Nicky Hayden Fastest On First Day Of Post-race MotoGP Testing At Brno

Nicky Hayden Fastest On First Day Of Post-race MotoGP Testing At Brno

© 2005, Roadracing World Publishing, Inc.

Categories:

PERFORMANCE BOOST FROM REVISED NINJA ZX-RR ENGINE Following their points scoring finishes in yesterday’s Czech Grand Prix Kawasaki riders, Shinya Nakano and Alex Hofmann, were back on track at the Brno circuit today, to continue the development of Kawasaki’s Ninja ZX-RR MotoGP machine. For Nakano, the aim of today’s test was to evaluate the latest version of Kawasaki’s 990cc, inline four-cylinder Ninja ZX-RR engine, comparing it during back-to-back tests with the bike that the Japanese rider took to twelfth place in yesterday’s race. With more revs and improved top end power from the revised engine, Nakano was able to match his lap times from yesterday’s race, circulating the 5.4km Brno circuit today with a best time of 1’59.6s. While his Japanese teammate concentrated on the engine, Hofmann’s test schedule focussed on tyre testing with Bridgestone and the evaluation of revised chassis components on his Ninja ZX-RR. The 25-year-old German rider tested a new specification front fork from Öhlins, which both Kawasaki riders have now confirmed improves stability of the Ninja ZX-RR under braking. Hofmann also tested new carbon brakes from Brembo, designed to offer more consistent operation and improved durability under extreme high temperatures. The Kawasaki pilot then completed his test schedule with two endurance runs for Bridgestone, using rear tyres with the same profile and construction – although with different compounds – to the tyre that took Loris Capirossi to a podium finish in yesterday’s Czech Grand Prix. Nakano will continue evaluation of the latest specification Ninja ZX-RR engine tomorrow, together with a revised exhaust system from Akrapovic. With near perfect test conditions at the Brno circuit today, Hofmann was able to complete his test programme ahead of schedule and will not ride alongside his teammate tomorrow. Shinya Nakano: 1’59.6 (64 Laps) “The latest engine is a definite improvement; I could feel straight away that there was more top-end power. The power also doesn’t drop off as steeply at the top of the rev range, there’s more over-rev, and this gives you more options on gear selection for some corners. I tried a shorter gear through some of the turns today that would not have been possible with the previous specification engine. We still have some development work to do, but first are positive.” Alex Hofmann: 1’59.9 (67 Laps) “It’s always hard testing after a race, but today’s test has been very productive. The new brake discs and pads from Brembo worked well on the bike, although we won’t really see the benefits of this new system until Motegi, which is always hard on brakes. We also tested a new specification front fork that improved the stability of the bike under braking. Finally I did two endurance runs for Bridgestone and, although it was hard work, I was happy to see that my lap times stayed consistent throughout.” Naoya Kaneko: Technical Coordinator “Shinya’s feedback on the latest version of our Ninja ZX-RR engine was very positive, which confirms that our development programme is moving in the right direction. Shinya will continue the engine evaluation tomorrow using a slightly different exhaust system. Alex’s comments about the new carbon brake set-up from Brembo were also positive, and we’re confident that the new system will eliminate some of the problems that he suffered at Motegi last year.” More, from a press release issued by Telefonica Movistar Honda: FIRST DAY OF TESTING FOR THE MOVISTAR HONDA TEAM AT BRNO Brno, 29th August 2005 First day of testing for the MotoGP teams at Brno after the Czech Republic GP. Marco Melandri started to test around noon while his team mate Sete Gibernau, as scheduled, tested only in the afternoon. The Spanish rider tested this afternoon with the goal to understand what happened yesterday during the race. SETE GIBERNAU (34 laps, 1’59″00): “the main goal of today’s test session was to understand the problems we had yesterday during the race. In order to understand what happened I have lapped today with the bike in the same configuration used for the race. We haven’t changed anything and we have used the same tyres of the warm up and the race. We have gathered important data that we are going to analyse in order to understand. I hope that tomorrow we can face the second day of testing with clearer ideas.” MARCO MELANDRI (62 laps, 1’59.656): “this test session is very important for us, in fact we are testing different solutions in order to improve the traction. I’m quite small and for me it’s a problem to load the back of the bike so I loose in traction. Today I was not looking for a fast lap. I tried instead to lap consistently in order to see how the bike reacts in the second part of the race. Today we tested a chassis slightly modified. It’s too early to tell which are the advantages, tomorrow I will go on doing some comparative testing.” UNOFFICIAL LAP TIMES 1. Nicky Hayden (USA/Honda) 1:57.602 2. Valentino Rossi (Ita/Yamaha) 1:58.969 3. Colin Edwards (Usa/Yamaha) 1:58.972 4. Troy Bayliss (Aus/Honda) 1:58:981 5. Sete Gibernau (Sp/Honda) 1:59.00 “¦ 13 Marco Melandri (Ita/Honda) 1:59.656

Latest Posts

Roadracing World Young Guns 2024: Rossi Moor

Roadracing World started this exclusive special feature recognizing the most...

ASRA Adds August 2-4 Event At VIR

ASRA Adds Premier Motorcycle Race Event at VIR to...

MotoAmerica: Honda Posts Contingency In Mini Cup

Honda to Support MotoAmerica Mini Cup   April 17, 2024 — ALPHARETTA,...

MotoAmerica: How To Watch All The Action From Road Atlanta

MotoAmerica: How To Watch MotoAmerica Superbikes at Road Atlanta It's...

MotoAmerica Previews The 2024 Steel Commander Superbike Championship

Road Atlanta Preview: 10th Anniversary Season Set To Begin...