Home Blog Page 5024

Congressional Hearing Set For Sept. 10 On CPSIA Ban On Youth Motorsports Vehicles

PICKERINGTON, Ohio — Federal lawmakers have scheduled a hearing for Thursday, Sept. 10, to receive an update on the status of the Consumer Product Safety Improvement Act of 2008 (CPSIA) that essentially banned the sale of kids’ dirtbikes and ATVs, the American Motorcyclist Association (AMA) reports. The AMA is urging all concerned motorcyclists and ATVers to contact their federal lawmakers to exempt motorcycles and ATVs from the law, which took effect in February. The law stopped the sale of dirt bikes and ATVs designed for children age 12 and under, although the Consumer Product Safety Commission (CPSC) subsequently issued a stay of enforcement of the measure until May 2011. Under the law, all youth products containing lead must now have less than 300 parts per million by weight. The CPSC has interpreted the law to apply to various components of youth-model motorcycles and ATVs, including the engine, brakes, suspension, battery and other mechanical parts. Even though the lead levels in these parts are small, they are still above the minimum threshold. The Subcommittee on Commerce, Trade and Consumer Protection of the U.S. House Committee on Energy and Commerce will hold Thursday’s hearing, titled: “Consumer Product Safety Commission Oversight: Current Issues and a Vision for the Future.” CPSC Chairwoman Inez Tenenbaum will be the only testifier. This hearing is the first one sponsored by this subcommittee since the CPSIA passed 13 months ago. It is important that motorcyclists and ATV riders let Congress know that they are concerned about the lead-content requirements of the CPSIA, and that they want youth-model off-highway vehicles excluded from those requirements. Riders should contact their U.S. representatives and let them know how the CPSIA has created a severe and unwarranted disruption to families who ride together responsibly, and a deleterious effect on youth amateur racing. Because the fastest way to permanently address this issue is through legislation, riders should urge their representatives to support H.R. 1587, introduced by Rep. Denny Rehberg (R-At Large-Mont.), to exempt youth-sized motorcycles and ATVs from the CPSIA. You can find contact information for your elected officials at AmericanMotorcyclist.com. From the homepage, click on “Rights,” then “Issues & Legislation,” and enter your zip code in the “Find your Officials” box. Additionally, a prewritten e-mail is available for you to send to your representative immediately by following the “Take Action” option and entering your information. ATV riders can do the same by going through the Rapid Response Center on ATVAonline.com. It is particularly important to contact members of the Subcommittee on Commerce, Trade and Consumer Protection. They are U.S. Reps.: * Bobby Rush (D-Chicago-Tinley Park, Ill.), chairman * Jan Schakowsky (D-Chicago-Des Plaines, Ill.) vice chairwoman * George Radanovich (R-Oakdale-Kerman, Calif.), ranking minority member * Mary Bono Mack (R-Hemet-Blythe, Calif.) * Doris Matsui (D-Sacramento, Calif.) * Henry Waxman (D-Agoura Hills-Westlake Village, Calif.) (ex officio) * Diana DeGette (D-Denver, Colo.) * Kathy Castor (D-Tampa, Fla.) * Cliff Stearns (R-Ocala, Fla.) * John Barrow (D-Springfield-Crawfordville, Ga.) * Phil Gingrey, M.D. (R-Marietta-Rome, Ga.) * Bruce Braley (D-Cedar Falls-Dubuque, Iowa) * Ed Whitfield (R-Fulton-Casey, Ky.) * Steve Scalise (R-Hammond-Mandeville, La.) * John Sarbanes, M.D. (D-Baltimore City-Annapolis, Md.) * John Dingell (D-Detroit, Mich.) (ex officio) * Bart Stupak (D-U.P.-Alpena, Mich.) * Lee Terry (R-Omaha, Neb.) * G. K. Butterfield (D-Roanoke Rapids-New Bern, N.C.) * Sue Wilkins Myrick (R-Gastonia-Matthews, N.C.) * Frank Pallone, Jr. (D-Plainfield-Asbury Park, N.J.) * Anthony Weiner (D-Brooklyn-Queens, N.Y.) * Zachary Space (D-Athens-Millersburg, Ohio) * Betty Sutton (D-Lorain-Akron, Ohio) * John Sullivan (R-Bartlesville-Bixby, Okla.) * Tim Murphy (R-Pittsburgh-Greensburg, Pa.) * Joseph R. Pitts (R-Columbia-West Chester, Pa.) * Bart Gordon (D-Robertson-Marshall, Tenn.) * Joe Barton (R-Ennis-Crockett, Texas) (ex officio) * Charles Gonzalez (D-San Antonio-Kirby, Texas) * Gene Green (D-Cloverleaf, Texas) * Jim Matheson (D-St. George-Vernal, Utah) About the American Motorcyclist Association Since 1924, the AMA has protected the future of motorcycling and promoted the motorcycle lifestyle. AMA members come from all walks of life, and they navigate many different routes on their journey to the same destination: freedom on two wheels. As the world’s largest motorcycling organization, the AMA advocates for motorcyclists’ interests in the halls of local, state and federal government, the committees of international governing organizations, and the court of public opinion. Through member clubs, promoters and partners, the AMA sanctions more motorsports competition and motorcycle recreational events than any other organization in the world. AMA members receive money-saving discounts from dozens of well-known suppliers of motorcycle services, gear and apparel, bike rental, transport, hotel stays and more. Through its Motorcycle Hall of Fame Museum, the AMA preserves the heritage of motorcycling for future generations.

Spears Enterprises To Help Suspension Company Develop Parts For Suzuki SV650

LAS VEGAS, Nevada. – Spears Enterprises, an industry leader in high performance and service of all Suzuki motorcycles, has joined forces with RICOR Racing Shocks, the world’s leading manufacturer of inertia-active suspension systems for street and off-road vehicles, and today announced a partnership to develop the Intiminator for SV650 Racing. The partnership will see Spears Enterprises playing a significant role in testing the SV650 advancements of RICOR’s Intiminator, the first patented inertia-activated front fork shock absorber designed to fit motorcycles and the only product on the market that detects if the wheel is trying to move or if the chassis is trying to move, resulting in a more stable chassis and a faster wheel response over bumps. Spears Enterprises will use years of research and development experience, gained while developing products specifically designed for the SV650, to help create the next-generation Intiminator. “The Intiminator is an amazing item. This is the first product I have ever worked with that gives the racer/rider such confidence and allows them to concentrate on going faster,” said Gregg Spears, owner of Spears Enterprises. “All of our test racers have won all of their races since changing over to the Intiminator and have set many new track records for their class.” “Spears Enterprises is a dominating player in the worldwide racing circuit and has championed the courses with its innovative approach to racing,” said Brian Falter, owner and president of RICOR Racing Shocks. “Intiminators are becoming an increasingly prominent tool in track racing. This is one of Spears Enterprises racing strength, so this partnership is a logical fit.” Spears Enterprises-sponsored rider David Raff has taken first place in his first 6 Intiminator-equipped races while at Buttonwillow, Infineon and Thunderhill raceways and has also set new track records for the 650 production class. About RICOR Racing Shocks RICOR Racing Shocks is the world’s leading manufacturer of advanced technology shock systems for street and off-road vehicles. Shock systems are offered for Harley Davidson, Dual Sport, and Sport Bike vehicles. Vibration-reducing handlebar devices are offered for Harley Davidson motorcycles. Founded in 2005, RICOR Racing Shocks maintains its headquarters and a manufacturing and assembly plant in Las Vegas, Nevada for delivery to a customer base nationwide and abroad. For more information, please visit ~http://www.ricorshocks.com~ or call 888-425-1333. About Spears Enterprises Spears Enterprises is an industry leader in design and manufacturing of high performance Suzuki motorcycle parts with countless hours of research and development which has led to their products being designed primarily for the Suzuki SV650, Kawasaki 650 Ninja and the Kawasaki 250 Ninja. From the serious racer to the street rider, Spears Enterprises will dedicate their time to your program and getting the results you’re searching for. For more information, please visit ~http://www.spearsenterprises.com~ or call 209-923-4684.

More On Yamaha’s 2010 Model Lineup

Cypress, Calif. Introduced last season, the FZ6R continues to impress motorcycle journalists as the winner of multiple press tests. With the 2010 FZ6R Yamaha is continuing to define what to expect from an entry level sport bike. That’s why the FZ6R is packed with features that belie its price point; like a torquey 600cc four cylinder engine, fuel injection and a sleek full fairing. New comers to the sport will especially appreciate the low seat height and handlebars that put the rider comfortably in control and anyone can appreciate build quality usually reserved for models costing thousands of dollars more. Starting with the proven power plant from our championship winning supersport bikes the engine in the FZ6R has been optimized for smooth, usable power. The cylinder head, crankcase, intake and exhaust system and clutch and shifter have been designed to create an entirely new engine character. The end result is a fun to ride motorcycle that will appeal to entry-level riders that they won’t soon outgrow. An all new diamond-shaped steel frame keeps the seat height low enough to comfortably reach the ground while allowing responsive handling. A solidly mounted engine allows for the optimum balance of high vertical rigidity and comparatively low lateral rigidity for stability at speed and sharp cornering performance. Stylish bodywork lends the FZ6R a sporty aggressive look, borrowing aggressive lines from the YZF-R series with more extensive wind protection to match the more upright seating position. A low mount exhaust keeps the mass centralized while adding to the aggressive modern look of the bike. Additional features like the adjustable handlebar and seat position and full meter display with digital speedometer, analog tachometer, odometer/tripmeter, fuel gauge and water coolant gauge continue to set the FZ6R apart from others in its class. Now what’s your excuse for not getting the cool sportbike you always wanted? The 2010 FZ6R will be available in dealerships nationwide beginning in January with a starting MSRP of $7,390. The FZ6R will be available in Team Yamaha Blue/White, Pearl White/Rapid Red, Pearl White/Vivid Magenta and Raven. Full information on all Yamaha models can be found at ~http://www.yamaha-motor.com~. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Following its many motorcycle press awards, the custom chopper-inspired Raider is back for 2010. This motorcycle continues to turn heads anywhere it goes with its raked-out front end, fuel-injected V-twin engine, fat rear tire, aluminum frame, high quality paint and chrome and a fit and finish attention to detail like no other. This modern performance cruiser screams attitude. The 34-degree rake plus 6 degrees yoke angle gives total rake of 40 degrees and 102mm of trail, while bringing the fork closer to the steering axis, making it possible to achieve that custom look as well as neutral handling and straight-line cruising comfort. Raider and Raider S models are powered by a 113 cubic inch (1854cc) fuel-injected V-twin engine. Maximum torque, enhanced by EXUP, the exhaust power valve that maximizes power across the rev range, is achieved at just 2500 rpm. Aiding in handling and good looks is the fat 210-section radial back tire. Coupled with an aluminum frame and swing arm, the Raider and Raider S are designed to go like no other production cruiser as well. The 2009 Raider will be available in dealerships nationwide beginning September 2009 with a starting MSRP of $14,190, and Raider S, with more custom-look chrome accents, starting at $14,790. The 2009 Raider will be available in Candy Red and Liquid Silver colors. The Raider S will be available in Raven and Deep Blue and available in January. Full information on all Star models can be found at ~http://www.starmotorcycles.com~. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Think all baggers are created equal? Think again”¦..Star is pleased to introduce the 2010 Stratoliner Deluxe. Whether you’re traveling cross-country or crosstown, this new bagger is one of the most powerful and stylish ways to go. The Stratoliner Deluxe features a distinctive, wind shearing fairing that includes a handlebar-mounted audio control system with integrated high fidelity speakers, connectors for an iPod® jack and ultra cool shorty windscreen. To compliment the fairing a pair of large, color-matched, locking hard sidebags with handy one touch openers provide spacious storage for long hauls and short trips. The powerful and beautiful 113 cubic-inch (1854cc) air-cooled, pushrod V-twin has massive looks and performance. The computer controlled twin-bore downdraft electronic fuel injection with 12 hole injectors ensures optimum engine efficiency and throttle response in the widest possible range of conditions. Combined with the four valve cylinder heads with dual spark plugs, ceramic-composite-lined cylinders and 2 into-1 exhaust with O2 sensor and three way catalyst to reduce emissions, maximum torque is reached at just 2500 rpm for performance second to none. The long and low aluminum frame provides great looks and light handling unlike any other full-size cruiser with very few welds for a smooth, clean look and a near 50/50 weight distribution between both wheels. The light, Controlled-fill swingarm casting compliments the streamline style and reduces unsprung weight to assist in the great handling. Additional features such as 46 mm fork tubes with slant cut chrome covers, a tucked out-of-sight single shock with adjustable spring preload, a richly chromed 1.25 inch oversize handlebar and large front discs with monolock brake calipers add to the unmatched functionality of the chassis. A strong and light belt final drive routes power smoothly and efficiently to the rear wheel while the floating floorboards and adjustable heel/toe shifter provide a comfortable, low effort ride. The Neo-streamline design gives the Stratoliner Deluxe a completely distinctive look which is accented by a level of fit and finish that is second to none. Details such as the switchgear wiring being routed internal to the handlebar, a flangeless, teardrop fuel tank, 12-spoke wheels, chrome front brake master cylinder with integrated lever, a sculpted seat and special custom machining of the cooling fin edges give a jewel like appearance to the engine as light hits it from different angles. Additional details like Star quality paint and chrome, bright multireflector headlight, LED taillight and amber turn signals behind clear lenses complete the custom look. The 2010 Stratoliner Deluxe will be available in Star motorcycle dealerships nationwide beginning in January in a Raven finish with a starting MSRP of $17,490. The Star® Accessories Catalog is packed full of high-quality parts that invite Star owners to fully express their individuality. Full information on all Star models can be found at ~http://www.starmotorcycles.com~. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Introduced as the first cruiser in its class that doesn’t cut corners, the V Star 950 won the prestigious “Metric of the Year” award in 2009 from V-Twin® Magazine. The V Star 950 is the benchmark in the middleweight cruiser class, appealing to seasoned riders as well as those looking for a friendly entry-level cruiser. The air-cooled V-twin delivers plenty of distinctive, big-cruiser character and pulsing torque feel. With the seat height an extra-low 26.5 inches, the full-sized chassis has a long, low look and provides spacious comfort. Handling is sporty and responsive, great for curvy back roads and commuting around town as well as open-highway cruising. The 942cc 60° V-twin engine is both simple and sophisticated. Sure, there’s no-fuss air cooling for traditional looks. But inside you’ll find the reason for the surprisingly spirited performance: four-valve cylinder heads, ceramic-composite-lined cylinders, forged aluminum pistons, and fuel injection. The meticulously tuned 2-into-1 exhaust system has a throaty exhaust note, and also 3-way catalyst technology to reduce air pollution. The carefully designed chassis contributes to an exceptionally light feeling riders are sure to appreciate. The double-cradle steel main frame offers an ideal rigidity balance in the longitudinal, lateral, and torsional directions, using the engine as a stressed member. With the engine mounting position slightly forward for optimum front-rear weight distribution and its large, 18-inch front wheel, V Star 950 has outstanding handling performance. The V Star 950’s streamlined styling is defined as “New Style Classic.” Designers used the influence of a single, horizontal line along the entire body, almost as if the wind has sculpted the machine. The long, low look is accentuated by the headlight and low-profile fuel tank, and the openness around the engine and front wheel highlight the bike’s light appearance. The V Star 950 Tourer rolls out with a windshield, leather-wrapped hard sidebags, and a passenger backrest all standard, ready for the open road or the commute to school or work. Beautiful leather saddlebags complement the overall lines, while the windshield adds classic looks and functionality. Of course both versions of the 950 come with great features you can’t get anywhere else like steel fenders, belt drive, top quality paint and plenty of accessories to make it your own. The 2010 V Star 950 will be available in Star motorcycle dealerships nationwide beginning in September 2010 with a starting MSRP of $8090. The V Star 950 comes in Raven, Candy Red and Pearl White. The V Star 950 Tourer will be available in a Raven or Seashell color and with a starting MSRP of $9190. Full information on all Star models can be found at http://www.starmotorcycles.com. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Newly improved for 2010, the V Star 1300 Tourer is better than ever. Coming standard with hard leather-wrapped sidebags, passenger backrest and windshield, the touring package is designed from the factory so it’s styled consistently with the bike’s fluid lines. Now even more comfortable, changes include a new handlebar with more relaxed riding position, a newly contoured seat nearly a full inch lower, more chrome, a new tank badge and a new frame color. All of these changes compliment the Tourer’s modern classic styling and accent the distinctive Star look that make the 1300 one of the most desirable cruisers in its class. The change in handlebar bend brings the bars closer to the rider, for a more relaxed riding position and wider range of movement. In addition the shape of the seat has been redesigned with more of a “dish” shape for improved comfort and it allows riders to touch the ground easily, reducing the seat height to just 27.2 inches off the ground. Styling changes like the new 3-D emblem design on the fuel tank, a new chrome headlight housing, chrome belt guard and new gloss black finish on the frame further add to the high-quality look. Cruiser engines need to sound and feel a certain way, with big pulsing power and the sound and feel to back it up. The 80-cubic-inch (1304cc) liquid-cooled, fuel-injected V-twin produces excellent power across the board along with a highly stimulating exhaust note. The engine’s four valve cylinder head contains roller rocker arms, ceramic composite cylinder sleeves and forged connecting rods connected to a single pin crankshaft for true V twin sound and power. The cooling system routes liquid through hidden hoses and internal engine passages for air-cooled looks and liquid-cooled performance. The virtually maintenance free belt drive transfers power from the transmission to the wheel with authority and delivers a quicker, more impressive throttle response feeling than a shaft drive. Of course the 1300 comes with great features you can’t get anywhere else like a steel gas tank and fenders, seven spoke wheels and matching drive pulley, top quality paint, a bright multi-reflector headlight and amber turn signals with clear lenses that give a custom look. In addition the Star® Accessories Catalog is packed full of high-quality parts that invite Star owners to fully express their individuality. The updated V Star 1300 Tourer will be available in Star motorcycle dealerships nationwide beginning in September 2010 with a starting MSRP of $11,790 and available in Raven and Impact Blue. Full information on all Star models can be found at ~http://www.starmotorcycles.com~.

Yamaha YZF-R6 Gets Minor Upgrades For 2010

Cypress, Calif. Light, powerful and bristling with knowledge gained from years of racing, the YZF-R6 is the most advanced production 600cc motorcycle Yamaha or anybody else has ever built. The 2009 AMA Daytona 200 Champion and this year’s best selling supersport, it is no surprise that the YZF-R6 is back for 2010, ready to tackle the track and the street. Yamaha’s MotoGP technology made its way to the YZF-R6, including YCC-T (Yamaha Chip Controlled Throttle), an advanced fly-by-wire throttle system that translates wrist commands into seamless, smooth power delivery. New for 2010, the R6 gets a remapped Engine Control Unit and a new 100 mm longer muffler for increased performance. YCC-I (Yamaha Chip Controlled Intake) is a variable intake-length system that broadens the powerband and reinforces the R6’s amazing high-rev hit. The R6’s ramp-type slipper clutch greatly reduces engine braking for smoother high-speed corner entries. In the YZF-R6s chassis department, you’ll find a magnesium sub frame, titanium exhaust, and Controlled-Fill die-cast aluminum chassis parts. All this adds up to a bike that snaps into corners, clings to inside lines, and shoots itself down the next straight. The 2010 YZF-R6 will be available in dealerships nationwide beginning January 2010 with a starting MSRP of $10,490. The YZF-R6 will be available in Raven, Pearl White and Team Yamaha Blue/White. Full information on all Yamaha models can be found at ~http://www.yamaha-motor.com~

Yamaha Will Offer Rossi Replica YZF-R1 LE In 2010

Cypress, Calif. Don’t say we didn’t warn you to forget everything you ever knew about the supersport liter class. Moto journalists and consumers agree once you hear the growl of the YZF-R1, it is clear that this bike is unlike anything before. Winning on the World Superbike racing circuit and in the motorcycle press, the R1 was chosen as the 2009 Motorcycle of the Year by Motorcyclist Magazine for its MotoGP®- inspired engine and chassis technology and its luxurious fit and finish. New for 2010, the R1 will be offered in an LE Limited Edition complete with Valentino Rossi/Fiat Yamaha livery including the number “46” and “The Doctor” logos. Each LE will also contain a replica of Valentino’s signature on the fuel tank. It’s all about power delivery of power, to be exact. That’s because the R1 is the world’s first production motorcycle with a crossplane crankshaft. Originally pioneered in MotoGP racing with the M1, crossplane technology puts each crank pin 90 degrees from the next, with an uneven firing interval of 270-180-90-180 degrees. The result is incredibly smooth, roll-on power delivery with outrageous amounts of torque for a rush like you’ve never experienced before. The unique shape of the crossplane crank smoothes out fluctuations in inertial crankshaft torque to provide very linear power delivery as the engine’s combustion torque builds, giving the rider more linear throttle response with awesome power and traction exiting corners. Not just new, the R1’s new crossplane crank engine represents a complete paradigm shift. To make the crossplane crank viable an advanced ECU individually maps each cylinder’s ignition and fuel injection timing. This powerful electronics package also controls Yamaha Chip Control Intake and Chip Control Throttle (YCC-I, YCC-T). The inclusion of D-MODE variable throttle control function enables the rider to adjust performance characteristics to match a variety of riding conditions. In addition to standard mode mapped for optimum performance, the rider can select from A mode for sportier response in low to mid-speed range, and B mode for somewhat less sharp response for riding situations that require especially sensitive throttle operation. These 3 different maps at the push of a button allow the rider to choose the optimum power character for their riding situation. This revolutionary new engine is housed in an equally advanced chassis. Control filled die-cast frame rails balance high vertical rigidity with relatively low lateral rigidity for increased high speed stability while improving handling, especially while leaned over during corner exit. A control filled die-cast magnesium sub frame cuts weight far from the center of balance and contributes to concentration of mass. Visually the new R1 breaks new ground leading with twin projector beam headlights concentrated near newly placed forced air intake ducts. The sculpted body work features inner and outer shells controlling airflow around the bike at high speeds and forcing more cool air to the radiator and engine bay while eliminating the need for hot-air vents usually located at the sides of the radiator. More than the just the next-generation of supersport; the YZF-R1 represents a major breakthrough in supersport technology and performance. The 2010 R1 will be available in dealerships nationwide beginning in September 2009 with a starting MSRP of $13,290 and available in Raven, Pearl White and Team Yamaha Blue/White. The R1 LE will be available in January 2010 with a starting MSRP of $14,500 and available in Fiat Yamaha Team graphics. Full information on all Yamaha models can be found at ~http://www.yamaha-motor.com~.

Read What Local Newspapers Reported About AMA’s Event At New Jersey Motorsports Park

~http://www.philly.com/inquirer/sports/20090907_Motorcycle_championships_fill_Millville_raceway.html~ ~http://www.thedailyjournal.com/article/20090907/SPORTS/909070336~ ~http://www.courierpostonline.com/article/20090907/NEWS01/909070334/1006/Races-rev-up-numbers-at-motorsports-park~

Max Safety Fund Track Day Raises $12,908 To Improve Safety At Canadian Tracks

Another success accomplished towards the safety of the track motorcycle riders. Unfortunately these days, it looks like almost nothing can be accomplished without financial support from the BIG players in the industry. So having that in mind and Max Mercier’s desire for friendship and safety, Max’s father Michel, came up with the idea of a fundraiser track day in 2008. This event was organized in conjunction with the Annual “Max Memorial Breakfast” established in 2006 by Max’s good friend Rahul Dua. The Max memorial breakfast has always been a successful event and over the past three years, it has brought the entire racing community together to start the season on a positive note. We have been raising money to promote SAFETY and support for our tight knit community. This year’s breakfast was followed up with another great event as we elevated the level of effort and planning to make the second Max Safety Fund Track Day a phenomenal success on August 28th, 2009. “With the great organization by the key players involved, the desire of riding by the participants on that perfect sunny day, the camaraderie overwhelming the paddock and the sympathy that every one showed my wife Odette and I towards the devastating event that took place 4 years ago to our son Max, it was enough to keep me walking on clouds even until today”, said Michel Mercier from FAST riding school. It was a pleasure for the entire team to see a turn out of over 90 riders full of excitement and friendship combined with the desire to improve their personal safety on the race track. The volunteer team and the Mercier family are deeply touched yet again and that feels amazing. In the past few years “We purchased a fully Automated Cardiac Defibrillator/CPR assistance Unit as our first contribution to the Canadian Road Racing Community in 2007. Furthermore, last year we were able to concentrate our efforts on the SMP corner 2 (pro track) run off issues, with generous help from Shannonville Motorsports Park matching every dollar spent at the infamous pro track corner two” says Rahul Dua from GoLo Racing. A survey for corner improvements was available online at www.GoLoRacing.com in conjunction with the handouts provided at the riders meeting, Saturday morning, to get the riders’ feedback. The results showed the majority was in favour of fixing the Pro track corner two seeing that it was the biggest concern among riders. The Parts Canada Superbike finale at Shannonville, this past weekend, noticed the corner two improvements and they were tested and approved by the riders, allowing them to continue their contention in the exciting Parts Canada Superbike Series SMP round. “After confirming the numbers with our official treasurer Odette Mercier, the funds generated in 2009 reached the grand total of $12,908.00. This year has been the best Fundraising year for us and it may be the best year in Canadian road racing history” mentioned Rahul Dua and AJ Tibayan of Hot Lap Events. We would like to raise the bar in 2010 making use of all our possible resources. Any funds generated will be used towards improving the safety of the track riders. Who else should we ask but you the “RIDERS” themselves to give us all your feedback and suggestions? We would like to hear from you about the most critical safety concern. Your feedback is invaluable and can be submitted online ballot at the following link http://www.goloracing.com/maxMercierSurvey2009.htm or any websites mentioned below. www.Fastridingschool.com www.GoLoRacing.com www.HotLapEvents.com 2010 date will be announced at Toronto Motorcycle Show this winter and riders will be able to register for the day at Fast Riding School & Hot Lap Events booths. An online registration will also be available similar to this year’s event. A special thank you to all the key players: CRCA Marshals Quality Patient Transfer Ambulance Services Flair Photo and Don Empey photography Accelerated Technologies Shannonville Motorsports Park Canadian Motorcycle Association Hot Lap Events and their Volunteer Team Fast Racing School JD Graphics GoLo Racing Riders and Crew Jana Water Pat Gonsalves from Q107 HeyAddy.com All the participants

Ten Kate Honda’s Kiyonari Will Race BSB Event This Weekend At Croft Circuit

0

MCE Insurance British Superbike Championship Round 10 Croft, North Yorkshire Friday 11th to Sunday 13th September 2009 FORMER CHAMPION RETURNS TO BRITISH SUPERBIKES AT CROFT Former double British Superbike Champion and current World Superbike Championship rider Ryuichi Kiyonari will make a sensational return to the 2009 MCE Insurance British Superbike Championship at Croft this weekend (11/13th September). The 26-year-old Japanese rider will ride for the HM Plant Honda team, with whom he won the title in 2006 and 2007, in place of the injured Glen Richards, and is expected to take the challenge to runaway championship leader Leon Camier (Airwaves Yamaha). ‘Kiyo’ has been racing for multiple World Champions, Ten Kate Honda, in the World Superbike Championship for the past two seasons, and the ride is a one-off as Richards is expected to return at the following round at Silverstone, The former MotoGP rider has an impressive pedigree at the 2.125-mile North Yorkshire track, the home round for Honda team sponsors HM Plant who are based in Newcastle, winning four times, once in each of 2005 and 2006 and then taking the double ahead of his team-mate Jonathan Rea in 2007. “I’m really excited to be riding for the HM Plant Honda team again. I’m also very happy to race in BSB and especially at Croft. I love this circuit and won both races when I last raced there in 2007,” said Kiyonari. It should make for good racing as in round eight of the series at Brands Hatch last month, another WSB rider, Broc Parkes, competed as a wild card aboard his Kawasaki and ran Camier close in all three races and the GSE Racing team, who run the Airwaves bikes for Camier and Cumbrian team-mate James Ellison, know all about the strength of Kiyonari as he beat them to the title in both 2006 and 2007. Saturday’s action commences at 09.30 and sees the all-important qualifying sessions, including the exciting F1-style Swan Combi 50 Roll for Pole knockout qualifying session to set the grid for Sunday’s two Superbike races as well as the qualifying sessions for the other classes. Sunday’s action kicks off with the warm up sessions at 12.00 before the first British Superbike race which is scheduled to start at 13.30. However, during the morning, as well as there being an open paddock, there will be an hour-long Pit Walk for fans to meet the riders and that is scheduled for between 10.30 and 11.30. Adult admission costs £6.00 per adult on Friday, £12.00 per adult on Saturday and £26.00 per adult on Sunday. Children aged 15 and under are admitted FREE and there is FREE paddock access and car/bike parking. Weekend tickets costing £32.00 per adult are still available and for further information call Croft Circuit on 01325 721815. Timetable Saturday 12th September 09.30 – 09.55 Metzeler National Superstock 600 – Qualifying 1 10.00 – 10.50 2009 MCE Insurance British Superbikes – Free Practice 11.00 – 11.35 Fuchs Silkolene British Supersport – Qualifying 1 11.45 – 12.10 Relentless British 125cc – Qualifying 1 12.20 – 12.45 Metzeler National Superstock 1000 – Qualifying 1 —Interval— 13.45 – 14.50 British Superbikes – Swan Combi 50 Roll for Pole 15.05 – 15.40 Fuchs Silkolene British Supersport – Qualifying 2 15.50 – 16.25 Relentless British 125cc – Qualifying 2 16.35 – 17.00 Metzeler National Superstock 600 – Qualifying 2 17.10 – 17.35 Metzeler National Superstock 1000 – Qualifying 2 Sunday 13th September 07.00 Gates Open 10.30 – 11.30 Pit Lane Walkabout 12.00 – 12.10 2009 MCE Insurance British Superbikes – Warm Up 12.15 – 12.25 Relentless British 125cc – Warm Up 12.30 – 12.40 Metzeler National Superstock 600 – Warm Up 12.45 – 12.55 Fuchs Silkolene British Supersport – Warm Up 13.00 – 13.10 Metzeler National Superstock 600 – Warm Up 13.30 2009 MCE Insurance British Superbikes – Race 1 – 20 laps 14.15 Relentless British 125cc – 14 laps 15.00 Metzeler National Superstock 1000 – 15 laps 15.30 Fuchs Lubricants Rallycross Supercar Demonstration 15.50 Fuchs Silkolene British Supersport – 18 laps 16.35 2009 MCE Insurance British Superbikes – Race 2 – 20 laps 17.15 Metzeler National Superstock 600 – 14 laps

O’Halloran Joins Linxcel Seton Tuning Team For Remainder Of British Supersport Season

0

The Linxcel Seton Tuning team are proud to announce that Jason O’Halloran will be riding in the British Supersport Championship for the remainder of the 2009 season. Team Manager Phil Seton Said “I’m sure Jason will prove himself to be a valuable asset to the Linxcel Seton Tuning team. His professional attitude, willingness to work as hard as the whole team and undoubted ability are the attributes we were looking for from our Supersport rider. We are sure Jason will be able to challenge at the front end of the grid where our Supersport Bike deserves to be! ” Jason Said: – Thanks to Phil and the Linxcel Seton Tuning team for the opportunity. I’m look forward to working with the whole team. The last three meetings are at circuits I have already visited and I am look forward to running at the front of the Supersport championship for the rest of the year. Jason’s debut will be at Round 10 of the British Supersport championship at Croft in North Yorkshire on 11th-13th September 2009. The Linxcel-Seton Tuning would like to extend their gratitude to the following companies for their support in the 2009 season. Linxcel, Seton Tuning, Panther Security Systems, Standard Precision Engineering, TK Cope Moto, Motul, RST, HM Quickshifters, Esjot, Revolution Signs, GPR, PFM, Venhill, Powerbronze, Solo Corse, R&G, NGK, Dynapro, Lightech, DID, SBS, K-Tech, MCT, Profibre, MHP and Sigma, Amethyst Computer Services, and GBRacing, Colchester Engineering Systems, ASNU, 666 road racing.

More Senior Staff Changes At NGK Spark Plugs (USA), Inc.

Wixom, MI – NGK Spark Plugs (USA), Inc. announced the promotion of Michael Schwab to the position of Vice President of the Aftermarket Division. Schwab, a 20-year veteran in the aftermarket, has been with NGK since 1989 and previously served as Director of Sales and Marketing for North America. Prior to that, he served as General Manager for NGK Spark Plugs (U.S.A.). In his new role, Schwab will oversee sales and marketing functions for NGK’s Aftermarket and OES channels. He reports to Hideyuki Koiso, President and CEO for NGK. Schwab has been integral in leading NGK’s aftermarket efforts. He’s been especially involved with expanding NGK’s retail presence, expanding distribution while refining the company’s branding efforts. Under Schwab’s guidance, NGK’s social marketing endeavors have expanded the brand, reaching millions of new consumers. “The Aftermarket industry is an ever evolving marketplace. Opportunities to grow and succeed are much more challenging than ever. To succeed, we have to quickly adapt to change. We must continuously lead with innovative products, innovative thinking and innovative customer service”, stated Schwab. Schwab, a native of St. Louis, Missouri moved to the Wixom, Michigan headquarters in 2001 as Deputy General Manager. Through his efforts and ever increasing responsibility, Schwab has been able to increase service levels while positioning the company to succeed in the future. NGK Spark Plugs – World Leader in Spark Plug and Oxygen Sensor Technology Since 1936, NGK Spark Plugs has been the world leader in technology, innovation, and world-class quality in the design of spark plugs and oxygen sensors. Today, NGK manufactures NGK Spark Plugs and NTK Oxygen Sensors for virtually every automotive manufacturer in the world. NGK has built a reputation for quality and reliability, and a commitment to excellence continues to be the driving force behind the company’s advanced research and development programs. With state-of-the-art manufacturing, inventory, and distribution facilities, NGK is dedicated to providing customers with world-class products and services. In addition to serving OE automotive and aftermarket customers, NGK also produces spark plugs for motorcycle, power sports, marine and small engine manufacturers. NGK also offers complimentary product lines including resistor caps, spark plug wires, and high performance cables. In North America, NGK is headquartered in Wixom, MI and maintains manufacturing, inventory, and distribution facilities in Irvine, CA, Sissonville, WV, and Chicago, IL. Our Mission: “We improve life through the environmentally responsible manufacture and precise application of advanced ceramic and material technologies for all of North America. Focused on innovation and teamwork, we contribute to local and global economic growth by matching our products to our customers’ visions each day, exceeding their expectations in quality, value, service and performance.”

Congressional Hearing Set For Sept. 10 On CPSIA Ban On Youth Motorsports Vehicles

PICKERINGTON, Ohio — Federal lawmakers have scheduled a hearing for Thursday, Sept. 10, to receive an update on the status of the Consumer Product Safety Improvement Act of 2008 (CPSIA) that essentially banned the sale of kids’ dirtbikes and ATVs, the American Motorcyclist Association (AMA) reports. The AMA is urging all concerned motorcyclists and ATVers to contact their federal lawmakers to exempt motorcycles and ATVs from the law, which took effect in February. The law stopped the sale of dirt bikes and ATVs designed for children age 12 and under, although the Consumer Product Safety Commission (CPSC) subsequently issued a stay of enforcement of the measure until May 2011. Under the law, all youth products containing lead must now have less than 300 parts per million by weight. The CPSC has interpreted the law to apply to various components of youth-model motorcycles and ATVs, including the engine, brakes, suspension, battery and other mechanical parts. Even though the lead levels in these parts are small, they are still above the minimum threshold. The Subcommittee on Commerce, Trade and Consumer Protection of the U.S. House Committee on Energy and Commerce will hold Thursday’s hearing, titled: “Consumer Product Safety Commission Oversight: Current Issues and a Vision for the Future.” CPSC Chairwoman Inez Tenenbaum will be the only testifier. This hearing is the first one sponsored by this subcommittee since the CPSIA passed 13 months ago. It is important that motorcyclists and ATV riders let Congress know that they are concerned about the lead-content requirements of the CPSIA, and that they want youth-model off-highway vehicles excluded from those requirements. Riders should contact their U.S. representatives and let them know how the CPSIA has created a severe and unwarranted disruption to families who ride together responsibly, and a deleterious effect on youth amateur racing. Because the fastest way to permanently address this issue is through legislation, riders should urge their representatives to support H.R. 1587, introduced by Rep. Denny Rehberg (R-At Large-Mont.), to exempt youth-sized motorcycles and ATVs from the CPSIA. You can find contact information for your elected officials at AmericanMotorcyclist.com. From the homepage, click on “Rights,” then “Issues & Legislation,” and enter your zip code in the “Find your Officials” box. Additionally, a prewritten e-mail is available for you to send to your representative immediately by following the “Take Action” option and entering your information. ATV riders can do the same by going through the Rapid Response Center on ATVAonline.com. It is particularly important to contact members of the Subcommittee on Commerce, Trade and Consumer Protection. They are U.S. Reps.: * Bobby Rush (D-Chicago-Tinley Park, Ill.), chairman * Jan Schakowsky (D-Chicago-Des Plaines, Ill.) vice chairwoman * George Radanovich (R-Oakdale-Kerman, Calif.), ranking minority member * Mary Bono Mack (R-Hemet-Blythe, Calif.) * Doris Matsui (D-Sacramento, Calif.) * Henry Waxman (D-Agoura Hills-Westlake Village, Calif.) (ex officio) * Diana DeGette (D-Denver, Colo.) * Kathy Castor (D-Tampa, Fla.) * Cliff Stearns (R-Ocala, Fla.) * John Barrow (D-Springfield-Crawfordville, Ga.) * Phil Gingrey, M.D. (R-Marietta-Rome, Ga.) * Bruce Braley (D-Cedar Falls-Dubuque, Iowa) * Ed Whitfield (R-Fulton-Casey, Ky.) * Steve Scalise (R-Hammond-Mandeville, La.) * John Sarbanes, M.D. (D-Baltimore City-Annapolis, Md.) * John Dingell (D-Detroit, Mich.) (ex officio) * Bart Stupak (D-U.P.-Alpena, Mich.) * Lee Terry (R-Omaha, Neb.) * G. K. Butterfield (D-Roanoke Rapids-New Bern, N.C.) * Sue Wilkins Myrick (R-Gastonia-Matthews, N.C.) * Frank Pallone, Jr. (D-Plainfield-Asbury Park, N.J.) * Anthony Weiner (D-Brooklyn-Queens, N.Y.) * Zachary Space (D-Athens-Millersburg, Ohio) * Betty Sutton (D-Lorain-Akron, Ohio) * John Sullivan (R-Bartlesville-Bixby, Okla.) * Tim Murphy (R-Pittsburgh-Greensburg, Pa.) * Joseph R. Pitts (R-Columbia-West Chester, Pa.) * Bart Gordon (D-Robertson-Marshall, Tenn.) * Joe Barton (R-Ennis-Crockett, Texas) (ex officio) * Charles Gonzalez (D-San Antonio-Kirby, Texas) * Gene Green (D-Cloverleaf, Texas) * Jim Matheson (D-St. George-Vernal, Utah) About the American Motorcyclist Association Since 1924, the AMA has protected the future of motorcycling and promoted the motorcycle lifestyle. AMA members come from all walks of life, and they navigate many different routes on their journey to the same destination: freedom on two wheels. As the world’s largest motorcycling organization, the AMA advocates for motorcyclists’ interests in the halls of local, state and federal government, the committees of international governing organizations, and the court of public opinion. Through member clubs, promoters and partners, the AMA sanctions more motorsports competition and motorcycle recreational events than any other organization in the world. AMA members receive money-saving discounts from dozens of well-known suppliers of motorcycle services, gear and apparel, bike rental, transport, hotel stays and more. Through its Motorcycle Hall of Fame Museum, the AMA preserves the heritage of motorcycling for future generations.

Spears Enterprises To Help Suspension Company Develop Parts For Suzuki SV650

LAS VEGAS, Nevada. – Spears Enterprises, an industry leader in high performance and service of all Suzuki motorcycles, has joined forces with RICOR Racing Shocks, the world’s leading manufacturer of inertia-active suspension systems for street and off-road vehicles, and today announced a partnership to develop the Intiminator for SV650 Racing. The partnership will see Spears Enterprises playing a significant role in testing the SV650 advancements of RICOR’s Intiminator, the first patented inertia-activated front fork shock absorber designed to fit motorcycles and the only product on the market that detects if the wheel is trying to move or if the chassis is trying to move, resulting in a more stable chassis and a faster wheel response over bumps. Spears Enterprises will use years of research and development experience, gained while developing products specifically designed for the SV650, to help create the next-generation Intiminator. “The Intiminator is an amazing item. This is the first product I have ever worked with that gives the racer/rider such confidence and allows them to concentrate on going faster,” said Gregg Spears, owner of Spears Enterprises. “All of our test racers have won all of their races since changing over to the Intiminator and have set many new track records for their class.” “Spears Enterprises is a dominating player in the worldwide racing circuit and has championed the courses with its innovative approach to racing,” said Brian Falter, owner and president of RICOR Racing Shocks. “Intiminators are becoming an increasingly prominent tool in track racing. This is one of Spears Enterprises racing strength, so this partnership is a logical fit.” Spears Enterprises-sponsored rider David Raff has taken first place in his first 6 Intiminator-equipped races while at Buttonwillow, Infineon and Thunderhill raceways and has also set new track records for the 650 production class. About RICOR Racing Shocks RICOR Racing Shocks is the world’s leading manufacturer of advanced technology shock systems for street and off-road vehicles. Shock systems are offered for Harley Davidson, Dual Sport, and Sport Bike vehicles. Vibration-reducing handlebar devices are offered for Harley Davidson motorcycles. Founded in 2005, RICOR Racing Shocks maintains its headquarters and a manufacturing and assembly plant in Las Vegas, Nevada for delivery to a customer base nationwide and abroad. For more information, please visit ~http://www.ricorshocks.com~ or call 888-425-1333. About Spears Enterprises Spears Enterprises is an industry leader in design and manufacturing of high performance Suzuki motorcycle parts with countless hours of research and development which has led to their products being designed primarily for the Suzuki SV650, Kawasaki 650 Ninja and the Kawasaki 250 Ninja. From the serious racer to the street rider, Spears Enterprises will dedicate their time to your program and getting the results you’re searching for. For more information, please visit ~http://www.spearsenterprises.com~ or call 209-923-4684.

More On Yamaha’s 2010 Model Lineup

Cypress, Calif. Introduced last season, the FZ6R continues to impress motorcycle journalists as the winner of multiple press tests. With the 2010 FZ6R Yamaha is continuing to define what to expect from an entry level sport bike. That’s why the FZ6R is packed with features that belie its price point; like a torquey 600cc four cylinder engine, fuel injection and a sleek full fairing. New comers to the sport will especially appreciate the low seat height and handlebars that put the rider comfortably in control and anyone can appreciate build quality usually reserved for models costing thousands of dollars more. Starting with the proven power plant from our championship winning supersport bikes the engine in the FZ6R has been optimized for smooth, usable power. The cylinder head, crankcase, intake and exhaust system and clutch and shifter have been designed to create an entirely new engine character. The end result is a fun to ride motorcycle that will appeal to entry-level riders that they won’t soon outgrow. An all new diamond-shaped steel frame keeps the seat height low enough to comfortably reach the ground while allowing responsive handling. A solidly mounted engine allows for the optimum balance of high vertical rigidity and comparatively low lateral rigidity for stability at speed and sharp cornering performance. Stylish bodywork lends the FZ6R a sporty aggressive look, borrowing aggressive lines from the YZF-R series with more extensive wind protection to match the more upright seating position. A low mount exhaust keeps the mass centralized while adding to the aggressive modern look of the bike. Additional features like the adjustable handlebar and seat position and full meter display with digital speedometer, analog tachometer, odometer/tripmeter, fuel gauge and water coolant gauge continue to set the FZ6R apart from others in its class. Now what’s your excuse for not getting the cool sportbike you always wanted? The 2010 FZ6R will be available in dealerships nationwide beginning in January with a starting MSRP of $7,390. The FZ6R will be available in Team Yamaha Blue/White, Pearl White/Rapid Red, Pearl White/Vivid Magenta and Raven. Full information on all Yamaha models can be found at ~http://www.yamaha-motor.com~. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Following its many motorcycle press awards, the custom chopper-inspired Raider is back for 2010. This motorcycle continues to turn heads anywhere it goes with its raked-out front end, fuel-injected V-twin engine, fat rear tire, aluminum frame, high quality paint and chrome and a fit and finish attention to detail like no other. This modern performance cruiser screams attitude. The 34-degree rake plus 6 degrees yoke angle gives total rake of 40 degrees and 102mm of trail, while bringing the fork closer to the steering axis, making it possible to achieve that custom look as well as neutral handling and straight-line cruising comfort. Raider and Raider S models are powered by a 113 cubic inch (1854cc) fuel-injected V-twin engine. Maximum torque, enhanced by EXUP, the exhaust power valve that maximizes power across the rev range, is achieved at just 2500 rpm. Aiding in handling and good looks is the fat 210-section radial back tire. Coupled with an aluminum frame and swing arm, the Raider and Raider S are designed to go like no other production cruiser as well. The 2009 Raider will be available in dealerships nationwide beginning September 2009 with a starting MSRP of $14,190, and Raider S, with more custom-look chrome accents, starting at $14,790. The 2009 Raider will be available in Candy Red and Liquid Silver colors. The Raider S will be available in Raven and Deep Blue and available in January. Full information on all Star models can be found at ~http://www.starmotorcycles.com~. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Think all baggers are created equal? Think again”¦..Star is pleased to introduce the 2010 Stratoliner Deluxe. Whether you’re traveling cross-country or crosstown, this new bagger is one of the most powerful and stylish ways to go. The Stratoliner Deluxe features a distinctive, wind shearing fairing that includes a handlebar-mounted audio control system with integrated high fidelity speakers, connectors for an iPod® jack and ultra cool shorty windscreen. To compliment the fairing a pair of large, color-matched, locking hard sidebags with handy one touch openers provide spacious storage for long hauls and short trips. The powerful and beautiful 113 cubic-inch (1854cc) air-cooled, pushrod V-twin has massive looks and performance. The computer controlled twin-bore downdraft electronic fuel injection with 12 hole injectors ensures optimum engine efficiency and throttle response in the widest possible range of conditions. Combined with the four valve cylinder heads with dual spark plugs, ceramic-composite-lined cylinders and 2 into-1 exhaust with O2 sensor and three way catalyst to reduce emissions, maximum torque is reached at just 2500 rpm for performance second to none. The long and low aluminum frame provides great looks and light handling unlike any other full-size cruiser with very few welds for a smooth, clean look and a near 50/50 weight distribution between both wheels. The light, Controlled-fill swingarm casting compliments the streamline style and reduces unsprung weight to assist in the great handling. Additional features such as 46 mm fork tubes with slant cut chrome covers, a tucked out-of-sight single shock with adjustable spring preload, a richly chromed 1.25 inch oversize handlebar and large front discs with monolock brake calipers add to the unmatched functionality of the chassis. A strong and light belt final drive routes power smoothly and efficiently to the rear wheel while the floating floorboards and adjustable heel/toe shifter provide a comfortable, low effort ride. The Neo-streamline design gives the Stratoliner Deluxe a completely distinctive look which is accented by a level of fit and finish that is second to none. Details such as the switchgear wiring being routed internal to the handlebar, a flangeless, teardrop fuel tank, 12-spoke wheels, chrome front brake master cylinder with integrated lever, a sculpted seat and special custom machining of the cooling fin edges give a jewel like appearance to the engine as light hits it from different angles. Additional details like Star quality paint and chrome, bright multireflector headlight, LED taillight and amber turn signals behind clear lenses complete the custom look. The 2010 Stratoliner Deluxe will be available in Star motorcycle dealerships nationwide beginning in January in a Raven finish with a starting MSRP of $17,490. The Star® Accessories Catalog is packed full of high-quality parts that invite Star owners to fully express their individuality. Full information on all Star models can be found at ~http://www.starmotorcycles.com~. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Introduced as the first cruiser in its class that doesn’t cut corners, the V Star 950 won the prestigious “Metric of the Year” award in 2009 from V-Twin® Magazine. The V Star 950 is the benchmark in the middleweight cruiser class, appealing to seasoned riders as well as those looking for a friendly entry-level cruiser. The air-cooled V-twin delivers plenty of distinctive, big-cruiser character and pulsing torque feel. With the seat height an extra-low 26.5 inches, the full-sized chassis has a long, low look and provides spacious comfort. Handling is sporty and responsive, great for curvy back roads and commuting around town as well as open-highway cruising. The 942cc 60° V-twin engine is both simple and sophisticated. Sure, there’s no-fuss air cooling for traditional looks. But inside you’ll find the reason for the surprisingly spirited performance: four-valve cylinder heads, ceramic-composite-lined cylinders, forged aluminum pistons, and fuel injection. The meticulously tuned 2-into-1 exhaust system has a throaty exhaust note, and also 3-way catalyst technology to reduce air pollution. The carefully designed chassis contributes to an exceptionally light feeling riders are sure to appreciate. The double-cradle steel main frame offers an ideal rigidity balance in the longitudinal, lateral, and torsional directions, using the engine as a stressed member. With the engine mounting position slightly forward for optimum front-rear weight distribution and its large, 18-inch front wheel, V Star 950 has outstanding handling performance. The V Star 950’s streamlined styling is defined as “New Style Classic.” Designers used the influence of a single, horizontal line along the entire body, almost as if the wind has sculpted the machine. The long, low look is accentuated by the headlight and low-profile fuel tank, and the openness around the engine and front wheel highlight the bike’s light appearance. The V Star 950 Tourer rolls out with a windshield, leather-wrapped hard sidebags, and a passenger backrest all standard, ready for the open road or the commute to school or work. Beautiful leather saddlebags complement the overall lines, while the windshield adds classic looks and functionality. Of course both versions of the 950 come with great features you can’t get anywhere else like steel fenders, belt drive, top quality paint and plenty of accessories to make it your own. The 2010 V Star 950 will be available in Star motorcycle dealerships nationwide beginning in September 2010 with a starting MSRP of $8090. The V Star 950 comes in Raven, Candy Red and Pearl White. The V Star 950 Tourer will be available in a Raven or Seashell color and with a starting MSRP of $9190. Full information on all Star models can be found at http://www.starmotorcycles.com. More, from another press release issued by Yamaha Motor Corp., U.S.A.: Cypress, California Newly improved for 2010, the V Star 1300 Tourer is better than ever. Coming standard with hard leather-wrapped sidebags, passenger backrest and windshield, the touring package is designed from the factory so it’s styled consistently with the bike’s fluid lines. Now even more comfortable, changes include a new handlebar with more relaxed riding position, a newly contoured seat nearly a full inch lower, more chrome, a new tank badge and a new frame color. All of these changes compliment the Tourer’s modern classic styling and accent the distinctive Star look that make the 1300 one of the most desirable cruisers in its class. The change in handlebar bend brings the bars closer to the rider, for a more relaxed riding position and wider range of movement. In addition the shape of the seat has been redesigned with more of a “dish” shape for improved comfort and it allows riders to touch the ground easily, reducing the seat height to just 27.2 inches off the ground. Styling changes like the new 3-D emblem design on the fuel tank, a new chrome headlight housing, chrome belt guard and new gloss black finish on the frame further add to the high-quality look. Cruiser engines need to sound and feel a certain way, with big pulsing power and the sound and feel to back it up. The 80-cubic-inch (1304cc) liquid-cooled, fuel-injected V-twin produces excellent power across the board along with a highly stimulating exhaust note. The engine’s four valve cylinder head contains roller rocker arms, ceramic composite cylinder sleeves and forged connecting rods connected to a single pin crankshaft for true V twin sound and power. The cooling system routes liquid through hidden hoses and internal engine passages for air-cooled looks and liquid-cooled performance. The virtually maintenance free belt drive transfers power from the transmission to the wheel with authority and delivers a quicker, more impressive throttle response feeling than a shaft drive. Of course the 1300 comes with great features you can’t get anywhere else like a steel gas tank and fenders, seven spoke wheels and matching drive pulley, top quality paint, a bright multi-reflector headlight and amber turn signals with clear lenses that give a custom look. In addition the Star® Accessories Catalog is packed full of high-quality parts that invite Star owners to fully express their individuality. The updated V Star 1300 Tourer will be available in Star motorcycle dealerships nationwide beginning in September 2010 with a starting MSRP of $11,790 and available in Raven and Impact Blue. Full information on all Star models can be found at ~http://www.starmotorcycles.com~.

Yamaha YZF-R6 Gets Minor Upgrades For 2010

Cypress, Calif. Light, powerful and bristling with knowledge gained from years of racing, the YZF-R6 is the most advanced production 600cc motorcycle Yamaha or anybody else has ever built. The 2009 AMA Daytona 200 Champion and this year’s best selling supersport, it is no surprise that the YZF-R6 is back for 2010, ready to tackle the track and the street. Yamaha’s MotoGP technology made its way to the YZF-R6, including YCC-T (Yamaha Chip Controlled Throttle), an advanced fly-by-wire throttle system that translates wrist commands into seamless, smooth power delivery. New for 2010, the R6 gets a remapped Engine Control Unit and a new 100 mm longer muffler for increased performance. YCC-I (Yamaha Chip Controlled Intake) is a variable intake-length system that broadens the powerband and reinforces the R6’s amazing high-rev hit. The R6’s ramp-type slipper clutch greatly reduces engine braking for smoother high-speed corner entries. In the YZF-R6s chassis department, you’ll find a magnesium sub frame, titanium exhaust, and Controlled-Fill die-cast aluminum chassis parts. All this adds up to a bike that snaps into corners, clings to inside lines, and shoots itself down the next straight. The 2010 YZF-R6 will be available in dealerships nationwide beginning January 2010 with a starting MSRP of $10,490. The YZF-R6 will be available in Raven, Pearl White and Team Yamaha Blue/White. Full information on all Yamaha models can be found at ~http://www.yamaha-motor.com~

Yamaha Will Offer Rossi Replica YZF-R1 LE In 2010

Cypress, Calif. Don’t say we didn’t warn you to forget everything you ever knew about the supersport liter class. Moto journalists and consumers agree once you hear the growl of the YZF-R1, it is clear that this bike is unlike anything before. Winning on the World Superbike racing circuit and in the motorcycle press, the R1 was chosen as the 2009 Motorcycle of the Year by Motorcyclist Magazine for its MotoGP®- inspired engine and chassis technology and its luxurious fit and finish. New for 2010, the R1 will be offered in an LE Limited Edition complete with Valentino Rossi/Fiat Yamaha livery including the number “46” and “The Doctor” logos. Each LE will also contain a replica of Valentino’s signature on the fuel tank. It’s all about power delivery of power, to be exact. That’s because the R1 is the world’s first production motorcycle with a crossplane crankshaft. Originally pioneered in MotoGP racing with the M1, crossplane technology puts each crank pin 90 degrees from the next, with an uneven firing interval of 270-180-90-180 degrees. The result is incredibly smooth, roll-on power delivery with outrageous amounts of torque for a rush like you’ve never experienced before. The unique shape of the crossplane crank smoothes out fluctuations in inertial crankshaft torque to provide very linear power delivery as the engine’s combustion torque builds, giving the rider more linear throttle response with awesome power and traction exiting corners. Not just new, the R1’s new crossplane crank engine represents a complete paradigm shift. To make the crossplane crank viable an advanced ECU individually maps each cylinder’s ignition and fuel injection timing. This powerful electronics package also controls Yamaha Chip Control Intake and Chip Control Throttle (YCC-I, YCC-T). The inclusion of D-MODE variable throttle control function enables the rider to adjust performance characteristics to match a variety of riding conditions. In addition to standard mode mapped for optimum performance, the rider can select from A mode for sportier response in low to mid-speed range, and B mode for somewhat less sharp response for riding situations that require especially sensitive throttle operation. These 3 different maps at the push of a button allow the rider to choose the optimum power character for their riding situation. This revolutionary new engine is housed in an equally advanced chassis. Control filled die-cast frame rails balance high vertical rigidity with relatively low lateral rigidity for increased high speed stability while improving handling, especially while leaned over during corner exit. A control filled die-cast magnesium sub frame cuts weight far from the center of balance and contributes to concentration of mass. Visually the new R1 breaks new ground leading with twin projector beam headlights concentrated near newly placed forced air intake ducts. The sculpted body work features inner and outer shells controlling airflow around the bike at high speeds and forcing more cool air to the radiator and engine bay while eliminating the need for hot-air vents usually located at the sides of the radiator. More than the just the next-generation of supersport; the YZF-R1 represents a major breakthrough in supersport technology and performance. The 2010 R1 will be available in dealerships nationwide beginning in September 2009 with a starting MSRP of $13,290 and available in Raven, Pearl White and Team Yamaha Blue/White. The R1 LE will be available in January 2010 with a starting MSRP of $14,500 and available in Fiat Yamaha Team graphics. Full information on all Yamaha models can be found at ~http://www.yamaha-motor.com~.

Read What Local Newspapers Reported About AMA’s Event At New Jersey Motorsports Park

~http://www.philly.com/inquirer/sports/20090907_Motorcycle_championships_fill_Millville_raceway.html~ ~http://www.thedailyjournal.com/article/20090907/SPORTS/909070336~ ~http://www.courierpostonline.com/article/20090907/NEWS01/909070334/1006/Races-rev-up-numbers-at-motorsports-park~

Max Safety Fund Track Day Raises $12,908 To Improve Safety At Canadian Tracks

Another success accomplished towards the safety of the track motorcycle riders. Unfortunately these days, it looks like almost nothing can be accomplished without financial support from the BIG players in the industry. So having that in mind and Max Mercier’s desire for friendship and safety, Max’s father Michel, came up with the idea of a fundraiser track day in 2008. This event was organized in conjunction with the Annual “Max Memorial Breakfast” established in 2006 by Max’s good friend Rahul Dua. The Max memorial breakfast has always been a successful event and over the past three years, it has brought the entire racing community together to start the season on a positive note. We have been raising money to promote SAFETY and support for our tight knit community. This year’s breakfast was followed up with another great event as we elevated the level of effort and planning to make the second Max Safety Fund Track Day a phenomenal success on August 28th, 2009. “With the great organization by the key players involved, the desire of riding by the participants on that perfect sunny day, the camaraderie overwhelming the paddock and the sympathy that every one showed my wife Odette and I towards the devastating event that took place 4 years ago to our son Max, it was enough to keep me walking on clouds even until today”, said Michel Mercier from FAST riding school. It was a pleasure for the entire team to see a turn out of over 90 riders full of excitement and friendship combined with the desire to improve their personal safety on the race track. The volunteer team and the Mercier family are deeply touched yet again and that feels amazing. In the past few years “We purchased a fully Automated Cardiac Defibrillator/CPR assistance Unit as our first contribution to the Canadian Road Racing Community in 2007. Furthermore, last year we were able to concentrate our efforts on the SMP corner 2 (pro track) run off issues, with generous help from Shannonville Motorsports Park matching every dollar spent at the infamous pro track corner two” says Rahul Dua from GoLo Racing. A survey for corner improvements was available online at www.GoLoRacing.com in conjunction with the handouts provided at the riders meeting, Saturday morning, to get the riders’ feedback. The results showed the majority was in favour of fixing the Pro track corner two seeing that it was the biggest concern among riders. The Parts Canada Superbike finale at Shannonville, this past weekend, noticed the corner two improvements and they were tested and approved by the riders, allowing them to continue their contention in the exciting Parts Canada Superbike Series SMP round. “After confirming the numbers with our official treasurer Odette Mercier, the funds generated in 2009 reached the grand total of $12,908.00. This year has been the best Fundraising year for us and it may be the best year in Canadian road racing history” mentioned Rahul Dua and AJ Tibayan of Hot Lap Events. We would like to raise the bar in 2010 making use of all our possible resources. Any funds generated will be used towards improving the safety of the track riders. Who else should we ask but you the “RIDERS” themselves to give us all your feedback and suggestions? We would like to hear from you about the most critical safety concern. Your feedback is invaluable and can be submitted online ballot at the following link http://www.goloracing.com/maxMercierSurvey2009.htm or any websites mentioned below. www.Fastridingschool.com www.GoLoRacing.com www.HotLapEvents.com 2010 date will be announced at Toronto Motorcycle Show this winter and riders will be able to register for the day at Fast Riding School & Hot Lap Events booths. An online registration will also be available similar to this year’s event. A special thank you to all the key players: CRCA Marshals Quality Patient Transfer Ambulance Services Flair Photo and Don Empey photography Accelerated Technologies Shannonville Motorsports Park Canadian Motorcycle Association Hot Lap Events and their Volunteer Team Fast Racing School JD Graphics GoLo Racing Riders and Crew Jana Water Pat Gonsalves from Q107 HeyAddy.com All the participants

Ten Kate Honda’s Kiyonari Will Race BSB Event This Weekend At Croft Circuit

MCE Insurance British Superbike Championship Round 10 Croft, North Yorkshire Friday 11th to Sunday 13th September 2009 FORMER CHAMPION RETURNS TO BRITISH SUPERBIKES AT CROFT Former double British Superbike Champion and current World Superbike Championship rider Ryuichi Kiyonari will make a sensational return to the 2009 MCE Insurance British Superbike Championship at Croft this weekend (11/13th September). The 26-year-old Japanese rider will ride for the HM Plant Honda team, with whom he won the title in 2006 and 2007, in place of the injured Glen Richards, and is expected to take the challenge to runaway championship leader Leon Camier (Airwaves Yamaha). ‘Kiyo’ has been racing for multiple World Champions, Ten Kate Honda, in the World Superbike Championship for the past two seasons, and the ride is a one-off as Richards is expected to return at the following round at Silverstone, The former MotoGP rider has an impressive pedigree at the 2.125-mile North Yorkshire track, the home round for Honda team sponsors HM Plant who are based in Newcastle, winning four times, once in each of 2005 and 2006 and then taking the double ahead of his team-mate Jonathan Rea in 2007. “I’m really excited to be riding for the HM Plant Honda team again. I’m also very happy to race in BSB and especially at Croft. I love this circuit and won both races when I last raced there in 2007,” said Kiyonari. It should make for good racing as in round eight of the series at Brands Hatch last month, another WSB rider, Broc Parkes, competed as a wild card aboard his Kawasaki and ran Camier close in all three races and the GSE Racing team, who run the Airwaves bikes for Camier and Cumbrian team-mate James Ellison, know all about the strength of Kiyonari as he beat them to the title in both 2006 and 2007. Saturday’s action commences at 09.30 and sees the all-important qualifying sessions, including the exciting F1-style Swan Combi 50 Roll for Pole knockout qualifying session to set the grid for Sunday’s two Superbike races as well as the qualifying sessions for the other classes. Sunday’s action kicks off with the warm up sessions at 12.00 before the first British Superbike race which is scheduled to start at 13.30. However, during the morning, as well as there being an open paddock, there will be an hour-long Pit Walk for fans to meet the riders and that is scheduled for between 10.30 and 11.30. Adult admission costs £6.00 per adult on Friday, £12.00 per adult on Saturday and £26.00 per adult on Sunday. Children aged 15 and under are admitted FREE and there is FREE paddock access and car/bike parking. Weekend tickets costing £32.00 per adult are still available and for further information call Croft Circuit on 01325 721815. Timetable Saturday 12th September 09.30 – 09.55 Metzeler National Superstock 600 – Qualifying 1 10.00 – 10.50 2009 MCE Insurance British Superbikes – Free Practice 11.00 – 11.35 Fuchs Silkolene British Supersport – Qualifying 1 11.45 – 12.10 Relentless British 125cc – Qualifying 1 12.20 – 12.45 Metzeler National Superstock 1000 – Qualifying 1 —Interval— 13.45 – 14.50 British Superbikes – Swan Combi 50 Roll for Pole 15.05 – 15.40 Fuchs Silkolene British Supersport – Qualifying 2 15.50 – 16.25 Relentless British 125cc – Qualifying 2 16.35 – 17.00 Metzeler National Superstock 600 – Qualifying 2 17.10 – 17.35 Metzeler National Superstock 1000 – Qualifying 2 Sunday 13th September 07.00 Gates Open 10.30 – 11.30 Pit Lane Walkabout 12.00 – 12.10 2009 MCE Insurance British Superbikes – Warm Up 12.15 – 12.25 Relentless British 125cc – Warm Up 12.30 – 12.40 Metzeler National Superstock 600 – Warm Up 12.45 – 12.55 Fuchs Silkolene British Supersport – Warm Up 13.00 – 13.10 Metzeler National Superstock 600 – Warm Up 13.30 2009 MCE Insurance British Superbikes – Race 1 – 20 laps 14.15 Relentless British 125cc – 14 laps 15.00 Metzeler National Superstock 1000 – 15 laps 15.30 Fuchs Lubricants Rallycross Supercar Demonstration 15.50 Fuchs Silkolene British Supersport – 18 laps 16.35 2009 MCE Insurance British Superbikes – Race 2 – 20 laps 17.15 Metzeler National Superstock 600 – 14 laps

O’Halloran Joins Linxcel Seton Tuning Team For Remainder Of British Supersport Season

The Linxcel Seton Tuning team are proud to announce that Jason O’Halloran will be riding in the British Supersport Championship for the remainder of the 2009 season. Team Manager Phil Seton Said “I’m sure Jason will prove himself to be a valuable asset to the Linxcel Seton Tuning team. His professional attitude, willingness to work as hard as the whole team and undoubted ability are the attributes we were looking for from our Supersport rider. We are sure Jason will be able to challenge at the front end of the grid where our Supersport Bike deserves to be! ” Jason Said: – Thanks to Phil and the Linxcel Seton Tuning team for the opportunity. I’m look forward to working with the whole team. The last three meetings are at circuits I have already visited and I am look forward to running at the front of the Supersport championship for the rest of the year. Jason’s debut will be at Round 10 of the British Supersport championship at Croft in North Yorkshire on 11th-13th September 2009. The Linxcel-Seton Tuning would like to extend their gratitude to the following companies for their support in the 2009 season. Linxcel, Seton Tuning, Panther Security Systems, Standard Precision Engineering, TK Cope Moto, Motul, RST, HM Quickshifters, Esjot, Revolution Signs, GPR, PFM, Venhill, Powerbronze, Solo Corse, R&G, NGK, Dynapro, Lightech, DID, SBS, K-Tech, MCT, Profibre, MHP and Sigma, Amethyst Computer Services, and GBRacing, Colchester Engineering Systems, ASNU, 666 road racing.

More Senior Staff Changes At NGK Spark Plugs (USA), Inc.

Wixom, MI – NGK Spark Plugs (USA), Inc. announced the promotion of Michael Schwab to the position of Vice President of the Aftermarket Division. Schwab, a 20-year veteran in the aftermarket, has been with NGK since 1989 and previously served as Director of Sales and Marketing for North America. Prior to that, he served as General Manager for NGK Spark Plugs (U.S.A.). In his new role, Schwab will oversee sales and marketing functions for NGK’s Aftermarket and OES channels. He reports to Hideyuki Koiso, President and CEO for NGK. Schwab has been integral in leading NGK’s aftermarket efforts. He’s been especially involved with expanding NGK’s retail presence, expanding distribution while refining the company’s branding efforts. Under Schwab’s guidance, NGK’s social marketing endeavors have expanded the brand, reaching millions of new consumers. “The Aftermarket industry is an ever evolving marketplace. Opportunities to grow and succeed are much more challenging than ever. To succeed, we have to quickly adapt to change. We must continuously lead with innovative products, innovative thinking and innovative customer service”, stated Schwab. Schwab, a native of St. Louis, Missouri moved to the Wixom, Michigan headquarters in 2001 as Deputy General Manager. Through his efforts and ever increasing responsibility, Schwab has been able to increase service levels while positioning the company to succeed in the future. NGK Spark Plugs – World Leader in Spark Plug and Oxygen Sensor Technology Since 1936, NGK Spark Plugs has been the world leader in technology, innovation, and world-class quality in the design of spark plugs and oxygen sensors. Today, NGK manufactures NGK Spark Plugs and NTK Oxygen Sensors for virtually every automotive manufacturer in the world. NGK has built a reputation for quality and reliability, and a commitment to excellence continues to be the driving force behind the company’s advanced research and development programs. With state-of-the-art manufacturing, inventory, and distribution facilities, NGK is dedicated to providing customers with world-class products and services. In addition to serving OE automotive and aftermarket customers, NGK also produces spark plugs for motorcycle, power sports, marine and small engine manufacturers. NGK also offers complimentary product lines including resistor caps, spark plug wires, and high performance cables. In North America, NGK is headquartered in Wixom, MI and maintains manufacturing, inventory, and distribution facilities in Irvine, CA, Sissonville, WV, and Chicago, IL. Our Mission: “We improve life through the environmentally responsible manufacture and precise application of advanced ceramic and material technologies for all of North America. Focused on innovation and teamwork, we contribute to local and global economic growth by matching our products to our customers’ visions each day, exceeding their expectations in quality, value, service and performance.”