Home Blog Page 5779

Updated: Charpentier Fastest In Provisional World Supersport Qualifying Friday In Italy

0

2007 FIM Supersport World Championship Vallelunga, Italy September 28, 2007 Provisional Qualifying Results: 1. Sebastien CHARPENTIER (Honda CBR600RR), 1:39.733 2. Gianluca VIZZIELLO (Yamaha YZF-R6), 1:40.339 3. Kenan SOFUOGLU (Honda CBR600RR), 1:40.408 4. Katsuaki FUJIWARA (Honda CBR600RR), 1:40.775 5. Tommy HILL (Yamaha YZF-R6), 1:40.815 6. Craig JONES (Honda CBR600RR), 1:40.854 7. Josh BROOKES (Honda CBR600RR), 1:40.957 8. Broc PARKES (Yamaha YZF-R6), 1:40.969 9. Sebastien GIMBERT (Yamaha YZF-R6), 1:41.001 10. Arne TODE (Honda CBR600RR), 1:41.018 11. Massimo ROCCOLI (Yamaha YZF-R6), 1:41.135 12. David SALOM (Yamaha YZF-R6), 1:41.195 13. Javier FORES (Honda CBR600RR), 1:41.283 14. Joan LASCORZ (Honda CBR600RR), 1:41.320 15. Pere RIBA (Kawasaki ZX-6R), 1:41.356 16. David CHECA (Yamaha YZF-R6), 1:41.571 17. Miguel PRAIA (Honda CBR600RR), 1:41.594 18. Mattieu LAGRIVE (Honda CBR600RR), 1:41.596 19. Fabien FORET (Kawasaki ZX-6R), 1:41.651 20. Simone SANNA (Honda CBR600RR), 1:41.669 More, from a press release issued by HANNspree Ten Kate Honda: Charpentier tops the timesheets at Vallelunga The penultimate round of the 2007 World Supersport Championship started well for HANNspree Ten Kate Honda with Sébastien Charpentier in provisional pole position. Team-mate and 2007 World Supersport Champion Kenan Sofuoglu qualified as the third fastest rider. Unpredictable weather conditions meant that both riders opted out of the majority of the morning free practice, only joining the session in the final half. The track dried out during the afternoon as Charpentier and Sofuoglu took to the 4.110km circuit for the 45-minute official qualifying. Sofuoglu set a fastest lap early on and repeated the feat a further three times before the end of the session. He finished with a best time of 1’40.408. However, it was Charpentier who secured the premier spot on the timesheet with an impressive lap of 1.39.733. The Frenchman was the only rider to secure a 1.39 lap and goes into tomorrow’s second day qualifying as the potential pole sitter. Ronald ten Kate, Team Manager: “It’s been a good day for us but we still have quite a lot of work to do. Missing out on the session this morning meant we had a lot to do this afternoon. We are still playing around with the bike and we’ll be making quite a few changes overnight. I’m happy that we have already achieved the same lap times as we did in the test here. Tomorrow we can concentrate on race set-up and further development of the CBR600RR for 2008.” Sébastien Charpentier: “Today was ok – I am in first position. The track was not completely dry this morning so it was difficult. The first bike didn’t work so well for my style so I changed to my second bike and this was much better. On the first outing it felt stable and I like the set-up. We will work very hard tomorrow to prepare for the race and I just hope it is better weather.” Kenan Sofuoglu: “It was not bad today. We are trying something new on the bike, but it was difficult because of the rain this morning. That meant we had some catching up to do this afternoon, but I am confident that we can improve the times tomorrow. I am aiming for the front row and pole and I am hungry to win the race.”

Corser Tops First World Superbike Practice At Vallelunga

0

2007 FIM Superbike World Championship Vallelunga, Italy September 28, 2007 Free Practice One Results: 1. Troy CORSER (Yamaha YZF-R1), 1:38.155 2. Troy BAYLISS (Ducati 999 F07), 1:38.471 3. Max BIAGGI (Suzuki GSX-R1000K7), 1:38.945 4. Noriyuki HAGA (Yamaha YZF-R1), 1:39.077 5. James TOSELAND (Honda CBR1000RR), 1:39.122 6. Roberto ROLFO (Honda CBR1000RR), 1:39.226 7. Michel FABRIZIO (Honda CBR1000RR), 1:39.240 8. Lorenzo LANZI (Ducati 999F07), 1:39.602 9. Ruben XAUS (Ducati 999F06), 1:39.639 10. Regis LACONI (Kawasaki ZX-10R), 1:39.691 11. Marco BORCIANI (Ducati 999F06), 1:39.792 12. Shinichi NAKATOMI (Yamaha YZF-R1), 1:39.868 13. Karl MUGGERIDGE (Honda CBR1000RR), 1:40.029 14. Norino BRIGNOLA (Ducati 999F05), 1:40.237 15. Fonsi NIETO (Kawasaki ZX-10R), 1:40.549 16. Max NEUKIRCHNER (Suzuki GSX-R1000K6), 1:40.600 17. Yukio KAGAYAMA (Suzuki GSX-R1000K7), 1:40.635 18. Yoann TIBERIO (Honda CBR1000RR), 1:41.290 19. Jakub SMRZ (Ducati 999F05), 1:41.422 20. Vittorio IANNUZZO (Kawasaki ZX-10R), 1:41.536 21. Steve MARTIN (Suzuki GSX-R1000K6), 1:41.552 22. Luca MORELLI (Honda CBR1000RR), 1:41.762 23. Dean ELLISON (Ducati 999RS), 1:44.248

GMD Computrack Atlanta Moving To New Location

GMD Computrack Atlanta is proud to announce our relocation to better serve your motorcycle chassis and suspension needs. Effective October 8, 2007 we will be celebrating the opening of our bigger and better location at: 279 Confederate Ave. Jasper, GA 30143. Our new phone number will be 706-253-1148 and our new email address will be [email protected] We thank you for your trust and business over the last 14 years and invite you to come visit us at our new location soon.

Dainese Founder And Kevin Schwantz To Appear At Opening Of Dianese ‘D-Store’ In San Francisco

Dainese, the world’s leader in protective apparel for motorcycling, skiing, snowboarding, mountain biking, and watersports, has just opened their second D-Store in the USA! Dainese, an Italian company, was founded in 1972 by its current President, Lino Dainese, and started out as a manufacturer of leather pants for Motocross. Since its inception, the company’s history has been intertwined with that of riders who have made motorcycling history: from Giacomo Agostini, Barry Sheene, Freddy Spencer, Kenny Roberts and Kevin Schwantz in the World Speed Racing Championship to Edi Orioli and Franco Picco in the Paris-Dakar enduro race, champions were wearing Dainese gear as far back as the ’70s. Today, the tradition is carried on by the most illustrious names in motorcycling, Valentino Rossi, Max Biaggi, Chris Vermuellen, and many others. Design and technical innovation have expanded the protection and apparel collection to include a multitude of sports in addition to motorcycles. The new D-Store San Francisco carries the complete collection of lines that made Dainese famous over the years: motorbike, ski, snowboard, mountain bike and watersports. The Dainese D-STORES are brand specific stores, located in privileged positions in some of the most important cities in the world. The Motorbike, Bike, Ski, and Watersport collections are showcased in especially designed surroundings where customers can be served by the extremely qualified staff and take advantage of evolved services, such as the production of made-to-measure clothing, beta testing of new products, special events, the rapid procurement of articles, sizes and variants that may be temporarily out of stock, as well as the repair of damaged garments. Dainese D-STORES are currently located in, MILAN, ROME, PARIS, BARCELONA, TOKYO, STOCKHOLM, MOSCOW, MUNICH, WIEN, DÜSSELDORF, KÖLN, TAIPEI, SEOUL, and MANCHESTER. San Francisco is now home to the largest D-store in the world, with over 5000 square feet of showroom. Dainese believes the Bay Area is a perfect match for their collections promoting safety and protection in a city known worldwide for its values towards design and innovation. Dynamic sports are important for many Bay Area residents and Dainese is an ideal product line to support and enhance those lifestyles. In celebration of the opening of our newest D-Store, we will be having a grand opening party on Saturday, October 20th from 10:00am to 6:00pm. Very special guests Kevin Schwantz and founder and president Lino Dainese will be making appearances. Come enjoy snacks and refreshments as well as special pricing on select items throughout the store. The San Francisco D-store is located in 131 South Van Ness, in San Francisco and the hours are Tuesday through Friday from 11am to 7pm, Saturday 10am 6pm and Sundays from 12 to 5pm. Parking is available in the rear of the store off Howard Street. Experience Dainese at the D-Store San Francisco: the largest Dainese showroom in the world!

SunTrust MOTO-ST Endurance Series To Be Broadcast On SPEED Beginning November 20

DAYTONA BEACH, Fla. – The sights and sounds of the SunTrust MOTO-ST Series will thunder onto the airways beginning Tuesday, November 20. Starting with the season opener at Daytona International Speedway in March, each of the six events in this year’s series will be broadcast on SPEED TV per the following schedule. Running one hour in length, each show will feature spectacular non-stop action-packed racing and will be broadcast at 12:00 p.m. (EST). Daytona USA 300 Tuesday, November 20, 2007 Homestead 500K Tuesday, November 27, 2007 VIR 500K Tuesday, December 4, 2007 Road America 500K Tuesday, December 11, 2007 Iowa Speedway 500K Tuesday, December 18, 2007 8 Hours At Daytona Finale Tuesday, January 8, 2008 The newest professional two-wheeled tour in America, the SunTrust MOTO-ST Series is an incredible test of team endurance competition. Boasting a full contingent of some of North America’s most accomplished racers aboard three classes of thundering twin cylinder motorcycles, this series offers fans the chance to witness some of the most breathtaking competition seen in the United States. Be sure to tune in to SPEED and see and hear the thunder of this highly popular new series.

EDR Performance To Host A Female Rider/Racer Clinic This Weekend In Portland, Oregon

EDR Performance to host Women’s Sport and Road Racing Gathering this Saturday, September 29Th from 10am till 1pm With the ever increasing amount of female riders, we felt that a day for them was needed. Team EDR Performance/Kawasaki/Code Superbike School, AMA Pro racer Misti Hurst, will be on hand to talk with the ladies about riding techniques, getting into racing, sponsorships available, and specific female topics within riding/racing. KFG’s Barry Wressell will be on hand as well providing Suspension and Chassis setup/adjustments for the ladies. The EDR Performance crew will be answering all maintenance and performance questions the ladies might have, as well as hands on demonstrations of daily bike maintenance and how to prep their bikes for the track days or even racing. Local favorite Zupan’s will be providing some of their great appetizers and coffee for the event. We will have several give aways as well throughout the event. Weather permitting there will also be a group street ride at the end of the gathering around lunch time with Misti and several other top local racers. We hope to see a lot of new female faces! EDR Performance is located at 1319 NW Johnson Street. In the heart of downtown Portland’s Pearl District. Open Sat 9:30-5:00 503.222.7223

Hardcard Holdings Signs Racer Ben Thompson To Management Deal

(Pebble Beach, CA)- Hardcard Holdings, LLC, announced today that AMA Superbike Series hopeful, Ben Thompson, has signed an agreement with Hardcard for management representation. Hardcard, led by industry veterans and company co-founders, Andy Leisner and John Farris, specializes in consulting, sales, marketing and brand management services connected to the motorsports industry. Hardcard has joined with AMA and MotoGP paddock regular Michael “Murph” Murphy to provide an expanding list of athlete services for AMA and World Championship competitors. “I’ve worked with top racers in both MotoGP and AMA for years on a variety of projects and often get asked for advice and career guidance by the racers. By tying into Hardcard and their corporate structure and client relationships, we can now take on a more formal role and really make a positive contribution to the career development of the racers that are interested in working with us,” said Murph. Said Thompson, “When I looked at what the Hardcard partners have accomplished in motorcycle racing and their business credentials, along with the great relationship I have with Murph, it was clear that this would be a strong step for my racing career. I am pumped to be working with these guys and am looking forward to getting a good program put together for the 2008 season”. About Ben Thompson In 2006, 23-year-old Alaska native Ben Thompson burst on to the AMA Superbike Championship scene at the season finale at Mid-Ohio Sports Car Course by qualifying on pole position in only his fourth AMA professional race ever. This incredible accomplishment followed two WERA National Championship Amateur titles in 2005 and two AMA Grand National Amateur Championship titles in 2006. In 2007, Ben competed in the last four AMA Superbike events. At the rain-plagued Mid-Ohio round Ben rode his personal, privateer Suzuki GSX-R1000 to a 14th place finish in the premier Superbike class. At Virginia International Raceway, Suzuki support team Millenium/KWS asked Ben to fill in for regular rider John Haner who was out ill. Ben raced both Superbike and Superstock, finishing 12th place in Superbike and 8th in Superstock. The two final rounds at Road Atlanta and Mazda Raceway Laguna Seca saw Ben in the role of substitute rider again for factory support team Rockwall Honda in the Supersport class. Ben displayed amazing speed, consistency and athleticism, as he competed in three different bike classes, riding two different brands. Over these two rounds, he placed his personal Suzuki as high as 11th place in Superbike, the Rockwall bike in 15th position in Supersport and 7th place in Superstock finishing ahead of many of the full factory riders and capping off a great 2007 effort. For Ben Thompson sponsorship/employment inquires contact: Murph (831) 464-3458 or [email protected] or see www.benthompsonracing.com About Hardcard Hardcard Holdings, LLC, is a leading motorsports management and consulting firm specializing in motorsports and motorcycle related marketing. Hardcard’s partners are VP/CEO-level executives with experience in management of racetracks, sanctioning bodies, brand management, licensed merchandise, sponsorship development, race teams and publishing. Hardcard partners have worked with many companies that have used motorcycling as a marketing platform including: Toyota, Chevrolet, Ford, Monster Energy, Progressive, Oakley and Fox. Current Hardcard clients include Indianapolis Motor Speedway, Barber Motorsports Park, Red Bull, Axio, Campos Creative Works and Bell Helmets see www.hardcard.net.

Teenage WERA Racer Lands Outside-of-industry Sponsorship For 2008 Season

NASCAR veteran Aaron Brown of Catawba, NC has signed DeJarnette Research Systems as a major sponsor for the 2008 season. Brown, who has been part of five Daytona 500 winning teams, currently consults for Craftsman truck and Busch car teams while maintaining AB-1 Motorsports, a motorcycle road race team running in the WERA race series out of his North Carolina race shop. The team’s new sponsor DeJarnette Research Systems is a 20 year old private medical imaging software company that is known for its performance workflow solutions and endless innovation. Dr. Wayne DeJarnette who is president and CEO is also a sponsor of the Johns Hopkins Lacrosse team. The partnership includes a cooperative marketing agreement with Lynch Motorsports, a Craftsman Truck team and the Dodge Motorsports land speed record attempt which Brown has been contracted to build and crew chief. The land speed record attempt will be run on the Bonneville Salt Flats mid October 2007 and driven by world speed record holder Russ Wicks. According to Brown, “This sponsorship is the coordination of multiple race disciplines designed to provide maximum value and increased exposure for our sponsor. I believe this is the first time this type of package has been done with a motorcycle team and we’re confident that more outside industry sponsors would see value in our unique marketing packages.” AB-1 Motorsports will field a two-bike support program for up-and-coming 16-year-old WERA racer James Rispoli in 2008.

FGSport Group Happy About Superbike World Championship Television Numbers In Spain

0

The World Superbike Championship confirms its place in the heart of passionate Spanish racing fans especially thanks to the efforts of Telecinco, the number one TV station in Spain, that transmits live all races of the Championship for the production-based racing bikes. The Superbike TV schedule of Telecinco is complete, with pre-race updates 30 minutes before the start and with live commentary. Furthermore eight members of Telecinco staff present at the circuit prepare special coverage and bulletins from all the tracks and they broadcast from Thursday to Sunday within the sports news section. The big efforts of Telecinco to promote in the best way the Superbike World Championship within an important motor sport nation have achieved really significant results in terms of audience data. The number of viewers during race one at the Valencia, Silverstone and Brands Hatch rounds represented a 26% audience share with an average audience of 1,700,000 viewers, with peak figures of 2,600,000 and a 34% share. To complete Telecinco’s Superbike coverage, their sister channel Telecinco Sport available on digital terrestrial television broadcasts Saturday’s Superpole and the Superstock 1000, Supersport and Superbike race 2 live. Paolo Vasile, Telecinco CEO, declared: “In Spain motor sport is followed greatly by the public and the races of Superbike World Championship, always spectacular and exciting, are having a growing success among our viewers. We are really satisfied with the results achieved in collaboration with FGSport.” Paolo Alberto Flammini, FGSport CEO, added: “The Superbike World Championship is experiencing a particularly positive moment with a continuous growing trend. I’m pleased to state that thanks to the efforts and professionalism of Telecinco, our Championship has conquered a top position of motor sport also in Spain.”

FIM Releases New Rules, Procedures For Homologation In 2008 Superbike, Supersport World Championships

Superbike & Supersport World Championships Superstock FIM Cup Changes to the Technical Rules for 2008 – Homologation The FIM-SBK Permanent Bureau, composed of Messrs Vito Ippolito, FIM President, and Maurizio Flammini, FGSport President, approved the new rules concerning the homologation procedure for Superbike, Supersport and Superstock motorcycles. 2.9 FIM HOMOLOGATION PROCEDURE FOR SUPERSTOCK, SUPERSPORT AND SUPERBIKE MOTORCYCLES Homologation is the official assessment made by the FIM for a particular model of motorcycle that a sufficient number of series production motorcycles have been built and put on sale to the public to justify classification in the relevant Sport Production class. 2.9.1 REQUIREMENTS FOR AN FIM HOMOLOGATION Application Any manufacturer of mass production motorcycles may apply for a FIM homologation of one or more of his models in order to qualify for competing in the Road Racing Superbike & Supersport World Championship and the Superstock World Cup as long as the model belongs to one of these classes. Eligibility requirements · Motorcycles must have a valid international homologation for road use or a national homologation for road use obtained in one of the signatory countries of the 1968 Vienna Convention. · The motorcycles must represent machines of mass production. · The motorcycles must be of current production. · The motorcycles are to be sold for every day use. · At the time of the FIM inspection for homologation, the motorcycles must be completely equipped with all road-using equipment. (e.g. full lighting equipment). · Only the original manufacturer may present the motorcycle for homologation. · The manufacturer must be a holder of an FIM licence for manufacturers. · If the motorcycle is presented with an engine from a motorcycle manufacturer different from the manufacturer requesting the homologation, a permission or commercial agreement must be presented at the time of the homologation request. · The motorcycle must have a manufacturer’s certificate of origin. N.B: If for marketing reasons or legal requirements, another type of carburation instruments is fitted to the model in a particular geographical area, these instruments must be replaced for competition by the homologated carburation instrument. 2.9.2 MINIMUM PRODUCTION QUANTITIES AND MARKET AVAILABILITY The minimum required production quantities consist of units with identical equipment intended for sale to customers. Evidence of production quantities must be certified by the manufacturer’s auditing firm and/or any other institution which may provide reliable documentation. This certificate must be written in English or French and the model/type must be specified. Market Availability and sale to the public may be demonstrated by waybills, bills of lading and/or any other import, export or customs documents duly certified by the relevant authority. 2.9.2.1 FIRST TIME APPLICATION FOR HOMOLOGATION A manufacturer requesting a homologation for the very first time in its existence must follow the procedure below. · The manufacturer must have produced at least a quantity of 125 motorcycles prior to the homologation inspection. The motorcycle must be on sale to the public at that time. · The minimum quantity of 500 units must be reached by the end of September of the current year. · The minimum quantity of 1000 units must be reached by the end of December of the current year. · From 2010 onwards the minimum quantity will be 3000 units. · All motorcycles must be identical to the model to be homologated with the same specifications. · Proof of production quantities must be provided by certified documentation as stated in Article 2.9.2. · The FIM will withdraw the homologation if these rules are not respected. 2.9.2.2 SUBSEQUENT HOMOLOGATIONS A manufacturer who has previously homologated a motorcycle and is requesting a homologation must follow the procedure below: · The manufacturer must have produced at least a quantity of 250 motorcycles prior to the homologation inspection. The motorcycle must be on sale to the public at that time. · The minimum quantity of 1000 units must be reached by the end of June of the current year. · From 2010 onwards the minimum quantity will be 3000 units. · All motorcycles must be identical to the model to be homologated with the same specifications. · Proof of production quantities must be provided by certified documentation as stated in Article 2.9.2. · The FIM will withdraw the homologation if these rules are not respected. 2.9.5 CALENDAR FOR APPLICATIONS, SUBMISSIONS & PUBLICATIONS · A homologation inspection is a complete verification and check of all drawings of to the corresponding parts, as well as the documentation for the necessary minimum quantities. These checks will be carried out by the FIM. · The deadline for receiving requests for homologation at the FIM CCR Secretariat is 60 days before the homologation inspection is to take place. · A newly homologated motorcycle model may race in the FIM Championship events 30 days following the inspection for homologation, provided that the homologation was granted. · Motorcycles homologated by January 31st may be used in the first race of the season even if the event is less than 30 days following the inspection provided that a homologation was granted. · At the latest four (4) weeks before the inspection for homologation by the FIM, manufacturers are required to send by e-mail the completed and signed Homologation forms 1, 2 and 3, together with all relating documentation and drawings to the FIM CCR Secretariat (with the exception of workshop manuals, that can be delivered when they are released to the importers). Missing or incomplete documents and/or drawings will postpone the homologation inspection until a full corrected set is available. The documents and drawings have to be sent in paper and in electronic form (*.pdf, *.jpg, *.doc ,*.txt to [email protected] and [email protected]) · At the latest 3 days before the date of the inspection, manufacturers must ensure that the parts requested by FIM are received at the indicated place which will be in a European country. · At the latest within 3 days before the date of the inspection by the FIM, manufacturers are required to send to the FIM by e-mail, proof of production quantities of the first lot of motorcycles, according to Art. 2.9.2. · If the inspection fails, the homologation is postponed until the established shortcomings have been resolved and at least for one (1) month. · The homologation forms will be studied by the CCR Technical Members and the FIM CTI Secretariat, to confirm that they are complete and correct prior to granting the homologation. · The manufacturer shall at all times be responsible for completing the homologation documents with the correct information. All dimensions must be given according to the metric system, excluding wheel dimensions, and with the required tolerances. · The manufacturer is entitled to request a notice in order to know whether the documents and drawings submitted by him are formally correct two (2) weeks before the homologation inspection date. · At the latest within fifteen (15) days after having successfully passed the homologation inspection, an updated list of the valid homologations is published including the new homologation. · Within 21 days of the homologation inspection, copies of the 1, 2 & 3 homologation forms and drawings will be available on the FIM website. 2.9.6 HOMOLOGATION APPLICATION, INSPECTION AND CONTROL · Only the original manufacturer may submit a request to the FIM CCR Secretariat for the homologation of a motorcycle. · In case of failing the inspection, the original manufacturer may apply for a new homologation, to a maximum of 2 more times in the same year, in each racing class. · The inspection of the motorcycle parts consigned by the manufacturer for homologation will be carried out according to the information requested on the forms produced by the FIM (Homologation Forms 1, 2 and 3). · The manufacturer must consign to the FIM the following parts: – Complete engine, including carburation instruments – Main frame – Swing arm and wheel spindles – Suspension linkages – Front fork crowns These parts will be checked in presence of manufacturer’s representatives and stored by the FIM in sealed boxes and moved by the Promoter to the SBK Championship events at the Superbike Technical Director’s discretion · The inspector/s must satisfy himself/themselves that the statements made on the production certificate (Form 2) are correct. · At the end of the parts and documents inspection, the inspector/s will sign the completed certificate of homologation. These signed homologation forms indicate that the manufacturer complies with the specifications mentioned on the homologation forms. · The FIM may check motorcycles homologated by FIM present in the dealers or importers shops. The motorcycles must be in conformity with the homologated model. The expenses for the disassembling of maximum two (2) units will be borne by the manufacturer. · In case of not achieved minimum production numbers in the prescribed time-limit, all the points counting towards the Manufacturers’ Championship in the current year will be withdrawn and further penalties may also be imposed. · Once a motorcycle has obtained the homologation, it may be used for racing in the corresponding class for a maximum period of 5 years, or until such time that the homologated motorcycle no longer complies with the technical rules. · The Manufacturer of the homologated model can request an extension of a homologation before the end of the 5 year homologation period. The FIM may grant an extension of the homologation period for an additional 2 years. The fee for this extension of the homologation period will be double the normal fee. · A homologation or an extension of the homologation will be granted only if the fee has been paid. 2.9.7 PARTS AND PRODUCT UPDATE Any change in the specifications of the following parts of a FIM homologated motorcycle will require a new homologation of the model: · Crankcase · Cylinder · Cylinder head · Crankshaft, connecting rods · Camshafts, valves · Carburation instruments · Frame: main dimensions [in relation to wheelbase, caster, steering head angle, relative location of the swing-arm, relative location of rear shock absorber(s) and linkages] · New range of engine prefix numbers · New range of frame prefix numbers 2.9.8 HOMOLOGATION OF PARTS AND PRODUCT UPDATE · Product updates on parts other than those stated in Article 2.9.7, such as the fairing or wheels require a homologation update. · The manufacturer must send a notice to the FIM CCR Secretariat requesting for a homologation update not later than 30 days before the first race in which the model containing new parts will compete. · With the formal notice, the manufacturer is required to send the 1, 2 and 3 homologation forms, together with all relating documentation about the parts and product update (the drawings of the old and new products/parts, etc.) including a statement with the VIN-Number pertinent to the updated parts and product, to the FIM CCR Secretariat, both in paper and electronic form. · At the latest within one (1) week before the homologation inspection by the FIM, manufacturers must ensure that the parts requested by the FIM are received at the indicated place which will be in a European state. · Only motorcycles that have higher VIN numbers than those stated by the manufacturer are allowed to race using the new updated parts. · The FIM will charge half of the homologation fee for a homologation update. · The FIM will withdraw the homologation if these rules are not respected.

Updated: Charpentier Fastest In Provisional World Supersport Qualifying Friday In Italy

2007 FIM Supersport World Championship Vallelunga, Italy September 28, 2007 Provisional Qualifying Results: 1. Sebastien CHARPENTIER (Honda CBR600RR), 1:39.733 2. Gianluca VIZZIELLO (Yamaha YZF-R6), 1:40.339 3. Kenan SOFUOGLU (Honda CBR600RR), 1:40.408 4. Katsuaki FUJIWARA (Honda CBR600RR), 1:40.775 5. Tommy HILL (Yamaha YZF-R6), 1:40.815 6. Craig JONES (Honda CBR600RR), 1:40.854 7. Josh BROOKES (Honda CBR600RR), 1:40.957 8. Broc PARKES (Yamaha YZF-R6), 1:40.969 9. Sebastien GIMBERT (Yamaha YZF-R6), 1:41.001 10. Arne TODE (Honda CBR600RR), 1:41.018 11. Massimo ROCCOLI (Yamaha YZF-R6), 1:41.135 12. David SALOM (Yamaha YZF-R6), 1:41.195 13. Javier FORES (Honda CBR600RR), 1:41.283 14. Joan LASCORZ (Honda CBR600RR), 1:41.320 15. Pere RIBA (Kawasaki ZX-6R), 1:41.356 16. David CHECA (Yamaha YZF-R6), 1:41.571 17. Miguel PRAIA (Honda CBR600RR), 1:41.594 18. Mattieu LAGRIVE (Honda CBR600RR), 1:41.596 19. Fabien FORET (Kawasaki ZX-6R), 1:41.651 20. Simone SANNA (Honda CBR600RR), 1:41.669 More, from a press release issued by HANNspree Ten Kate Honda: Charpentier tops the timesheets at Vallelunga The penultimate round of the 2007 World Supersport Championship started well for HANNspree Ten Kate Honda with Sébastien Charpentier in provisional pole position. Team-mate and 2007 World Supersport Champion Kenan Sofuoglu qualified as the third fastest rider. Unpredictable weather conditions meant that both riders opted out of the majority of the morning free practice, only joining the session in the final half. The track dried out during the afternoon as Charpentier and Sofuoglu took to the 4.110km circuit for the 45-minute official qualifying. Sofuoglu set a fastest lap early on and repeated the feat a further three times before the end of the session. He finished with a best time of 1’40.408. However, it was Charpentier who secured the premier spot on the timesheet with an impressive lap of 1.39.733. The Frenchman was the only rider to secure a 1.39 lap and goes into tomorrow’s second day qualifying as the potential pole sitter. Ronald ten Kate, Team Manager: “It’s been a good day for us but we still have quite a lot of work to do. Missing out on the session this morning meant we had a lot to do this afternoon. We are still playing around with the bike and we’ll be making quite a few changes overnight. I’m happy that we have already achieved the same lap times as we did in the test here. Tomorrow we can concentrate on race set-up and further development of the CBR600RR for 2008.” Sébastien Charpentier: “Today was ok – I am in first position. The track was not completely dry this morning so it was difficult. The first bike didn’t work so well for my style so I changed to my second bike and this was much better. On the first outing it felt stable and I like the set-up. We will work very hard tomorrow to prepare for the race and I just hope it is better weather.” Kenan Sofuoglu: “It was not bad today. We are trying something new on the bike, but it was difficult because of the rain this morning. That meant we had some catching up to do this afternoon, but I am confident that we can improve the times tomorrow. I am aiming for the front row and pole and I am hungry to win the race.”

Corser Tops First World Superbike Practice At Vallelunga

2007 FIM Superbike World Championship Vallelunga, Italy September 28, 2007 Free Practice One Results: 1. Troy CORSER (Yamaha YZF-R1), 1:38.155 2. Troy BAYLISS (Ducati 999 F07), 1:38.471 3. Max BIAGGI (Suzuki GSX-R1000K7), 1:38.945 4. Noriyuki HAGA (Yamaha YZF-R1), 1:39.077 5. James TOSELAND (Honda CBR1000RR), 1:39.122 6. Roberto ROLFO (Honda CBR1000RR), 1:39.226 7. Michel FABRIZIO (Honda CBR1000RR), 1:39.240 8. Lorenzo LANZI (Ducati 999F07), 1:39.602 9. Ruben XAUS (Ducati 999F06), 1:39.639 10. Regis LACONI (Kawasaki ZX-10R), 1:39.691 11. Marco BORCIANI (Ducati 999F06), 1:39.792 12. Shinichi NAKATOMI (Yamaha YZF-R1), 1:39.868 13. Karl MUGGERIDGE (Honda CBR1000RR), 1:40.029 14. Norino BRIGNOLA (Ducati 999F05), 1:40.237 15. Fonsi NIETO (Kawasaki ZX-10R), 1:40.549 16. Max NEUKIRCHNER (Suzuki GSX-R1000K6), 1:40.600 17. Yukio KAGAYAMA (Suzuki GSX-R1000K7), 1:40.635 18. Yoann TIBERIO (Honda CBR1000RR), 1:41.290 19. Jakub SMRZ (Ducati 999F05), 1:41.422 20. Vittorio IANNUZZO (Kawasaki ZX-10R), 1:41.536 21. Steve MARTIN (Suzuki GSX-R1000K6), 1:41.552 22. Luca MORELLI (Honda CBR1000RR), 1:41.762 23. Dean ELLISON (Ducati 999RS), 1:44.248

GMD Computrack Atlanta Moving To New Location

GMD Computrack Atlanta is proud to announce our relocation to better serve your motorcycle chassis and suspension needs. Effective October 8, 2007 we will be celebrating the opening of our bigger and better location at: 279 Confederate Ave. Jasper, GA 30143. Our new phone number will be 706-253-1148 and our new email address will be [email protected] We thank you for your trust and business over the last 14 years and invite you to come visit us at our new location soon.

Dainese Founder And Kevin Schwantz To Appear At Opening Of Dianese ‘D-Store’ In San Francisco

Dainese, the world’s leader in protective apparel for motorcycling, skiing, snowboarding, mountain biking, and watersports, has just opened their second D-Store in the USA! Dainese, an Italian company, was founded in 1972 by its current President, Lino Dainese, and started out as a manufacturer of leather pants for Motocross. Since its inception, the company’s history has been intertwined with that of riders who have made motorcycling history: from Giacomo Agostini, Barry Sheene, Freddy Spencer, Kenny Roberts and Kevin Schwantz in the World Speed Racing Championship to Edi Orioli and Franco Picco in the Paris-Dakar enduro race, champions were wearing Dainese gear as far back as the ’70s. Today, the tradition is carried on by the most illustrious names in motorcycling, Valentino Rossi, Max Biaggi, Chris Vermuellen, and many others. Design and technical innovation have expanded the protection and apparel collection to include a multitude of sports in addition to motorcycles. The new D-Store San Francisco carries the complete collection of lines that made Dainese famous over the years: motorbike, ski, snowboard, mountain bike and watersports. The Dainese D-STORES are brand specific stores, located in privileged positions in some of the most important cities in the world. The Motorbike, Bike, Ski, and Watersport collections are showcased in especially designed surroundings where customers can be served by the extremely qualified staff and take advantage of evolved services, such as the production of made-to-measure clothing, beta testing of new products, special events, the rapid procurement of articles, sizes and variants that may be temporarily out of stock, as well as the repair of damaged garments. Dainese D-STORES are currently located in, MILAN, ROME, PARIS, BARCELONA, TOKYO, STOCKHOLM, MOSCOW, MUNICH, WIEN, DÜSSELDORF, KÖLN, TAIPEI, SEOUL, and MANCHESTER. San Francisco is now home to the largest D-store in the world, with over 5000 square feet of showroom. Dainese believes the Bay Area is a perfect match for their collections promoting safety and protection in a city known worldwide for its values towards design and innovation. Dynamic sports are important for many Bay Area residents and Dainese is an ideal product line to support and enhance those lifestyles. In celebration of the opening of our newest D-Store, we will be having a grand opening party on Saturday, October 20th from 10:00am to 6:00pm. Very special guests Kevin Schwantz and founder and president Lino Dainese will be making appearances. Come enjoy snacks and refreshments as well as special pricing on select items throughout the store. The San Francisco D-store is located in 131 South Van Ness, in San Francisco and the hours are Tuesday through Friday from 11am to 7pm, Saturday 10am 6pm and Sundays from 12 to 5pm. Parking is available in the rear of the store off Howard Street. Experience Dainese at the D-Store San Francisco: the largest Dainese showroom in the world!

SunTrust MOTO-ST Endurance Series To Be Broadcast On SPEED Beginning November 20

DAYTONA BEACH, Fla. – The sights and sounds of the SunTrust MOTO-ST Series will thunder onto the airways beginning Tuesday, November 20. Starting with the season opener at Daytona International Speedway in March, each of the six events in this year’s series will be broadcast on SPEED TV per the following schedule. Running one hour in length, each show will feature spectacular non-stop action-packed racing and will be broadcast at 12:00 p.m. (EST). Daytona USA 300 Tuesday, November 20, 2007 Homestead 500K Tuesday, November 27, 2007 VIR 500K Tuesday, December 4, 2007 Road America 500K Tuesday, December 11, 2007 Iowa Speedway 500K Tuesday, December 18, 2007 8 Hours At Daytona Finale Tuesday, January 8, 2008 The newest professional two-wheeled tour in America, the SunTrust MOTO-ST Series is an incredible test of team endurance competition. Boasting a full contingent of some of North America’s most accomplished racers aboard three classes of thundering twin cylinder motorcycles, this series offers fans the chance to witness some of the most breathtaking competition seen in the United States. Be sure to tune in to SPEED and see and hear the thunder of this highly popular new series.

EDR Performance To Host A Female Rider/Racer Clinic This Weekend In Portland, Oregon

EDR Performance to host Women’s Sport and Road Racing Gathering this Saturday, September 29Th from 10am till 1pm With the ever increasing amount of female riders, we felt that a day for them was needed. Team EDR Performance/Kawasaki/Code Superbike School, AMA Pro racer Misti Hurst, will be on hand to talk with the ladies about riding techniques, getting into racing, sponsorships available, and specific female topics within riding/racing. KFG’s Barry Wressell will be on hand as well providing Suspension and Chassis setup/adjustments for the ladies. The EDR Performance crew will be answering all maintenance and performance questions the ladies might have, as well as hands on demonstrations of daily bike maintenance and how to prep their bikes for the track days or even racing. Local favorite Zupan’s will be providing some of their great appetizers and coffee for the event. We will have several give aways as well throughout the event. Weather permitting there will also be a group street ride at the end of the gathering around lunch time with Misti and several other top local racers. We hope to see a lot of new female faces! EDR Performance is located at 1319 NW Johnson Street. In the heart of downtown Portland’s Pearl District. Open Sat 9:30-5:00 503.222.7223

Hardcard Holdings Signs Racer Ben Thompson To Management Deal

(Pebble Beach, CA)- Hardcard Holdings, LLC, announced today that AMA Superbike Series hopeful, Ben Thompson, has signed an agreement with Hardcard for management representation. Hardcard, led by industry veterans and company co-founders, Andy Leisner and John Farris, specializes in consulting, sales, marketing and brand management services connected to the motorsports industry. Hardcard has joined with AMA and MotoGP paddock regular Michael “Murph” Murphy to provide an expanding list of athlete services for AMA and World Championship competitors. “I’ve worked with top racers in both MotoGP and AMA for years on a variety of projects and often get asked for advice and career guidance by the racers. By tying into Hardcard and their corporate structure and client relationships, we can now take on a more formal role and really make a positive contribution to the career development of the racers that are interested in working with us,” said Murph. Said Thompson, “When I looked at what the Hardcard partners have accomplished in motorcycle racing and their business credentials, along with the great relationship I have with Murph, it was clear that this would be a strong step for my racing career. I am pumped to be working with these guys and am looking forward to getting a good program put together for the 2008 season”. About Ben Thompson In 2006, 23-year-old Alaska native Ben Thompson burst on to the AMA Superbike Championship scene at the season finale at Mid-Ohio Sports Car Course by qualifying on pole position in only his fourth AMA professional race ever. This incredible accomplishment followed two WERA National Championship Amateur titles in 2005 and two AMA Grand National Amateur Championship titles in 2006. In 2007, Ben competed in the last four AMA Superbike events. At the rain-plagued Mid-Ohio round Ben rode his personal, privateer Suzuki GSX-R1000 to a 14th place finish in the premier Superbike class. At Virginia International Raceway, Suzuki support team Millenium/KWS asked Ben to fill in for regular rider John Haner who was out ill. Ben raced both Superbike and Superstock, finishing 12th place in Superbike and 8th in Superstock. The two final rounds at Road Atlanta and Mazda Raceway Laguna Seca saw Ben in the role of substitute rider again for factory support team Rockwall Honda in the Supersport class. Ben displayed amazing speed, consistency and athleticism, as he competed in three different bike classes, riding two different brands. Over these two rounds, he placed his personal Suzuki as high as 11th place in Superbike, the Rockwall bike in 15th position in Supersport and 7th place in Superstock finishing ahead of many of the full factory riders and capping off a great 2007 effort. For Ben Thompson sponsorship/employment inquires contact: Murph (831) 464-3458 or [email protected] or see www.benthompsonracing.com About Hardcard Hardcard Holdings, LLC, is a leading motorsports management and consulting firm specializing in motorsports and motorcycle related marketing. Hardcard’s partners are VP/CEO-level executives with experience in management of racetracks, sanctioning bodies, brand management, licensed merchandise, sponsorship development, race teams and publishing. Hardcard partners have worked with many companies that have used motorcycling as a marketing platform including: Toyota, Chevrolet, Ford, Monster Energy, Progressive, Oakley and Fox. Current Hardcard clients include Indianapolis Motor Speedway, Barber Motorsports Park, Red Bull, Axio, Campos Creative Works and Bell Helmets see www.hardcard.net.

Teenage WERA Racer Lands Outside-of-industry Sponsorship For 2008 Season

NASCAR veteran Aaron Brown of Catawba, NC has signed DeJarnette Research Systems as a major sponsor for the 2008 season. Brown, who has been part of five Daytona 500 winning teams, currently consults for Craftsman truck and Busch car teams while maintaining AB-1 Motorsports, a motorcycle road race team running in the WERA race series out of his North Carolina race shop. The team’s new sponsor DeJarnette Research Systems is a 20 year old private medical imaging software company that is known for its performance workflow solutions and endless innovation. Dr. Wayne DeJarnette who is president and CEO is also a sponsor of the Johns Hopkins Lacrosse team. The partnership includes a cooperative marketing agreement with Lynch Motorsports, a Craftsman Truck team and the Dodge Motorsports land speed record attempt which Brown has been contracted to build and crew chief. The land speed record attempt will be run on the Bonneville Salt Flats mid October 2007 and driven by world speed record holder Russ Wicks. According to Brown, “This sponsorship is the coordination of multiple race disciplines designed to provide maximum value and increased exposure for our sponsor. I believe this is the first time this type of package has been done with a motorcycle team and we’re confident that more outside industry sponsors would see value in our unique marketing packages.” AB-1 Motorsports will field a two-bike support program for up-and-coming 16-year-old WERA racer James Rispoli in 2008.

FGSport Group Happy About Superbike World Championship Television Numbers In Spain

The World Superbike Championship confirms its place in the heart of passionate Spanish racing fans especially thanks to the efforts of Telecinco, the number one TV station in Spain, that transmits live all races of the Championship for the production-based racing bikes. The Superbike TV schedule of Telecinco is complete, with pre-race updates 30 minutes before the start and with live commentary. Furthermore eight members of Telecinco staff present at the circuit prepare special coverage and bulletins from all the tracks and they broadcast from Thursday to Sunday within the sports news section. The big efforts of Telecinco to promote in the best way the Superbike World Championship within an important motor sport nation have achieved really significant results in terms of audience data. The number of viewers during race one at the Valencia, Silverstone and Brands Hatch rounds represented a 26% audience share with an average audience of 1,700,000 viewers, with peak figures of 2,600,000 and a 34% share. To complete Telecinco’s Superbike coverage, their sister channel Telecinco Sport available on digital terrestrial television broadcasts Saturday’s Superpole and the Superstock 1000, Supersport and Superbike race 2 live. Paolo Vasile, Telecinco CEO, declared: “In Spain motor sport is followed greatly by the public and the races of Superbike World Championship, always spectacular and exciting, are having a growing success among our viewers. We are really satisfied with the results achieved in collaboration with FGSport.” Paolo Alberto Flammini, FGSport CEO, added: “The Superbike World Championship is experiencing a particularly positive moment with a continuous growing trend. I’m pleased to state that thanks to the efforts and professionalism of Telecinco, our Championship has conquered a top position of motor sport also in Spain.”

FIM Releases New Rules, Procedures For Homologation In 2008 Superbike, Supersport World Championships

Superbike & Supersport World Championships Superstock FIM Cup Changes to the Technical Rules for 2008 – Homologation The FIM-SBK Permanent Bureau, composed of Messrs Vito Ippolito, FIM President, and Maurizio Flammini, FGSport President, approved the new rules concerning the homologation procedure for Superbike, Supersport and Superstock motorcycles. 2.9 FIM HOMOLOGATION PROCEDURE FOR SUPERSTOCK, SUPERSPORT AND SUPERBIKE MOTORCYCLES Homologation is the official assessment made by the FIM for a particular model of motorcycle that a sufficient number of series production motorcycles have been built and put on sale to the public to justify classification in the relevant Sport Production class. 2.9.1 REQUIREMENTS FOR AN FIM HOMOLOGATION Application Any manufacturer of mass production motorcycles may apply for a FIM homologation of one or more of his models in order to qualify for competing in the Road Racing Superbike & Supersport World Championship and the Superstock World Cup as long as the model belongs to one of these classes. Eligibility requirements · Motorcycles must have a valid international homologation for road use or a national homologation for road use obtained in one of the signatory countries of the 1968 Vienna Convention. · The motorcycles must represent machines of mass production. · The motorcycles must be of current production. · The motorcycles are to be sold for every day use. · At the time of the FIM inspection for homologation, the motorcycles must be completely equipped with all road-using equipment. (e.g. full lighting equipment). · Only the original manufacturer may present the motorcycle for homologation. · The manufacturer must be a holder of an FIM licence for manufacturers. · If the motorcycle is presented with an engine from a motorcycle manufacturer different from the manufacturer requesting the homologation, a permission or commercial agreement must be presented at the time of the homologation request. · The motorcycle must have a manufacturer’s certificate of origin. N.B: If for marketing reasons or legal requirements, another type of carburation instruments is fitted to the model in a particular geographical area, these instruments must be replaced for competition by the homologated carburation instrument. 2.9.2 MINIMUM PRODUCTION QUANTITIES AND MARKET AVAILABILITY The minimum required production quantities consist of units with identical equipment intended for sale to customers. Evidence of production quantities must be certified by the manufacturer’s auditing firm and/or any other institution which may provide reliable documentation. This certificate must be written in English or French and the model/type must be specified. Market Availability and sale to the public may be demonstrated by waybills, bills of lading and/or any other import, export or customs documents duly certified by the relevant authority. 2.9.2.1 FIRST TIME APPLICATION FOR HOMOLOGATION A manufacturer requesting a homologation for the very first time in its existence must follow the procedure below. · The manufacturer must have produced at least a quantity of 125 motorcycles prior to the homologation inspection. The motorcycle must be on sale to the public at that time. · The minimum quantity of 500 units must be reached by the end of September of the current year. · The minimum quantity of 1000 units must be reached by the end of December of the current year. · From 2010 onwards the minimum quantity will be 3000 units. · All motorcycles must be identical to the model to be homologated with the same specifications. · Proof of production quantities must be provided by certified documentation as stated in Article 2.9.2. · The FIM will withdraw the homologation if these rules are not respected. 2.9.2.2 SUBSEQUENT HOMOLOGATIONS A manufacturer who has previously homologated a motorcycle and is requesting a homologation must follow the procedure below: · The manufacturer must have produced at least a quantity of 250 motorcycles prior to the homologation inspection. The motorcycle must be on sale to the public at that time. · The minimum quantity of 1000 units must be reached by the end of June of the current year. · From 2010 onwards the minimum quantity will be 3000 units. · All motorcycles must be identical to the model to be homologated with the same specifications. · Proof of production quantities must be provided by certified documentation as stated in Article 2.9.2. · The FIM will withdraw the homologation if these rules are not respected. 2.9.5 CALENDAR FOR APPLICATIONS, SUBMISSIONS & PUBLICATIONS · A homologation inspection is a complete verification and check of all drawings of to the corresponding parts, as well as the documentation for the necessary minimum quantities. These checks will be carried out by the FIM. · The deadline for receiving requests for homologation at the FIM CCR Secretariat is 60 days before the homologation inspection is to take place. · A newly homologated motorcycle model may race in the FIM Championship events 30 days following the inspection for homologation, provided that the homologation was granted. · Motorcycles homologated by January 31st may be used in the first race of the season even if the event is less than 30 days following the inspection provided that a homologation was granted. · At the latest four (4) weeks before the inspection for homologation by the FIM, manufacturers are required to send by e-mail the completed and signed Homologation forms 1, 2 and 3, together with all relating documentation and drawings to the FIM CCR Secretariat (with the exception of workshop manuals, that can be delivered when they are released to the importers). Missing or incomplete documents and/or drawings will postpone the homologation inspection until a full corrected set is available. The documents and drawings have to be sent in paper and in electronic form (*.pdf, *.jpg, *.doc ,*.txt to [email protected] and [email protected]) · At the latest 3 days before the date of the inspection, manufacturers must ensure that the parts requested by FIM are received at the indicated place which will be in a European country. · At the latest within 3 days before the date of the inspection by the FIM, manufacturers are required to send to the FIM by e-mail, proof of production quantities of the first lot of motorcycles, according to Art. 2.9.2. · If the inspection fails, the homologation is postponed until the established shortcomings have been resolved and at least for one (1) month. · The homologation forms will be studied by the CCR Technical Members and the FIM CTI Secretariat, to confirm that they are complete and correct prior to granting the homologation. · The manufacturer shall at all times be responsible for completing the homologation documents with the correct information. All dimensions must be given according to the metric system, excluding wheel dimensions, and with the required tolerances. · The manufacturer is entitled to request a notice in order to know whether the documents and drawings submitted by him are formally correct two (2) weeks before the homologation inspection date. · At the latest within fifteen (15) days after having successfully passed the homologation inspection, an updated list of the valid homologations is published including the new homologation. · Within 21 days of the homologation inspection, copies of the 1, 2 & 3 homologation forms and drawings will be available on the FIM website. 2.9.6 HOMOLOGATION APPLICATION, INSPECTION AND CONTROL · Only the original manufacturer may submit a request to the FIM CCR Secretariat for the homologation of a motorcycle. · In case of failing the inspection, the original manufacturer may apply for a new homologation, to a maximum of 2 more times in the same year, in each racing class. · The inspection of the motorcycle parts consigned by the manufacturer for homologation will be carried out according to the information requested on the forms produced by the FIM (Homologation Forms 1, 2 and 3). · The manufacturer must consign to the FIM the following parts: – Complete engine, including carburation instruments – Main frame – Swing arm and wheel spindles – Suspension linkages – Front fork crowns These parts will be checked in presence of manufacturer’s representatives and stored by the FIM in sealed boxes and moved by the Promoter to the SBK Championship events at the Superbike Technical Director’s discretion · The inspector/s must satisfy himself/themselves that the statements made on the production certificate (Form 2) are correct. · At the end of the parts and documents inspection, the inspector/s will sign the completed certificate of homologation. These signed homologation forms indicate that the manufacturer complies with the specifications mentioned on the homologation forms. · The FIM may check motorcycles homologated by FIM present in the dealers or importers shops. The motorcycles must be in conformity with the homologated model. The expenses for the disassembling of maximum two (2) units will be borne by the manufacturer. · In case of not achieved minimum production numbers in the prescribed time-limit, all the points counting towards the Manufacturers’ Championship in the current year will be withdrawn and further penalties may also be imposed. · Once a motorcycle has obtained the homologation, it may be used for racing in the corresponding class for a maximum period of 5 years, or until such time that the homologated motorcycle no longer complies with the technical rules. · The Manufacturer of the homologated model can request an extension of a homologation before the end of the 5 year homologation period. The FIM may grant an extension of the homologation period for an additional 2 years. The fee for this extension of the homologation period will be double the normal fee. · A homologation or an extension of the homologation will be granted only if the fee has been paid. 2.9.7 PARTS AND PRODUCT UPDATE Any change in the specifications of the following parts of a FIM homologated motorcycle will require a new homologation of the model: · Crankcase · Cylinder · Cylinder head · Crankshaft, connecting rods · Camshafts, valves · Carburation instruments · Frame: main dimensions [in relation to wheelbase, caster, steering head angle, relative location of the swing-arm, relative location of rear shock absorber(s) and linkages] · New range of engine prefix numbers · New range of frame prefix numbers 2.9.8 HOMOLOGATION OF PARTS AND PRODUCT UPDATE · Product updates on parts other than those stated in Article 2.9.7, such as the fairing or wheels require a homologation update. · The manufacturer must send a notice to the FIM CCR Secretariat requesting for a homologation update not later than 30 days before the first race in which the model containing new parts will compete. · With the formal notice, the manufacturer is required to send the 1, 2 and 3 homologation forms, together with all relating documentation about the parts and product update (the drawings of the old and new products/parts, etc.) including a statement with the VIN-Number pertinent to the updated parts and product, to the FIM CCR Secretariat, both in paper and electronic form. · At the latest within one (1) week before the homologation inspection by the FIM, manufacturers must ensure that the parts requested by the FIM are received at the indicated place which will be in a European state. · Only motorcycles that have higher VIN numbers than those stated by the manufacturer are allowed to race using the new updated parts. · The FIM will charge half of the homologation fee for a homologation update. · The FIM will withdraw the homologation if these rules are not respected.