. The valves may be altered or replaced from those fitted to the homologated motorcycle. The valve seats may be altered or replaced from those fitted to the homologated motorcycle. The valve guide may be altered or replaced from those fitted to the homologated motorcycle. Valve springs may be altered or replaced from those fitted to the homologated motorcycle. The valve retainers may be altered or replaced from those fitted to the homologated motorcycle. · For 1000 cc 3 & 4 cylinders and 1200 cc 2 cylinders Aftermarket or modified valves, springs, retainers and other valve train components are permitted. The original number of valves must be maintained. a. Valve diameters, including stem, must remain as homologated. b. Valves must be made of the same basic material as the homologated valves. c. Valves must remain in the homologated location and at the same angle as the homologated valves, except for normal valve maintenance. d. Rocker arms (if any) must remain as homologated (material and dimensions). 2.4.6.20 Camshaft 2.4.6.21 Cam Sprockets or Gears 2.4.6.22 Crankshaft · For 1000 cc 2 cylinders Crankshaft may be altered or replaced from those fitted to the homologated motorcycle. Crankshaft stroke must remain as homologated. · For 1000 cc 3 & 4 cylinders and 1200cc 2 cylinders The following modifications are allowed to the homologated crankshaft: a. Bearing surfaces may be polished or a surface treatment may be applied. b. Balancing is allowed but only by the same method as the homologated crankshaft. (for example heavy metal i.e. Mallory metal inserts are not permitted unless they are originally specified in the homologated crankshaft.) c. Attachment of aftermarket ignition components or sensors is permitted. d. Balance shaft may be removed. 2.4.6.23 Oil Pumps and Oil Lines 2.4.6.24 Connecting Rods · For 1000 cc 2 cylinders and 1000 cc 3 & 4 cylinders Connecting rod may be altered or replaced from those fitted to the homologated motorcycle. Carbon composite or carbon fibre materials are not allowed if not used in the homologated motorcycle. · For 1200 cc 2 cylinders Connecting rod must remain as homologated. Polishing and lightening is not allowed. 2.4.6.25 Pistons · For 1000cc 2 cylinders, 1000 cc 3 & 4 cylinders Pistons may be altered or replaced from those fitted to the homologated motorcycle. · For 1200 cc 2 cylinders Standard piston or the kit (*) piston must be used. (*) The kit piston must have the same price as the standard one and must be listed in the current racing parts list of the Manufacturer and be on sale for customers. Within 90 days from the order, the customer must receive the kit piston set. 2.4.6.26 Piston Rings 2.4.6.27 Piston Pins and Clips 2.4.6.28 Cylinders 2.4.6.29 Crankcase/Gearbox housing and lateral covers 2.4.6.30 Transmission/Gearbox All transmission/gearbox ratios, shafts, drums, selector forks are free. Primary gear ratios are free. The number of gears must remain as homologated. Additions to gearbox or selector mechanism, such as quick shift systems, are allowed. Countershaft sprocket, rear wheel sprocket, chain pitch and size can be changed. 2.4.6.31 Clutch Aftermarket or modified clutches are permitted. Back torque limiter is permitted. · For 1000 cc 2 cylinders Clutch system (wet or dry type) and method of operation (cable/hydraulic) may be altered or replaced from those fitted to the homologated motorcycle. · For 1000 cc 3 & 4 cylinders and 1200cc 2 cylinders Clutch system (wet or dry type) and method of operation (cable/hydraulic) must remain as homologated. 2.4.6.32 Ignition/Engine Control System 2.4.6.33 Generator, alternator, electric starter 2.4.6.34 Exhaust System 2.4.7 The Following items MAY BE altered or replaced from those fitted to the homologated motorcycle. 2.4.8 The Following items MAY BE removed 2.4.9 The Following Items MUST BE Removed 2.4.10 The Following items MUST BE altered 2.4.11 Additional Equipment

FIM Officially Adds Red Bull Indy GP To 2008 MotoGP World Championship Calendar

A Road Racing World Championship Grand Prix event will be held next year on one of the most famous circuits in the world, Indianapolis. During a press conference held in Indianapolis, Indiana, United States, on Monday 16 July, the company Indianapolis Motor Speedway (IMS) and Dorna Sports announced they had signed an agreement for the running of a Grand Prix in Indianapolis as from 2008, including the three classes: 125cc, 250cc and Motogp. Among the persons present were Messrs Bart Peterson, Mayor of Indianapolis, Tony George, owner of Indianapolis Motor Speedway, Joe Chitwood, IMS Chief Executive Officer, Vito Ippolito, FIM President, Carmelo Ezpeleta, Dorna Managing Director, Mrs Gill Campbell, Laguna Seca CEO, American riders Kenny Roberts Jr and Kevin Schwantz, and 200 invited motorcyclists. In his speech, Mr Ippolito underlined the importance for the motorcycle sport to come back to Indianapolis, where everything started in 1909 with a motorcycle race, and the importance of all parties working together Dorna and IMS for the three-year contract, and the FIM for the homologation and support. Moreover, Indianapolis is one of the main and most well-known – places in the world of motorsports, which will have a great impact in the world of sport in general. The event will be held on 14 September 2008, on a circuit which uses a part of the oval and a new track designed in the infield.

Bayliss: I Have A Feeling Brno Will Be Difficult For Us

Brno (Czech Republic), Thursday 19 July: The Ducati Xerox Team arrive at the Automotodrom Brno for this weekend’s ninth round of the World Superbike Championship at the spectacular and notoriously difficult Czech Republic circuit in the forests around the town of Brno. Not only is the Automotodrom one of the most fearsome circuits on the calendar, but it also has a reputation of not being a particularly happy hunting-ground for the Ducati Xerox Team, which aims to set the record straight this weekend. The last round at Misano saw Bayliss step up his title defence with a double triumph that takes the 38-year-old Australian rider’s mid-season winning streak to three races. After zero points scored at Donington due to his nasty crash, Troy is now back within striking distance of championship leader James Toseland (Honda), who is just 21 points in front. Troy Bayliss, 2nd in championship (239 points) Testing one month ago saw Troy Bayliss just a fraction away from nailing a 2 minute dead time on a qualifying tyre in cool conditions, but he knows that conditions will now be a lot hotter now and that the fickle Brno track could easily play tricks on the twin-cylinder Italian machines. A DNF and an eighth place were the best results Troy could put together in a disappointing weekend in 2006 on his first Superbike visit to the circuit. “I have a feeling Brno will be difficult for us” declared Troy. “The reason is the track layout, the conditions, a bit of everything really. It’s going to be hot, we do struggle in those conditions and we don’t really know why. If we did, then we’d sort it but it’s not easy. We’re going there and we would like to win but honestly I think it’s going to be more difficult than that and we just want to keep the points as close as we can. Testing went pretty well three weeks ago, we were quick on a qualifying tyre, and we did a couple of race simulations but we didn’t exactly get what we wanted from the tests so we’ll just have to wait and see what conditions are like when we get to Brno. I remember last year Kagayama did a couple of great races so I’m hoping he does some more this year!” Lorenzo Lanzi, 6th in championship (133 points) The 25 year-old Italian has four races to his name at the Brno circuit, but his best result so far has been sixth place, which he scored twice in 2005. Lorenzo showed some signs of a mid-season revival at Misano but he now finds himself having to defend sixth place in the table from a fast-approaching Ruben Xaus. “Brno is a track that I like a lot” declared Lorenzo. “In testing we didn’t go bad, especially with the qualifying tyres, but on race tyres we were a bit further down the order. It’s a strange circuit for us because the track conditions change all the time and we seem to have more problems here than the others. Every day is different, but we hope to go there and have a more normal Sunday than what we have had in past years. We know that Brno is a track that creates problems for us, but judging by the results of the tests, I’m optimistic for this weekend even though conditions will be different”. Championship Points (after 8 of 13 rounds): Riders – 1. Toseland (Honda) 260; 2. Bayliss (Ducati Xerox) 239; 3. Haga (Yamaha) 234; 4. Biaggi (Suzuki) 217; 5. Corser (Yamaha) 182; 6. Lanzi (Ducati Xerox) 133; etc. Manufacturers: 1. Ducati 234; 2. Yamaha 277; 3. Honda 274; 4. Suzuki 233; 5. Kawasaki 102; 6. MV Agusta 1. The Circuit Name: Automotodrom Brno Length: 5.403 km Pole Position: left Corners Left/Right: 6/8 Finish line length: 636 m Race distance: 2 x 20 laps / 108.060 km Statistics : Best lap: Haga (Yamaha) 2m00.457s (2006). Lap record: Haga (Yamaha) 2m02.594s (2006). Superpole: Haga (Yamaha) 2m00.457s (2006). 2006 Results : Race 1: 1. Kagayama (Suzuki); 2. Toseland (Honda); 3. Fabrizio (Honda). Race 2: 1. Kagayama; 2. Fabrizio; 3. Haga (Yamaha). Race 2:

Steve Martin Has Stayed Busy Since Leaving The DFX Honda Team

Experienced motorcycle racer Steve Martin has been in demand for a variety of testing and commentary roles since his departure from the DFX Honda World Superbike team in mid May. His first role came in the form of being the guest commentator for the world broadcast feed for the World Superbike Championship from Silverstone, alongside veteran commentator Jonathan Green and fellow racer Scott Smart. Steve commented, “I was nervous as I hadn’t done anything like that before so you always worry that you’re going to sound like a dork! It’s the sort of job that when your Mum says you did ok you don’t know whether to believe her or not. I wasn’t sure about how I would find commentating but I actually really enjoyed it.” With glowing feedback from his co-commentators and also fans who emailed in to comment on Steve’s great thoughts and insights to the track action, the Aussie was invited to return to the microphone for the following rounds at San Marino in Italy a few weeks later and Brno in the Czech Republic this coming weekend. Steve continued, “Commentating at Misano was even more daunting than Silverstone as there was no Scott Smart, along with Jonathan and myself, to also fill in the gaps. But I ended up feeling very comfortable and the commentary flowed well between the two of us. I am really looking forward to doing Brno now as I think the racing there will be really close.” Although enjoying his stint and also increasing his experiences of commentating, Steve is still a gutsy racer at heart and his outstanding riding and bike development abilities were highlighted when a number of teams contacte Steve, asking him to test their race machines and provide his direction and input for development and set-up. “It felt good to be approached by a number of teams and whilst it would have been great to be able to follow up every option, that was not the most productive way forward for me or the teams,” explained the Aussie. “So I’ve ended up on a Yamaha theme really. Nothing planned but it’s just how it’s panned out. “I did a two day test for the Yamaha France World Superbike team at Lausitzring, alongside Nakatomi on their R1 customer bike which was a lot of fun and we achieved a great deal in a short space of time. The bike was pretty standard but I managed to lap with some respectable times and the guys were happy that I was able to give them some constructive feedback and a direction to head in with set-up going forward.” The Yamaha Europe World Supersport team were next to request the help of Steve’s expertise, asking him to test a number of new components on the R6 of Kev Curtain at Brno, alongside Broc Parkes. Steve continued, “The test went quite well and I was able to dip under the current lap record regularly, although the emphasis of the test was evaluating some new components and not really an ultimate lap time. That R6 is a really nice bike and still has a lot of potential to be unlocked, so I was happy to have been able to ride it again and have an input into that.” Steve then agreed terms to ride for Mandy Keinz Yamaha Austria racing team and will line up on the grid for the Suzuka 8 Hour race later this month. “I wasn’t really looking to do the ‘eight hour’, but Mandy kept ringing me and one day he caught me at the right time. I’m glad that he did in the end as it is a very experienced team. My son Axel is also happy about it too as Mandy promised to give him his first motorcycle – a Yamaha pw 50 of course – and Axel’s not even one yet!” Just when he thought things couldn’t get any busier, Steve received a call from Rob MacElnea asking if he would be interested to test the Virgin Yamaha R1 to evaluate its performance. “Out of all the bikes and teams that I have tested for this year, I was most impressed by what the Virgin Yamaha team have accomplished in terms of bike set-up and also team dynamics, and I clicked well with both elements,” explained Steve. “I only got to lap Donington for an hour during the lunch break of a track day, but it was enough to let me know that things just seemed to click, that the R1 was fast, steered well and looked good so had all the fundamentals of a good package.” “I’ve had a number of years experience motorcycle racing and have ridden every make of bike; two, three and four cylinders, Superbike, 500GP and Supersport. Given this I know how a bike should feel and what feedback a team needs in order to make the package work, so it’s been great that I’ve really been able to use my skills to experience over the last few months and also that they have been recognised and wanted by teams. Steve concluded, “I’m still not sure what I will be doing in the future. I don’t want to rush into any decisions and end up in another situation like at the start of this season. But I have options which is the positive thing and so I’ll need to assess these over the next few weeks and then I should be in a clearer position to make some decisions and update everyone with more news!”

Roger Hayden On Racing The U.S. Grand Prix: I’m Not Putting Too Much Pressure On Myself

After a mixed result at last week’s German Grand Prix at the Sachsenring, the Kawasaki Racing Team are preparing for the 11th round of the MotoGP world championship at Laguna Seca this Sunday in what will be a major event for the squad. Three 800cc Ninja ZX-RR bikes will be on the grid this weekend as American Kawasaki AMA Superbike and Supersport racer, Roger Lee Hayden, joins Randy de Puniet and Anthony West for the Californian showdown. The Laguna circuit is a complex amalgamation of twists and turns, with seven left and four right hand curves, coupled with some considerable climbs and drops, the most famous of which is the notorious Corkscrew: a sharp, steep and winding downhill corner, a true test of mettle for any Grand Prix rider. It all makes for a magnificent spectacle and the round is hugely popular with American crowds who come to party and support their numerous, homegrown heroes on the grid. De Puniet described his race here last year, his first ever at the circuit, as the hardest of his life as a blistering heat wave affected riders and track alike. It was so hot the recently laid track surface started to melt and the AMA support races were postponed. However, the Frenchman managed twelfth place, despite the sweltering conditions, and hopes to build on that experience this weekend. West, having come from the 250cc world championship, is a newcomer to Laguna Seca and is relishing the opportunity to learn the track and see what the Ninja is capable of around its 3.61km, or 2.243 mile, length. After making excellent progress since joining the team in June, the 26-year-old Australian hopes to add to his tally of 20 championship points, accumulated since the British Grand Prix at Donington Park. Meanwhile, Kawasaki’s MotoGP team welcome American Hayden to their ranks this weekend. Younger brother of current world champion, Nicky, Roger Lee has valuable experience and knowledge of Laguna and, having tested the ZX-RR in Japan earlier this month, is looking forward to seeing what he can do on it in Sunday’s race. It will be a tough number for Hayden, who will also compete in the AMA Supersport race on the same day, but no doubt he will enjoy plenty of support from the US fans to spur him on. Promisingly, the weather forecast is looking good, with lots of sunshine and agreeable temperatures, without the exhausting heat wave of last year. This should mean the hottest action will be on the track. Randy De Puniet Kawasaki MotoGP Pilot #14 “I’m still disappointed about the result last week but we had the speed, and did a good job of setting up the bike, so I’m feeling good for this weekend. I think it will be a hard race, though. Last year, it was difficult for me at Laguna: this track is like the Sachsenring in that it’s short and tight and the Corkscrew is an especially difficult corner. I need to improve at that section this weekend, because I wasn’t so fast there last year, but the bike and Bridgestone tyres should perform well and I think I’ll be able to get a good result. And it’s not as hot as in 2006, which will be better for the engine, for the tyres and for me! I like being in America, so I’m happy to be at Laguna, and I’m feeling confident and upbeat.” Anthony West Kawasaki MotoGP Pilot #13 “This is my first time in America, and I’m excited to be here, but obviously that also means it’s my first time at this track so it could be hard to learn it and still go fast. Still, I’m looking forward to the race: it’s something different for me and should be exciting. I’m a little bit more confident coming here after last weekend’s result at the Sachsenring but it’s still going to be difficult. I just need to learn as much of the circuit as I can before I get on the bike, although I normally learn tracks pretty quickly. When I rode in some Supersport races earlier this year, I hadn’t ridden any of those three tracks before but I still did OK, so hopefully I can do the same here. I don’t know if I can still improve my final position in the race this weekend, I’d need to get higher than eighth, but it’s different at Laguna as you don’t get the usual people up at the front, so it could be possible.” Roger Hayden Kawasaki MotoGP Pilot #95 “I’m really looking forward to riding the bike again at Laguna; it’s a track I know pretty well and I’ve had a lot of luck here in the past. This weekend’s a big challenge to learn more about the ZX-RR, and about riding in a top level race, but I don’t have any big expectations and I’m not putting too much pressure on myself. It should be a great weekend, though, as I always get lots of support from the fans in the AMA Superbike and Supersport races and I’m sure they’ll be cheering for all the Americans on the grid in MotoGP.”

Updated Reminder: Red Bull U.S. Grand Prix To Be Broadcast Live On FOX, July 22

As we reported on July 12: The reason the Red Bull U.S. Grand Prix at Mazda Raceway Laguna Seca doesn’t show up in program listings for SPEED Channel or CBS is, it’s being shown LIVE (5:00 p.m. Eastern/2:00 Pacific) on Fox, Sunday, July 22. Check local listings for the channel number in your area. SPEED Channel will broadcast the AMA races from Mazda Raceway Laguna Seca on July 22. The AMA Supersport race is scheduled for 6:00 p.m. Eastern Time and the AMA Superbike race is scheduled for 11:00 p.m. Eastern Time. SPEED will also have a one-hour show covering MotoGP Qualifying on Saturday, July 21 at 9:00 p.m. Eastern. So that makes a total of four hours of original motorcycle programming from Laguna. And this weekend’s World Superbike races from Brno will be on SPEED on Tuesday, July 24, the first race at 1:00 p.m. Eastern and the second race at 2:00 p.m. Eastern. World Supersport from Brno will be shown on SPEED on Tuesday, July 31. ~http://www.speedtv.com/schedule/index.php?m=07&d=22&ts=1185076800&timezone=0&subcat=&program=&usecal=yes~ More, from a press release issued by AMA Pro Racing: AMA RACING ON TV July 20-July 27, 2007 (All times Eastern) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Friday, July 20, 8 pm (MavTV) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Saturday, July 21, 2 am (MavTV) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Saturday, July 21, 8 pm (SPEED) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Sunday, July 22, 12 pm (MavTV) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio (GNC Twins Half-mile) Sunday, July 22, 5 pm (MavTV) AMA Superbike Championship presented by Parts Unlimited, Mazda Raceway Laguna Seca, Monterey, California AMA Supersport Championship presented by Shoei Sunday, July 22, 6 pm (SPEED) AMA Superbike Championship presented by Parts Unlimited, Mazda Raceway Laguna Seca, Monterey, California AMA Superbike Championship presented by Parts Unlimited Sunday, July 22, 11 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Lites Championships Tuesday, July 24, 3 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Tuesday, July 24, 9 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Lites Championships Tuesday, July 24, 10 pm (SPEED) AMA Ford Quality Checked Flat Track Championship, Allen County Fairgrounds, Lima, Ohio – (GNC Twins Half-mile) Tuesday, July 24, 9 pm (MavTV) AMA Superbike Championship presented by Parts Unlimited, Mazda Raceway Laguna Seca, Monterey, California AMA Superbike Championship presented by Parts Unlimited Wednesday, July 25, 3 am (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Wednesday, July 25, 3 pm (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Championships Thursday, July 26, 3 am (SPEED) AMA Toyota Motocross Championship presented by FMF, Unadilla Valley Sports Center, New Berlin, New York AMA Motocross Lites Championships Thursday, July 26, 4 am (SPEED) Check local listings Subject to Change www.mavtv.com; www.speedtv.com

Where And When To Get Neil Hodgson’s Autograph, And Other Things To See And Do While At Laguna Seca

Corona Extra Honda Racing is pleased to confirm promotional and autograph signing sessions for riders James Ellison and Neil Hodgson at this weekend’s AMA Superbike and Moto GP event at Laguna Seca, Monterey. Come by to meet the team, the Corona girls get autographs and score Corona swag! CORONA PROMOTIONS RIDERS, SPOKESMODELS & CREW THURSDAY 7-19 BULLWACKERS CANNERY ROW START 7.30 PM, 90 MIN BRITANNIA ARMS ALVARADO ST. START 9.00 PM, 60 MIN FRIDAY 7-20 SLY McFLYS CANNERY ROW START 7.45 PM, 60 MIN MUCKY DUCK ALVARADO ST. START 9.00 PM, 60 MIN EVENT AUTOGRAPHING SIGNINGS RIDERS AND SPOKESMODELS FRIDAY 7-20 HOTBODIES VENDOR AREA START 2.30 PM, 30 MIN SATURDAY 7-21 HOTBODIES VENDOR AREA START 2.30 PM, 30 MIN HONDA HONDA TENT START 3.00 PM, 45 MIN HONDA RIDERS CLUB HRCA TENT START 3.45 PM, 30 MIN See Team display bikes at the following retailers in the Monterey region: ALBERTSONS, SAND CITY NOB HILL, S. MAIN SALINAS BOTTLES N BINS, MONTEREY 7-ELEVEN, CANYON DEL REY NOB HILL LIGHTHOUSE, MONTEREY ALBERTSONS, WATSONVILLE SLY McFLYS, MONTEREY BRITANNIA ARMS, MONTEREY CLUB OCTANE, MONTEREY More, from a press release issued by American Suzuki: Suzuki to Display Much-Anticipated 2008 Hayabusa and B-King Motorcycles at Red Bull U.S. Grand Prix at Laguna Seca BREA, Calif. (July 18, 2007) American Suzuki Motor Corp. (ASMC) will showcase two new 2008 motorcycles “” the Suzuki Hayabusa and B-King “” at the Red Bull U.S. Grand Prix at Mazda Raceway Laguna Seca in Monterey, Calif., July 20-22. This will be the first public showing of the recently announced high-performance bikes. “Tens of thousands of motorcycle enthusiasts attend this race every year, and Suzuki wanted to take this opportunity to give fans a first-time, up-close and personal look at the Hayabusa and B-King,” said Glenn Hansen, communications manager, ASMC, motorcycle/ATV division. “Both motorcycles have been highly anticipated by media and motorcycle enthusiasts alike, and this is the perfect opportunity to showcase Suzuki’s new flagship models.” The Hayabusa and B-King will be on display at the Suzuki booth, along with other 2008 models. Also at the booth, consumers can pick up a free special booklet, produced by Motorcyclist magazine, on the history of the Hayabusa and development of the new Hayabusa. Plus, Team Suzuki racers will be signing autographs. About the Hayabusa Suzuki’s world-renowned Hayabusa sportbike is new for 2008 with an aggressive and aerodynamic package with smoother bodywork and better air flow which still retains the signature Hayabusa character. The Hayabusa boasts updated features, such as optimum handling and braking performance, outstanding acceleration and new engine technology. It has a more muscular four-cylinder 1,340cc engine, a broader wave of torque for even more effortless acceleration and 12 percent more horsepower. The Hayabusa also features reduced emissions while still maintaining maximum overall performance. It’s the ultimate sportbike for the road. About the B-King First introduced as a Tokyo Motor Show-stopper in 2001, the B-King is a bold new machine that’s gone from concept model to production reality. The B-King takes new-millennium styling and design to the outer edges with its unique look and feel. But, the B-King isn’t just about style, it also has plenty of substance with a 1,340cc, four-cylinder, 16-valve DOHC fuel-injected engine taken from the new Hayabusa. It features superb handling and control, muscular torque and exhilarating throttle response, all wrapped in an advanced aluminum-alloy frame fitted with high-quality fully adjustable front and rear suspension and front disc brakes featuring radial-mount four-piston calipers. It’s the ultimate streetbike.

Updated Again: The Last Round Of Press Releases From Last Weekend’s Various Races

GO BIG’S GLENN 2ND, MILLSON SHINES DURING WET WEEKEND AT MOSPORT (Bowmanville, ON) Go Big Racing’s Paul Glenn increased his points lead to 17 points in the Amateur 600 Sport Bike Class of the Parts Canada Superbike Championship with a 2nd place finish this past weekend at Mosport International Speedway, while Ross Millson had a up and down weekend, with mechanical issues in the Pro 600 Sport Bike Class, but continuing his strong rookie campaign in the Pro Superbike Class with a 13th and 11th place finish. Much like the doubleheader round in Calgary, the weather once again washed out qualifying for the International Motorcycle SUPERSHOW Amateur 600 Sport Bike class. The grid was set by practice times and Keene, Ontario native Paul Glenn once again started 5th. Glenn quickly worked the No. 79 Go Big Racing machine up to 2nd and had inherited the lead on lap 5 when both riders who were ahead of him crashed in turn two and three. The race was red flagged at this point and it was determined that even though the No. 741 of Yanick Goudreault had been involved in a crash, he was not the rider that caused the red flag and was leading the race heading into lap 5, therefore he was declared the winner. “When the red flag came out I was in the lead and figured that we would be getting ready for a restart” commented Glenn after the race “I was disappointed that they awarded the win to the No. 741 even though he was involved in a crash, but we will take the points and begin to prepare for the next round in Nova Scotia.” Rounding out the top 3 in the AM 600 was Israel Johnas of Oak Lake, Manitoba. The weekend did not start out well for Hamilton, Ontario native Ross Millson. On Friday, Millson suffered mechanical issues on his No. 39 Suzuki GSX-R600 in preparation for the two Pro 600 races scheduled during the doubleheader weekend. Focused solely on the Pro Superbike Class, Millson put in strong performances in both races. Due to weather conditions on Saturday, the first race was pushed to Sunday morning and under clear skies, Millson finished with a 13th place finish after qualifying 19th. The afternoon session was once again affected by weather as the 5th round of the Pro Superbike Class was run under very wet conditions. Millson showed that wet or dry, he is becoming more comfortable on his Suzuki GSX-R1000 moving up five positions and finishing a solid 11th. “Even though the track was wet and I was still hurting from crashes earlier in the year, I knew that we had some of our sponsors out watching and I wanted to put in a good showing for the folks at JD Graphics and Infinet Designs as they have been great supporters of Go Big Racing” said Millson of his performance over the weekend. In other Go Big Racing news, Joshua Smith-Moore and Steven Green (both from Knoxville, TN) filled in admirably on the Go Big Racing No. 79 Suzuki SV650 during Round 5 of the SunTrust Moto-ST Endurance Series at Iowa Speedway in Newton, Iowa, finishing in 4th place in the ST class. Due to their prior commitment to the Parts Canada Superbike Championship at Mosport, Millson and Glenn needed the duo to compete in Iowa and ensure that Go Big Racing would still be in the hunt for the Championship heading to Daytona in October. “We really appreciated the guys stepping in and taking over the bike this weekend” commented Millson “without their help, we would not have been able to protect our 2nd place standing heading into the 8 hours of Daytona, where anything can happen. We also want to thank Team Zyvax for their support throughout the weekend.” Next up for Go Big Racing is Round 4 of the R.A.C.E Super Series at Shannonville Motorsport Park from July 20 22, 2007. The Parts Canada Superbike Championship resumes August 9 12, 2007 with Round 6 being held at Atlantic Motorsport Park in Shubenacadie, Nova Scotia. More, from a press release issued by WERA Motorcycle Roadracing: Jensen and Palmer Dominate in WERA Nationals at Grattan BELDING, Mich. Robert Jensen and Jason Palmer were the riders who left Grattan Raceway with the most trophies following last weekend’s WERA National Series event, which included a water-logged Bridgestone National Endurance race and the Michelin National Challenge sprint races. Round five of the endurance series was a battle against both competitors and Mother Nature, with rain falling for four of the six hours on Saturday. The nasty weather was no deterrent for Vesrah Suzuki, who won by six laps with Tray Batey, Chris Ulrich and John Jacobi on a Suzuki GSX-R1000. Dane Westby and Dustin Meador rode a Kawasaki ZX-6R to a finish of second overall, giving Team Westby the Mediumweight Superstock win. Unfortunately, Westby crashed 40 minutes into the sixth hour, bringing out the red flag and an early end to the race. Suzuki Rider Development’s Reuben Frankenfield, Mark Junge and Russell Wikle were third overall and first in Mediumweight Superbike on a Suzuki GSX-R600. The team was on the same lap as Team Westby and in contention for second overall. The Heavyweight Superstock win went to 5150 Racing. Justim Marm and Phil Caudill rode an MV Agusta R312, holding off several other teams who were on the same lap at the end. Bad Rad Racing II won the Lightweight Superbike class with Joe Schoch, Aaron Aaronson and Tristan Koeneker riding a Suzuki SV650. Once Saturday’s rain was over, the sun came out and racing conditions were ideal for Sunday’s National Challenge Series sprints. Robert Jensen was the top expert of the day, winning Open, 600 and 750 Superstock. Tray Batey and Dane Westby each took two expert wins. Batey’s came in Heavyweight Twins Superstock and a hard-fought Formula 1. Westby won Lightweight Twins Superstock and Formula 2. Tommy Aquino won 600 Superbike expert, and Matt LaPham won 750 Superbike. Jason Palmer upset Russell Wikle’s win streak in the novice division, winning 600 and 750 Superstock as well as 600 and 750 Superbike. Wikle got his turn to win in Open Superstock. In the other novice races, Andy Taylor won both Lightweight Twins Superstock and Formula 2. Alja Hessami won Heavyweight Twins Superstock. The WERA National Series begins the second half of the season with round six at Summit Point Raceway from August 3-5. More information about WERA can be found online at www.WERA.com. More, from a press release issued by Team Moe’s/TVR: Team Moe’s/TVR Second in Heavyweight Superstock Amid Storms at Grattan BELDING, Mich. Team Moe’s/TVR learned the true meaning of endurance racing during last weekend’s round five of the WERA National Endurance Series at Grattan Raceway. An abbreviated roster, only one dedicated pit crew member, rain and more set the tone for the six-hour race, but Team Moe’s still came away with second in Heavyweight Superstock. Chuck Ivey and James Stroud had to share the riding duties on the team’s Yamaha YZF-R1, with Josh Day still recovering from his rough weekend two weeks ago at Road Atlanta. There was little time for setting the bike up prior to the race, but with steady rain falling at the green flag, the strategy was more about survival than speed. Ivey started the race, and with the slowed pace on the slippery surface, his first stint lasted nearly two hours before the team brought him in. Stroud took over after that, but shortly before the end of his stint the black flag came out for the Team Moe’s Yamaha. A rear brake line bracket had come loose, grinding against the wheel and creating smoke. After getting checked out by a course worker, Stroud was allowed to head to the pits for repairs and his scheduled pit stop. The team switched from the rain tires to DOTs and Ivey took over for his second stint. The unlikely mishap set the team back, but when the track dried with two hours to go Ivey began making up time on Heavyweight Superstock leader 5150 Racing. Ivey made one more stop to give the bike back to Stroud who would finish the race. Stroud continued to make up ground but a red flag ended the race 40 minutes prematurely. Team Moe’s had closed to half a minute behind 5150. “It was treacherous in the rain, but we started moving up when it began to dry,” said Stroud. “We would have liked to win, but it wasn’t our weekend. A restart would have given us a 40-minute heads up sprint race against 5150. It would have been close.” Chris Cutright was the sole pit crew for the day, and Ivey and Stroud had to pitch in to assist with refueling and tire changes. Luckily, Dalke Motorsports was willing to lend a hand. “Dalke had a skeleton crew, too, and we were able to help each other with stops,” said Cutright. “I was never not doing something during the whole six hours. It was hectic, and the rain didn’t help things.” Ivey was optimistic about the team’s second in class and seventh overall result. “Even with a shortage of help in the pits and only two riders, we still fared well,” he said. “This gives us the motivation to be well-prepared for the next round and ready to win.” Fans can follow Team Moe’s quest for the Heavyweight Superstock title at www.TeamVelocityRacing.com. More, from a press release issued by Dalke Motorsports: Rain, red flags and attrition, big issues at Grattan Raceway for the 5th race in the WERA-AMA National Endurance Series. Dalke Motorsports woke up to a cold rainy day at the Belding, Michigan track and had their Interstate Yamaha R6 in the top ten and second in class until a brake pad bound up in the caliper. The team lost a 2 laps and a few positions but managed to claw their way back to 6th overall and third in class. Red flags bunched everyone up again as things started to dry out. Dalke was looking like a lock for third in class and possibly a top five overall until a brake pad hung again. The crew decided to change brake systems from the back-up bike in an effort to eliminate any future problems. During the switch air got into the back-up system and cost valuable time getting the air out. The Dalke riders really got to work and tried to make up as much time as possible in the dry conditions and had actually picked up one lap before the first in class team and the third in class team crashed together. With 45 minutes to go, this crash brought out the last red flag of the day as WERA Officials called the race. Dalke Motorsports had to settle for 4th in class and 12th overall as the race was cut short. We will be doing some homework in anticipation for the next round at Summit Point Raceway. This finish moves Dalke to 3rd in class and 7th overall. More, from a press release issued by Team Amadeus X: Good Progress but Bad Luck in Croatia Alpe Adria Endurance Series, Round Two, Rijeka Amadeus X One fail to finish after technical problems Ahead of the second round of the Alpe Adria Endurance series, Team Amadeus X One had been hoping to repeat the success of their first round victory at Rijeka in May, but it was not to be. The weekend turned out to be completely different for the Tuscan team; despite improving their speed with new rider Nico Morelli, unexpected technical problems compromised their final result. Young Italian Morelli, who usually competes in the Amadeus colours on a Yamaha R6 in the Italian Championship, left everyone stunned with his debut performance on a 1000cc superbike, recording the third fastest time in qualifying. The team, which also comprised regulars Tessari and Ricci, was therefore confident before the start of the race, but after just 30 minutes handling problems forced Tessari to pit. With the 200-mile race compromised, the team used the rest of the meeting as a series of tests ahead of the Suzuka 8 Hours race on 29th July, which will see Riccardo Ricci and Paolo Tessari share the riding of the Amadeus X One Yamaha YZF-R1. Will Gruy’s recovery and convalescence is continuing and he will now return to racing for the Oschersleben 24 Hour race on the 11th/12th August. Morelli will be reserve rider for this race. More, from a press release issued by Team EMGO USA: Team EMGO USA’s Chris “Opie” Caylor had a successful weekend, this past weekend, at Grattan Raceway Park in Belding, Michigan. A track Opie hadn’t laid eyes on since competing in a WERA National Endurance Race there, back in 1998. Opie had this to say, “It took me a few sessions before I was able to forget about the bumps and just ride. I really enjoy the layout of the track, it just needs to be repaved.” Opie went out for Formula One qualifying friday afternoon and took his EMGO-sponsored, Dunlop-shod Suzuki GSX-R1000 to 7th on the grid. Afterwards, Caylor said as tight and technical as Grattan is, he would use his GSXR 750 for Open and 750 Superstock qualifying. In Open Superstock, Opie qualified 7th again but, used the session to improve the bikes setup. Team EMGO USA mechanic Shane Giguere made some changes in between the sessions and sent Opie back out for 750 Superstock qualifying. The changes worked and Opie qualified 2nd in 750 Superstock at a 1:20.2 but, still almost a full second behind polesitter Robert Jensen. “I feel like the key to this place is just making the bike go over the bumps. We made some changes and things got much better, we’ve just got to keep working in that direction”, said Caylor. To better prepare himself for the teams main focus, the 750 Superstock Class, Opie raced his GSXR 750 in the Open Superstock race. At the drop of the green flag, Opie went from the 3rd row to third place going into turn one. Unfortunately, lap after lap, one more of the bigger 1000cc bikes would just manage to get past on the long front straightaway. Opie turned his best lap yet, a 1:20.0 in route to a 7th place finish. During that race, Opie came up with a few more idea’s on setup. Shane made the changes and then it was time to go right back out. In 750 Superstock, Opie again got a great start and followed Robert Jensen into turn one. The two distanced themselves from the rest of the field as they engaged in their own private battle. Opie stuck to Robert but couldn’t find an immediate way past. A few laps in, Jensen ran a little wide going into turn one and gave Opie just enough room to pounce. Now into the lead, Opie took control and worked on holding Jensen off only to make the same mistake in turn one that Jensen did earlier. Jensen repassed Opie and the battle continued. On the last lap, the two came upon a lapped rider and Jensen got past cleanly while Opie didn’t. Opie would have to settle for second. ” That was a good race! Runing the 750 in the Open Superstock race was a big plus. I went a full second a lap faster in the 750 race than I did in the Open race. I am a bit disappointed though, I had him! I just got into one that one lap a little too hot and it just gave him enough room to get back by. I thought I had another shot at him but he got by a lapper at a great spot for him and the worst spot for me, so I finished 2nd.” In Formula One, after another one of his great starts Opie piloted his Suzuki GSXR 1000 to an uneventful 6th place and had this to say afterwards, “Overall, it was a decent weeekend. I am somewhat pleased with the 750 results and the 1000 continues to improve. We just gotta keep building!” More, from a press release issued by Kawasaki Canada: KAWASAKI TEAM FACE TRIUMPHS AND TRIBULATIONS AT MOSPORT A dry summer in southern Ontario came to a halt this past weekend as cool weather and rain hit the track at Mosport International Raceway for rounds four and five of the Parts Canada Superbike Championship. Despite the weather, 2006 Double Canadian Champion Jordan Szoke was able to take two of a possible four wins for the Canadian Kawasaki Factory Road Race Team. The forth round also brought with it a first for Szoke’s teammate, Brett McCormick who clinched his first podium in the Superbike Championship in just four weekends. The Yoshimura Pro 600 Sport Bike round held on Saturday was less then desirable for the riders as the conditions were extremely tricky. In fact, it took considerable time to complete the race but when the checkered flag waved, it was the Kawasaki ZX-6R of Szoke who crossed the line first. The Brantford Ontario native put on a spectacular display to get to the front. During the race, Szoke crashed in the entry to Moss corner but was able to take advantage of a race stoppage to remount and return to his pit. The entire Kawasaki team was involved to get Szoke and his ZX-6R back on the grid before the restart of the race. Unfortunately, Jordan had to restart from the back but from there the 28 year old sliced through the pack, needing just five laps to go from last to first. “When I restarted the race, I thought the track is slippery, let’s just score some points. If I can get a top five, I’d be happy. Soon after that I found myself battling for the lead.” Due to the conditions Saturday afternoon, the first of two Superbike races were postponed to Sunday morning. By then the weather had cleared and under sunny skies Szoke, aboard his Kawasaki Ninja ZX-10R, captured his 4th straight win of the season after a last lap pass for the lead. For McCormick, after running a strong 4th during the event, the news that McBain had been penalized for a jump start came as a fantastic surprise as it now placed him in 3rd position. In just four races, McCormick has become a solid force in the Parts Canadian Superbike series and he was elated to earn his first Superbike podium. “I had a great battle with Kevin Lacombe for most of the race. I thought I finished 4th and didn’t find out about McBain’s penalty until I got into the pits. I was thrilled. The ZX-10R is a great bike and getting both Jordan and myself on the podium shows how awesome the team is!” Kawasaki Team Manager Jeff Comello was just as pleased with his rookie rider. “After all the speculation that a 15 year old couldn’t handle the intricacies of a Superbike, Brett was able to prove the critics wrong. He’s been running extremely well this season.” Round five of the Superbike Championship and the Pro 600 final were not as kind to the Kawasaki team. The afternoon Superbike race was yet again forced to run in inconsistent wet conditions. While in 3rd, Szoke crashed sliding off the slick track just behind his ZX-10R but without losing a beat, he jumped up, restarted his battered bike and was off managing to salvage a 7th place finish. McCormick, who had never been in a wet race aboard the ZX-10R, paced himself finishing a solid 6th. In the second Pro 600 race of the weekend, the results were extremely frustrating for the team. While running in 4th, McCormick crashed in turn 3 and would end up crossing the line 12th after remounting. As for Szoke, his race was almost as heartbreaking. According to Comello, “Jordan was working his way forward in the lead pack when he experienced an electrical gremlin and was forced to retire. It’s hard to take weekends like this one. The team and our riders are working very hard and sometimes things just don’t go as planned. But we did manage to maintain our lead in both championships and I know Jordan and Brett are going to be very determined to make a point at Shubenacadie.” The Canadian Kawasaki Factory Road Race Team are eagerly awaiting round six at Atlantic Motorsport Park in Shubenacadie, Nova Scotia (August 9th-12th) to get back in action. For the latest series information, visit kawasakiracing.ca and cdnsuperbike.com. In addition, all seven races on the will be broadcast on TSN and RDS. More, from a press release issued by USGPRU: Iso and Ferris claim victory at Portland ODENTON, MD – July 3, 2007 – The USGPRU welcomed Eric and Ben Bostrom for the first Apex Academy session last weekend at Portland International Raceway. The Boz Brothers sat down with the USGPRU riders on Friday and provided tips on track analysis, nutrition and training, and how to work with sponsors and fans. “It was an awesome experience. I couldn’t believe they came to help us out!” exclaimed 125GP rider Tyler Odom after the final session. Riders of all ages were present during the lessons, which were held between practice sessions in the Red Bull Pinzgauer tent. Everybody walked away with several ideas of how to prepare for a race, run the race, and how to present themselves before and after the race. The riders took the lessons tought by the Bostrom Brothers out to the track on Saturday. The Rising Sun Cycles 125GP qualifier saw hometown hero Nobi Iso throwing down a fast lap of 1:13.817, with Elena Myers and Benny Solis Jr. pulling down the second and third-fastest times, respectively. Newcomer Ryan Matter crashed during qualifying and broke his leg, but only after capturing the 4th fastest qualifying time. The 250GP qualifying session foreshadowed the spectacular race on Sunday with only a half-second separating the top four positions. Ryan Ferris captured pole position with a 1:12.056, followed quickly by Canadian Eddy Brunet (1:12.264), Vince Rolleri (1:12.590) and Kyle Ferris (1:12.605). The Sunday main events saw Nobi Iso doing battle with Elena Myers throughout the entire race. Elena was within a wheel of Nobi on several blasts down the front straight, but Nobi’s Aprilia was able to hold the youngster off to claim the crown. Benny Solis Jr., Tyler Odom and Royce McLean each ran somewhat lonely races, with almost a full second separating each of the riders. The battle for 6th place became heated by the fourth lap, with Jeff Lim and Michael Caravatta swapping spots several times throughout each lap. Lim ended up with an at-the-line victory to hang onto 6th place. The 250GP race was stopped early on with the red flag coming out on the first lap after Tyler Odom high-sided his machine in “spectacular fashion” according to the closest corner worker. Although Odom was unhurt, he was unable to make the restart, which saw Ryan Ferris, Vince Rolleri and Eddy Brunet immediately start a voracious 3-way battle for the top spot. Brunet led the first lap, but Ferris and Rolleri eventually overtook him. Ferris was barely able to hold off Rolleri, their bikes nearly side-by-side at start/finish almost every lap. Brunet hung back just a couple of bikelengths, possibly hoping that the top two would take each other out at some point during the 15-lap race. Kyle Ferris and Dylan Olsen were in the mix as well, battling for fourth. Turn 8 was ultimately the downfall for Rolleri, who low-sided near the end of lap 10, handing the lead to Ryan Ferris. Brunet, Olsen and Kyle Ferris were able to avoid the turn 8 wreckage to complete lap 10, but Olsen brought out another red flag with a crash in turn 4, ending the race. It was truly an impressive battle, with Ryan Ferris throwing down the fastest lap of 1:10.671 and claiming the win. The USGPRU would like to thank Eric & Ben Bostrom for participating in the first round of the Apex Academy, as well as Ron Trunick’s Red Bull Team, Kevin from Bob Lamphere¹s Beaverton Yamaha, the OMRRA staff and volunteers, the corner workers and medical staff for their hospitality and assistance throughout the weekend. The next USGPRU West Coast round is August 25-26 at Miller Motorsports Park in Tooele, Utah. 125GP Race Results: 1. Nobi Iso ­ 2003 Aprilia RSW125 2. Elena Myers ­ 2007 Honda RS125 3. Benny Solis Jr. ­ 2004 Honda RS125 4. Tyler Odom ­ 2002 Honda RS125 5. Royce McLean ­ 2006 Yamaha TZ125 6. Jeff Lim ­ 2000 Honda RS125 7. Michael Caravatta ­ 1997 Honda RS125 8. Kevin Murray ­ 2006 Yamaha TZ125 9. Phill Krenn ­ 1998 Honda RS125 10. Shellie Matthews ­ 1998 Honda RS125 250GP Race Results 1. Ryan Ferris ­ 2001 Honda RS250 2. Eddy Brunet ­ 2000 Honda RS250 3. Kyle Ferris ­ 1993 Honda RS250 4. Pete Ross ­ 1995 Yamaha TZ250 5. Thomas DiNardo ­ 2005 Yamaha TZ250 6. Elena Myers ­ 2007 Honda RS125 7. Kurt Husted ­ 1996 Yamaha TZ250 8. Dale Murphy ­ 1999 Yamaha TZ250 9. David Matthews ­ 1996 Yamana TZ250 10. Shellie Matthews ­ 1998 Honda RS125 11. DNF crash ­ Dylan Olsen 12. DNF cras ­ Vince Rolleri 13. DNF mechanical ­ Mike Stubbs 14. DNF mechanical ­ Daniel Qualtire 15. DNF crash ­ Tyler Odom

Rizla Suzuki Looking To Keep Momentum Rolling At This Weekend’s BSB Round At Mallory Park

The last time Chris “Stalker” Walker raced at Mallory Park was in the 2006 Race of the Year when he took victory and secured his seat with Rizla Suzuki. Returning to the 1.41-mile track for the ninth round of the Bennetts British Superbike Championship this weekend there’s nothing he’d like more than to top the podium again. “I’ve always liked Mallory Park as it is one of my home tracks and I’ve won quite a few times there in the past,” said Stalker. “It’s also a circuit we have tested at earlier in the season and will start with a direction and idea how we want to set-up my Rizla Suzuki. “I’m happy with achieving another podium at Oulton Park last weekend and think there is a bit of momentum with the team. We all want to get back on the rostrum so much you can taste it. We’ll be going for it at Mallory.” Rizla Suzuki’s Cal Crutchlow, from nearby Coventry, also counts Mallory Park as a home round. He took a career best BSB result with fifth place in the opening race at Oulton Park last weekend and is on top form. Crutchlow said: “My Rizla Suzuki is improving very quickly and we will make more progress this weekend. Every time we go out on the bike we develop it a little further, learn more and become more competitive. “I’ve achieved my season goal of getting in the top six and now I’ll concentrate on repeating that and if possible, going for a podium or two. That’s the performance I need and the whole team wants – and in fairness, I think we are capable of and deserve.” Rizla Suzuki Team Manager Simon Buckmaster is upbeat. He said: “The hard work and graft the team is putting in is starting to pay off. Chris and Cal enjoyed their season best results at the last round and the performance we have been building all season is now starting to show. We are re-energized for Mallory Park and the target for Chris is to take a step up the podium and Cal to get on it himself.” Superbike racing starts at 1300 on Sunday, July 22nd, at the twisty historically Leicestershire circuit.